SSIS XML Data Source - worked in BIDS, can't read XML in SSDT

I have an SSIS 2008 package built in BIDS (2008) that uses a series of XML locations (similar to
http://corpslocks.usace.army.mil/lpwb/xml.tonnage?in_river=AG&in_lock=42&in_mon_yr=092013) to get tonnage information and load it into a SQL Server 2008 R2 database. This has been running daily without error for over 60 days. I am now migrating
this to SSIS 2012 using SQL Server Data Tools and I am having difficulty reading the XML into the database.
The package does the following (it is pretty simple):
1. read the URLs (there are 200) from a database view into a variable object
2. a for each loop container that loops through the variable object, gets the data from each URL (the XML URL is stored as a variable) and loads it into the database
The BIDS package still works great. I first used the converter to migrate to 2012. I then recreated a package with exactly the same settings as BIDS. No dice either way. I also tried using a local xsd file, then using one inline. SSDT will recognize all
of the columns correctly when I use inline, but neither method is capable of reading the data into a table.
I know the package is going to the addresses, all of the URLs show up in the error logs. The error messages are as follows: "[Load data from tonnage url [47]] Error: The file "http://corpslocks.usace.army.mil/lpwb/xml.tonnage?in_river=AG&in_lock=42&in_mon_yr=092013"
was not found. Please verify the file path and try again."
Has anyone run into this and solved it? I think I have tried every possible setting available, with no luck. Any ideas or suggestions are appreciated. Thanks!

I have an update on this issue. I believe it is a connectivity issue or possibly a setting in SSDT.
I can access the remote XML file location through my browser. I have downloaded the XML from the remote location and my package runs using the local XML file perfectly. I have BIDS 2008 installed on the same machine and it works without a problem (using
the remote XML location). This last piece makes me think there is a network setting or something in SSDT.
Does anyone have any additional troubleshooting advice or other suggestions? My error output is included below.
Thanks!
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Error: 0xC020F440 at Data Flow Task, XML Source [31]: The file "http://corpslocks.usace.army.mil/lpwb/xml.lockqueue?in_river=GI&in_lock=01" was not found. Please verify the file path and try again.
Error: 0xC02090D0 at Data Flow Task, XML Source [31]: The XML Source was unable to read the XML data.
Error: 0xC0047019 at Data Flow Task, SSIS.Pipeline: XML Source failed the prepare phase and returned error code 0xC02090D0.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "ADO NET Destination" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task

Similar Messages

Segments in Check Writer XML data source

Hi,
Can anyone tell me what are the Segments 1-10 in the XML data source that I see for Check Writer (XML) when I use "Third Party Checks". I tried populating few fields in the Entry values for the corresponding element but that didn't work.
We need an additional field to populate some reference number that needs to be printed on the check and we would like to use one of these segments since it eliminates the customization.
- <EMPLOYEE_THIRD_PARTY_PAYMENTS>
<ORG_PAYMENT_METHOD_ID>63</ORG_PAYMENT_METHOD_ID>
<PERSONAL_PAYMENT_METHOD_ID>103704</PERSONAL_PAYMENT_METHOD_ID>
<CHECK_DEPOSIT_NUMBER>166986</CHECK_DEPOSIT_NUMBER>
<SEGMENT1 />
<SEGMENT2 />
<SEGMENT3 />
<SEGMENT4 />
<SEGMENT5 />
<SEGMENT6 />
<SEGMENT7 />
<SEGMENT8 />
<SEGMENT9 />
<SEGMENT10 />
<PRE_PAYMENT_ID>4077062</PRE_PAYMENT_ID>
<VALUE>151</VALUE>
<PREPAYMENT_ASSIGNMENT_ACTION>1363042534</PREPAYMENT_ASSIGNMENT_ACTION>
<ORG_PAYMENT_METHOD_NAME>TP Bethesda</ORG_PAYMENT_METHOD_NAME>
</EMPLOYEE_THIRD_PARTY_PAYMENTS>

Ok..found it. Those are the bank details.

BI Admin Tool and XSLT transformation for XML data source - How it works ?

Hello,
There is a possibility to import data from XML data source using BI Admin Tool.
In the import window we can point XSLT file. What is the purpose of that XSLT field?
Why I am asking ?
I thought it is smth like XSLT processor, but simply it doesnt work.
What I did:
- I pointed XML data source file
- I pointed XSLT transformation file
- Click OK, and still get the message that the XML file structure is not supported
After that I transformed that XML file with some desktop XSLT processor using the same XSLT file, and I tried to connect that file directly using BI Admin tool.Then it works. So it means that the transformation is ok.
So basically one question comes to my mind in that situation:
What is the purpose of XSLT field in BI Admin Tool when it comes to XML data source ?
(it doesnt look like XSLT processor)
Greetings
/Michal

Hi Mariano
Why you need to use XSLT for transforming XML file into ABAP table
Code is a part of some ABAP report. Looks like it is reading a file from file system and updating table after transformation
If you have requirement like you need to read XML file and then insert the data into a SAP table
You can use
File to RFC
File to Proxy scenario using SAP PI.
Please provide more inputs on requirement to help
Thanks
Gaurav

Can Discoverer be used as an XML Data source for XMLP ?

I am wondering if Discoverer can generate an XML Data Source for XMPL.
I have heard that Discoverer Viewer can have XML as an output. Is there a way of using this XML output with XMLP and, if yes, how to batch both steps ?

Hi
My understanding is that Discoverer does not generate XML data as an ouput that XMLP can consume. The XML is does generate is actually an XML RDF for Oracle Reports.
XMLP is integrated thou, when you export your Disco report to PDF thats XMLP doing the conversion to PDF for you.
Regards, Tim

Logon failed when connecting to XML data source over HTTP

I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
Does the URL for the HTTP data source have to conform to some specific pattern? For example, must the URL end in .xml?
Kelly

Sorry Brian,
This is a public forum, if no one can help you do have the option to purchase a support case:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you
Don

CollapsiblePanel with XML data source

I've been working with the CollapsiblePanel for the past two
nights. I can't make the panel collapse at runtime when I have XML
data attached.
I validated by downloading one of the Adobe Lab
CollapsiblePanel samples. I validated that I could make the sample
work from my Dreamweaver CS3 environment. Then, I added an XML data
source and retested. The panel would not collapse. Then, I took out
the XML dataset and retested the CollapsiblePanel. It worked.
Is this a design feature? I can't imagine this was designed
to work this way. I'm trying to create a scrollable div that can
collapse. I have everything working except the collapse feature.
(BTW: I tried defining a spry:region and spry:detailregion, it
didn't seem to matter.)
CODE SNIPIT
<div id="CollapsiblePanel1" class="CollapsiblePanel"
spry:region="dsWeek">
<div class="CollapsiblePanelTab">Standard Collapsible
Panel</div>
<div class="CollapsiblePanelContent">
<p>{feature}</p>
</div>
</div>

How does the xml data look like? in GML?
If the xml data set is not too large, maybe you can add them (after your application has parsed them) as additional MapViewer GeoFeatures in a map request.
Currently MapViewer (preview or production release of 9.0.4) does not support xml-only datasource.
We will look into incorporating GML or other standard-based xml datasource for a future release of MapViewer.

Create Report with CR4E and XML Data Source

Hi all,
I have a problem when create a report with CR4E that should use a XML data source. It is not possible to choose fields from the field explorer, because ther are no fields from the XML-file. Is there a general problem when using an ODA data source in CR4E? At the moment I can only create reports with a database as data source.
Please help me with a tip.
Thanks
Arnold

Hi,
After Installing CR4E Version 2 the code snippet for creating a XML-report not works as JSP. Has anywhere a hint to resolve the problem or a complete JSP-file?
reportClientDocument = new ReportClientDocument();
java.lang.NoClassDefFoundError: com/crystaldecisions/reports/common/data/CrystalResultSet
     com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.<init>(Unknown Source)
     org.apache.jsp.XMLDataSource_jsp._jspService(XMLDataSource_jsp.java:64)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:98)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:331)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
Thanks
Arnold Meier

XML Data Source

I try to use XML files as data source with Oracle Report 9i. Even if the .xml and the .dtd files are well-formed and validate is OK, Oracle Report doesn't recognize the groups, columns,... How to format correctly DTDs file?? With easy .dtd it works, but for more complex code it doesn't work.

Refer the link for data definition and Data Source format.
http://otn.oracle.com:8877/reports/help/
Advanced column Types support:
Formatting support for xml columns types, date / timeInstant : XML Simple Types columns can be defined in xml schema to specify the format for date/timeInstant types column in XML Data Source. Based on the format string mentioned in XML schema XMLPDS will parse the XML Stream and
convert the XML Data to Report specific format.
simpleType : dateformatColumn :
<xsd:simpleType name='dateformatcolumn'>
<xsd:restriction base='xsd:date'>
<xsd:pattern value='dd-MMM-yy'/>
</xsd:restriction>
</xsd:simpleType>
simpleType : dateTimefomatColumn
<xsd:simpleType name='dateTimefomatcolumn'>
<xsd:restriction base='xsd:timeInstant'>
<xsd:pattern value='MM-dd-yyyy hh:mm:ss'/>
</xsd:restriction>
</xsd:simpleType>
MaxLength support for xml string column types : By default column length for all string columns will be 4000 bytes as set in config file. Maxlength for string type columns can be overwritten by defining and using a simpletype column in XML schema used for data definition
simpleType : stringColumn
<simpleType name='stockString1'>
<restriction base='xsd:string'>
<maxLength value='7'/>
</restriction>
</simpleType>
The XML schema format with simple type :
<xsd:element name="tableName" type="tableType"/>
<xsd:simpleType name='dateformatColumn'>
<xsd:restriction base='xsd:date'>
<xsd:pattern value='format string '/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name='dateTimefomatcolumn'>
<xsd:restriction base='xsd:timeInstant'>
<xsd:pattern value='format string'/>
</xsd:restriction>
</xsd:simpleType>
<simpleType name='stringColumn'>
<restriction base='xsd:string'>
<maxLength value=' maximum column size '/>
</restriction>
</simpleType>
<xsd:complexType name="tableType">
<xsd:sequence>
<xsd:element name="rowName" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="columnName1" type="xsd:string"/>
<xsd:element name="columnName2" type="xsd:decimal"/>
<xsd:element name="columnName3" type="xsd:dateformatColumn"/>
<xsd:element name="columnName4" type="xsd:dateTimefomatcolumn"/>
<xsd:element name="columnName5" type="xsd:stringColumn"/>
<xsd:element name="columnNameN" type="xsd:date"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
XSD file using advanced column types :
<xsd:schema xmlns:xsd="http://www.w3.org/2000/10/XMLSchema">
<xsd:simpleType name='stockDate'>
<xsd:restriction base='xsd:date'>
<xsd:pattern value='dd-MMM-yy'/>
</xsd:restriction>
</xsd:simpleType>
<xsd:simpleType name='Transaction'>
<xsd:restriction base='xsd:timeInstant'>
<xsd:pattern value='MM-dd-yyyy hh:mm:ss'/>
</xsd:restriction>
</xsd:simpleType>
<simpleType name='stockID'>
<restriction base='xsd:string'>
<maxLength value='15'/>
</restriction>
</simpleType>
<xsd:element name="XML">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="G_STORE" minOccurs="0" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="STORE_NAME" type="stockID"/>
<xsd:element name="CITY" type="xsd:string"/>
<xsd:element name="REGION" type="xsd:string"/>
<xsd:element name="TRANSACTION_START" type="stockDate"/>
<xsd:element name="TRANSACTION_PHASE1" type="Transaction"/>
<xsd:element name="TRANSACTION_PHASE2" type="Transaction"/>
<xsd:element name="TRANSACTION_END" type="stockDate"/>
<xsd:element name="SALES" type="xsd:integer"/>
<xsd:element name="DESCRIPTION" type="xsd:string"/>
<xsd:element name="SALES_ROW_COUNT" type="xsd:integer"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
With Regards
Reports Team

XML Data Source Issue

Post Author: MrJames
CA Forum: Semantic Layer and Data Connectivity
I'm sure the issue is my lack of understanding on how this should work. I've created a report using an XML data source. The fields on my report come from the XML file schema, and all fields having to do with quantities selected from the schema show as numeric fields in the report designer. However, when I try to use the SUM function on these fields I only get a count, and not a sum.
When I view the XML file using XML Notepad 2007, the viewer shows these fields as text fields. So as near as I can tell, I'm reading text data into a field defined as numeric.
I can directly connect to the table in SQL Server 2005 and the sum functions work fine, however, the sum function will not sum when using the XML table.
Apparently I'm missing something here??

Hi,
Which product are you using and in which version?
Didier

XmlDataProvider .... is gone completely in my Xaml file. Why? How many different ways to deal with xml data source through WPF

I followed a procedure described in a book.
1. insert "Inventory.xml" file to a project "WpfXmlDataBinding" .
2. add the XML data source through the data panel of "blend for 2013", named it "InventoryXmlDataStore" and store it in the current document.
3. dragged and droppped the nodes from the Data panel onto the artboard.
Then I checked my Xaml file against the one provided by the book
Xaml file by the book:
<Window.Resources>
<XmlDataProvider x:Key="InventoryDataSource"
Source="\Inventory.xml"
d:IsDataSource="True"/>

<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid>
<ListBox HorizontalAlignment="Left"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="89,65,0,77" Width="200"/>
</Grid>
my Xaml file:
<Window x:Class="WpfXmlDataBinding.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="922" Width="874">
<Window.Resources>
<DataTemplate x:Key="ProductTemplate">
<StackPanel>
<TextBlock Text="{Binding XPath=@ProductID}"/>
<TextBlock Text="{Binding XPath=Cost}"/>
<TextBlock Text="{Binding XPath=Description}"/>
<CheckBox IsChecked="{Binding XPath=HotItem}"/>
<TextBlock Text="{Binding XPath=Name}"/>
</StackPanel>
</DataTemplate>
</Window.Resources>
<Grid DataContext="{Binding Source={StaticResource InventoryXmlDataStore}}">
<ListBox HorizontalAlignment="Left" Height="370"
ItemTemplate="{DynamicResource ProductTemplate}"
ItemsSource="{Binding XPath=/Inventory/Product}"
Margin="65,55,0,0" VerticalAlignment="Top" Width="270"/>
</Grid>
</Window>
All looks quite the same except the <XmlDataProvider ....> part under <Window.Resources>, which is gone completely in my Xaml file.
1, Why?
2, How many different ways to deal with xml data source through WPF?
Thanks, guys.
(ps My "WpfXmlDataBinding" runs without problem through.)

Never do yourself down Richard.
Leave that to other people.
It's quite common for smart developers to think they're not as good as they are.
I coach a fair bit and it's a surprisingly common feeling.
And to repeat.
Never use anything ends .. provider. They're for trivial demo apps. Transform xml into objects and use them. Write it back as xml. Preferably, use a database.
You want to read a little mvvm theory first.
http://en.wikipedia.org/wiki/Model_View_ViewModel
Whatever you do, don't read Josh Smiths explanation. I used to recommend it but it confuses the heck out newbies. Leave that until later.
Laurent Bugnion did a great presentation at mix10. Unfortunately that doesn't seem to be working on the MS site, but I have a copy. Download and watch:
http://1drv.ms/1IYxl3z
I'm writing an article at the moment which is aimed at beginners.
http://social.technet.microsoft.com/wiki/contents/articles/30564.wpf-uneventful-mvvm.aspx
The sample is just a collection of techniques really.
I have a sample which involves no real data but is intended to illustrate some aspects of how viewmodels "do stuff" and how you use datatemplates to generate UI.
I can't remember if I recommended it previously to you:
https://gallery.technet.microsoft.com/WPF-Dialler-simulator-d782db17
And I have working samples which are aimed at illustrating line of business architecture. This is an incomplete step by step series but I think more than enough to chew on once you've done the previous stuff.
http://social.technet.microsoft.com/wiki/contents/articles/28209.wpf-entity-framework-mvvm-walk-through-1.aspx
The write up for step2 is work in progress.
https://gallery.technet.microsoft.com/WPF-Entity-Framework-MVVM-78cdc204
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How to take XML data source from URL?

Hi,
I creating application which need to download some data from any web page. This page is creating via XSL (as stylesheet) .This XSL
process some XML "data source" and generate HTML page. I wanna ask if exist some way how to take this XML "data source"? If i used
URL and take InputStream I everytime obtain full generated HTML, JavaScript page - compiled by web browser. But if i look to "page
source" of this page in web browser i see just that XML data source which i need to take (only at start of this xml is way to xsl
style sheet).
But this problem i have only at my required page.If i tried to take another page with similar structure code, it was succesful.
Here is link : LINK
Why i dont have permision take clear xml from this page?What is so special?
Exist some way how to take this XML without generated html code?
Thank you.

I apologize for my english. I try explain my problem again:
At this url [http://eu.wowarmory.com/item-info.xml?i=33677] is web page. If you look at "page source", web page is create via XML and XSLT. I need load this data source. I used DOMParser for that:
URL url = new URL("http://eu.wowarmory.com/item-info.xml?i=33677");
DOMParser parser = new DOMParser();
parser.parse(url);
XMLDocument doc = parser.getDocument();I get exception : Exception in thread "main" oracle.xml.parser.v2.XMLParserException: Expected '?>' instead of 'EOF'
If i used it at another page (for example [http://www.w3schools.com/XML/simplexsl.xml|http://www.w3schools.com/XML/simplexsl.xml] ), compile was successful and i can work with this XMLDocument and etc.
I try load it by InputStreamReader too:
URL url = new URL("http://eu.wowarmory.com/item-info.xml?i=33677");
try {
    BufferedReader br = new BufferedReader(new InputStreamReader(url.openStream());
    String line;
    while ((line = br.readLine() != null) {
        System.out.println(line);
} catch (IOException e) {
    e.printStackTrace
}i get only compiled HTML code by web browser. At second page i load successfuly XML data - not compiled by browser.
Is possible to take original xml page source from this page? And what diferent is between this pages?
Thank you and i hope, you can translate this post without headache :-) If it will be necessary, i can more specify some details.

How to delete XML Dat Source from BW System

Hello All,
How can i delete SOAP XML data source(6A *) from BW System.
Do I need to delte the generated RFC function module for the data source ??
Cheers
POPS

Hi Sumit Kalyan
Since your are using process order, I would like to know whether you are using process management function or not.
(Especially your are following GMP scenario ? This guide line is basically used pharmaceutical industry.
If you work with GMP scenario, before your are archiving your process order, you need to create electronic batch creation and archiving.
Then you can archive your process order and delete it completely from your system.
You can check whether your are using GMP scenario or not in your process order type.
(T-CD COR4).
If you are not. All you need to do is set deletion flag and deletion indicator to your process order and then archive your process order (you can use program PRARCHP1) by using archiving object PR_ORDER (you can call this object from t-cd sara or COAC).
I hope this information help you.
best regards
Keiji

How to create a report using XML data source from Crystal Report Designer

Hi,
Iu2019m having Crystal Report Designer XI R2 SP4. Iu2019m trying to create a report using XML data source stored on disk. This is a customer order report and the xml is structured in such a way that it has an order details header part (master) and then it has several order lines (detail). One order line can have several order line characteristics (detail-detail). So what I need to know is now I can design this layout from the designer. If this was done using views I can do it with sub-reports but using xml data this seems to be different. Can you help me to design this layout? I have included the xml and xsd as well.
Thank you in advance.
Regards,
Chanaka
XML
<?xml version="1.0" encoding="UTF-8"?>
<CUSTOMER_ORDER_CONF_REP_REQUEST xmlns:xsi="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep">
    <CUSTOMER_ORDER_CONF_REP>
        <ORDER_NO>D555809</ORDER_NO>
        <PRINTED_DATE>2009-03-26T08:52:54</PRINTED_DATE>
        <AUTHORIZE_NAME>Chanaka</AUTHORIZE_NAME>
        <CUSTOMER_NO>CU-1473-INV</CUSTOMER_NO>
        <CUST_NAME>Mr.Johan Matts</CUST_NAME>
        <SHIP_ADDR_1>93,Main Street</SHIP_ADDR_1>
        <SHIP_ADDR_2>Negambo Road</SHIP_ADDR_2>
        <SHIP_ADDR_3>Watthala</SHIP_ADDR_3>
        <SHIP_ADDR_4>SRI LANKA</SHIP_ADDR_4>
        <BILL_ADDR_1>93,Main Street</BILL_ADDR_1>
        <BILL_ADDR_2>Negambo Road</BILL_ADDR_2>
        <BILL_ADDR_3>Watthala</BILL_ADDR_3>
        <BILL_ADDR_4>SRI LANKA</BILL_ADDR_4>
        <CUSTOMER_PO_NO>112984638</CUSTOMER_PO_NO>
        <CUSTOMER_FAX>112984639</CUSTOMER_FAX>
        <CUSTOMER_EMAIL>abcbababab</CUSTOMER_EMAIL>
        <ORDER_LINES>
            <ORDER_LINE>
                <LINE_NO>1</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP11</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>iPod</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1200</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID xsi:nil="1"/>
                        <CHARACTERISTIC_VALUE xsi:nil="1"/>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>2</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP24</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>XGA Projector</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1500</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>3</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Instalation</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>3</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP02</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony DVD Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1000</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1000</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free 5 DVDs</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>4</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP99</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Flatscreen TV</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>1500</SALE_UNIT_PRICE>
                <PRICE_TOTAL>1350</PRICE_TOTAL>
                <DISCOUNT>10</DISCOUNT>
                <PRICE_QTY>1</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free Delivery</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>1 year additional warranty</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
            <ORDER_LINE>
                <LINE_NO>5</LINE_NO>
                <CUSTOMER_PART_NO>NW-IP56</CUSTOMER_PART_NO>
                <CUSTOMER_PART_DESC>Sony MP3 Player</CUSTOMER_PART_DESC>
                <SALE_UNIT_PRICE>200</SALE_UNIT_PRICE>
                <PRICE_TOTAL>400</PRICE_TOTAL>
                <DISCOUNT>0</DISCOUNT>
                <PRICE_QTY>2</PRICE_QTY>
                <ORDER_LINE_CHARACTERSTICS>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>1</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free carry belt</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>2</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>Free promotional 4GB memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                    <CHARACTERISTIC_ITEM>
                        <CHARACTERISTIC_ID>3</CHARACTERISTIC_ID>
                        <CHARACTERISTIC_VALUE>No warranty on memory bar</CHARACTERISTIC_VALUE>
                    </CHARACTERISTIC_ITEM>
                </ORDER_LINE_CHARACTERSTICS>
            </ORDER_LINE>
        </ORDER_LINES>
    </CUSTOMER_ORDER_CONF_REP>
</CUSTOMER_ORDER_CONF_REP_REQUEST>
XSD
<?xml version="1.0" encoding="UTF-8"?>
<?report module="ORDER" package="CUSTOMER_ORDER_CONF_REP" ?>
<xs:schema targetNamespace="urn:ifsworld-com:customer_order_conf_rep" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns="urn:ifsworld-com:customer_order_conf_rep" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:element name="CUSTOMER_ORDER_CONF_REP_REQUEST">
<xs:complexType>
<xs:all minOccurs="1" maxOccurs="1">
<xs:element name="CUSTOMER_ORDER_CONF_REP">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="50">
<xs:element name="ORDER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="PRINTED_DATE" type="xs:dateTime" nillable="true" minOccurs="0"/>
<xs:element name="AUTHORIZE_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PO_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUST_NAME" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SHIP_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_1" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_2" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_3" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="BILL_ADDR_4" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_FAX" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_EMAIL" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINES" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="ORDER_LINE">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="39">
<xs:element name="LINE_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="SALE_UNIT_PRICE" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_TOTAL" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="DISCOUNT" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="PRICE_QTY" type="xs:float" nillable="true" minOccurs="0"/>
<xs:element name="CUSTOMER_PART_NO" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CUSTOMER_PART_DESC" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="4000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="ORDER_LINE_CHARACTERSTICS" nillable="true" minOccurs="0">
<xs:complexType>
<xs:sequence minOccurs="0" maxOccurs="unbounded">
<xs:element name="CHARACTERISTIC_ITEM">
<xs:complexType>
<xs:choice minOccurs="0" maxOccurs="6">
<xs:element name="CHARACTERISTIC_ID" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
<xs:element name="CHARACTERISTIC_VALUE" nillable="true" minOccurs="0">
<xs:simpleType>
<xs:restriction base="xs:string">
<xs:maxLength value="2000"/>
</xs:restriction>
</xs:simpleType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:choice>
</xs:complexType>
</xs:element>
</xs:all>
</xs:complexType>
</xs:element>
</xs:schema>

Hi Sourashree,
Thank you for the response and ideas you have given me so far. I can get the fetch the data from the data source without any problem. That is I do the following,
1.     New Report
2.     From Create New Connection-> XML
3.     Provide the u201CLocal XML Fileu201D and have u201CSpecify Schema Fileu201D checked -> Next
4.     Provide the u201CLocal Schema Fileu201D -> Finish
Then I can see the following under XML
+ CUSTOMER_ORDER_CONF_REP_REQUEST
        CUSTOMER_ORDER_CONF_REP_REQUEST
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
And from here if I add the following three I can get all the fields I need to the report
     CUSTOMER_ORDER_CONF_REP_REQUEST/CUSTOMER_ORDER_CONF_REP
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE
     CUSTOMER_ORDER_CONF_REP_REQUEST/ CUSTOMER_ORDER_CONF_REP/ORDER_LINES/ORDER_LINE/ORDER_LINE_CHARACTERSTICS/CHARACTERSTIC_ITEM
Then I come to the Linking section. Here I canu2019t link anything. There is a common field called u201CInternal_IDu201D but I canu2019t link using it. So I get a message when I click Next. From here I add all the fields.
For this point onwards only I need help. How do I group, add fields and design the layout so I can get an report output as follows.
Date
Order number                                   Authorized code
Customer No
Name
Phone
Fax email
Shipping address 1                              Billing Address 1
Shipping address 2                              Billing Address 2
Shipping address 3                              Billing Address 3
Shipping address 4                              Billing Address 4
Order Line 1 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026                      LINE_NO     CUSTOMER_PART_NO          CUSTOMER_PART_DESC     SALE_UNIT_PRICE     PRICE_QTY     DISCOUNT     PRICE_TOTAL
Characteristic details belonging to Order line 1       CHARACTERISTIC_ID 1 CHARACTERISTIC_VALUE1
                                       CHARACTERISTIC_ID 2 CHARACTERISTIC_VALUE2
                                       CHARACTERISTIC_ID 3 CHARACTERISTIC_VALUE3
Order Line 2 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 2
Order Line 3 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 3
Order Line 4 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 4
Order Line 5 detailsu2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026u2026
Characteristic details belonging to Order line 5
How can I achieve this kind of a layout using the give xml and xsd? Should I use grouping if so how should I do the grouping?
I have included the full xml and xsd in the first mail I posted but I canu2019t see it now. I can include that again if you want.
Regards,
Chanaka

How to Write Log Message in a XML Data Source Report

Hi Friends,
Can anyone help me out what is the process of writing a log file in the XML Data Source Report. for eg: in Plsql we use FND_LOG.PUT_LINE to print the Log message in the Concurrent Request Output. in the similar manner, when we develop a report using XML, where we write Coding in XQuery of XML, what is the process need to follow to print the logs for the XQuery.
Any inputs/Suggestion on this Highly appreciable.
Thanks in advance.

Create an RMI application (for example) that writes the log, and let all logging calls call that remote application.
Something like that is the only feasible way that doesn't require you to have a drive on the remote machine mapped to the local one (which causes its own problems as you could have multiple simultaneous write attempts...).

Problem in filling jasper report with XML Data source

Hello!
I am trying to build a report uxing xml data source..Please verify following code:
String outFileName = "c:/Report1.pdf";
File xmlFileName = new File("C:/Program Files/JasperSoft/iReport-1.2.5/report.jrxml");
String recordPath = "/SiteDetails/Site";
JasperDesign jasperDesign = JRXmlLoader.load(xmlFileName);
JasperReport jasperReport = JasperCompileManager.compileReport(jasperDesign);
JRXmlDataSource jrxmlds = new JRXmlDataSource(new File("c:/NewSite.xml"),recordPath);
HashMap hm = new HashMap();
try
JasperPrint print = JasperFillManager.fillReport(jasperReport,hm,jrxmlds);
JRExporter exporter = new net.sf.jasperreports.engine.export.JRPdfExporter();
exporter.setParameter(JRExporterParameter.OUTPUT_FILE_NAME,outFileName);
exporter.setParameter(JRExporterParameter.JASPER_PRINT,print);
exporter.exportReport();
catch (JRException jre)
jre.printStackTrace();
catch (Exception e)
e.printStackTrace();
My Xml file is:
<?xml version="1.0" encoding="UTF-8"?>
<SiteDetails>
<Site>
<Name>Site1</Name>
<Addr>Bangalore</Addr>
<supersiteid>null</supersiteid>
</Site>
<Site>
<Name> Site2</Name>
<Addr> Madras</Addr>
<supersiteid>Site1</supersiteid>
</Site>
</SiteDetails>
I want to display details of Siteand Address..My program works fine but displays only 1 (first) record...What should i do to display the full file..do i need to navigate thru the file and give that as an input to fillReport ()method...

Hi,
Have a look at below URL.
http://ireport.sourceforge.net/cap7.html#7.4
Regards
VInK

SSIS XML Data Source - worked in BIDS, can't read XML in SSDT

Similar Messages

Maybe you are looking for