SSIS: Merge Problem: the input is not sorted (for use in exporting a multi-record format file)

I am using the following useful article regarding exporting a multi-record file:
http://vsteamsystemcentral.com/cs21/blogs/steve_fibich/archive/2007/09/25/multi-record-formated-flat-file-with-ssis.aspx
I have created the 2 datasources, ordering each on a field commmon to both.
I have created the two derived columns headers and am now moving on to the merge.
It is failing with the following error:
"the input is not sorted"
And whilst I definitely have an order by on the query, when I look at the metadata between the datasource and the derived column, the Sort Key Position items displays "0" for all my fields, I was expecting the sort field to have a "1" in this column. What am I missing?
Any help would be most appreciated!

The thing to remember here is that the SSIS designer gets its metadata from the RDBMS - metadata like the column names, data types and sizes that describe the data being returned.
But the RDBMS metadata does not include anything about the sort order of the data.
If you have an ORDER BY clause in your source query, you need to accurately and appropriately set the IsSorted and SortKeyPosition properties in the Advanced Editor for your data source component. It is your responsibility as the package developer to ensure that you're giving SSIS the correct information. If you're not, you'll get the same errors you've posted here.

Similar Messages

"The drive is not ready for use; its door may be open. Please check drive \

3G IPOD problems which are driving me mad and i can see others have had the same problem but i can't find any solution written down.
Basically my IPOD either freezes after a couple of songs or it downloads about 6Gb (of 40) and the freezes with the following message:
"The drive is not ready for use; its door may be open. Please check drive \Device\Harddisk2\DR6 and make sure that a disk is inserted and that the drive door is closed"
I've tried re-setting, installing etc but no luck. Any suggestions/solutions?
Laptop - Packard Bell Notebook Windows XP

Hmmmm. I'm not sure how to explain this.
You need to change the Drive Letter for your iPod.
You should be able to connect your iPod then open Windows Explorer and right click on your iPod(which seems to be Drive E:) and change it to a different letter (like H).
If you haven't enabled disk use for your iPod it probably won't appear in Windows Explorer.
To enable disk use: connect iPod, open iTunes. Open Preferences and select the iPod tab. Choose "enable disk use."
Once you've done all that, try resyncing.

Why do I keep getting the message "key not valid for use in specified state"?

why do I keep getting the message "key not valid for use in specified state"?

You need to deal with Adobe Customer support. This is a Photoshop User forum the is also one for LR may be some on over there has encountered you problem Photoshop Lightroom

Problem updating Lightroom "key not valid for use in specified state"

Hi,
I am having problems with installing the update 5.6 of Lightroom from 5.2.
I downloaded and ran the updater. It has uninstalled my previous version of Lightroom but now each time I try to run the installer it fails, with the message "key not valid for use in specified state".
I have tried restarting to no avail.
Any ideas?

Searching Google for the error and Lightroom, the two forum threads that come up are:
1) Installing Muse the user wasn’t logged in as an administrator level user and after they logged in as an administrator user and did the install, again, it worked.
2) A recent Windows Update seemed to interfere with something and the user did a system restore back to a few weeks, ago, reinstalled their previous version of LR, and then installed LR 5.6 and then did the Windows Updates again and everything was ok.

Reinstalling,APSE11,from,original,CD,with,serial,number,,I,get,the,message,"Key,not,valid, for,use,in,specified,state."

While reinstalling APSE 11 (windows) from original CD (with serial number), I get the message "Key not valid for use in specified state." What do I do?

Unfortunately, you're in the wrong forum. This is not the Elements forum.
Here's the link to the forum you want:
https://forums.adobe.com/community/photoshop_elements/content

Every time i try to install itunes on my laptop for windows i get the message''key not valid for use in specified state'' any clue? '

every time i try to install itunes on my laptop for windows i get the message''key not valid for use in specified state'' any clue?

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\<User>\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

The update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

Ipone 5s
Problem
the update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.

Hi everyone yesterday I was experiencing the same problem I am glad to share its fixed now for me
"This issue is only related to our Apple ID and to to those specific apps which we already have on phone or had installed on phone before except for those apps which we already have in purchase history AppStore>Updates>Purchase History(having cloud icon next to them) it's something related to our purchase data
*ITS NOT RELATED TO PHONE!
*RESETTING OR UPDATING THE DEVICE WONT MAKE A DIFFERENCE!
(As in my case it was on iPhone 4 7.1.1 iPhone 5s 7.0.3 and iTunes of course )
Here is how I got it fixed
I contacted apple support via chat method and I asked about a solution giving my info.she told me that she submitted my application and in order to resolve this I should not be using my AppStore ID for any purchase for at least 30mins as doing so may not resolve the issue so I checked it after couple hours and it's fixed
(As I read in some other discussions that some people asked for solution from apple support and they told them to reset the device or so.. You may need to make your statement clear that it's appearing both on iTunes and iPhone )

"This drive is not ready for use; it's door may be open ..."

Hi.
I recently updated to itunes 7, and then had an issue with a corrupt file on the i-pod (which resulted in chkdsk hanging itself at 27%, always). So I restored the i-pod and that took care of that - chkdsk now says it's fine.
However - it is also empty. My machine and i-tunes recognize it fine upon start-up; however, a short while into a full synch to get my library back on the i-pod, I invariably get the following error message:
"The drive is not ready for use; it's door may be open. Please check drive \Device\Harddisk\DR 3 and make sure that a disk is inserted and that the drive door is closed." The message comes with the options "cancel, ignore and continue", yet the latter two don't make a difference, and even if I choose cancel, itunes keeps trying until it eventually crashes.
This always happens after itunes has synchronized about 1.13 GB (out of 18.55 available).
As far as I can tell, both my system and the iPod are up to date (itunes and windows update say so, anyway). E: is unequivocally and exclusively allocated to the i-pod; changing the settings from "optimize for quick removal" to "optimize for performance" has made no discernible difference.
Any ideas would be very much appreciated.
Thanks.
DELL Inspiron 4150 Windows XP

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

Drive not ready for use, door may be open

iTunes transfers about 800mb of content before error message appears:
The drive is not ready for use; its door may be open. Please check drive\...
I have restored, formatted, tried different PC's always get same result. Visited genius bar and they declared that my iPod was healthy but refused to move enough content to the iPod to reproduce the problem. iPod is a little under 2 yrs old.
My confidence and respect regarding Apple and it's products is now greatly in question. I spent $400 duchats on this thing and I am starting to feel like an unappreciated client.
Thanks for any help...

Hullo ...
let me follow up on this again. I've followed your advice, de-installed spybot, no change. I looked through the windows support help base, nothing. While trying out different things, I started getting a "delayed write failed" message, and I did some things they suggested (including adjusting the registry - me, adjusting the registry!)and it went away, and now all I get is the "open door" message again.
That is: everything works absolutely fine, I plug in the i-pod (latest version i-tunes and i-pod is up to date), it's recognized instantly by the explorer as well as i-tunes. I've run all scans you can possibly run on it, and it is fine (no corrupt files, nothing). I've restored it twice through i-tunes, twice through the explorer. I've changed the drive letter.
It starts the synch fine (it's still almost empty after the last restore), but at some point, I get the error message. Interestingly enough, *up to* that point, it'll synch fine - I can disconnect it and play on it whatever's been synched thus far. I can also modify my i-tunes settings and preferences, all of which i-tunes will recognize and adhere to. It is just unwilling to put more than 1GB of stuff onto my 20GB i-pod.
Something I've noticed is that it is sometimes indicating apparently faulty charges in the beginning (though that is quickly corrected once the synch starts), as in, it'll recognize a certain amount of audio files, but also claim a random amount of "other" files, which should not be there (apart from the 30MB or so of genuine i-pod software).
Anyhow. I haven't seen any solutions to this on the forums or in the apple help files, but people appear to be having this problem still. Any ideas or input would be very much appreciated ...
Thanks.

Cannot export private key: "key not valid for use in specified state"

Hi,
This is a bit of a long story but I hope someone can give us some guidance.
We use authentication certificates issued from our own Enterprise CA to control user and machine authentication via RADIUS/NPS for our wireless network. Certificates are deployed via group policy/autoenrollment. In general this works well but
we have an intermittent problem where user authentication stops working for a user who was fine before. The user certificate looks OK via Certmgr (shows as valid, shows that there is a private key associated with the certificate). The NPS server
logs show that the machine has been authenticated and granted access, but the user in this situation doesn't show up in the server logs at all.
The only solution in this case is to connect to the wired network and request a new certificate for the user (either via certmgr or just by deleting the duff cert and logging off/on again to get the cert via autoenrollment).
The interesting thing is that while a "working" certificate can be exported with no problem, a duff certificate cannot be exported with its private key, giving the error "key not valid for use in specified state". (Obviously the certificates
come from the same template, and the key is not marked unexportable). The key files are present in %userprofile%\Appdata\Roaming\Microsoft\Crypto\RSA and the user permissions on these files look correct.
After much searching of the forums I tried running certutil-repairstore on the duff certificate and that also returned the same error. I also tried an undocumented switch Certutil -user -key -v and again, got a very similar error "Loadkeys returned
key not valid for use in specified state. 0x8009000b (-2146893813)".
I'm assuming that the fact that the key is unexportable/corrupt is also the reason why the certificate can no longer be used for authentication.
Does anyone have any clues as to what might be causing this, and/or if a certificate with a key in this state can be repaired?
Thanks!

I can just share an experience I once had that was somewhat similar:
In this case certificates could sometimes not be enrolled and the CSP came up with a related error message.
The root was the software / driver (?) for a hardware dongle required to run some software. This "driver" added a registry key to the list of CSPs (under these HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Cryptography\Defaults\Provider - but I have seen this with
XP, so the exact location might be different now).
This fake CSP entry that had quite a weird name effectively broke other CSPs. After removing the access to / generation of keys worked fine.
So it would be interesting to know if you run some software that is "close to CSPs or cryptography".
Elke

Drive not ready for use

when i go to update my ipod, i get this error: "the drive is not ready for use; it's door may be open. Please check drive\device\harddisk2\DR4 and make sure that a disk is inserted and that the driver door is closed." then it proceedes to freeze up itunes and then the computer. So when i get this, i have to format my ipod so that i will be able to put music on it again. then after 3 or 4 updates the same thing happens. but never right after i format it. anyone have this happen before or know why this would happen? it is an older ipod, with the click wheel. and it does have the most recent update.
Windows XP

Try changing the drive letter for your iPod.
If you don't know how to do it, I'll look around a bit and find an article to help
~iBook G4 1.07GHz (Kaiya), with extra 256MB RAM ~and a red Apple logo~(Mac OS X 10.3.9)~ LaCie 160GB external hard drive~ ~3G 15GB iPod (Nakai)~ ~GiveStarsto users who earn them.~

"key not valid for use in specified state" when installing itunes

I recently uninstalled an older version of itunes, and every time i try to install the newest version it wont work.
I just keep getting the message "key not valid for use in specified state". If you know what to do could you
please make it simple. also do not send me to apple's help section, it does not have ANY answers.
thanks.

For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
There is a link to 7-zip in the Install missing components section of the user tip Troubleshooting issues with iTunes for Windows updates, but if you have the key not valid error the advice above should work, and there is no need to break down the setup file.
tt2

Site behind load balancer - Key not valid for use in specified state

Hi,
I have created a sharepoint application page to access an active end point on ADFS and establish a fedauth session. All works well in single server. But when the page runs behind load balancer with 2 servers, it fails with key not valid for use in specified
state exception. Stickiness is enabled on load balancer. verified that.
I had made few changes to config file in microsoft.identitymodel section to accomodate adfs custom login. This included removing securitytokenhandlers and issuertokenresolvers as well. Is this impacting the encryption/decryption in anyway?
Any pointers would help.
Reference point for my application page : http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=76

Hi,
As I understand, you encountered the error “Key not valid for use in specified state” when ADFS custom login.
In order to run in Windows Azure Web Sites a Web application which uses WIF for handling authentication, you must change the default cookie protection method (DPAPI, not available on Windows Azure Web Sites) to something that will work in a farmed environment
and with the IIS’ user profile load turned off.
1. If you are using the Identity and Access Tools for VS2012, just go to the Configuration tab and check the box “Enable Web farm ready cookies”.
2. If you want to do things by hand, add the following code snippet in your system.identitymodel/identityConfiguration element:
   <securityTokenHandlers>
     <add type="System.IdentityModel.Services.Tokens.MachineKeySessionSecurityTokenHandler,
             System.IdentityModel.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
      <remove type="System.IdentityModel.Tokens.SessionSecurityTokenHandler,
            System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" />
    </securityTokenHandlers>
There is a similar case:
http://stackoverflow.com/questions/19323287/key-not-valid-for-use-in-specified-state-error-for-net-4-5-mvc-4-application
Best regards,
Sara Fan
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Issue installing ITunes : error key not valid for use in specified state

On the latest update for iTunes for Windows the updated couldn't complete as it gave me the following message " key not valid for use in specified state". I then completly uninstalled iTunes and its components in the order advised, rebooted my system, ran the latest ITunes setup and still get the message " key not valid for use in specified state".
I have checked all the directories to ensure no remnants.
Any one got an answer to this issue as I no longer have access to ITunes. I have a Laptop running Windows Vista Business
Thanks,
Stones of Gold

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

Consistent Error Message: Key not valid for use in specified state

For several years I have been trying to use iTunes. Without success, I decided to try to reinstall the program and now I am getting the above error message.

It seems we may have a more targeted solution. Based on posts in the thread key not valid for use in specified state I've just added the following to the user tip.
For "Key not valid for use in specified state" errors try moving the folder RSA from C:\Users\<User>\AppData\Roaming\Microsoft\Crypto\RSA to say C:\RSA (just in case there should be a need to restore it) then try installing again. This folder appears to act as a cache and should be rebuilt automatically as required.
tt2

SSIS: Merge Problem: the input is not sorted (for use in exporting a multi-record format file)

Similar Messages

Maybe you are looking for