SSIS 2012 OData - Cannot acquire a managed connection

I have an SSIS project in SQL Server 2012 deployed via  VS 2012 SSDT-BI.
If I run this from my local SQL Server it works correctly, however if I push it to another server and run it I always get a
Cannot acquire a managed connection from the run-time connection manager.
The connection looks like this..
Document Url=http://myodata;Include Atom Elements=Auto;Include Expanded Entities=False;Integrated Security=SSPI;Persist Security Info=False;Time Out=600;Schema Sample Size=25;Retry Count=5;Retry Sleep=100;Keep Alive=True;Max Received Message Size=4398046511104
Any ideas?
Paul

Can you try passing "User ID" and "Password" instead of "Integrated Security=SSPI"?
Example,
Base Url=http://dynamicsnav:7048/dynamicsnav70/OData/;Include Atom Elements=Auto;Include Data Services Content=True;Include Expanded Entities=False;Namespaces to Include=*;Integrated Security=Basic;User ID=navadmin;Password=**********;Time
Out=600;Persist Security Info=False;Schema Sample Size=25;Retry Count=5;Retry Sleep=100
Regards, RSingh

Similar Messages

  • Cannot acquire a managed connection

    Dear All,
    I am very new to the SSIS package development so please point out my stupidity If I have done any. I am trying to ETL data from excel spreadsheet to SQL server using Excel data connections and OLE DB and ADO.Net data connection. I am using CDC task to monitor
    any changes done in the source excel file. I am doing it in a way same package extract information from the spreadsheet and import in to Server 1 (CDC enabled) and compared it to the same table hosted on another server 2 which is a production server.
    When I run this package on DTS it runs fine and I am able to generate Deployment Manifest file. When I try to run the same Manifest file I am getting below error
    Error: Failed to Decrypt an encrypt XML node because the password was not specified or not correct. Package load will attempt to continue without the encrypted information.
    Error: Cannot acquire a managed Connection from the run-time connection Manager
    I have change the package encryption level from "EncryptSensitivewithUserkey" to "EncryptsensitivewithPassword" and have added password to the PackagePassword it the package property and saved this project.
    when i add this package to the SQL agent job I am still getting below error message
    Message
    Executed as user: administrator. Microsoft (R) SQL Server Execute Package Utility  Version 11.0.2100.60 for 32-bit  Copyright (C) Microsoft Corporation. All rights reserved.    Started:  11:44:49  Error: 2014-12-04 11:44:52.10
        Code: 0xC020801F     Source: CDC Control Task CDC Control Task     Description: Cannot acquire a managed connection from the run-time connection manager.  End Error  Error: 2014-12-04 11:44:52.10     Code:
    0xC0024107     Source: CDC Control Task      Description: There were errors during task validation.  End Error  DTExec: The package execution returned DTSER_FAILURE (1).  Started:  11:44:49  Finished: 11:44:52
     Elapsed:  2.215 seconds.  The package execution failed.  The step failed.
    Please help I am stuck on this issue from last 2 days now. If you need more info please let me know.
    regards
    JK

    Looks like you run the package in thee Agent for this purpose you should use the 'Rely on server storage for encryption' (ServerStorage) protection
    In the "EncryptsensitivewithPassword" scenario you need to provide the actual password by editing the command line in there:
    with adding switch /De <password> to it
    Arthur
    MyBlog
    Twitter

  • Xsql setup problem. 'Cannot acquire a database connection to process page.'

    This is probably a really basic problem, but I am getting the following error when I try to use the xsql demos.
    Oracle XDK Java 9.2.0.2.0 Production
    XSQL-007: Cannot acquire a database connection to process page.
    Io exception: Connection refused(DESCRIPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=4))))
    I really don't know what I am doing wrong, so any help would be appreciated.
    My jserv.properties file:
    wrapper.classpath=s:\xdk_java\lib\xsu12.jar
    wrapper.classpath=s:\xdk_java\lib\oraclexsql.jar
    wrapper.classpath=s:\orant\jdbc\lib\classes12.zip
    wrapper.classpath=s:\xdk_java\lib\xmlparserv2.jar
    wrapper.classpath=s:\orant\xdk\admin
    Thankyou
    Adrian

    hehehhe
    I had the connection wrong in the XSQLConfig.xml file.
    It's all working nicely now.
    Ade

  • SSIS 2012: What rights are needed to connect to SSDB via DMO

    I'm trying to connect to the SSDB catalog to execute a package using the .NET object model as per
    http://social.technet.microsoft.com/wiki/contents/articles/21978.execute-ssis-2012-package-with-parameters-via-net.aspx?CommentPosted=true#commentmessage
    The problem is if I do this with a normal user I get
       The server principal "XXXX"
    is not able to access the
    database \"SSISDB\" under the
    current security context.
    If I grant the user sysadmin rights it works, but the old Integration Services model of granting db_ssisadmin doesn't help
    Paul

    As far as I know db_ssisadmin is a msdb role so it wont work well with package access control for packages stored in IS Catalog. It will be relevant only in cases where package is stored in msdb.
    If you're using catalog (2012 deployment) you should be using ssis_Admin role which is what SSISDB provides you with for access control
    see
    http://blogs.msdn.com/b/mattm/archive/2012/03/20/ssis-catalog-access-control-tips.aspx
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • XSQL-007: Cannot acquire a database connection to process page.

    Just getting started with XSQL with Oracle 8.1.7. Ran the
    helloworld demo and got XSQL-007 error. How do I map
    connection="demo" to a database service or SID name?

    I ran into somthing similar earlier. Checked an article off
    ORAMAG, january 01 called 'Generating XSQL Server Pages'.
    (http://www.oracle.com/oramag/oracle/01-jan/o11xml.html)
    I found that if I verified the settings in the jserv.properties
    file under Apache, and also verified the connetion info in the
    XSQLConfig.xml file (Do a search) that you can eliminate the
    issue. (I was using JDeveloper 3.2.3, and have some trouble with
    JDev 9i, but I assume you can get some good info none-the-less
    from this article).
    Best of luck.
    Scott Rappoport, OCP
    AT&T Enhanced Network Services

  • Unable to get demo's working, "XSQL-007: Cannot acquire...."

    I must be missing something simple but when I try to run the demo's I get the following error...
    XSQL-007: Cannot acquire a database connection to process page.
    Io exception: The Network Adapter could not establish the connection
    My XSQLConfig file has the following connection information:
    <connection name="demo">
    <username>scott</username>
    <password>tiger</password>
    <dburl>jdbc:oracle:thin:@localhost:1521:ORCL</dburl>
    <driver>oracle.jdbc.driver.OracleDriver</driver>
    <autocommit>true</autocommit>
    Do I need to upload anything to an ORACLE table to get the demo's working?
    Thanks in advance...
    Stephen

    - Can you connect your database using your JDBC connection string?
    "jdbc:oracle:thin:@localhost:1521:ORCL"
    - What is your SQL query?
    null

  • SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.

    Hi,
    This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
    Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
    So far I have installed
    http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
    I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
    2012 release.
    Here is the detail of error message:
    TITLE: Package Validation Error
    Package Validation Error
    ADDITIONAL INFORMATION:
    Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.  The AcquireConnection method call to the connection manager "Excel Connection
    Manager" failed with error code 0xC0202009.  There may be error messages posted before this with more information on why the AcquireConnection method call failed.
    Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
    Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
    Error at Data Flow Task: There were errors during task validation.
    Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR.  An OLE DB error has occurred. Error code: 0x80004005.
    An OLE DB record is available.  Source: "Microsoft Access Database Engine"  Hresult: 0x80004005  Description: "Unspecified error".
     (Microsoft.DataTransformationServices.VsIntegration)
    Here are my environment details:
    SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
    Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
    Services Project2\Integration Services Project2\Package.dtsx.
    Does this kind of Shared drives have any impact to give this issue?
    Thanks in advance!
    Ketan
    P.S.: I had look at this forum question -->
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssis

    Hi Arthur,
    Thanks for your response.
    Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
    1) Some times excel source files cannot be parsed by excel source connection manager.
    2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage  while destination mapping.
    3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file.  <-- For
    this we tried IMEX setting also
    4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
    I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
    As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
    Do you think it is advisable to convert Excel into CSV or Flat file.
    Thanks,
    Ketan

  • SSIS 2012 EXCEL Connection manager error

    Hello all,
    When i try to make any excel connection manager in ssis 2012 its show below error.
    "Could not retrieve the table information for the connection manager 'Excel Connection Manager'. Failed to connect to the source using the connection manager 'Excel Connection Manager' in ssis 2012 error"
    I try for it EXCEL source and EXCEL destination. Both time same error happen. 
    Before i m use ssis 2008 then its work well bt after install 2012 its start this problem. I m also change debug 64 bit in false from true.
    Thanks for help

    Hi is there any way to install 32 ACE OLE DB in 64 bit system without uninstall my other software .
    I tried yesterday to instal 32 bit ACE but its told me u need to uninstall 64 bit software first :(
    thanks
    When using the command line, you can force the installation of the 32-bit version while the 64-bit version has already been installed.
    http://blogs.lessthandot.com/index.php/datamgmt/dbprogramming/mssqlserver/force-ace-installation/
    MCSE SQL Server 2012 - Please mark posts as answered where appropriate.

  • Retain Same Connection = True - Property Set up for Connection Manager in SSIS 2012- Please help!

    Hi,
        I have a solution with 20 packages.  Target Database is same for all the packages, only target tables are different. All are working fine.
    Now,as part of a new requirement,I have to change some logic in one of the packages.I have to create few 'Global Temp Tables' on the fly and populate some data into it and use those tables for update and delete in both control and data flow.
       Since I am creating and using Global tables on the fly, I have to set up 'Delay Validation = True' for the package and the DFTs.
    Then, most important thing is, I have to set up 'Retain Same Connection = True' for the 'Target database' connection because only then, I assume,the package will not throw errors like 'Tables are not available'.
    My doubt is, if I change the Retain Same Connection = True, will it create any issue for the other packages, as all other packages are using the same connection manager.
    I am using SSIS 2012.
    Thanks for your help!
       

    Although 'RetainSameConnection' is a property of the Project Connection Manager, it only works within a package, but as soon as an other (child) package starts, you will loose the connection.
    Safest option is probably to use a separate package connection manager.
    Please mark the post as answered if it answers your question | My SSIS Blog:
    http://microsoft-ssis.blogspot.com |
    Twitter

  • My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    My  2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG.  The Network Preferences says "cable unplugged".  The WiFi connection is working fine.  Please Thank You

    Never mind, problem solved.  When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually.  Have a nice day @:-)#

  • Cannot find the Novell Connection Manager for LDAP

    Novell Connection Manger for Java/LDAP
    Cannot find the Novell Connection Manager for LDAP in download
    I am trying to connect through a Java client to the Apache Directory Studio, LDAP server....I have downloaded the classes from the download page...see link below...but I can't see the NovellConnectionManager Class anywhere in this download when I use the open freely application to view the jar details.
    LDAP Classes for Java
    Environment: Windows 7

    Hi MentalSuplex, and a warm welcome to the forums!
    Don't know about Airport cards for it, but other options...
    http://eshop.macsales.com/item/Sonnet%20Technology/N80211PCI/
    Maybe this one, ask them...
    http://eshop.macsales.com/item/Newer%20Technology/MXP802NPCI/
    I use these...
    http://eshop.macsales.com/item/Newer%20Technology/MXP2802NU2C/
    http://eshop.macsales.com/item/Edimax/EW7711UMN/

  • HT204266 App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop

    App store icon dissappeared from screen on ipad2, also cannot download or manage my apps in itunes when connected to my desktop. Need help!!

    For the App Store icon check Settings>General>Restrictions. You may have restricted the installing of apps and the icon will disappear.
    If that's not it, swipe from screen to screen as you may have moved the icon.
    You can also reset the home screen layout and the icon will reappear - but the home screen will return to the way that it looked when you first activated your iPad.
    Settings>General>Reset>Reset Home Screen Layout.
    More information is needed about the apps not syncing or downloading. Are you signed into the same ID on the iPad as your are using in iTunes on your computer and are you talking about iTunes on the computer being the problem?

  • Could not create a managed connection manager ; SSIS package from SSMS - Windows 7 64 bit

    I created connection as Oracle provider for .Net.
    In data flow, using the ado net source. select data access mode as SQL command.
    When click preview. data is coming.
    But when right click the dataflow task --> execute task.
    data flow is failed with following error
    [ADO NET Source [1]] Error: Microsoft.SqlServer.Dts.Runtime.DtsCouldNotCreateManagedConnectionException: Could not create a managed connection manager. at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String
    connStr, Object transaction) at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction) at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100
    wrapper, Object transaction)

    Do you run it under 64bit?
    if yes, go to Project menu, select project properties.
    in the project properties window, go to Debugging tab, and set Run64BitRuntime as false. and try again.
    http://www.rad.pasfu.com

  • "Radio Off" and cannot be turned on via "Manage Connections"

    Hey all, hoping someone has seen this before on the Curve.  I ran low on power and the radio shut off, but now no matter what I do that has previously worked, (Make a call/go into manage connections-"Turn on all connections") the radio won't turn on.
    Any ideas or tips before I commit BlackBerrycide?
    Solved!
    Go to Solution.

    That happened to me before too when the battery ran real low and I wasn't able to turn it on until the battery was over 25%.  Have you charged the phone?
    ~Lorrie~ Master of All Things Blackberry!

  • SSIS 2005 and SSIS 2012 Have Different Data Flow Output

    Hi Guys,
    I'm currently converting our SSIS 2005 packages to 2012 and I'm finding an odd difference on the Data Flow Output when it imports a txt file to a table.
    We have a pipe delimited file ( contains a totals on the bottom row).
    CATNO|Title|Total Stk Avail|Stk on Order|Rank|QOH|Allocated|Reserved|BackOrd|WIP|Cleared|Held
    CATNUM000067|Fast and Furious|9804|0||9804|0|0|0|0|0|0
    CATNUM000068|Frozen|0|0||0|0|0|0|0|0|0
    CATNUM000029|Brave|0|0||0|0|0|0|0|0|0
    CATNUM000029|Brave with Kinect|0|0||0|0|0|0|0|0|0
    CATNUM000029|Big Hero|0|0||0|0|0|0|0|0|0
    CATNUM000057|Transformers|27376|0||27376|0|0|0|0|0|0
    CATNUM000013|James Bond|121|0||121|0|0|0|0|0|0
    ,Total Available Stock,524259
    And these are the settings for the flat file connection
    In SSIS 2005, the total rows are being omitted automatically by the data flow. Basically only 7 rows are inserted whereas in SSIS 2012. 8 rows were inserted including the totals.
    if we think about it, SSIS 2012 is correct since we just feed what's ever in the file.
    But on the conversion and testing perspective, it's now harder as there's discrepancies between those 2 version.
    I just like to check if there's any other discrepancies in terms on results/output between SSIS 2005 and SSIS 2012
    Many thanks. 

    Hi Vinxster,
    After testing the issue that Flat File Connection Manager cannot handle file with total row in my SQL Server 2005 environment, I can reproduce it.
    Based on my research, the issue is caused by the Column Delimiter gets first preference and then Row delimiter. This is by design in SQL Server 2005, SQL Server 2008 or SQL Server 2008 R2.
    Good news is that the issue is fixed in SQL Server Data Tools which comes with SQL Server 2012. In SQL Server 2012, by default, the Flat File Connection Manager always checks for a row delimiter in unquoted data, and starts a new row when a row delimiter
    is found. This enables the connection manager to correctly parse files with rows that are missing column fields.
    If you want to fix the issue in SQL Server 2005, there is a sample component posted to the CodePlex that might help you with this:
    http://ssisdfs.codeplex.com/
    References:
    http://blogs.msdn.com/b/dataaccesstechnologies/archive/2013/03/13/flat-file-source-cannot-handle-file-with-uneven-number-of-columns-in-each-row.aspx
    https://connect.microsoft.com/SQLServer/feedback/details/293193/ssis-import-of-flat-file-with-uneven-number-of-columns
    Thanks,
    Katherine Xiong
    If you have any feedback on our support, please click
    here.
    Katherine Xiong
    TechNet Community Support

Maybe you are looking for

  • Nokia Lumia 620 Volume button not working,

    Well, first of all after i bought this mobile the camera button stopped working(not fixed till now) and now the freaking volume button ain't working without a **bleep**ing reason.. And don't say the cover is damaged its not also don't say stupid thin

  • Freezing after a few minutes of screen sharing?

    Hello, when setting up a screen sharing session on mountain lion with a lion laptop (the ml is being controlled by the lion laptop), the 10.8 laptop freezes after a few minutes of the session. The mouse cursor still works locally, however no clicking

  • 'Belonging To' field in CRM 2007

    Hi, Does anybody have a clear definition of the search criteria found for the 'Belonging To' field in the Activity Search view? Belonging To is Me Belonging To is My Team Belonging To is My Group Belonging To is My Company Belonging To is My Responsi

  • Macbook pro is not wrking ??

    My Mac shows apple sign when i turn it on after that it keep processing but not able to open ?? What can i do ??

  • HP Officejet H470 BT

    I have a HP OfficeJet H470 BT and I want to know if it has 802.11 wirless. If it does, how do I set it up so I can print via an iPad (4th gen) via wirless or Bluetooth? I'm not willing to jailbreak my iPad. I have a MacBook Pro (OS X 10.8.3) and a Wi