SSL connections to MySQL

I'm setting up Filr 1.0.1 and using external MySQL server instead of the MySQL Appliance. I have set up the MySQL server to allow SSL connections as described in http://dev.mysql.com/doc/refman/5.5/...nnections.html.
Can Filr be configured to use SSL connection for MySQL?

Joseph Marton wrote:
> This has not been tested and isn't supported, though that's not to say
> you might not be able to get it to work. If the Filr, MySQL, and
> Search appliances are all on the internal network another way to
> secure the connections would be to put the appliances into their own
> VLAN. This would keep the traffic separated from all other network
> traffic and help secure it.
A followup to this... another option is to add a second NIC to the Filr
appliance. This way you could have one NIC connected to your internal
or DMZ network, and the other could be connected to an isolated VLAN
which only has the MySQL & Search appliances connected. Today we don't
support multiple NICs in the Filr appliance, but that's coming in Filr
1.1.
Your world is on the move. http://www.novell.com/mobility/
BrainShare 2014 is coming. http://www.novell.com/brainshare/

Similar Messages

Cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.

when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inch

I also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010.

Connection to MySQL via ODBC not working

Hello all together,
I've got a problem with the ODBC connection to MySQL. The connection via ODBC is established and things like tnsping are working.
When I select some data within the SQL*Plus environment, I get no real result. For example "select table_name from all_tables@mysql;" returns nothing.
My entry in listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME=odbc_mysql)
(ORACLE_HOME=D:\oracle\product\11.0.1\db_1)
(PROGRAM=dg4odbc)
My entry in tnsnames.ora:
MYSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA = (SID=odbc_mysql))
(HS=OK)
The initodbc_mysql.ora in ORACLE_HOME/hs/admin/:
HS_FDS_CONNECT_INFO = odbc_mysql
HS_AUTOREGISTER = TRUE
HS_DB_NAME = hsodbc
I tried some modifications but I still get no data from mysql database. When I try "select * from customer@mysql;" I get the correct number of records, the correct column names, but the content is always "¬¬¬¬". The odbc driver works, because with MS Access I can fetch the data. I'm using Oracle 11g Release 1 EE and MySQL ODBC 5.1.5.
What could be the reason for this?
Greetings,
Joerg

created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
SQL> select * from "movieclass"@mysql;
idClass
ClassName
123
H e l l o
As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
Here the data type mapping:
SQL> desc "movieclass"@mysql;
Name Null? Type
idClass NUMBER(3)
ClassName NOT NULL NVARCHAR2(50)
What's the exact version of DG4ODBC you're using? 11.1.0.7?
According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
6890831 Oracle Database Family: Patchset
11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
and then please apply also the latest patch:
8689191 Oracle Database Family: Patch
ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
There was a high/low byte issue
Edited by: kgronau on Aug 11, 2009 10:28 AM

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

SSL Connection Configuration between Apache and Weblogic 8,1

I'm currently using Apache web server as a front end server for Weblogic server 8.1 and now i' facing some configuration problem to setting up the SSL connection between this 2 server. When i open my web application page, it shows
Failure of Server Apache bridge
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
and my proxy.log shows:
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL is configured
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: SSL configured successfully
Thu Nov 03 09:36:41 2011 <182413202842013> Using Uri /favicon.ico
Thu Nov 03 09:36:41 2011 <182413202842013> After trimming path: '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> The final request string is '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> SEARCHING id=[ebwdsk298.ebworx.com:7002] from current ID=[ebwdsk298.ebworx.com:7002]
Thu Nov 03 09:36:41 2011 <182413202842013> The two ids matched
Thu Nov 03 09:36:41 2011 <182413202842013> @@@FOUND...id=[ebwdsk298.ebworx.com:7002], server_name=[10.122.50.218], server_port=[80]
Thu Nov 03 09:36:41 2011 <182413202842013> attempt #0 out of a max of 5
Thu Nov 03 09:36:41 2011 <182413202842013> general list: trying connect to '10.122.50.48'/7002/7002 at line 2696 for '/favicon.ico'
Thu Nov 03 09:36:41 2011 <182413202842013> New SSL URL: match = 0 oid = 22
Thu Nov 03 09:36:41 2011 <182413202842013> Connect returns -1, and error no set to 10035, msg 'Unknown error'
Thu Nov 03 09:36:41 2011 <182413202842013> EINPROGRESS in connect() - selecting
Thu Nov 03 09:36:41 2011 <182413202842013> Setting peerID for new SSL connection
Thu Nov 03 09:36:41 2011 <182413202842013> 0a7a 3230 5a1b 0000 .z20Z...
Thu Nov 03 09:36:41 2011 <182413202842013> Local Port of the socket is 2121
Thu Nov 03 09:36:41 2011 <182413202842013> Remote Host 10.122.50.48 Remote Port 7002
Thu Nov 03 09:36:41 2011 <182413202842013> general list: created a new connection to '10.122.50.48'/7002 for '/favicon.ico', Local port:2121
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Connection]=[keep-alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> URL::sendHeaders(): meth='GET' file='/favicon.ico' protocol='HTTP/1.1'
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Host]=[10.122.50.218]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept]=[*/*]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[User-Agent]=[Mozilla/5.0 (Windows NT 5.1) AppleWebKit/535.1 (KHTML, like Gecko) Chrome/14.0.835.163 Safari/535.1]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Encoding]=[gzip,deflate,sdch]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Language]=[en-US,en;q=0.8]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.3]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Connection]=[Keep-Alive]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-SSL]=[false]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[WL-Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[Proxy-Client-IP]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-Forwarded-For]=[10.122.50.48]
Thu Nov 03 09:36:41 2011 <182413202842013> Hdrs to WLS:[X-WebLogic-Force-JVMID]=[unset]
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: No session match found
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: No CA was trusted, validation failed
Thu Nov 03 09:36:41 2011 <182413202841921> INFO: DeleteSessionCallback
Thu Nov 03 09:36:41 2011 <182413202842013> ERROR: SSLWrite failed
Thu Nov 03 09:36:41 2011 <182413202842013> SEND failed (ret=-1) at 789 of file ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 790 of ../nsapi/URL.cpp
Thu Nov 03 09:36:41 2011 <182413202842013> Marking 10.122.50.48:7002 as bad
Thu Nov 03 09:36:41 2011 <182413202842013> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0, line 790 of ../nsapi/URL.cpp]: at line 3078
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Closing SSL context
Thu Nov 03 09:36:41 2011 <182413202842013> INFO: Error after SSLClose, socket may already have been closed by peer
Thu Nov 03 09:36:41 2011 <182413202842013> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
Can anyone tell me what should i do in order to correct this error? Your help is kindly appreciate!!! Please~

1) Is the managed server up?
2) from apache server are you able to bind the managed server port?
3) can you pls send the weblogic ssl configuration?

Can't connect PHP/MySQL 404 error

Wow, the learning curve is killing me. Yet another challenge. I'm using Dreamweaver CC and this tutorial http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
I'm at this step:
Open comments.php. You must have a PHP page open in the Document window to create a MySQL connection.
In the Databases panel (choose Window > Databases), click the Plus button on the panel and select MySQL Connection.The MySQL Connection dialog box appears.
Type connTest as the connection name.
For the MySQL Server, type localhost.If you are using the MAMP default ports on a Mac, use localhost:8889.
For the User Name, type phptestuser.
Type the password you chose for the phptestuser account in the Password field.
For the Database, type php_test.Note: You don't need to precede the underscore with a backslash here. It was inserted by phpMyAdmin in the previous section (see Figure 20) only because phpMyAdmin uses a query that permits wildcard characters.
Click Test.Dreamweaver attempts to connect to the database. If the connection fails, do the following:
Double-check the server name, user name, and password.
Check the settings for the folder Dreamweaver uses to process dynamic pages (see Specifying a Testing Server for Dreamweaver).
Verify that the web and MySQL servers are both running.
Temporarily disable any firewall or security program. If the connection works, you need to configure the security program to permit communication between Dreamweaver and MySQL.
Click OK. The new connection appears in the Databases panel.
Expand the connTest connection, and then expand the Tables branch. You'll see the comments table in the database, which you can expand to reveal the details of the table columns (see Figure 23).
As far as I can tell I have followed this tutorial to the letter.
As far as I can tell, XAMPP/php mySQL are all running fine, the files are in the correct place and everything should be working. However when I hit test I get a 404 error. (Same error when I hit the select button.)
The suggested problems on the 404 message are:
1. There is no testing server running on the server machine.
Pretty sure the testing server is running. Is there any way to test this, other than to note that xampp is definitely running right now and that I can log into phpMYadmin no problem?
2. The testing server specified for this site does not map to the http://localhost/php_test/_MMServerScripts/MMHTTPDB.php URL Verify that the URL Prefix maps to the root of the site.
Ummm...I'm pretty sure I put things where I was told to put them in the tutorial, but I'm lost at this point where I should verify what. A clue here? The files are where they are supposed to be, but maybe I entered something wrong? Except...I'm not sure what that could be or where to find it. Whatever IT is.
Everything in local files is looking good.
Thanks for your help!
PS: Extra points to anyone who figures out how to make copy/pasteable error messages! These buggers are the bane of my life!

Bgupta, you rock!
I hope you have copied the "mysql.php" and "MMHTTPDB.php" files from "C:\Users\username\AppData\Roaming\Adobe\Dreamweaver CC\locale\Configuration\Connections\Scripts\PHP_MySQL\_mmDBScripts" to "C:\xampp\htdocs\phptest\_mmServerScripts"
This was EXACTLY the problem. I checked the tutorial and I couldn't even find where the tutorial said to do this. (If I missed it, let me know where in the tutorial it was, please.)
Fixed!

How to use a key file in the FTP Task using and SSL connection

In the past I have used this code to set the FTP pass word in an FTP component task in SSIS.
Does anyone know how to use a Key file in an SSL connection to download a file from an FTP site? If not can you tell me where I can get the C# code examples to learn how to create a script task or if there is another way in SSIS to download large files
from an SSL FTP site? Thank you for any help offered.
public void Main()
ConnectionManager FTPConn;
FTPConn = Dts.Connections["FTPServer"];
FTPConn.Properties["ServerPassword"].SetValue(FTPConn, Dts.Variables["FTPPassword"].Value);
Dts.TaskResult = (int)ScriptResults.Success;
Antonio

You can use SFTP for this.
This is a way of implementing SFTP in SSIS using standard tasks
http://visakhm.blogspot.in/2012/12/implementing-dynamic-secure-ftp-process.html
also see
http://blog.goanywheremft.com/2011/10/20/sftp-ftps-secure-ftp-transfers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSL: Connection reset by peer ; Failed to enable crypto error while calling the report using bing API with SOAP client

Hi,
I am trying to fetch report using bing API and making a SOAP call for fetching the data. I get the following error:
[Warning] fopen(): SSL: Connection reset by peer [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
02-04-2015 10:17:41 (BST) : [Warning] fopen(): Failed to enable crypto [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
02-04-2015 10:17:41 (BST) : [Warning] fopen(https://download.api.bingads.microsoft.com/ReportDownload/Download.aspx?q=rzr63XFt5qJduddohoIRyOYAP%2f1%2ftsnhk8L%2bzBmUpdU2CQlcUB98RpY%2bbOaLFFGMqAC4IUUadC%2fNdNnJqeVCY%2f%2bpy6noVsVA%2fMJp47a3Xb1VjABfKhcdKy6vqpgEdcQg%2fQZ7QcEpZ3bEloJjUtGpDquFk53BnkeHEPVWZkDYcsQegRz%2fpG4t4w6gKCCRmhArd6osr6ZU9CMJ3lbxtGXjcQEMPvP2apNyr9P%2fc8niyfWA2aBcm1aEmOLX2KL3aRJ4rz9N7gG7uBslVZH%2b4rUjHdB7CMkbb%2fHyHwvPTqGPbPCHnicefr%2b%2fDP70hlkBEGfyOOswK67%2bl1zh7CyIv%2bcMlaDsuDX1HeFf4uORfD41H1z7):
failed to open stream: operation failed [file] /var/www/sites/psmedia/perfectstormmedia/tools/class/msn_api.class.php [line] 780
Whenever I execute my script. Can you please let me know what we can do to solve this issue. The version of PHP we are using is 5.3.3 with open ssl.

Hi Shobha,
I can't confirm what version of PHP you are using, but to err on the side of caution please use the version specified in the sample/SDK:
PHP 5.4.14 has been installed from PHP.
Here is our code examples:
https://msdn.microsoft.com/en-US/library/bing-ads-overview-getting-started-php-with-web-services.aspx
Thanks,
Itai

I am getting the following error using SQL Plus on Windows "ORA-28865: SSL connection closed"

I have set up my certificates on client and server and have tested the port using TCP and works fine. TCPS fails with ORA-28865. I have attached my trace file which was using level 10
Please any assistance is appreciated
(5888) [11-APR-2015 09:36:28:365] nsnainit: NS Connection version: 315
(5888) [11-APR-2015 09:36:28:365] nsnainit: inf->nsinfflg[0]: 0x41 inf->nsinfflg[1]: 0x41
(5888) [11-APR-2015 09:36:28:365] nsnainit: "or" info flags: 0x41 Translations follow:
native service(s) is (are) wanted
(5888) [11-APR-2015 09:36:28:365] nsnainit: "or" info flags: 0x41 Translations follow:
native service(s) is (are) wanted
"and" info flags: 0x41 Translations follow:
native service(s) is (are) wanted
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsopen: global context check-in (to slot 0) complete
(5888) [11-APR-2015 09:36:28:365] nsopen: lcl[0]=0xf4ffefff, lcl[1]=0x102000, gbl[0]=0xfabf, gbl[1]=0x1, tdu=2097152, sdu=8192
(5888) [11-APR-2015 09:36:28:365] nsfull_opn: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x0
(5888) [11-APR-2015 09:36:28:365] nsfull_opn: nsctx: state=7, flg=0x4001, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsmal: 168 bytes at 0x214d1a0
(5888) [11-APR-2015 09:36:28:365] nsmal: 168 bytes at 0x214dbf0
(5888) [11-APR-2015 09:36:28:365] nsmfr: 239 bytes at 0x20e53a0
(5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=67, *bl=238, *what=8, uflgs=0x0, cflgs=0x3
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsdo: rank=64, nsctxrnk=0
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=14, flg=0x4005, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=8111
(5888) [11-APR-2015 09:36:28:365] nscon: doing connect handshake...
(5888) [11-APR-2015 09:36:28:365] nscon: sending NSPTCN packet
(5888) [11-APR-2015 09:36:28:365] nspsend: plen=70, type=1
(5888) [11-APR-2015 09:36:28:365] ntzwrite: entry
(5888) [11-APR-2015 09:36:28:365] nzos_Write: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: socket 560 had bytes written=99
(5888) [11-APR-2015 09:36:28:365] nttwr: exit
(5888) [11-APR-2015 09:36:28:365] nzos_Write: exit
(5888) [11-APR-2015 09:36:28:365] ntzwrite: exit
(5888) [11-APR-2015 09:36:28:365] nspsend: 70 bytes to transport
(5888) [11-APR-2015 09:36:28:365] nscon: sending 238 bytes connect data
(5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=67, *bl=238, *what=1, uflgs=0x4002, cflgs=0x0
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=2, flg=0x4005, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=431
(5888) [11-APR-2015 09:36:28:365] nsdo: 238 bytes to NS buffer
(5888) [11-APR-2015 09:36:28:365] nsdofls: DATA flags: 0x0
(5888) [11-APR-2015 09:36:28:365] nsdofls: sending NSPTDA packet
(5888) [11-APR-2015 09:36:28:365] nspsend: plen=248, type=6
(5888) [11-APR-2015 09:36:28:365] ntzwrite: entry
(5888) [11-APR-2015 09:36:28:365] nzos_Write: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: entry
(5888) [11-APR-2015 09:36:28:365] nttwr: socket 560 had bytes written=277
(5888) [11-APR-2015 09:36:28:365] nttwr: exit
(5888) [11-APR-2015 09:36:28:365] nzos_Write: exit
(5888) [11-APR-2015 09:36:28:365] ntzwrite: exit
(5888) [11-APR-2015 09:36:28:365] nspsend: 248 bytes to transport
(5888) [11-APR-2015 09:36:28:365] nsdoacts: flushing transport
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: entry
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: Command = 4
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: unknown command 4 - calling underlying protocol adapter
(5888) [11-APR-2015 09:36:28:365] nttctl: entry
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: operation is unsupported
(5888) [11-APR-2015 09:36:28:365] ntzcontrol: exit
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctxrnk=0
(5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=68, *bl=2048, *what=9, uflgs=0x0, cflgs=0x3
(5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:365] nsdo: rank=64, nsctxrnk=0
(5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=2, flg=0x4005, mvd=0
(5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=8111
(5888) [11-APR-2015 09:36:28:380] nscon: recving a packet
(5888) [11-APR-2015 09:36:28:380] nsprecv: reading from transport...
(5888) [11-APR-2015 09:36:28:380] ntzread: entry
(5888) [11-APR-2015 09:36:28:380] ntznzosread: entry
(5888) [11-APR-2015 09:36:28:380] nzos_Read: entry
(5888) [11-APR-2015 09:36:28:380] nttrd: entry
(5888) [11-APR-2015 09:36:28:380] ntt2err: entry
(5888) [11-APR-2015 09:36:28:380] ntt2err: exit
(5888) [11-APR-2015 09:36:28:380] nttrd: socket 560 had bytes read=0
(5888) [11-APR-2015 09:36:28:380] nttrd: exit
(5888) [11-APR-2015 09:36:28:380] nzos_Read: exit
(5888) [11-APR-2015 09:36:28:380] ntznzosread: encountered "wouldblock" error
(5888) [11-APR-2015 09:36:28:380] ntctst: size of NTTEST list is 1 - not calling poll
(5888) [11-APR-2015 09:36:28:396] nzos_Read: entry
(5888) [11-APR-2015 09:36:28:396] nttrd: entry
(5888) [11-APR-2015 09:36:28:396] nttrd: exit
(5888) [11-APR-2015 09:36:28:396] ntt2err: entry
(5888) [11-APR-2015 09:36:28:396] ntt2err: Read unexpected EOF ERROR on 560
(5888) [11-APR-2015 09:36:28:396] ntt2err: exit
(5888) [11-APR-2015 09:36:28:396] nzos_Read: exit
(5888) [11-APR-2015 09:36:28:396] ntznzosread: SSL connection closed gracefully.
(5888) [11-APR-2015 09:36:28:396] ntznzosread: SSL connection terminated normally.
(5888) [11-APR-2015 09:36:28:396] ntznzosread: returning NZ error 28865 in result structure
(5888) [11-APR-2015 09:36:28:396] ntznzosread: exit
(5888) [11-APR-2015 09:36:28:396] nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=28865, ora[1]=0, ora[2]=0
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsdo: nsctxrnk=0
(5888) [11-APR-2015 09:36:28:396] nscall: unexpected response
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: entry
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: exit
(5888) [11-APR-2015 09:36:28:396] nstimarmed: no timer allocated
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: entry
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: Command = 14
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: exit
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: entry
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: Command = 15
(5888) [11-APR-2015 09:36:28:396] ntzcontrol: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsfull_cls: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x440
(5888) [11-APR-2015 09:36:28:396] nsfull_cls: nsctx: state=1, flg=0x4001, mvd=0
(5888) [11-APR-2015 09:36:28:396] nsclose: closing transport
(5888) [11-APR-2015 09:36:28:396] ntzdisconnect: entry
(5888) [11-APR-2015 09:36:28:396] ntzFreeNTZData: entry
(5888) [11-APR-2015 09:36:28:396] nzos_DestroyCtx: entry
(5888) [11-APR-2015 09:36:28:396] nzos_DestroyCtx: exit
(5888) [11-APR-2015 09:36:28:396] ntzFreeNTZData: exit
(5888) [11-APR-2015 09:36:28:396] nttdisc: entry
(5888) [11-APR-2015 09:36:28:396] nttdisc: Closed socket 560
(5888) [11-APR-2015 09:36:28:396] nttdisc: exit
(5888) [11-APR-2015 09:36:28:396] ntzdisconnect: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsclose: global context check-out (from slot 0) complete
(5888) [11-APR-2015 09:36:28:396] nadisc: entry
(5888) [11-APR-2015 09:36:28:396] nacomtm: entry
(5888) [11-APR-2015 09:36:28:396] nacompd: entry
(5888) [11-APR-2015 09:36:28:396] nacompd: exit
(5888) [11-APR-2015 09:36:28:396] nacompd: entry
(5888) [11-APR-2015 09:36:28:396] nacompd: exit
(5888) [11-APR-2015 09:36:28:396] nacomtm: exit
(5888) [11-APR-2015 09:36:28:396] nas_dis: entry
(5888) [11-APR-2015 09:36:28:396] nas_dis: exit
(5888) [11-APR-2015 09:36:28:396] nau_dis: entry
(5888) [11-APR-2015 09:36:28:396] nau_dis: exit
(5888) [11-APR-2015 09:36:28:396] naeetrm: entry
(5888) [11-APR-2015 09:36:28:396] naeetrm: exit
(5888) [11-APR-2015 09:36:28:396] naectrm: entry
(5888) [11-APR-2015 09:36:28:396] naectrm: exit
(5888) [11-APR-2015 09:36:28:396] nagbltrm: entry
(5888) [11-APR-2015 09:36:28:396] nau_gtm: entry
(5888) [11-APR-2015 09:36:28:396] nau_gtm: exit
(5888) [11-APR-2015 09:36:28:396] nagbltrm: exit
(5888) [11-APR-2015 09:36:28:396] nadisc: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: entry
(5888) [11-APR-2015 09:36:28:396] nsvntx_dei: exit
(5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
(5888) [11-APR-2015 09:36:28:396] nsmfr: 2944 bytes at 0x2152400
(5888) [11-APR-2015 09:36:28:396] nsmfr: 1880 bytes at 0x2151ca0
(5888) [11-APR-2015 09:36:28:396] nscall: connecting...
(5888) [11-APR-2015 09:36:28:396] nladget: entry
(5888) [11-APR-2015 09:36:28:396] nladget: exit
(5888) [11-APR-2015 09:36:28:396] nsmfr: 238 bytes at 0x221def0
(5888) [11-APR-2015 09:36:28:412] nsmfr: 304 bytes at 0x20d8200
(5888) [11-APR-2015 09:36:28:412] nladtrm: entry
(5888) [11-APR-2015 09:36:28:412] nladtrm: exit
(5888) [11-APR-2015 09:36:28:412] nioqper: error from nscall
(5888) [11-APR-2015 09:36:28:412] nioqper:    ns main err code: 12537
(5888) [11-APR-2015 09:36:28:412] nioqper:    ns (2) err code: 12560
(5888) [11-APR-2015 09:36:28:412] nioqper:    nt main err code: 507
(5888) [11-APR-2015 09:36:28:412] nioqper:    nt (2) err code: 0
(5888) [11-APR-2015 09:36:28:412] nioqper:    nt OS   err code: 0
(5888) [11-APR-2015 09:36:28:412] niomapnserror: entry
(5888) [11-APR-2015 09:36:28:412] niqme: entry
(5888) [11-APR-2015 09:36:28:412] niqme: reporting ORA-28865 error
(5888) [11-APR-2015 09:36:28:412] niqme: exit
(5888) [11-APR-2015 09:36:28:412] niomapnserror: exit
(5888) [11-APR-2015 09:36:28:412] niotns: Couldn't connect, returning 28865
(5888) [11-APR-2015 09:36:28:412] niotns: exit
(5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214d1a0, data at 0x2225ca0.
(5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214dbf0, data at 0x2227d90.
(5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214d9e0, data at 0x21531c0.
(5888) [11-APR-2015 09:36:28:412] nigtrm: Count in the NI global area is now 1
(5888) [11-APR-2015 09:36:28:412] nigtrm: Count in the NL global area is now 1

CLIENT SQLNET.ORA
TRACE_LEVEL_CLIENT = 10
TRACE_UNIQUE_CLIENT = ON
TRACE_DIRECTORY_CLIENT = C:\Oracle\app\client\product\12.1.0\client_1\network\trace
TRACE_FILE_CLIENT = sqlnet_client.trc
LOG_FILE_CLIENT = sqlnet_client.log
LOG_DIRECTORY_CLIENT = C:\Oracle\app\client\product\12.1.0\client_1\network\log
DIAG_ADR_ENABLED = OFF
TRACE_TIMESTAMP_CLIENT = ON
SQLNET.AUTHENTICATION_SERVICES = (ALL)
SQLNET.AUTHENTICATION_REQUIRED = FALSE
SSL_CLIENT_AUTHENTICATION = FALSE
WALLET_LOCATION =
(SOURCE =
    (METHOD = FILE)
    (METHOD_DATA =
      (DIRECTORY = C:\Oracle\app\client\product\12.1.0\client_1\network\wallets)
ADR_BASE = C:\Oracle\app\client\product\12.1.0\client_1\log
SERVER SQLNET.ORA
SQLNET.AUTHENTICATION_SERVICES= (ALL)
SSL_VERSION = 0
SSL_CLIENT_AUTHENTICATION = FALSE
TRACE_UNIQUE_SERVER = ON
TRACE_DIRECTORY_SERVER = /u01/app/grid/product/12.1.0/12.1.0.2/network/trace
TRACE_FILE_SERVER = sqlnet_server.trc
LOG_FILE_SERVER = sqlnet_server.log
WALLET_LOCATION =
(SOURCE =
    (METHOD = FILE)
    (METHOD_DATA =
      (DIRECTORY = /u01/app/grid/product/12.1.0/12.1.0.2/owm/wallets/grid)
LOG_DIRECTORY_SERVER = /u01/app/grid/product/12.1.0/12.1.0.2/network/log
SQLNET.AUTHENTICATION_REQUIRED = FALSE
DIAG_ADR_ENABLED = OFF
TRACE_TIMESTAMP_SERVER = ON

I can't connect to MySQL database from The JSP Standard Tag Library

Hi All !
I have a problem, please help me anybody !
I don't connect to MySQL database from jsp page using JSTL tag but from servlet all work correctly. I set my path and put �mysql-connector-java-3.1.13-bin.jar� in ENVIRONMENT WinXP(classpath=C:\Java\jdk1.5.0_10\jre\lib\ext\mysql-connector-java-3.1.13-bin.jar) and in War project folder �WEB-INF/lib� and in [TomcatServer]\common\lib.
I have in folder�WEB-INF/lib� following files:
antlr.jar
commons-beanutils.jar
commons-collections.jar
commons-digester.jar
commons-fileupload.jar
commons-logging.jar
commons-validator.jar
jakarta-oro.jar
jsf-api.jar
jsf-impl.jar
jstl.jar
mysql-connector-java-3.1.13-bin.jar
standard.jar
struts.jar
I'm using:
NetBeans 5.5 Build200610171010 (bundled Tomcat 5.5.17)
Ent.Pack 20061020 Visual Wb Pack 061103
OS WinXP SP2
Java 1.5.0_10
MySQL 5.0.18-nt
1:<%@page contentType="text/html"%>
2:<%@page pageEncoding="UTF-8"%>
8: <%@taglib uri="http://java.sun.com/jsp/jstl/core" prefix="c"%>
9: <%@taglib uri="http://java.sun.com/jstl/sql" prefix="sql"%>
10:
11: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
12: "http://www.w3.org/TR/html4/loose.dtd">
13:
14: <sql:setDataSource var="ds"
15: driver="com.mysql.jdbc.Driver"
16: url="jdbc:mysql://localhost:3306/test"
17: user="root"
18: password="xxxx"/>
19:
20:
21:<sql:query sql="select name, age from People" var="res"
22: dataSource="${ds}"/>
I have received report on mistake when entered code at the top:
�/index.jsp [21;0] According to TLD or attribute directive in tag file, attribute dataSource does not accept any expressions�
I used instead of (dataSource="${ds}")->(dataSource="ds") but this did not work.
After build and run I have received
=========================================START=================================
HTTP Status 500
type Exception report:
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: /index.jsp(21,0) According to TLD or attribute directive in tag file, attribute dataSource does not accept any expressions
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:375)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
root cause
org.apache.jasper.JasperException: /index.jsp(21,0) According to TLD or attribute directive in tag file, attribute dataSource does not accept any expressions
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:146)
org.apache.jasper.compiler.Validator$ValidateVisitor.checkXmlAttributes(Validator.java:955)
org.apache.jasper.compiler.Validator$ValidateVisitor.visit(Validator.java:710)
org.apache.jasper.compiler.Node$CustomTag.accept(Node.java:1441)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
org.apache.jasper.compiler.Node$Visitor.visitBody(Node.java:2213)
org.apache.jasper.compiler.Node$Visitor.visit(Node.java:2219)
org.apache.jasper.compiler.Node$Root.accept(Node.java:456)
org.apache.jasper.compiler.Node$Nodes.visit(Node.java:2163)
org.apache.jasper.compiler.Validator.validate(Validator.java:1489)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:166)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:276)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:264)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:563)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:303)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
Apache Tomcat/5.5.17
=======================================END================================
Error: "According to TLD or attribute directive in tag file, attribute dataSource does not accept any expressions" - but according to documentation such parameter possible.
BUT WHEN JOINING With DATABASE FROM SERVLET ALL WORK FINE.
I read this doc - [http://tomcat.apache.org/tomcat-5.5-doc/jndi-datasource-examples-howto.html], this applicable if I Tomcat Admin, but i'am not Admin
I simply user, i.e. I want to place its database on virtual host (Tomcat+(JSP-JSTL)+MySQL).
There is idea how can resolve this problem
Thank you in advance ;)

For all how have similar problem.
Decision instead of these ways
<%@ taglib prefix="c" uri="http://java.sun.com/jstl/core" %>
<%@ taglib prefix="sql" uri="http://java.sun.com/jstl/sql" %>
it is necessary to indicate these
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>

How can I connect to MySQL external database

Hello.
I have a SAP system running in SQL Server 2003.
I need to connect to external MySQL DB., to operate with this information in ABAP program.
I have done the step necesary... I mean I go to DBCO transaction and configure the connection like this:
DB CONNECTION --> AFIS
DBMS --> MSS
user name --> xxxxxx
DBpass -->xxxxxx / xxxxxx
Conn Info -->MSSQL_SERVER=192.168.1.233 MSSQL_DBNAME=alliance OBJECT_SOURCE=alliance
I do a test program, when I do the statement CONNECT TO, sy-subrc 0 and connection = DEFAULT... I mean, with this form I cannot connect to MySQL Database...
Can you help me to do this?? I think the problem it's the connection string in DBCO... but I'm not sure...,
Would be possible to connect by MySQL ODBC??? I mean , installing the ODBC driver in my SAP server, and using this in ABAP Program??
Thks.
DATA: BEGIN OF wa,
cod_modelo(20),
END OF wa.
DATA: dbs TYPE dbcon-con_name.
DATA: con(20) TYPE c.
DATA : ls_wa LIKE wa.
con = 'AFIS'. "DB Connection in DBCO above
EXEC SQL.
CONNECT TO :con
ENDEXEC.
WRITE sy-subrc. ---> The result it's 4
EXEC SQL.
GET CONNECTION :con
ENDEXEC.
WRITE : con. --> The result it's DEFAULT
EXEC SQL.
SET CONNECTION DEFAULT
ENDEXEC.
write : con. --> The result it's DEFAULT

> It's for it, that when I go to DBCO... in DBMS ---... I can select Oracle, MSSQLServer, DB2... for this Databases..., exists the library (lib_dbsl)???
yes, for all those databases exists the database interface library.
> In resume:
> IT'S NOT POSSIBLE CONNECT TO MYSQL!!! ... I cannot believe it!!!...
Well - as far as I remember there were some times ago efforts to port SAP applications to MySQL. That would explain why there's also a file "DDLMYS.TPL" created if you execute R3ldctl during a system copy - amongst DDL files for all other databases. I believe this was at the time MySQL was promoting SAPDB/MaxDB.
MySQL is historically not a database engine for software, that requires transactional integrity; there were extensions to support that (InnoDB or others) and there was no customer demand in getting MySQL as engine for SAP applications. And only develop an interface to be able to connect to an external MySQL engine is not worth the effort.
However, there is hope Some BusinessObjects applications also run with and against MySQL engines, depending on how the strategy to integrate those into the SAP software stack there may (or may not) be an interface for that database in the future.
Markus

FTP/SSL Connection Problem for FTP Receiver Adapter

Hello All,
We are trying to establish an FTPS/SSL connection with one of our customers from our XI(Unix) system, and are receive following error:
iaik.security.ssl.SSLException: Server certificate rejected by ChainVerifier
Communication Channel Parameters:
Connection Security: FTP (FTP Using SSL/TLS) for Control Connection or FTP (FTP Using SSL/TLS) for Control Connection and Data Connection
Command Order: AUTH TLS, USER, PASS, PBSZ, PROT
Checkbox - Use X.509 Certificate.... checked (Certificate was provided by third party (customer issued) and uploaded to service_ssl certificate store on J2EE server)
Data Connection: Passive
Port: 10021
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
Note: Initial handshaking occurs but connection is being dropped by the third party FTP Server when SSL certificate credentials are being validated. We also tried connecting to the third party FTPS server using standard FTPS client(FileZilla software), this connection gets established successfully with no certificate issues which means certificate and third party FTP Server is functioning correctly.
We therefore are thinking that the problem lies with our XI system being unable to load the certificate information correctly at the point when FTPS session is being established.
Your help and suggestions will be greatly appreciated.
Thanks and Best Regards
Prashant Rajani

Hello All,
Further in order to test connection set up and communication channel configuration we tried simulating the FTP connection locally by configuring FTP Server using FileZilla at a local machine and accessed it from Client's XI Server.
This set up simulates the problem we encounter with our customer's FTP Server.
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection", we receive error "Certificate rejected by Chain Verifier". The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
This is what the FTP (FileZilla) sees when the XI system attempts to set-up a fully encrypted data (FTPS) connection i.e., connection security parameter value as"FTPs( FTP Using SSL/TLS) with Control and Data Connection" :-
- (not logged in) (10.18.106.34)> Connected, sending welcome message...
- (not logged in) (10.18.106.34)> 220-FileZilla Server version 0.9.18 beta
- (not logged in) (10.18.106.34)> 220-written by Tim Kosse ([email protected])
- (not logged in) (10.18.106.34)> 220 Please visit http://sourceforge.net/projects/filezilla/
- (not logged in) (10.18.106.34)> AUTH TLS
- (not logged in) (10.18.106.34)> 234 Using authentication type TLS
- (not logged in) (10.18.106.34)> SSL connection established
- (not logged in) (10.18.106.34)> USER test
- (not logged in) (10.18.106.34)> 331 Password required for test
- (not logged in) (10.18.106.34)> PASS ***********
- test (10.18.106.34)> 230 Logged on
- test (10.18.106.34)> PBSZ 0
- test (10.18.106.34)> 200 PBSZ=0
- test (10.18.106.34)> PROT P
- test (10.18.106.34)> 200 Protection level set to P
- test (10.18.106.34)> SYST
- test (10.18.106.34)> 215 UNIX emulated by FileZilla
- test (10.18.106.34)> PWD
- test (10.18.106.34)> 257 "/" is current directory.
- test (10.18.106.34)> CWD /payment/
- test (10.18.106.34)> 250 CWD successful. "/payment" is current directory.- test (10.18.106.34)> TYPE I
- test (10.18.106.34)> 200 Type set to I
- test (10.18.106.34)> PASV
- test (10.18.106.34)> 227 Entering Passive Mode (10,27,7,103,15,63)- test (10.18.106.34)> STOR BHPDSB20060911-153840-834.txt
- test (10.18.106.34)> 150 Connection accepted
- test (10.18.106.34)> Data connection SSL warning: SSL3 alert read: fatal: bad certificate
- test (10.18.106.34)> Data connection SSL warning: SSL_accept: failed in SSLv3 read client certificate A- test (10.18.106.34)> Data connection SSL warning: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate- test (10.18.106.34)> Data connection SSL warning: error:140940E5:SSL routines:SSL3_READ_BYTES:ssl handshake failure- test (10.18.106.34)> 426 Connection closed; transfer aborted.- test (10.18.106.34)> QUIT
- test (10.18.106.34)> 221 Goodbye
- test (10.18.106.34)> SSL connection established
Please suggest your valuable inputs if we are missing out something. Any helpful inputs in this regard is highly appreciated.
Thanks and Best Regards
Prashant

Connection error mysql database in Dreamweaver

the error message is - HTTP error code 404 file not found. here are some possible reasons
screen shot - http://netwizlk.site50.net/images/DW-error.jpg
1)there is no testing server running on the server machine.
2)the testing server specified for this site does not map to the http://localhost/_mmServerScripts/MMhTTPDB.php verify that the URL prefix maps to the root of the site.
guy pls help me to solve this problem. I tried several times to connect my mysql database with dreamweaver but ended up having this error I reinstalled dreamweaver cs4 and XAMPP still the error is not rectified my both remote and local files are stored in XAMPP server location called in c:\xampp\htdocs\htdocs\myweb
anybody who could give me a speedy solution for this issue will be highly appreciated thanks alot guys.

c:\xampp\htdocs\htdocs\myweb
MM serverscripts must be at the root level of the virtual server, that is directly in the htdocs folder.
Mylenium

Connecting a MYSQL database in Dreamweaver

Hi All,
I'm tryting to connect a mysql database based locally and am getting the error:
HTTP Error Code 404 File Not Found. Here are some possible reasons for the problem:
1) There is no testing server running on the server machine.
2) The testing server specified for this site does not map to the http://localhost/_mmServerScripts/MMHTTPDB.php. Verify that
the URL Prefix maps to the root of the site.
What does this mean?
How do I start the testing server? I'm unable to locate the folder where the database files are stored as the database has been created locally on my machine. Everything hace been created locally so I know that point 2) could well be irrelavant.
Please can somebody help?
Many Thanks
Gordon

The functions for connecting to a database were mostly deprecated. But if you enable them in CS6 Cloud/CC then they will be the same.

Error when connecting to MySQL Database

I am trying to connect to MySQL and receive an error everytime. I have attempted to talk to Bluehost (who my site is hosted thru) and they said it is not on their end and not something they can help me with. I set up a new MySQL Database with Bluehost and then set up the site through DW and everything went fine. I secured an ftp connection and went on to connect to MySQL. When I enter in my credentials for SQL Database, it returns:
HTTP Error Code 404:
Reason 1. No testing server running on the server machine.
Reason 2. Testing server specified for this site deos not map to the http://my_domain.com/_mmServerScripts/MMHTPDB.php URL. Verify the URL Prefix maps to the site.
The testing server model I am using is set to PHP MySQL and URL Prefix I am using (my_domain.com) is my website URL. I watched a YouTube video someone suggested elsewhere on how to add MMHTTPDB.php and mysql.php files to _mmServerScripts folder since the folder is empty but unfortunately, those files are not found on my computer. I assume they were supposed to be installed when I installed DW, but they are not here. I have done a general search of the comp and looked in each folder that was installed with DW and sadly, no files that match those names. What can I do? How can I make an SQL connection? Please help. It is greatly appreciated.
-Sharon

Your answer can be found somewhere in here http://forum.wampserver.com/read.php?2,83382,88694
My hosts file (c:\windows\system32\drivers\etc\hosts) looks like
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
#      102.54.94.97     rhino.acme.com          # source server
#       38.25.63.10     x.acme.com              # x client host
# localhost name resolution is handled within DNS itself.
    127.0.0.1       localhost
    ::1             localhost

SSL connections to MySQL

Similar Messages

Maybe you are looking for