SSH to second internet connection
I have a 2800 series router with 2 internet connections from different providers. I can SSH to one internet address but not to the other.
Is it possible to setup the router so that SSH will work to both IP addressess?
No I cant ping it as I have ping turned off on both connections. I will turn it on and check later
today. Internet access was verified across both connections from inside though.
When I try to connect with an SSH client it times out. I don't see anything in the logs even with debug SSH turned on.
This is a zone based configuration. I have reviewed the configuration to see if anything is different from one side to other and couldn't see anything different. The only thing I have come up with so far is that this might not be possible due to default routes.
I have route maps setup on each connection, but also noticed that I have a default route statement. Do I need both?
Similar Messages
-
ASA 5505 - 2 Internet Connections, Problems with the Default Route
Hey there,
i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to Inside where he translates different services to the internal servers. He also has a site-2-site VPN terminating there and AnyConnect.
He now wants to switch the Internet Traffic from Inside to the new Internet Connection. Therefore changing the default route to that new ISPs Gateway. The problem now is, that no traffic recieved on the old "outside" Interface is transmitted back out of that old "outside" Interface. And this happens although the "same-security permit intra-interface" command is set.
Can you tell me what's wrong here? For every Static-PAT from outside to inside there is also a dynamic PAT from inside to outside. But the ASA seems to ignore this. I have not looked into the Logs yet, was too busy finding the problem because i had no real time window to test on the productive ASA.
Can it be achieved in any way? Having a default route on the ASA which leads any traffic to the second internet connection while still having connections on the first internet connection where no explicit route can be set? Because connections arrive from random IPs?
Many thanks for your help in advance!
SteffenPhillip, indeed , I have as well read may comments,it all depends on your environment as they all differ from one another, you best bet is to have a good solid plan for upgrade and fall back. You do have a justification to upgrade for features needed, so I would suggest the following:
1- Do a search again in forum for ASA code upgrades and look at comments from users that have gone through this process and note their impact in fuctionality if any. I believe this is good resource to collect information .
2- Very important , look into release notes for a particular version. For example version 8.0, look into open CAVEATS usually at the end of the link page, reading the open bugs gives you clues what has not yet been resolved for that particular code and if in fact could impact you in your environment, it is possible that a particular bug does not realy apply to your environment becuase you have yet not implemented that particualr configuration. Usually we all try to aim towards a GD (General Deployment) code which is what we all understand is most stable but not necesarily means you have to be stack in that code waiting for another GD release, in my personal experience I have upgraded our firewall from 7.2 to 8.0(3) long ago and had no issues, and recently upgraded to 8.0(4)when it was first release in August this year.
Release notes
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
3- AS a good practice precaution -
a-Backup firewall configs in clear text as well as via tftp code.
b-Backup running code and ASDM version code currently running in firewall.
c- Save the output of " show version " to have as reference for all the feature licenses you currently have running as asll as activation keys - good info to have to compare with after upgrade.
d- Ensure that the code you will be using to upgrade also uses correct ASDM version code.
I think with thorough assesment and preparation you can indeed minimize impact.
Rgds
Jorge -
We have an ASA5510 and we're currently using 1 internet connection to handle our site-to-site VPN connection and our internet traffic. We have a second internet connection on hand. What we would like to do it use BOTH internet connections: (1) will be dedicated to our VPN connection, (1) will be handling all our internet traffic. How can we get this setup? We're running Software Version 8.4(1)
See below, this discussion will provider guidance as to how to setup your topology.
https://supportforums.cisco.com/message/3359963#3359963
Don't forget to rate all posts that are helpful. -
My first ever purchase and download of a movie was successful but the second didn't download and came up with
"error 50 has occured". I tried downloading numerous times again after checking my internet connection and rebooting my
laptop. Still no luck and the Itunes store have charged me. Any suggestions please?This error can be quite common:
iTunes Store: "Error (-50)" when downloading purchased content
http://support.apple.com/kb/TS1583 -
I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes." -
I just bought the new MacBook Air a few days ago and my Internet connection is so slow. My iPhone's connection works fine when connected to the wifi but the MacBook connects for a few seconds then drops completely. What do I do? I tried connecting it to my phone's hotspot and it works perfectly. I'm a new Mac user so I have no idea what to do. I have Comcast xfinity cable and Internet. Thanks for the help.
Your warranty includes 90 days of phone support. Contact Apple.
-
I can't update my Ipod. When I check for updates it says "can't connect to server" despite internet connection being fine. When I receive a software update message;I say install and it starts updating then stops after 2 seconds. Help! (It is a 3rd gen IPod touch(I think)). Presumably as a result of this, I have tried to put my library onto my gf's new iPod touch and it just charges it..doesn't download my library onto the touch).
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
HH5 loses internet connection for a few seconds
I am struggling with the same issue for quite some time now.
We have HH5 Type A and BT Infinity 2 unlimited
All of a sudden it happens several times a day that we lose the internet connection. At the same time, the HH5 manager doesn't respond either.
I can not find anything in the HH5 event log that could tell me what causes it. First it started with the HH5 restarting on its own several nights in a row. Then I found out at least one of them was when they updated the firmware.
Last night according to the event log the hub restarted again for no apparent reason.
So this morning I was playing on my tablet and suddenly bang the connection was lost, I checked Hub manager via my PC and all I got was again can't connect. Tried to google and no internet on my PC either.
There is nothing in wired Lan or Wifi event viewer, I don't get an orange broadband light on the HH5. Everything looks like nothing has ever been wrong.
I have done a factory reset and that didn't help at all.
I keep getting this though
Time and date Message
00:30:11, 12 Mar.(129353.160000) The system is going DOWN for reboot.
00:30:11, 12 Mar.(129353.160000) OpenRG is going for reboot by IPC command
00:30:06, 12 Mar.(129348.160000) OpenRG will go down for reboot in 5 seconds
12:33:49, 10 Mar.(1185988.950000) The system is going DOWN for reboot.
And I am sick and tired of it.
Solved!
Go to Solution.Hi empress48,
I'm sorry to see you're having connection problems. Can you try these dropping connection checks and let me know if you need any further help.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
when i try to turn on my ipod, it tells me to connect to itunes and restore but a message pops up and says that i dont have an internet connection. the connection is on and it loads at 100mb per second.
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem -
I can't download OS5 or, rather, iTunes does download it about 450 mb and then, a few seconds after it starts processing the file, I get the message that I am timed out and am recommended to check my internet connection. I am using 3g to download it.
I don't know which country you're in, but in the US, carriers limit the amount of download for a single file when using 3G. Have you tried wifi?
-
Only 10 seconds of Internet connectivity on Intel based iMac
My iMac of 2007 is having trouble connecting to the Internet.
The setup is pretty straight forward. The iMac is connected through ethernet to a motorola cable modem. The provider is Ziggo. I live in The Netherlands.
Two PC's, a desktop and a laptop work fine and keep working when plugging in the ethernet cable.
Plug the ethernet cable in the iMac and everything works fine too -- Only for 10 seconds! Then internet connectivity is lost, while the ethernet status remains "connected" and even the IP address is still there.
A "Renew DCHP Lease" gives me another 10 seconds of Internet connectivity, after that same problem.
I changed cables, just to be sure. Even though the PC's are working fine with the original cable.
I've reset the modem a 100 times already.
Any suggestion would be greatly appreciated!Solution was simple, just leave all PC's turned off for a day. The modem "forgets" the MAC addresses and all works fine.
-
Internet connection off and on, off and on, every few seconds
This problem started on my new MacBook Pro - Internet connection was cycling off/on, off/on, every few seconds. Sometimes restarting the machine brought back a steady connection. Then I was using Teamviewer to transfer files from Mac Mini to MacBook Pro and had good connection for hours. Then suddenly - off/on off/on every few seconds, exactly like the MacBook Pro.
Tried all the usual things but here's the clue that the problem is likely in Mavericks 10.9.2 or peculiar to the Mac in some other way: I have a PC on the same network and right now, as we speak, connection is steady, so it seems clear the problem isn't my modem (though I did try resetting it) or ISP, while the two Macs both are cycling WiFi off/on off/on every few seconds, .
Anyone got a clue?Clinton, from various posts in forums about the Motorola SBG6580, an integrated router/modem, and seeing several posts about exactly the problem I am experiencing, it appears pretty likely that a firmware update is needed. Goiing into my modem admin panel, I do see that the firmware version is a much earlier number than the version recommended by various users. It also appears I am not able to do this myself and must call my ISP, which I can't do until tomorrow.
Sounds like I know what I'm doing, doesn't it? Ha.
If it turns out this doesn't solve things, I'll come back and try to answer your questions. -
Instaling second ethernet card / sharing internet connection
Hiya.
Is it possible to share my cable broadband service ( PS3 etc ) through my PPC G4, maybe by installing a second ethernet pci card and sharing the internal ethernet, or is there any other possibilities. no airport, but do have a D-link bluetooth dongle...As other posters have pointed out, you don't need a second ethernet card to share out your connection - if you have an existing router (with a number of ethernet connections), you can connect your game consoles to that, and your ISP will be none the wiser. Your ISP will still give you one IP address; your router does the translation into multiple private IP addresses (eg 10.0.1.1, 10.0.1.2, etc)
Another option is to buy an inexpensive network switch, put that between the router and the Mac, connect the other devices to the switch, and turn on sharing from ethernet to ethernet. But you really don't need to with a router on the network.
If you share out your Mac's internet connection, the devices behind the connection will get IP addresses in the range 192.168.2.x (the Mac will effectively be their router/DHCP server at 192.168.2.1).
Matt -
Problem: 50 second plus startup, shutdown, slow internet connections regardless of networks. have not added new apps recently. Tried removing startup items, holding down the left shift, option and control and the power button for 10 seconds, running disk utility, reducing number of files, nothing helped.
Am running 10.9.5 on a Macbook Pro, mid 2010. (see all specifics below)
EtreCheck version: 2.1.8 (121)
Report generated February 4, 2015 at 1:40:11 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 244
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 1:21:21
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (248.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Logitech USB Receiver
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.canon.MFManager.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
AirPort Base Station Agent Application (/System/Library/CoreServices/AirPort Base Station Agent.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
Default Browser: Version: 537 - SDK 10.9
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.7
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 [Click for support]
GarminGpsControl: Version: 4.0.3.0 Release - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Move-Media-Player: Version: npmnqmp 071101000050 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
WacomTablet [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 70.50 GB
Destinations:
External HD [Local]
Total size: 999.83 GB
Total number of backups: 3
Oldest backup: 2014-06-10 23:05:50 +0000
Last backup: 2015-01-05 17:41:37 +0000
Size of backup disk: Excellent
Backup size 999.83 GB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% systemstatsd
0% fontd
0% AppleSpell
0% configd
Top Processes by Memory: ℹ️
344 MB com.apple.WebKit.WebContent
172 MB com.apple.IconServicesAgent
146 MB softwareupdated
103 MB mds_stores
77 MB systemstats
Virtual Memory Information: ℹ️
4.78 GB Free RAM
2.16 GB Active RAM
616 MB Inactive RAM
1.04 GB Wired RAM
434 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 4, 2015, 12:17:24 PM Self test - passedHello m4294SA,
Welcome to the Apple Support Communities!
I understand that your computer running Mavericks is running slower than expected. I also realize that you have completed a lot of good troubleshooting already. I would further suggest reading over and completing the steps in the attached article that you have not yet completed.
OS X Mavericks: If your Mac runs slowly
Have a great day,
Joe -
Time Capsule drops Internet connection for 2-5 seconds
Is anyone having an issue with losing internet connection for about 2-5 seconds randomly? Started after I got the Time Capsule. First noticed it when my phone calls would drop for a second(Vonage). Did not think much of it until I noticed it dropping while playing online games?
Any Ideas? I hear it could be the latest firmware upgrade but can’t remember if this happened before.If your Windows boxes are on the same WiFi network, that could be. I use to work with PC's and Macs combined. Not to bash Windows , but a number of problems we had were always Windows related.
You might try and just unhook your Windows boxes and see if it goes away! LOL
Maybe you are looking for
-
Best way to store and back up data on Mac (retina)?
Ok so I bought the 13 inch retina macbook pro (This is my very first mac btw, so I am still trying to get used to basic functions though it's getting there..) and I've researched it a bit but I have some issues on figuring out how I best should store
-
photoshop elements 10 wont open, comes up with error 16, cant reinstall as i have no disc, it came preinstalled with the laptop. any ideas?
-
Transfer saved emails from disc to Thunderbird
The hard disk in my PC was malfunctioning and I just managed to transfer all my past e-mails that I had saved (in several folders) onto a CD. There they appear as Thunderbird Documents (a lot of them). I can open each one and I can save each one into
-
Where to learn about Struts?
Hi, I wanna learn Java on the server-side, and the first thing I'd like to learn is Struts, cause I constanly hear about it, so I've searched for a tutorial about it but couldn't find, could someone please advise me some tutorial or a good place to s
-
Adding external data from another forest?
Hello Community The following 2 scenarios are how data is entered and stored in a non-Sharepoint environment: Scenario a) C# ASP.Net or C# Windows applications are used to enter data that gets stored into SQL Server databases on a network.