SSIS Project Created in VS 2008 and opened in VS 2010 and it is conveted.How can we open with VS 2008 again?

 
Hi ,
Iam working on SSIS project created on VS 2008. I opened the Solution using VS 2010 and it was converted.When i tried to open it with VS 2008 it throws the error as"cannot be opened from source control because it was created by a version of Microsoft
Visual Studio that is incompatible with this one.
If this is the case, you may be able to open it from source control using that version of Microsoft Visual Studio, and then use Microsoft Visual Studio to open the local copy." How can i open the solution using VS 2008 instead of VS 2010. Any help is appreciated

Thanks for the reply.how can we rollback in tfs.can you please let me know the process.
Hi moh1kumr,
You can refer to the following links to revert the changes back for the checked in files in TFS source control:
http://msdn.microsoft.com/en-us/library/ee371161(v=expression.40).aspx
http://stackoverflow.com/questions/2694644/how-to-revert-roll-back-a-checkin-in-tfs-2010
Regards,
Mike Yin
TechNet Community Support

Similar Messages

  • Office email won't open at home onFF, ofc uses Outlook Express how can I open at home?

    Office/company email uses Outlook Express to open at ofc. At home thru' you, message,"timed out," repeatedly occurs & I can't open ofc email at home?
    https://mobile.gentiva.com is the site I am attempting to access & my ofc IT tells me it is because Outlook is needed???

    Office/company email uses Outlook Express to open at ofc. At home thru' you, message,"timed out," repeatedly occurs & I can't open ofc email at home?
    https://mobile.gentiva.com is the site I am attempting to access & my ofc IT tells me it is because Outlook is needed???

  • Bridge opens file in Camera Raw 7.0.  How can I open new version/beta of ACR?

    Just installed CS6 beta and when trying to open files from Bridge into ACR, I am taken to Camera Raw 7.0.  Afraid to uninstall all CS5 files until full version of CS6 is released.  Help?

    Huh… The controls are the same as the version used in CS5.  According to the video about the Beta release of CS6, it should be different.   Here is a sreen shot of the control panel I'm seeing when I click "Open in Camera Raw" via Bridge CS6
    ***Also, just tried to save my first file and it won't save as a jpeg.  I click jpeg as file type, but it is saving as a DCM.  Missing something?  Tried to manually type in '.jpg' after file name and still tried to save as DCM.
    Thanks!

  • How can I open files from Appleworks and Pages 4.3 in Mavericks?

    I have documents I created in Appleworks and Pages 4.3 that I can't open in Pages 5.1 using Mavericks.  How can I open those files?

    Mavericks is the Operating System (OSX).
    LibreOffice [free] may be able to open your AppleWorks files but probably not perfectly.
    Pages '09 should still be in your Applications/iWork folder.
    Pages 5 can open Pages '09 files but will alter/damage them.
    Peter

  • How can I open "Place..." dialog from my plugin?

    Hello All,
    There is a "Place..." item in  "File -> ...". If we can click on "Place...",  "Place" dialog will open and asks for .ai file to place the whatever the art is there in that file in the current document. Right.
    Now what I want is, if I click on one of the button in my plugin UI, "Place" dialog will open and art will be drawn in the current document.
    I looked into the API documentation and found AIPlacedSuite::ExecPlaceRequest( ) function, but no use.
    How can I open "Place" dialog from my plugin?

    The SDK does not provide any calls to open the Place dialog directly.
    You have a few potential solutiuons, however.
    A. Implement your own file dialog box, and use the Place suite. Which I think is perhaps the most elegant solution.
    B. Programitcally create an action that opens the Place dialog. You can record an action that does this to see what file would have to be written (see "Insert Menu Item..." then type "Place", enter while recording). Then you could call the action with the Action suite.
    C. The dialog could be opened using the scripting capabilites (for instance AppleScript). Your program could then write/call the AppleScript. I know it can be done with AppleScript, and I suspect other scripting languages such as Java might be able to do it.
    Hope this helps.

  • How can I open my books in iBook saying not formatted but is downloaded?

    Since my iPad was reset unable to open my books in iBook saying not formatted how can I open?

    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch

  • How can I open my "migrated" library?

    I opened my iPhoto library by Photo on Yosemite, but it lacks photos of recent 2 years, so I want to open/add rest of that, But I cannot open migrated library already. What can I do with this situation?
    Help shows "I opened my iPhoto library by Photo on Yosemite, but it lacks photos of recent 2 years, I want to open/add rest of that, But I cannot open migrated library already. What can I do with this situation?" but I cannot run iPhoto now.

    all I can find is the message that I can not open a library that has been migrated.  How can I open my Photos? I have a new Icon (a flower) but this does not open any photos. Help!
    That message should have a button "Open iPhoto". Have you tried to press that?
    See this link:   If Photos won't open a library that you already migrated - Apple Support

  • If i create a new alias in my iCloud account, and forgot the password and can´t actually have open the account in any of the devices, how can I recover my password?

    If i create a new alias in my iCloud account, and forgot the password and I can´t actually have open the account in any of the devices, how can I recover my password?

    Welcome to the Apple Community.
    iForgot.com

  • I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download.

    I have a new Mac and I migrated mi old one to this. I can not open iTunes because a message stating "iTunes Library.itl" can not be opened because it was created in more recent version of iTunes. There is not a new version to download. How can I fix this?                             

    Go to iTunes > about iTunes.  What version are you running?  If necessary, hold down the option key while starting iTunes and create a new, test library so it will start.

  • How can I open a project made in 2000 on Final Cut Pro to migrate it to a new version?

    how can I open a project made in late 2000 on Final Cut Pro to migrate it to a new version to finish editing it? files, timeline and unfinished edit are all stored on hard drive since early 2001, with all the original miniDV tapes still in hand

    Do you still have legacy FCP? If you not you need to find someone who will open the project in FCP6.0.6 or later. Export an XML file of the project. Use 7toX to convert it to an XML format that works with FCPX. Import the converted XML file to FCP.

  • I have Reader ver 9.0. If I receive a file which is created in ver 8.00, how can I open it ver 9.0 ?

    I have Reader ver 9.0. If I receive a file which is created in ver 8.00, how can I open it ver 9.0 ?

    All Adobe Reader versions are backwards compatible, so you should be able to open Acrobat 8 and earlier documents with Reader 9.
    Do you have a specific problem with a document and Reader 9?  If so, please give more details.

  • How can I open a document created in Classic on MacOS X?  When I tried to open it, it says Classic Not Supported. What do I do?

    How can I open a document created in Classic on MacOS X?  When I tried to open it, it says Classic Not Supported. What do I do?

    The short answer is:
    Single click on the document you created in Classic, bring up your 'popup' menu (right click or control-click), select 'Open With' and choose the Mac OS X application you believe will open the document.
    If this does not work. Tell us which Classic application you created the document with and which applications you have which you believe will open your 'classic' document.

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

  • How can I open other projects?

    I want to open projects, which ı download in planetsourcecode.com in netbeans or in Sun Java Studio Enterprise 8.1.
    The problem is that open dialog of JSE or netbeans looks for a directory. And if I try to open the directory which I have downloaded, it doesnt open the project. I tried to do same with my project (made in netbeans) and there was a small sign bottom of the directory icon. And it opened project succesfully. How can I open other projects?

    Probably best to firstly copy the media folder - you could Option/drag it to the desktop. Then open a new project and go File/Import that desktop folder.
    Let us know if that works out for you.

  • How can I open a fcp7 project in the new logic pro X?

    How can I open a final cut pro 7 project in Logic Pro X?

    What are you trying to achieve? FCP7 is a movie project format, not to mention it's years old while Logic is a music sequencer. If you try to add audio and soundtracks to a movie you'll need to export the movie file and add it as a video track (just drag and drop) to your Logic project. You may want to do your editing in Logic with a LoRes version of your movie, than export your work to a lossless audio format and put that file in your Final Cut for HiRes export. Logic Pro also supports region positions as SMPTE (e.g. in the event browser), if that helps you synchronize some events.

Maybe you are looking for