SSH works internally over wifi, but not over router

I feel really embarassed I cannot figure this one out, and I have configured ssh years ago. I am able to ssh via my Android device over wifi. Details below. Thank you in Advance! Connect Bot follows a different "format" for connection obviously, compared to a Linux workstation.
router information
Router Name
DD-WRT_mike
Router Model
WZR-600DHP
Firmware Version
DD-WRT v24SP2-MULTI (11/04/12) std - build 20180
sshd config file
http://pastebin.com/bNnCmjay
NAT/QOS
Applicatoin: ssh ArchBoxMTD
Protocol(s): Both
Port in: 22
Port out: 22
Destination: 192.168.11.30 [my pc]
Device Information:
Android 4.2.1
Client: ConnectBot
Connection 1:
Network: Home Wifi
Connection String: "[email protected]:22"
Status: [sucessful]
Connection 2:
Network: Verizon 4G
Connection String: "mikeyd@<router_ip>:22"
Status: [failed]
I know there has to be something on my router, or verizon has an issue with this. As it was several years ago, I am hoping someone here can help me out. I searched for "ssh" "ssh verizon" and other things, but couldn't find a concrete answer, so if there is one in another post, I do apologize in advance.
Mike
Last edited by degmic71 (2013-08-22 02:39:55)

rman wrote:
Right now I'm suspecting the DD-WRT router. Does your deluge port forward work correctly?
Also, do you have iptables on your Arch box? If so, show us
iptables -nL
There you are sir: http://pastebin.com/7AW1gdN0
On Deluge I go through BTGuard, so naturally I get "no incoming connections" But my speed is fine 9.6 Mb/s on average. (I pay for 10/1 service). I can show you any configs from that if you wish. Don't mind the ip table entry there, that was from me adding port 6969 originally, after reading the troubleshooting area of the Arch SSH wiki. I really appreciate the help guys, I really do.

Similar Messages

Home sharing works on primary wifi but not via Access Point

I have two wifi routers set up at either ends of the house. The primary router (Netgear DGN2000) is connected to an Access Point (Edimax EW-7416APN) via a D-link Powerline ethernet connection. Both are configured with identical SSID names/passwords meaning I get seamless switching between the units when walking from one end of the house to the other. Internet connectivity works fine when connected to either unit on laptop, phone and ipad.
The only issue I am having is with itunes Home Sharing. My main PC is connected to the primary router via a further D-link Powerline ethernet connection. When I am within the wifi signal of the primary router, the Home Sharing library from the Main PC shows on my ipad2 and I can access all music no problem. However, if I walk to the other end of the house whilst playing a track then as soon as the wifi connection switches to the AP then the track will stop. When I search for libraries then the Home Sharing library doesn't show.
The Access Point is set to be in AP mode. The latest version of itunes is installed. The PC is running Windows XP
Any pointers anyone can give with this issue would be very welcomed as our main entertaining room is in the range of the AP wifi.

Do the old "forget this network" while on your home wifi, then reconnect to it. If that doesn't fix it, it's prob a router/internet issue at your home. Would need some more info to help futher troubleshoot.

I m using iPhone 6 64gb. one of the app works fine on wifi but not on 3g

Snapchat doesn't work on 3g only on wifi. installed d latest update.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

IPhone 5 wifi works in one room but not the other.

I have an iPhone 5 and the wifi is unreliable. It works in the room with the router but when I walk down the hall it doesn't work. I'm talking 20 feet away. So frustrating because the phone is almost worthless. Why would it connect but only in such close range? No other devices have this problem. Yes, I've turned the wifi on and off. Yes, I've restarted the router. Yes, I've checked the WEP. It just makes no sense that it would work in one room but not the next room. Help!

Hello Gnpco,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/HT1365
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Best of luck,
Mario

I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address.

I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address being used by another device. Second wifi network was also created. The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??

If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
Wait a full minute
Start the modem, and let it run by itself for 2-3 minutes
Start the next device connected to the modem and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network

New GE70, killer e2200 working with WIFI but not by cable

Hi!
I bought a GE70 today and noticed that I can connect to the internet through WiFi but not with a network cable.
I've tried to upgrade drivers and such, but it still doesn't work. I've no router in this apartment so I'm using WiFi through my old laptop so I can figure this thing out.
What I've done so far:
1. Installed the drivers on the CD which I got with the computer. Although when on BigFoot LAN Driver, it says that I've already another version installed and need to uninstall it).
2. Downloaded the drivers for the network card through MSI homepage and installed. Funny thing, after that not even the WiFi worked.
3. Tried to unplug the power for the modem and wait a while and then plug it back in but that didn't work either.
4. Figured it might've been something wrong with windows so I did a factory recovery but that didn't seem to help either.
All I get when I plug the cable in, I get the "Limited access" (yellow mark) on the LAN icon down in the right side corner.
Has anyone else gotten this problem?
Kind regards,
W

Quote from: Wingu on 20-May-13, 08:15:26
Thank you for your reply.
I think I've got it sorted now. I tried another network cable and it works now.
It's weird however since the cable I've used for about a month now works with my old computer (Win7) but not with my new computer.
Gonna go to an electronic store later and see if it will make any difference if I buy a new cable.
Does the killer e2200 only accept certain sort of network cables?
Thanks again.
W
It really should work with any network cable to be honest, as long as it's not a PATCH cable. Patch cables are wired slightly differently, but they are rare anymore.

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

My "places" in photos is working on my phone but not transferred to my iPad in Photo Stream even though the photos transfer. It used to work, so did I do something?

OK Vicky, good clues...
See if this helps...
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
Resetting your keychain in Mac OS X...
If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
http://support.apple.com/kb/TS1544

Audio works in audio chat, but not in video chats.

So, when I start an audio chat with a friend, we can hear each other just fine. I then switch over to a video chat, and she can hear me, but I can't hear her. I already had to do all sorts of port forwarding in the firewall settings and router in order to rid myself of error -8... this is kind of frustrating!
I fixed the problem a week or so back by simply restarting iChat. When I tried that this time, no dice. Any ideas? Seems odd that it would work in audio chat but not in video chat...

I am having the same issue. Last night my sister and I did a video chat (which took some doing- we are both neophytes which it comes to this technology). It was great! But we had no audio. So we typed our conversation for quite awhile till my sister turned on her speakers...... Then she could hear me!! Now we were excited. But I never could hear them. On the video window there were 3 icons at the bottom, one being a microphone icon which had a line through it. So we are assuming the audio problem is on her end (she's using a Dell) and not at my end (since she could hear me)- is that correct? I checked all my settings and I had my speakers on the whole time with the volume maxed out. I could hear clicks when she wiggled something on her speakers but that was it. Any clue what she needs to check? I know I am posting in a Mac forum but we are giving it try again tomorrow and it would be nice to hear her. I know that there are plenty of us Mac users that have relatives that use PC's so maybe someone might have an answer. Will keep searching though. Judy

It works on my Computer, but not in my DVD Player

I burned a DVD, It works on my Computer, but not in my DVD Player...why?

still am trying to figure out how to burn at a slower speed, I see no optiond on iDVD.
You need to create a disk image out of iDVD, then burn. See below.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?path=iDVD/6.0/en/18.html
http://www.kenstone.net/fcphomepage/image_to_diskstone.html
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Scrolling Header works in Visual Studio but not on Report Server 2008

2008 R2 Reporting Services. My scrolling header works in Visual Studio but not when deployed to the Report Server and viewed in IE 9. I have read most every post on this issue and can't find a solution. I have the fixed data properties
set correctly. Any suggestions?
Help appreciated!
Linda

Hi Linda,
As a suggestion, I would try to delete the deployed version and instead of deploying ther RDL file, i would try to upload the file and test it.
If the issue exisit, then I would download the exisiting version from the reportserver and compare the xml versions of the two reports and check if the propoerty is getting over written while deploying.
HTH,
Ram
Please vote as helpful or mark as answer, if it helps

When i try to connect my iPhone 4S into iTunes through wifi or USB it will not connect the other thing is when i hook up my iPad into iTunes it will connect through wifi but not USB? Now is this a issue with my iPad and iPhone or is this iTunes?

When i bought my iPhone and my iPad they both were on iOS 7.0.2 i updated them shortly after thinking the new iOS 7.0.4 was better. i see its not but they both worked great with iTunes before and after the update. My question is why is my iPhone not connecting to iTunes? it will not connect through USB or wifi and i know that the setting to do that is turned on. my iPad connects through iTunes through wifi but not USB. This isnt making any sense but i wanna know is this a iTunes issue? or is it my phone and iPad??

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

My computer will connect to wifi but not the Internet

My computer will connect to wifi but not the Internet. It's not a problem with my router because I've tried other devices on the same router and they work. I have also tried my computer on other routers and there is still no Internet connection. Does anyone know how to fix this?

Hello Bmowat,
Thank you for using Apple Support Communities!
It sounds like you are able to successfully connect to your Wifi network, but cannot get internet access.
I found this article for you named Wi-Fi: How to troubleshoot Wi-Fi connectivity found here http://support.apple.com/kb/HT4628?viewlocale=en_US
This section in particular since you have Mountain Lion installed:
OS X Mountain Lion v10.8.4 or later
Use the Wireless Diagnostics application included with OS X Mountain Lion v10.8.4 and later to identify and resolve Wi-Fi issues. For further information, please see About Wireless Diagnostics.
It is a built in troubleshooting tool to help diagnose and repair network issues and should help you resolve this issue.
All the very best,
Sterling

I can connect to WiFi but not the internet

I am trying to connect a new IPad 2. I have a Belkin router that is B+G+N. I use WPA2 encryption and MAC filtering. The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email. When I type any URL in Safari it takes me to my router's management page. In fact I can log into my router and manage it from my IPad but I can't connect to anything else. I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's. This has me baffled.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Isight works with photo booth but not in ichat or google talk or skype?

isight works with photo booth but not in ichat or google talk or skype?

Hi
Is this an Internal or External iSight ?
In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
If it reads Audio open the Connection Doctor from that same menu.
In the connection Doctor open the Capabilities tab
Does it say your Internet Connection is too slow ?
At this point I would need to know which iChat Version.
However also look in the View Menu.
Is Show VIdeo Status ticked ? (this shows green Icons next to your Buddy Pic and those of your Buddies
Next go to the iChat Menu > Preferences > Video Section
Do you see a preview here ?
Re: GoogleTalk
Have you enabled TALK on your Google Account Settings ?
You need to have a Google Mail ID (Not any other sort of Google ID)
Have you downloaded the Intel only Web Browser Plug-in to do Video in a Web Browser.
10:48 PM Tuesday; August 30, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Apps work in one location but not another

Some apps (iheartradio and tvguide) work fine from my home wifi, but not in another wifi area (at work, which has better wifi). Other apps such as pandora work fine at both locations. What is the difference and how can I get all apps to work everywhere?

It's entirely possible that your employer has blocked certain ports on the corporate firewall, which will prevent some apps from working.

SSH works internally over wifi, but not over router

Similar Messages

Maybe you are looking for