Ssis job fails on scheduled time. But works fine when executed manually in BIDS.

Message
Executed as user: Answers\Administrator. Microsoft (R) SQL Server Execute Package Utility Version 9.00.5000.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved.    Started: 5:00:01 AM Error: 2014-03-04
05:00:05.77     Code: 0x00000002     Source: SCT create SSRS Skus Not Agreement Report      Description: The script threw an exception: Object reference not set to an instance of an object.
End Error Error: 2014-03-04 05:01:39.40     Code: 0x00000003     Source: SCR Collect Info      Description: Precompiled script failed to load. The computer that is running the Script Task
does not have a compiler capable of recompiling the script. To recompile the script, see the Microsoft Knowledge Base article, KB931846 End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 5:00:01 AM Finished:
5:01:39 AM Elapsed: 97.782 seconds. The package execution failed. The step failed.
Any input on this would be appreciated.
Thanks !!!

Hi Vinay,
Generally, the error occurs because we deploy the package that contains Script Task/Component across platforms, e.g. from a 32-bit develop environment to a 64-bit production environment, and vice-versa. To avoid this issue, we need to open the package in
BIDS on the destination server, recompile the Script Task/Component, and redeploy the package. If you have not recompiled the Script Task/Component on the destination server, maybe you deployed the package from a different 64-bit platform.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
It used to work fine, this only seems to have been a problem in recent weeks
Any help or advice would be much appreciated
Thanks
Ian

It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

Mail won't send mail when in wireless mode but works fine when wired

Ok, this happens all the time. I have several pop email accounts, all of which work fine when I am hooked in to an ethernet cable, but Apple Mail won't send any of my outgoing mail form any of my accounts when i'm am working wirelessly.
I always get a message like:
Cannot send message using server smtp.name.net
I try to switch servers and I cycle through all of them, getting them same message, followed by things like:
The server response was: 5.1.2 Bad or missing RCPT domain k39sm5757680wah
Any advice.

Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
You may use “network locations” to more easily switch between network settings if necessary, as described here:
Using network locations in Mac OS X

Gray screen on start up, but works fine when hard disk in usb

Im using a Mac book pro which is around 2-3 years old now i think. Anyway, a few days ago it froze while using it, when i restarted it i just got a blank grey screen (no spinning wheel or apple logo) and it just stays there.
I replaced the standard hard drive with a samsung 840 EVO ssd 250gb a few months back and it has worked fine since.
I tried all the setup/safe mode keys during start up and it still gets stuck on the same blank screen.
I took it to the "genius" bar at the apple store and the guy that served me said it was a problem with the hard drive and told me to wipe it and reinstall the os. I've just taken the hard drive out and connected it via usb port, using the connector provided with it, to try and get into setup mode this way, however the laptop now starts and works perfectly fine with the hard drive connected this way. I tried connecting it internally again and got the same problem with the grey screen again.
Im very annoyed the so called "genius" at the apple store told me it was a fault with the hard drive when it is clearly functioning properly and almost had me erase it and loose all my things. Very poor customer service and even poorer knowledge on his part.
Has anyone had a similar problem or have an idea what it might be?

Darren,
one possibility is that your MacBook Pro’s internal SATA cable could be faulty, since your SSD works well externally but doesn’t work well internally.

New MBP Retina wifi is awful - even with bluetooth off! But works fine when using Ubuntu 13.04

Hello - I've recently as of last week - purchased a new Macbook Pro Retina.
I've dual booted it with Ubuntu 13.04.
The wifi is terrible when logged into the OSX. However, works fine in Ubuntu! I've tried turning bluetooth off as suggested in many forums, but to no avail.
Any idea - my first Mac too, so I'm trying hard not to give up and just return it for something else!
Thanks

Was the OS X wifi terrible before or after you installed Linux?
Linux is not a Apple approved operating system for running on Mac's.
The open source community has a different philosphy than commerical companies like Apple or Microsoft, it might be that your OS X wifi drivers was surplanted with those from Linux and thus OS X can't recognize them and defaulted to a more basic mode of a slower speed.
Apple doesn't provide drivers publically for Mac's, so it's some third party hacker, with quesitonable skills and non-communication with Apple, that's providing the drivers. So there is a problem there, which I've found out about myself when installing Linux on older Mac's.
I advise Linux and other non-approved operating systems to be run in a virtual machine program instead.
Install Windows or Linux into VirtualBox
Unfortuntly to fix your system and uninstall Linux, which is designed to be installed on generic PC's, is to erase your ENTIRE boot drive, including the hidden EFI parititon where Linux installs it's swap file.
I suggest you take your machine into Apple and tell them what you did.

My site fails to display properly, but seems fine when previewed in Flash.

Very basic set-up: I have a Flash page that previews perfectly fine when in Flash, but after uploading the .html and .js files to my host, my website doesn't display. However, the color background of the page is displayed, and the vertical scroll bar is active (because the page is very tall), but nothing shows up. Might anyone have an idea of what my problem is?

This is just a wild guess but... Be sure that you have
properly embedded any needed fonts for dynamic or input
text.

Data type change made to schema.xml of comments list which is part of blog site template is not reflecting in the existing site but working fine when new site is created.

Hi,
I have created a blog site with the available site template few days back. Now we have the requirement of having the attachments in the body of the comments section.
So, I updated the schema.xml of the comments list available under ../templates/blog/lists/comments/schema.xml to have rich text for the Body field.
With this change, I created a new site and it was working fine. Change is reflected in the new blog site.
However, this particular change is not reflected in the existing blog site. Any changes made to the schema.xml is not effecting the old blog site.
Can anyone suggest what can be done for the change to be reflected in the old blog site?
Thanks in Advance,
Regards, Keerthi Suryadevara

Hi,
According to your post, my understanding is that you wanted to add attachments in the body of the comments section.
You can add the the Code inside the Default list pages. For more information, you can refer to:
Enable Attachment in SharePoint Blog post list and display the list Attachments
In addition, you can add an enhanced rich text field to the comment list and remove the body field. Then you can insert files into comments, too.
Here is a similar thread for your reference:
http://sharepoint.stackexchange.com/questions/77194/how-to-add-attachments-for-comments-list-in-sharepoint-blog-2010
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Mounting partition fails at boot time, but works after system is up

**EDIT: ok, I know now the daemon array comes too late. Looks like I have to fiddle with initial ramdisk or mount the partition daemon-style. Which is recommended?**
I have a fakeraid array which works well with device-mapper. I use dmraid as a daemon to create the nodes.
No problem when I mount the partition after boot. But now I want to move my /home there, so it has to mount during boot.
When I have it inside fstab, I get a corrupt superblock error during boot and arch throws me into an maintainance shell.
What's wrong? Is fstab processed before the daemon array? If that is the case, what would be a good clean way to launch dmraid if it cannot be a daemon?
Last edited by mindfall (2008-01-24 01:14:58)

All you should have to do is put dmraid in the HOOKS line in /etc/mkinitcpio.conf and rebuild your kernel (pacman -S kernel26). This will enable you to even have your root partition on the raid array. Edit /etc/fstab to include your home as usual using the device-mapper created raid-set and correct partition.
Wiki on dmraid

Unhandled exception when code runs for the first time,but works fine the second

Hi All,
I have the following code snippet
private void RGL_Click(object sender, RibbonControlEventArgs e)
Word._Document oDoc;
oDoc = Globals.ThisAddIn.Application.ActiveDocument;
object start = oDoc.Content.Start;
object end = oDoc.Content.End;
oDoc.Range(ref start, ref end).LanguageID = WdLanguageID.wdEnglishCanadian;
oDoc.Range(ref start, ref end).NoProofing = 0;
Microsoft.Office.Interop.Word.ReadabilityStatistic DocStats;
DocStats = oDoc.ReadabilityStatistics[10];------>exception occurs here when code runs first time
MessageBox.Show(DocStats.Name + " " + DocStats.Value);
When I copy paste a document and click on the button it raises a COM exception but if I click continue and click on the button again, the correct grade level score is displayed.Cant figure out why this is happening.

Thanks for the answer Eugene, this exception never shows up if I type something and click on the rgl button , but if i open a huge document that is already in Canadian english and click on this ribbon it gives me the following exception
System.Runtime.InteropServices.COMException was unhandled by user code
HelpLink=wdmain11.chm#36966
HResult=-2146824090
Message=Command failed
Source=Microsoft Word
ErrorCode=-2146824090
StackTrace:
at Microsoft.Office.Interop.Word.ReadabilityStatistics.get_Item(Object& Index)
at UsabilityMapping_V01.Ribbon1.RGL_Click(Object sender, RibbonControlEventArgs e) in <my path> 1211
at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ControlActionRaise(IRibbonControl control)
at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ButtonClickCallback(RibbonComponentImpl component, Object[] args)
at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.Invoke(RibbonComponentCallback callback, Object[] args)
at Microsoft.Office.Tools.Ribbon.RibbonMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.System.Reflection.IReflect.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[]
namedParameters)
InnerException:

Iphone alarm doesn't work when the phone is charging but works fine when it is not plugged in, any reason for this?

Recently my alarm hasn't been going off on my phone when it is plugged into the charger. This is a problem as i have work most mornings and have been late. When it is not plugged in the alarm works. I know it would mae sense to charge it before i go to sleep, take it off the charger, set the alarm then wake up but was just wondering if there was any reason why I might be experiencing this issue?
Cheers

This is something peculiar, normally that doesn't work that way
when did this happen? if it just happened, then something probably went wrong with either the software or the hardware
do charge the proper way, and see if it happens again
or try completely draining the battery, and charge it to 100% and see if its gonna solve the issue with the alarm

HT1444 Screen is blank on startup but works fine when doing a safe boot. What could be wrong?

I have a Mac book pro 15 inch and the screen goes blank on startup. Screen comes up on safe boot. Also updated OS on line and do not have a backup disk to repair from. What should I do?

got system to boot up in safe mode and went into disk utility and did a repair on disk permissions and restarted, now everything seems to be working as it should. Now i don't have to go out and buy a new Mac but than again maybe I should.

Query filtering rows in the ViewObject but works fine when run in sql

Hello,
The below query returns 8 rows when run in SQL Plus but the same query when used in the viewobject, its only returning 4 rows. I tried in all possible ways but not sure what's happening.
SELECT
tt.assignment_number,
tt.tab_name,
tt.old_value,
tt.new_value,
tt.oracle_value
FROM TestTable tt
WHERE tt.ppa_id = :1
AND ((:2 IS NULL) OR (:3 = tt.old_col))
AND ((:4 IS NULL) OR (:5 = tt.new_col))
Any suggestions are appreciated.
Thanks
--KK

Try this
OAViewObject OAViewB = (OAViewObject)OAAppl.findViewObject("DisplayDetailsVO");
OAViewB.setWhereClauseParams(null);
OAViewB.setWhereClauseParam(0,Integer.parseInt(Pid));
OAViewB.setWhereClauseParam(1,Changes_Flag);
OAViewB.setWhereClauseParam(2,Changes_Flag);
OAViewB.setWhereClauseParam(3,Oracle_Flag);
OAViewB.setWhereClauseParam(4,Oracle_Flag);
OAViewB.setMaxFetchSize(-1);
OAViewB.executeQuery();
Thanks
Shree

HT3964 macbook pro will not start on battery power works fine when plugged in

My macbook pro 15 inch early 2008 model will not start on battery power but works fine when plugged in.

check the battery info.. >about this mac>more info>system report and select "power" on the lefthand column. How many cycles? What does it say about the condition? etc.

BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) env

Hello,
BPEL process fails in SOA (in UNIX), but works fine in SOA (in Windows) environment
Step 1: Build a asynchronous BPEL process which has no extra node. Make and deploy it in 'local windows desktop SOA' server
The BPEL process has three nodes:
a. client - on the left side of the swim lane
b. receiveInput - first node in swim lane (client calls 'receiveInput')
c. callbackClient - second and last node in the swim lane ('callbackClient' calls client)
Step 2: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
Step 3: Now, I can see the successfully completed BPEL instance in the BPEL console.
Now,
Step 4: Deploy the same BPEL process (dummy asynchronous) in the SOA server (hosted in unix box)
Step 5: Go to BPEL console and 'Initiate' the BPEL process -> 'Post XML Message'
Step 6: I find that the BPEL instance appears to have ended in error (on the second node i.e. callbackClient )
With the following error message
+<invalidVariables xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>9710</code>+
+</part><part name="summary"><summary>Invalid xml document.+
According to the xml schemas, the xml document is invalid. The reason is: Error::cvc-complex-type.2.4.b: The content of element 'DummyBPELProcessProcessResponse' is not complete. One of '{"http://xmlns.oracle.com/DummyBPELProcess":result}' is expected.
Please make sure that the xml document is valid against your schemas.
+</summary>+
+</part></invalidVariables>+
Has anyone faced similar issue as above ?
i.e. process works find in windows environment (local SOA), but fails in SOA server in UNIX environment
Appreciate your help in understanding this issue.
Thanks,
Santhosh

Hello,
The fix to this issue appears to have been as follows:
+<schema attributeFormDefault="unqualified"+
+     elementFormDefault="qualified"+
+     targetNamespace="http://xmlns.oracle.com/DummyBPELProcess"+
+     xmlns="http://www.w3.org/2001/XMLSchema">+
+     <element name="DummyBPELProcessProcessRequest">+
+          <complexType>+
+               <sequence>+
+                    <element name="input" type="string"/>+
+               </sequence>+
+          </complexType>+
+     </element>+
+     <element name="DummyBPELProcessProcessResponse">+
+          <complexType>+
+               <sequence>+
+                    <element name="*:result*" type="string"/>+
+               </sequence>+
+          </complexType>+
+     </element>+
+</schema>+
In DummyBPELProcess.xsd,
modifiying "result" to ":result" appears to have resolved the issue in SOA under unix environment.
If anyone can explain why "result" works in SOA under windows and ":result" works in SOA under unix environment, I would really appreciate your help.
Thanks,
Santhosh

I can't hear anything when making calls no dailing tone or anything but when I try and audioface time it works fine please help

I can't hear anything when making calls no dailing tone or anything but when I try and audioface time it works fine please help

Hi Nfrith1,
Please take a look at the article referenced below, the same as in my original reply. The receiver on the iPhone does not have anything to do with the speakers on the bottom of the phone nor your microphone.
Clear the receiver
The iPhone receiver won't work properly if it's blocked or dirty. Here's where the receiver is:
Follow these steps, testing after each:
Make sure nothing is blocking the receiver, such as a case or film.
If you have a new iPhone, remove the plastic film on the front and back of the device.
Check the receiver opening to see if it's blocked or dirty. If necessary, clean the receiver opening with a clean, small, dry, soft-bristled brush.
While you're on a call, turn on speakerphone. If you still can't hear, then your network or reception could be the issue. Try calling again later or from a different location.
Restart and update
Restart your iPhone and test again.
If there's still no sound or poor sound quality, update to the latest version of iOS.
Get more help
If you've tried these steps and there's still no sound or poor sound quality from your iPhone, contact Apple Support.
Learn what to do if other people can't hear you on a call.
If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone
Take care,
Alex H.

Ssis job fails on scheduled time. But works fine when executed manually in BIDS.

Similar Messages

Maybe you are looking for