SSIS Job creating error message.

Hi All,
I have a ssis job which is already running in production and our client has created a same job in the new server for our testing purposes. which is pointing to the correct config file in the new server and file paths are mentioned in the table for picking
the files, till now I don't have any issue it is performing as expected. but when you go to the job history and see it is saying the message similar to the below. but the path which I am getting in the below message is not in the config or the table defined
for the respective table to pick, but I observed on this thing that path is it is in the package at one of the tasks but that path is replaced while the package is running(I kept break points in the package for debug purpose and checked). but still
I am getting this message.... any thoughts guys
Message
Executed as user: URBANLSB\svc_TSsisProxy. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 10:43:59 AM Error:
2014-10-02 10:44:03.23     Code: 0xC001401E     Source: FedexFeed Connection manager "FedexFeedExceptionFile"     Description: The file name "\\Database Uploads\Test\FedexFeed\FedexFeedException\\FedexFeedErrorRecords_10022014_104400.txt"
specified in the connection was not valid. End Error Error: 2014-10-02 10:44:03.24     Code: 0xC001401E     Source: FedexFeed Connection manager "FedexFeedExceptionFile"
Description: The file name "\\Database Uploads\Test\FedexFeed\FedexFeedException\\FedexFeedErrorRecords_10022014_104400.txt" specified in the connection was not valid. End Error Error: 2014-10-02
10:44:03.25     Code: 0xC001401E     Source: FedexFeed Connection manager "FedexFeedExceptionFile"     Description: The file name "\\Database
Uploads\Test\FedexFeed\FedexFeedException\\FedexFeedErrorRecords_10022014_104400.txt" specified in the connection was not valid. End Error DTExec: The package execution returned DTSER_SUCCESS (0). Started: 10:43:59 AM Finished:
10:44:38 AM Elapsed: 39.109 seconds. The package executed successfully. The step succeeded.

\\Database Uploads\Test\FedexFeed\FedexFeedException\\FedexFeedErrorRecords_10022014_104400.txt
since the '\\Database Uploads' part has a space it breaks the package
Adding double quotes around fixes the issue.
Arthur
MyBlog
Twitter

Similar Messages

Create Error Message

Hi,
I want to create error message while user enter symbols into input field.
Plz help me with the procedure to create messages.
Regards,
Anitha

Hi,
follow this procedure,
declare the error or warning or text messages in the message pool.
we can use those message in the view using the message manager .
IWDMessageManager messageMgr = wdComponentAPI.getMessageManager();
and check if the input field or any other ui element is null then throw error messages.
if(wdContext.currentContextElement.getfieldName()==null){
messageMgr.reportContextAttributeMessage(wdContext.currentContextElement(),attributeInfo,IMessageSimpleComp.EMAIL,null,true);
here email is the required field.
refer this link,
http://help.sap.com/saphelp_nw04/helpdata/en/72/1d6526263ff24995016a152705eab2/frameset.htm
Regards,
Sunaina Reddy T

Creating Error message during creation of SC using create limit item option

Hi,
I am using option "create limit item" option to create a service SC, now i need to set an Error message if the value in the "value limit" field is lower than the value in the "expected value" field during the creation of sc and i should not be able to order such cart. Currently there is no message displayed and i can create a SC with the lower value in the value limit field.
Please suggest.
Regards
GGL

Hi. Try BBP_DOC_CHECK_BADI to issue a custom error.
Regards,
Dave.

Shopping cart not created, error message 'Error in Transfer'

Dear Guru's,
While creating a shopping cart in the product category, the system is giving an error message 'Error in transfer'. We are working in the classic scenario.
When we check in the table BBP_PDBEI, the logical system shown is SRM system. Ideally, the logical system should be that of the ECC backend system. Could you please help us where we can go wrong in the settings?
Thanks and regards,
Ranjan
Ranjan Sutradhar

Hi
Please refer to the below links
http://wiki.sdn.sap.com/wiki/display/SRM/TransferprocessoftheShopping+Cart
http://wiki.sdn.sap.com/wiki/display/SRM/Follow-ondocumentdetermination%28PR%2CPO%2CRS%29
Hopefully this would resolve your problem.
Thanks,
Ashish

Using my Actiontec modem's wifi, it doesn't find my new airport express. When I use the new airport express network I created error message says ip address is wrong. Help setting this new airport express up

Using my Actiontec modem's wifi, it doesn't find my new airport express. Using the new airport express network I just set up it says the ip address is invalid. What can I do to overcome this blinking amber light and error messages?

You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

Inserting PayPal buttons creates error messages

Hello,
I have inserted 3 "add to cart" buttons on a page that had no errors. After inserting the buttons a bunch of errors showed up, all for the code I have inserted from PayPal. The buttons are working, but what can I do about all the errors?
http://www.drluxphotography.com/lc-int-redhook-keys-format.htm
All the errors are for lines between 58 and 125.
I sent the error list as attachment tp PayPay asking for help. The reply was
" I'm not familiar with the issue or product being used. Most web editors have you enter (paste) the code and then specify where on the page it will be located. I'd contact their support or check online forums and see if someone has had a similar issue that they resolved."
This is not an answer for the question, but it gave me an idea to ask if anyone had similar problems and would help me!
Many thanks,
Marianne

Thank you ever so much! There are no more error messages!
But since I had to close "input" 30 times and "img" 3 times for the 3 "add to cart" keys I have inserted, is this something that PayPal should be doing in the code that they are creating? Or is this a DW issue? Do other users have the same problem?
I have to create over 300 keys so I wish there would be a way to avoid all the work.
But I thank you again, at least I have a solution!
Sincerely,
Marianne

Creating error message in enter query mode

Thanks u3 and am0x,
Thanks for your answer.Now i want to implement the same thing for another scnerio.
Suppose i have entered a certain date but there is no related data in the database for .I am concedering it as a error and want to show a message.
In the trigger ON-ERROR i have written this code.
DECLARE
err_code NUMBER := ERROR_CODE;
err_type VARCHAR2(3) := ERROR_TYPE;
msg VARCHAR2(2000) := ERROR_TEXT;
BEGIN
IF err_code = 40358 AND err_type = 'FRM' THEN
message('please enter date as 01-jan-2008');
END IF;
IF err_code = 40301 AND err_type = 'FRM' THEN
message('there is no related data in the database ,please enter the value again');
END IF;
RAISE FORM_TRIGGER_FAILURE;
END;
But it is not showing any message if there is no related data in the database can you please help.

That looks like it should work, but you have left out an important line which could tell you why it's not working. If the error code is not one of the two you have specified then there will be no message at all!
Try this and see what error message you get. Perhaps the code is something other than 40301.
DECLARE
err_code NUMBER := ERROR_CODE;
err_type VARCHAR2(3) := ERROR_TYPE;
msg VARCHAR2(2000) := ERROR_TEXT;
BEGIN
IF err_code = 40358 AND err_type = 'FRM' THEN
    message('please enter date as 01-jan-2008');
ELSIF err_code = 40301 AND err_type = 'FRM' THEN
    message('there is no related data in the database ,please enter the value again');
ELSE
    message(err_type||'-'||to_char(err_code)||': '||msg);
END IF;
RAISE FORM_TRIGGER_FAILURE;
END;

Creating Error Message in Reports

Hello,
I have a report that has a date range for a parameter screen. The user has requested that an error message will be displayed to prevent the user from making/entering the start date greater than the end date.
Could someone please tell me what report trigger I should use as well as some sample code to accomplish this. I would like something like, "The ending date cannot be less than the beginning date. Please enter a valid date range."
Thanking you in advance

You can only do this by validating the two parameters in the after parameter form trigger.
eg
If :start_date > :end_date then
srw.message(1, 'Your start date is bigger than your end date. Re-enter');
return(false);
end if;
Marcos

Create Error Message for wrong input of time (VC 7.1)

Hello,
I use VC 7.1.
I have an Input Field where the users have to enter the time of an event.
The time has to have this format: hh:mm:ss.
How can I check this? And if the users entered a wrong time format how can I post an error message?
Or does anybody has any other solution to handle this? But I must say to it that I don't want to use an ABAP RFC to solve this problem.
Regards,
Armin

Hello,
I use VC 7.1.
I have an Input Field where the users have to enter the time of an event.
The time has to have this format: hh:mm:ss.
How can I check this? And if the users entered a wrong time format how can I post an error message?
Or does anybody has any other solution to handle this? But I must say to it that I don't want to use an ABAP RFC to solve this problem.
Regards,
Armin

Links in e-mails create error message

I use Outlook 2007 and Firefox 7+. Clicking on an link to a web site in an e-mail works, but first generates an error message. "general failure" URL (web page address). Doing the same thing with IE 9 generates no error message. (Asus laptop with Windows 7 64 bit.)
[email protected]

Please contact the webmaster. The webmaster will then have to contact us if they require our assistance. Thank You!

HT2513 Adding nw calender to the IMac calender creates error message

On my IMac I want to add another calender. The one I also use on my Iphone. I get the following error message:
Het verzoek voor account 'iCloud' is mislukt.
De server reageerde met
'400'
op de bewerking 'CalDAVUpdateShareesQueuableOperation'.
Strange also is the fact that the calender already has items from the calender I want to include. The items that are given are only the recurring items.
Please help

I had the same issue, the calendar didn't show up after uppgrading my Iphone to IOS 5.0.1.
After reading several posts on different forums on the net (apple and synology forums). I begun to get a picture regarding my problem with caldav sync between my iPhone and my Synology diskstation. After testing the various recommended actions and settings, I found out that it was ONE setting in perticular that made the calendar and tasks show up on the iPhone.
When changing the setting under "E-mail, contacts, calendars" "Calendar - Syncronize - All events". Both the calendar and the Tasks started showing up in my iPhone. When I changed the setting back to "3 month", my preferred setting, both the Tasks and Calendar disappeared.
My conclusion is that it's the setting under E-mail ...... "Calendar - Syncronize" that makes the calendar appear and disappear from the calendar and task app.
I can't say if this is a bugg with the IOS 5 or the WEBDAV - CALDAV function on the Synology.
A fact is that the setting "syncronize: X months(weeks)" worked on previous versions of iPhone IOS (4.3.5).
I hope this exlpains and helps in fixing this bugg.
M

Backgroun job, getting error message

Hello ,
I am trying to run a report in background. In one server it is working fine, but in another server it is giving me error
"450 columns too great for format X_65_255"
line-size of report is 450. It is working fine in one 4.6c server but not in another 4.6c server.
Please advice.
regards

i am already in SPAD, but .....
can't see where to look for and create these formats
regards
well i got it thanks everyone.
I want to close this thread and reward point, but can't see radiobutton on left side, don't know why
Message was edited by: Surpreet Singh Bal

2012 R2 Hyper-V Virtual Switch Refuses to Be Created -- Error Messages Not Especially Helpful

Windows Servers 2012 R2 Standard
4 NICs
Windows 8.1 is guest of the host
Hyper-V
Virtual Switch Manager
External
Create Virtual Switch
External network
Choose a NIC that is connected to the physical Ethernet switch but otherwise unused
Tick Allow management operating system to share this network adapter
Untick everything else
Click Apply
"Error applying Virtual Switch Properties changes"
"Failed while adding virtual Ethernet switch connections."
"External Ethernet adapter "<name-of-adapter>" is already bound to the Microsoft Virtual Switch protocol."
Close
Cancel
Control Panel\Network and Internet\Network Connections
Change Properties of NIC to untick Virtual Switch protocol
Repeat steps as above
"Virtual Switch Manager for <name-of-server>"
"Error applying Virtual Switch Properties changes"
"An internal error occurred while processing the results of creating a new virtual switch."
"To refresh the results, close and then reopen this window."
Close
Dead in the Water
An internal error occurred while processing the results of creating a new virtual switch. To refresh the results, close and then reopen this window.
The first one is to use a tool called “nvspscrub.js”. Download nvspscrub.js then from cmd run: “cscript nvspscrub.js”, this will delete all vswitches, virtual NICs in the parent partition and will unbind the switch protocol from all physical NICs.
This script aborts when a class turns up undefined. Maybe this old script applies solely to Windows Server 2008. Dunno.
NVSPbind
What I do now?
It is an internal error. Internal to what?
MARK D ROCKMAN

Hi Mark,
I just came across the same issue!
After troubleshooting, I deleted all my Virtual Switches and reinstalled my WiFi and Ethernet NIC drivers.
I'm now able to create the Virtual Switches without error.
Hope this helps.
Regards
Lee

IDX2 Metadata Create Error Message l.000 File to Idoc senario

Dear All,
I got the error l:000 while creating meta data.I read all threads related to this error,but couldn't solve this.I have assigned roles SAP_XI_APPL_SERV_USER,SAP_XI_IS_SERV_USER on xi system,and tried to assign Profiles: SAP_ALL and SAP_NEW.but i couldn't see those profiles.
any help would be appreciated.Thanks in advance.
Regards
Vinay

Hi Vinay,
Please check whether you have created the IDX1 port correctly. It should use the sm59 destination pointing to the SAP Backend system (ECC/CRM). The user access to be used needs to be tested for authorizations. (Do as mentioned above)
Also remember, even if the metadata is not cached in IDX2, the interface should work if the user authorizations are correctly maintained in sm59 destinations and that is referred to in IDX1.
Once the first run is successful, the metadata is automatically cached in PI system (ABAP stack) in IDX2.
Regards,
Souvik

Crontab jobs creating mail messages

Hi,
In an effort to keep my firewire drives spinning through the working day, I have set up a crontab that writes a dummy file to each of my drives every few minutes. This works great, but sometimes I have one or more of the drives turned off, and crontab keeps sending mail messages to the internal mail store for my user.
I only noticed this when logging into terminal sessions, and getting the "you have mail" notification.
I managed to run the mail utility and delete all the messages using
delete *
However, this has no use to me, and i was wondering if there was a way to stop crontab from creating these mail messages for failed tasks?
Thanks for any help
Steve

I am absolutely no Unix guru, and I can't remember where I originally got that addition to > /dev/null from, but scroll down in
http://www.macfixitforums.com/showflat.php?Cat=&Board=tiger&Number=811075
to where Virtual1 asks pretty much the same question, and then read the reply by Hal Itosis who most certainly is a Unix guru!

SSIS Job creating error message.

Similar Messages

Maybe you are looking for