SSI do not appear in design view; CS4
All of a sudden.. my ssi's do not appear in design view in CS4. This is occuring in multiple web sites that prevously DID display SSI's
Yes.. I do have Preverances --> Invisible Elements --> Server Sides Includes: Show contents of include file IS checked
Yes.. I have checked both the local and remote information in Site definitions .. all are correct. (and none have changed since the problem emerged) All sites are set to site root relative.
Yes.. I have checked each include. None has any doc type, html or body tags.
No.. LIve View is not turned on
Yes.. the pages all validate
Yes.. I have tried to 'start from scratch' .. new site, new site definitions.. new .shtml pages and new includes. No love!
After inserting a new SSI using the insert menu (typical code result: <!--#include virtual="/redesign/includes/quickClicks.htm" -->) the properties bar seems to get stuck .. displaying the ssi code and not allowing me to select other elements on the page to edit properties. A restart of Dreamweaver solves the problem. But boy is this annoying.
All of the includes do display properly when uploaded to the web server and viewed in a browser.
I've searched the forum.. and read any post that seemed even remotely relavant and have not been able to solve the problem.
I would really appreciate your help. I am a web designer and have used Dreamweaver for many, many years.
Karen
Nice site. I drive by that school quite often when I shop in Thousand Oaks.
Crashes, installation, JavaScript errors, and unexplained problems
If Dreamweaver is acting erratically, or if you see a message saying "the following JavaScript error(s) occurred", it's usually a sign of a corrupt cache file. The first thing to try should always be to delete the file cache. If that doesn't work, delete your personal Configuration folder. Full instructions are in Deleting a corrupted cache file.
http://forums.adobe.com/thread/429114
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com
Similar Messages
-
Heading elements do not appear in design view
Hello,
heading (h1, h2 ...) elements do not appear in design view. anybody know how to fix this?
btw seems like DW gets worse with each successive version.I really don't have any troubleshooting advice because I can't reproduce the problem and have not seen this problem being raised previously in the forums.
If you have deleted the personal config file and cache and that hasn't helped, it may be time to uninstall and reinstall.
Also double check your computer for any viruses or malware etc.,
Depending on what version you are using then, you may want to run the uninstall scripts to make sure you remove *all* files associated with the software and start from scratch.
If you are having problems with Creative Suite 3, I would suggest using the CS3Clean script: http://www.adobe.com/support/contact/cs3clean.html
There is a different version for Creative Suite 4: http://www.adobe.com/support/contact/cs4clean.html.
WARNING: The CS3Clean and CS4Clean scripts remove from your computer EVERYTHING related with the CS3 and CS4 suites, apart from any documents that you have created using Adobe programs. Make sure you have your installation disks and serial numbers available for reinstallation.
If all else fails, then you may need to contact Adobe Technical Support. -
Img Does not appear in Design View
Dreamweaver 8
Have an image that I would presume has a simple enough presence in the page...
<table width="985" border="1" cellspacing="0" cellpadding="0" height="100">
<tr>
<img src="Includes/Images/ButtonsNBanners/bnrPrimaryTop.png" alt="test" width="1074" height="94" border="0" usemap="#Map1">
</tr>
</table>
...and sure enough the image appears as expected at runtime.
But within Dreamweaver Design View it does not appear at all.
Why?
I have multiple other images on this page that all appear within the designer as expected, but not this one.
My main problem right now is that I need a map associated with this image and would really like to use DW's tools to create and position the <area> tags.
Has anyone seen this sort of behavior in DW8 before?
All input welcome and appreciated!!!That was it KathH --- THANKS!!!
Had created the row w/out <td> cells to carry the top banner (sort of cheating) on spanning the cells i guess ( )
Anyway, re-wrote so that the banner table was independant and did not require span and picked up the data table independantly.
Problem solved and designer picked up the image precisely.
Thanks again!!!
Curious though that the image is dependant on the <td> tag. I would have expected any image called within the page to display in the designer regardless of location in the html.
Oh well, fixed and onto the next challenge.
Once more THANKS!!! -
Table lines not appearing in design view
im using dreamweaver 4 and usualy you can see all the tables
youve created in design view but i dont know if iv changed a
setting by accident but now the main outside table is showing but
every other one is invisible. all the content within the tables is
appearing but not the tables. i split the cell of a table and have
to roll the mouse around to try find where the divide is so i can
drag it cos i cant see anything.pellio wrote:
> im using dreamweaver 4 and usualy you can see all the
tables youve created in
> design view but i dont know if iv changed a setting by
accident but now the
> main outside table is showing but every other one is
invisible. all the content
> within the tables is appearing but not the tables. i
split the cell of a table
> and have to roll the mouse around to try find where the
divide is so i can drag
> it cos i cant see anything.
>
under main menu:
view > visual aids > ...
seb ( [email protected])
http://webtrans1.com | high-end web
design
Downloads: Slide Show, Directory Browser, Mailing List -
Changes not appearing in Design View
I am just starting out in DW5.5 and I have been using a good tutorial but I have run into some buggy behavior. For example I have inserted a CSS style rule but the changes I am making (e.g., box height, color) -- though they appear in the coding view and in the Properties panel -- are not showing up in Design View. I have tried saving, quitting and then restarting but that didn't work. The "refresh" button is grayed out.
Any ideas?
thanks.Some things to check:
You are working in a Defined Site, right? Sites > Manage Sites > New Site >...
Have you saved your CSS and HTML files?
Are you working with Valid Code?
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Code in will not appear in design view window of CS3 :(
When I was using CS2 and placed code in an HTML page like
this: <$JobTitle$> it would show up in the Design
window...but in CS3 it's invisible to the design view/window. Is
there any way to get it to show again? It would be a HUGE
help!!!Yes, I do have it checked. It makes no difference with these
tags, unfortunately. :(
And I will admit, they'll be a dozen or so very happy people
if you can help me figure this one out.
I tried to compare all the settings under preferences between
CS2 and CS3, and they look the same. That's definitely why I'm
asking teh question here. -
Text not appearing in Design view
There is a twist here...
One one mac with CS5 Dreamweaver the text shows up in the design window just file
On ANOTHER mac with CS5 Dreamwearer certain text doesn't show up. The text is black so that isn't an issue. Why would there be a difference between MACS? I am also attaching the Preference file image.
Specifically the following AND another couple of places where BOLD FACE text is located:
Items For Sale
(updated June 16, 2010)
LISTING of the
BIG LITTLE BOOK CLUB'S
BLB ITEMS FOR SALE
Sample of the code:
<table width="610" border="0" cellspacing="2" cellpadding="3">
<tr>
<td align="center" valign="top" bgcolor="#e6e6fa" width="600"><img src="graphic-sounds/bkshelf600.gif" alt="" height="155" width="500" border="0"></td>
</tr>
<tr height="1316">
<td align="center" valign="top" bgcolor="#e6e6fa" width="608" height="1316">
<div align="center">
<b><font size="5">Items For Sale <br>
(updated June 16, 2010)</font></b></div>
<div align="left">
<p align="center"><a name="one"></a><b><font size="+3">LISTING of the <br>
BIG LITTLE BOOK CLUB'S<br>
BLB ITEMS FOR SALE</font></b></p>
<p>The For Sale listings are updated several times a year. <br>
</p>
<p>The listings are for books being sold by the Big Little Book Club. To purchase a book or books or to ask questions about the listings, contact the President of the Club at: [email protected].</p>
<p>Please be guided by the following information.<br>
</p>
<p><b>SYMBOLS USED IN GRADING THE BOOKS LISTED HERE</b></p>
<p>P = POOR</p>
<p>G = GOOD</p>
<p>VG = VERY GOOD</p>
<p>F = FINE</p>
<p>VF = VERY FINE</p>
<p>NM = NEAR MINT</p>
<p>M = MINT</p>
<p>HTG = HARD TO GET<br>
<br>Ok, the problem got solved. I shut down DW and reopened, and
everything was there. Often it is that I cannot edit with key
commands, for example to delete, half the time I must use the
contextual window, instead of the delete key. When I close DW and
re-open then sometimes the delete key function is re-gained....
Funny.
Thanks again,
Hope -
SSI includes do not display in design view.
Hi,
I am working on an existing site. By "existing", I mean there
was no Dreamweaver site definition. I created the site definition
but, when I open pages that use ssi, the included files do not show
in design view. If I reinsert the include, it show in design view.
The code is the same in code view. Is there some way to update the
includes so I don't have to reinsert them?
Thank you,
HenryBy "header/footer" tags, Ken means "<html>,
<head>, or <body>" tags - you
have none of those in your files being included, do you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Henry Anthony" <[email protected]> wrote in
message
news:f2skgv$aej$[email protected]..
> Ken,
>
> I inherited the site. To work on it in Dreamweaver, I
had to create the
> site
> definition. So, the site was defined after it was built.
The include files
> are
> fine. No header/footer tags. I assumed the includes
would show when I
> opened a
> file but they will only show if I reinsert the include
while in design
> view.
> Upon examination of the code after the reinsert, there
is no change.
>
> Thanks,
> Henry
> -
.gif Picture not appearing in design panel
I have a .gif picture not appearing in design panel but it
appears in the browser preview.
<div id="footerPanvalid">
<image src="images/valid-xhtml10-blue.gif" alt="Valid
XHTML 1.0 Strict" height="31" width="88" />
</div>
#footerPanvalid {
position: relative;
right: 200px;
padding-left: 300px;
z-index: 23;
valid-xhtml10-blue.gif also appears in the assets panel
Any ideas whats going on?Put a border around #footerPanvalid to make sure that you can
see it in
Design view.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"nikos_golf" <[email protected]> wrote in
message
news:fclmk4$39d$[email protected]..
>I have a .gif picture not appearing in design panel but
it appears in the
> browser preview.
>
> <div id="footerPanvalid">
> <image src="images/valid-xhtml10-blue.gif" alt="Valid
XHTML 1.0
> Strict" height="31" width="88" />
> </div>
>
> #footerPanvalid {
> position: relative;
> right: 200px;
> padding-left: 300px;
> z-index: 23;
> }
>
> valid-xhtml10-blue.gif also appears in the assets panel
>
> Any ideas whats going on?
> -
Lists not showing in Design view
If I preview page in browser, I can see the bulleted list,
but it is not visibile in design view, pretty annoying. Anyone know
why this might be happening? I validated my code and got no
errors...Open any html page
either type the element in code view, say h1. Hello
it doesn't show up in Design View (It's visible in Live view however)
Or,
In Design View type Hello (yes, it's visible!)
Highlight Hello, then right click (I use a 2 button mouse) select from the pop-up menu and format the hello as h1. Hello
It disappears from the design view... (yes, it's visible in Live View)
Menu spry's and other "widgets" inserted do not display correctly in Design View, but display Okay in Live view
(This behaviour did not happen in CS4)
Mo Eb , Garry
*** http://uofgts.com
** [email protected]
o "Beer is living proof that God loves us and wants us to be happy."
-Benjamin Franklin, American statesman and diplomat, (1706-1790 ). -
After reopening dreamweaver files, the table and its contents are not shown in design view
I got a problem with deisgn view which has stucked me for the whole week. I've designed a webpage with dreamweaver CS4. After reopening this webpage, I got problem to see the tables and images inserted in dreamweaver (the sliced images from fireworks works well). Somehow this problem only existed in design view, but NOT is browswer view/ live view. I thought it is the setting problem, but I tried to reopen the webpage I designed earlier... got no problem in either design or live view. I also tried starting over another new file, same problem existed (tables/images do not show in design view) I am really confused. Any thoughts?
I've already done my research everywhere, but cannot find solution.Thank you so much... it works...
I should come here earlier... wasted lots of time !! -
VB code not showing in Design View
I am working with a form that has VB code for validation and need to style it with CSS. The problem is the form is not visible in Design View. The code is there, the page renders and works fine in a browser but has anyone seen this issue before? I have a similar form that uses C# and it shows up fine in Design view.
the page is here: http://www.housing.ucsb.edu/digiknow/digiknow_form.aspxDisplay problems are most often caused by malformed code or an imbalance in opening and closing <div> tags. Try validating your code and fix reported errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
XSLT Mapper file does not open in design view
XSLT mapper file in the composites exported from weblogic EM as a jar and imported in JDeveloper 11.1.14 does not open in design view. There is no option of design view itself in the tab structure. It is viewable only in source view.
Please suggest, how do I view the desgn view of the xslt mapper?
Thanks,
PromiitWhen you export composites from Weblogic EM in jar format, the resulting files are differently formatted from what was used for deployment.
So, basically, the XSLT file, you are trying to open in Jdeveloper has lost the "mapSources" and "mapTargets" sections, which are generally present in the header section of the jdeveloper-generated XSLT file. Try to manually hand-crack those sections and you should be good to go.
Hope it helps ! -
Stationary credated in Mail does not appear properly when viewed in Outlook, is there around this? Or, can I export (as a PDF) the email drafted in Mail with stationary that does not have the meail info on top of the page . Thanks so much for your help.
No real solution to problem 1, stationary tends to look different depending on the client, as for 2 Mail does not export to pdf but can print to pdf, however you still get the mail headers.
-
Album Art Not Appearing in Album View
I have just upgraded to iTunes 10. I have all of my music attached to album artwork. The artwork shows up in Cover Flow, but does not appear in Alum View. I don't know if that is because in some cases I only have one song from an album instead of all of it, or not. I do not know how iTunes is determining valid artwork.
Any help you be appreciated.The "why" seems to be that that somebody thought that in the old layout albums with only one or two tracks were consuming too much screen area because of the way that artwork followed by album, artist and rating could create large unused areas where details would go. I can't say I've noticed anyone actually complain on these boards about it as a problem but there you are. Personally I find the solution worse, particularly at home where I have a small screen, as the new layout uses much more space horizontally. I also miss the vertical grid lines and user selectable artwork size. All in all an uneccesary attempt to fix something that wasn't broken.
tt2
Maybe you are looking for
-
Can i set up a third computer that isn't wireless
I currently have 2 wireless laptops set upon my HP Photpsmart eAll in one C360 printer. Can I connect via usb a non wireless desktop computer to the C360, and not mess up the wireless connection for the other 2 computers? Thanks, George Blandford Thi
-
Hi everyone, I'm trying to use the batch create multiple files command in Acrobat 10.1.3 to create a pdf from multiple word files but when I try to add the files, all Word files are greyed out. Is it possible to batch create from Word files or is tha
-
OS open file dialog vs my dialog
hi, I have problem redirecting main page from dialog. On main page, there is a report link. If this link pressing, an dialog is shown up and user selecting some values to see at pdf report. After selecting value, pressing "get report" button at the d
-
"Apps"-Tab won't load in Creative Cloud Client - please help
I just made the subscription for the Creative Cloud and installed the client - but it's not working. When I click on "Apps" to install the Adobe Apps (obviously) it just loads and loads without stopping. As a result, I'm not able to install the apps
-
ASP app is throwing error when trying to load any of the Crystal Reports
The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception. A couple notes:yes, I did search for this problem, I've read (and have been confused by) the documentation both on MSDN and this site. I've never use