SSL connectivity for IBM WebSphere MQ to integrate with XI

Any information of SSL connectivity for IBM WebSphere MQ to integrate with XI???

Ravi,
Have you gone thru this SAP Note - 912314 - SSL support for IBM Websphere MQ/ MQ Series
raj.
[Give Support|http://www.sapfeedingknowledge.com/show_your_support|I'm Working here for Global cause]

Similar Messages

Policy Agent 2.1 for IBM WebSphere Application Server 5.0 can't install

I install Policy Agent 2.1 for IBM WebSphere Application Server 5.0
But Can't install success
resone:
Base Installation completed Successfully
WebSphere 5.0 Agent ClassPath : C:/Sun/IdentityServer/j2ee_agents/lib/am_sdk.jar;C:/Sun/IdentityServer/j2ee_agents/lib/am_services.jar;C:/Sun/IdentityServer/j2ee_agents/lib/am_sso_provider.jar;C:/Sun/IdentityServer/j2ee_agents/lib/am_logging.jar;C:/Sun/IdentityServer/j2ee_agents/config/F__Program Files_WebSphere_AppServer_config_cells_tmbsp103_nodes_tmbsp103_servers_server1;C:/Sun/IdentityServer/j2ee_agents/locale
WebSphere 5.0 Agent Boot ClassPath : C:/Sun/IdentityServer/j2ee_agents/lib/jdk_logging.jar
WebSphere 5.0 Agent JVM options : -Damconfig=AMAgent -Dmax_conn_pool=10 -Dmin_conn_pool=1 -Dcom.iplanet.coreservices.configpath=C:/Sun/IdentityServer/j2ee_agents/config/F__Program Files_WebSphere_AppServer_config_cells_tmbsp103_nodes_tmbsp103_servers_server1/ums -Djava.util.logging.manager=com.sun.identity.log.LogManager -Djava.util.logging.config.file=C:/Sun/IdentityServer/j2ee_agents/config/F__Program Files_WebSphere_AppServer_config_cells_tmbsp103_nodes_tmbsp103_servers_server1/AMAgent.properties -Djava.protocol.handler.pkgs=com.ibm.net.ssl.internal.www.protocol -Dws.ext.dirs=C:/Sun/IdentityServer/j2ee_agents/lib
The server.policy file was configured successfully.
Global Security Settings Configured Successfully.
sas.client.props file Configuration FAILED.
soap.client.props file Configuration FAILED.
sas.client.props /soap.client.props two file how to Configuration ??

From your description, since the agent installs file with a different JRE, I would suspect it has something to do with the availability of JCE provider in the first JRE. By default, WebSphere's JRE is equipped with IBM JCE provider which is what the agent uses to encrypt the necessary
information. If this provider is not configured correctly it could result in the error that you are seeing. Please check the WebSphere installation and make sure that the JRE used by it has the necessary IBM JCE provider configured. The java.security file for this should contain something like:
security.provider.1=sun.security.provider.Sun
security.provider.2=com.ibm.crypto.provider.IBMJCE
security.provider.3=com.ibm.jsse.IBMJSSEProvider
security.provider.4=com.ibm.security.cert.IBMCertPath
security.provider.5=com.ibm.crypto.pkcs11.provider.IBMPKCS11
Also, make sure that when you are installing the agent you specify the Java Home as prompted by the agent to point to the location where this JRE is installed. Typically this is under WebSphere/AppServer/java directory. HTH, Jerry

Business Objects Integration Kit For IBM WebSphere

Dear Gurus
I am kinda new to Business Objects but I want to as whether there are any known limitations in the BO integration kit for IBM webSphere. your help is much valuable

Hi,
this forum is for the SAP Integration Kit. I would suggest you post your questions into the corresponding product forum from BusinessObjects.
Ingo

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

I am looking for a CRM system that integrates with mail chimp or constant contact, hoot suite and forms stack

Hi,
I could resolve the issue since there were lot of issues after system copy.
1. During distribued to Cenrtal system - system copy.
You need to combine both DB and CI export copies in one folder during which one thing can happen.
SOURCE.PROPERTIES - this file will be there in DB export JAVA folder and also CI export JAVA folder where
DB SOURCE.PROPERTIES file doesn't have an entry of "src.ci.host". This will stop the SAPINST with error and after modifying the file "SOURCE.PROPERTIES" Traget System Copy finishes without any issue.
Then after this stage I encountered an issue with bind hosts entry in config tool which was due to virtual host name usage in my HACMP setup due to whcih JAVA gives a startup problem.
I eliminated this issue also.
After JAVA started I faced an issue with XI related navigations.
ecchangeProfile url still had an entry of Production System. This may be a bug.
After changing that entry, exchangeProfile was downloaded but it had all the source system host entries which were manually changed.
Now I can access all the XI related navigations.
I need to also perfrom SGEN and Profiles import.
Do I need to change any additional settings after this so that my production and DR can work without any issue?
Do you have any additional checks which I can perfrom to ensure my DR systems consistency before I start the log shipping from Production?
Regards,
Rajkumar

How to create db connection in IBM WebSphere IDE

Hi,
I am using IBM WebSpher 5.1.1. And i want to create a back end using ms-access. Can any one suggest me how to create the connection.
While i used
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
i am getting class not found. So i assumed that IBM doesnt provided such driver in the IDE.
So can any one tell me the alternative to make a back end connection for Ms Access.
Thanks,
Girish.K

Hi,
I have just nw, got it succeeded.
I just granted
SQL> grant sysdba to sri;
After that I am able to create connection with role 'sysdba'. Hope this post would be useful for someone who tries.
Thanks for your reply.
Regards,
Sabarisri. N
Edited by: Sabarisri Nagalingam on May 6, 2011 2:42 PM

Design Plan For IBM WebSphere MQ

Hi,
I am trying to monitor a queue within IBM Websphere MQ using Oracle BAM.The configuration parameters of Enterprise Message Source looks like the following:
Type: IBM WebSphere MQ
Initial Context Factory: com.sun.jndi.fscontext.RefFSContextFactory.
JNDI Service Provider URL: file:/C:/JNDI.
TopicConnectionFactory Name: MQAPPDEV01.
Topic Name: MQTEST.2.ESB.LQ.
JMS Message Type: TextMessage.
Durable Subscriber Name (Optional):
Message Selector (Optional):
Client ID (Optional): esbsrv
I get the following error in Enterprise Link.The Plan has two nodes :Oracle BAM Enterprise Message Receiver->Grid
IMessageSourceReceiver->messageReceive: java.lang.ClassCastException
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
IMessageSourceReceiver->messageReceive: java.lang.ClassCastException
     at iteration.enterpriselink.sources.JMSConsumer.start(JMSConsumer.java:85)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.jmsConsumerStart(JMSMessageSourceReceiverImpl.java:1001)
     at iteration.enterpriselink.sources.JMSMessageSourceReceiverImpl.messageReceive(JMSMessageSourceReceiverImpl.java:326)
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3A]
Error during Message Receive operation.
[Oracle BAM Enterprise Link error code: 0x75 -- 0x1, 0x75 -- 0x3B]
Error while processing the data for the step 'Oracle BAM Enterprise Message Receiver'
[Oracle BAM Enterprise Link error code: DC -- 0x1, DC -- 0x83]
Update of Plan "Untitled, created 10/2/2008 11:11:03 AM" failed.
[Oracle BAM Enterprise Link error code: PlanMgr -- 0x1, PlanMgr -- 0xD5]
I tried changing the JMS Message Type to MapMessage.But No luck.
Can anyone give me directions to resolve this issue or if there is some document i should be referring to.I am not looking for publish/subscribe design.This is strictly point to point.
Thankyou,
Suchith

It may be worth setting up a little java test program to try out your settings and see if you can recreate the problem in an environment where you have more control.
Are you sure that the messages are TextMessages?

Report links in Crystal Reports portlet for IBM Websphere 6.0

Hi,
We have some problem when we try to use BusinessObjects XI Release 2 Java Portal Integration Kit for WebSphere (http://ftp1.businessobjects.com/outgoing/products/pik/BusinessObjectsPortlets.zip), that was downloaded from http://www.businessobjects.com/products/downloadcenter/boepik.asp.
This portlet configured for work with Crystal Reports Server XI Release 2 Service Pack 2.
The portal server that we use is IBM WebSphere Portal Server 6.0.
In Portlet interface we can see list of reports on Crystal Reports server, but links for this reports lead us from browser window direct to Crystal Reports Server without Portal links rewriting. It is problem because we have access to Crystal Reports Server only from Portal Server computer. It is not accessible from users computers due to security reasons and network restrictions. Coud you help us and provide some advices how to configure this portlet in way to show reports through Portal?
Thanks in advance,
Best Regards
B.M.

Here is a list of all the communication types available. You must enter them as a comma seperated list. I personally hard code them in the WEB-INF/portlet.xml and then redeply the BOportlet.war file. If you don't want to do that, you should be able to add them by logging in to the Webspere Portal admin interface.
Portlet Management>Portlets>Document List>Configure Portlet>Page 2 edit the Communication Types.
CrystalReport, Analysis, Webi, Word, Excel, Powerpoint, Pdf, Txt, Rtf, MyInfoView, AFDashboardPage, Analytic, FullClient
I am also attaching a snippet of my portlet.xml where I added the comunication types in there.
Once these are added, when you run/view a report in the document list portlet, the report will open in the document view portlet.
Let me know if this helps.
--Jack
<portlet-info>
      <title>Document List</title>
    </portlet-info>
    <portlet-preferences>
      <preference>
        <name>Communication Types</name>
    <value>Analysis,Analytic,CrystalReport,FullClient,Excel,MyInfoView,Pdf,Powerpoint,Rtf,Txt,Webi</value>
        <read-only>false</read-only>
      </preference>
      <preference>
        <name>Communication Keyword</name>
        <value>BOPortletCommunicationId</value>
        <read-only>false</read-only>
      </preference>

IBM websphere 6.1 integration with OAM

Hi,
1) Is the "interceptorClassName" Clases Name important? can i name it as other thing rather than what is stated in the documentation?
example:
According to the WAS integtraion guide the Interceptor classname is as: com.oblix.tai.was5.WebGate2TrustAssociationInterceptor
Can i change it to com.oblix.tai.was5.WebGateTrustAssociationInterceptor
2) Is there anywhere to verify that TAI is loaded properly and how do i test it?
================================================================================
Interceptor classname is under WAS, Secure administration -> applications, and infrastructure -> Trust association -> Interceptors
Thanks and Regards,
Grey

Thanks! i got the figure out. but i encouter something else while integrating with WAS
im trying to integrate OAM with WAS without reverse proxy and i followed the documentation religiously. in the documentation
Defining an Oracle Access Manager Policy Domain for WebSphere without Reverse Proxy_
Without reverse proxy, disabling SSO in WAS is required. I will need to protect the WebSphere Administrative Console SSL URL. Otherwise, I will not be able to access the console after disabling SSO in WAS. I have create the policy domain as the documentation.
■ Resource Type: http
■ Host Identifier: xxx
■ URL Prefix: _/ibm/console; and /admin_
■ Description: Used by NetPointWASRegistry TAI component.
Authorization Rules: Click the Authorization Rules tab, click Add, and then create and save an authorization rule to allow access to WebSphere Administrative
Console resources. For example:
a. Click General, then enter and save:
* Name: Allow Administrator.
* Description: Allow access to WebSphere Administrative Console resources.
* Enabled: Yes
* Allow takes Precedence: Yes
Without Reverse Proxy: Click Actions, then enter and save the following WebSphere Administrative Console SSL URL for Authentication Success. For example:
Redirect to: https://hostname:port/ibm/console *<- i found out that once I had this implemented. I will be going in an authentication cycle (keep getting authenticated and redirected back to the same page) because it is part of the resources I had it declare previously to be protected.*
Is there a work around or is it due to documentation error?

XI to IBM Websphere Default JMS Provider with JNDI

Hello everybody!
We face a problem with connecting SAP XI to IBM WebSphere Default JMS Provider (need to send a message from XI to WebSphere JMS and receive the response).
We have the following versions installed:
    SAP XI: 7.0 SP8 , Sun JDK 1.4.2
    IBM WebSphere: IBM WebSphere Application Server ND, 6.0.2.17, J2RE 1.4.2 IBM
We cannot set the JMS adapter of SAP XI for conecting with IBM WebSphere Default JMS Provider. The Communication Channel has erroneous state (at runtime) and the Communication Channel Monitoring tool displays the error message as described below (under "Variant 1" and "Variant 2" sub-headings) depending on the settings performed.
For connecting, the following JMS-provider settings were used at IBM WebSphere side:
   JMS Providers: Default Messaging Provider
   Queue Connection Factories: name:QueueConnectionFactory, jndi:jms/QueueConnectionFactory, provider: Default Messaging Provider
   Queues: name Queue, jndi: jms/Queue, provider: Default Messaging Provider
The XI communication channel (and associated JMS-adapter) was set as Variants 1 and 2 show. Settings for both cases and received error messages were the following:
<b>Variant 1.</b>
    Adapter type: JMS
    Type: Receiver
    JMS Provider: Access JMS Provider with JNDI (Java Naming and Directory Interface)
    JNDI Lookup Name of QueueConnectionFactory: jms/QueueConnectionFactory
    JNDI Lookup Name of JMS Queue: jms/Queue
    Name of JNDI Initial Context Factory: com.sap.engine.services.jndi.InitialContextFactoryImpl
    JNDI Server Address: iiop://WEBSPHERE.HOST:2809/
    As the result, the Communication Channel Monitoring displays that the channel has erroneous state and the following error message is written:
    "Error during channel initialization; exception trace: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of jms/QueueConnectionFactory.
at com.sap.engine.services.jndi.implserver.ServerContextImpl.lookup(ServerContextImpl.java:649)"
<b>Variant 2</b>
    The same settings as in Variant 1 above, were used and additionally the following settings were done:
    - Name of JNDI Initial Context Factory: com.ibm.websphere.naming.WsnInitialContextFactory
    - The archive aii_af_jmsproviderlib.sda containing libraries required by WsInitialContextFactory, was deployed to the SAP WebAS where the XI is running. Those libraries were taken from WebSphere Application Server Pluggable Application Client installation package (described in the article "WebSphere Application Server Pluggable Application Client" located at http://www-128.ibm.com/developerworks/websphere/library/techarticles/0409_bhogal/0409_bhogal.html)
    - Also, as it is recommended in the referred article, the files required by IBM's iiop protocol (ibmext.jar ibmorb.jar ibmorbapi.jar) were put to the folder jre/lib/endorsed of the server(Sun JVM 1.4.2 is used by SAP WebAS / XI).
    As the result, the Communication Channel Monitoring displays that the channel has erroneous state as well and the following error message is written:
   "No adapter registered for this channel"
We have not found the recommended solution either in SDN forums or in Internet in general. Is it yet possible to connect SAP XI to IBM WebSphere Default JMS Provider having mentioned product versioning? If yes, what settings have to be performed?

IBM Websphere Default JMS Provider which is installed alongwith the application server is nothing but a scaled down version of the IBM WebSphere MQSeries. you should be able to connect to it with the same settings that can be used for a separate MQSeries server connectivity from XI.

Not able to get the Application ID value in ADF Phase listener for Custom ADF application which integrates with Ebiz R12.2.3

Hi All ,
I am working on one custom Order Mangement ADF Application which integrates with EBiz R12.2.3.
We are trying to get the Ebiz userid ,username,Responsibility ID and Application ID in ADF through below Code
       public HashMap checkEBSSession(HttpServletRequest request,
                                   HttpServletResponse response) {
        System.out.println("In AMImpl.. checkEBSSession1");
        Session session = null;
        HashMap hmap = new HashMap();
        try {
            Connection conn =
                getDBTransaction().createStatement(1).getConnection();
            System.out.println("In AMImpl.. checkEBSSession2");
            EBiz ebiz =
                new EBiz(conn, "012E7E82CD8852BBE053860F6E0AD63413191049361744553610276495342217");
            System.out.println("In AMImpl.. checkEBSSession3");
            AppsRequestWrapper wrapper =
                new AppsRequestWrapper(request, response, conn, ebiz);
            System.out.println("In AMImpl.. checkEBSSession4");
            session = wrapper.getAppsSession(true);
            System.out.println("In AMImpl.. checkEBSSession5");
            Map columns = session.getInfo();
            System.out.println("In AMImpl.. checkEBSSession6");
            String respId = (String)columns.get("RESPONSIBILITY_ID");
            String currentUserId = (String)columns.get("USER_ID");
            String currentApplId = (String)columns.get("APPLICATION_ID");
            String currentOrgId = (String)columns.get("ORG_ID");
            System.out.println("In AMImpl.. checkEBSSession7...respId : "+respId);
            System.out.println("In AMImpl.. checkEBSSession8...UserId : "+currentUserId);
            System.out.println("In AMImpl.. checkEBSSession9...APPL_SERVER_ID : "+currentApplId);
            System.out.println("In AMImpl.. checkEBSSession10..OrgId : "+currentOrgId);
            logger.info("respid: " + respId);
            //System.out.println("In AMImpl.. checkEBSSession8");
            hmap.put("RESPONSIBILITY_ID",respId);
            //System.out.println("In AMImpl.. checkEBSSession9");
        } catch (Exception e) {
            System.out.println("Error: " + e.getMessage());
        return hmap;
By using this code I am Getting all the Information Except the Application ID.
If someone have any idea how to get the application ID please share it .
Thanks in Advance !!
Thanks & Regards
Apurv Agarwal

Hi,
since you implements the backing bean from PagePhaseListener. some where the same view is excuting before getting the selected record. Even if you select the record after excuteQuery() it will set the first record as selected. Please try to check some where query is excuting.
try give some more details like what are all the methods you are using in PagePhaseListener and where you worte u r coding.
Reg,
Brahma

Connectors For IBM Websphere

Hi all,
Please guide me on how to access through the WAS, the applications deployed on a WebSphere Application Server, without manually porting the EAR files and stuff.
I believe there might be some connectors.
Your help will be appreciated.
Thanx in advance.
Regards,
Sandip

You will need to check out service.sap.com/connectors or maybe it's connector without s.
You're looking for the JCo connector.

Can't set up wireless connection for HP C4385 All-In-One with Windows 7.

Hi guys,
I just got a new laptop with Windows 7 64 bit. I already had an HP C4385 All-In-One that I was using with my last computer. I have also just set up a new wireless network because I got a new cable provider. So basically I needed to do everything from the beginning.
When I inserted the setup CD and ran the setup program, it said I couldn't continue because my OS was not supported. I went to the HP website and found the solution, which was to plug the printer in via USB and let Windows Update find the latest driver. Ok, that's fine, the printer works now when the USB cord is plugged in.
To set up the wireless connection, the instruction manual says I need to do it through the network setup wizard p on the CD. But that brings me back to my original problem-- the setup CD won't work because it doesn't recognise Windows 7.
So my question is-- how can I update the network settings (SSID and key) on the printer without the network setup wizard?
Thanks for any help, this is really driving me crazy!

Download from hp.com here.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Integrate with websphere message broker

we plan to integrate Websphere Message Broker with E-business. We are looking at the different options like OMG, JMS node using OID , JMS node using weblogic app server etc.
Is there any difference between using OID and weblogic app server, other than from the configuration point.
is there is any comparsion between the different options available?

Hi;
Similar issue has been answered at -Steven Chan blog*
From blog:
Hello, RM,
I have not seen any Oracle-produced documentation along those lines. I don't think there are any Oracle teams that are investing in producing documentation for IBM WebSphere.
I would suggest contacting IBM to see whether they have produced any WebSphere-specific documentation.
Regards,
Steven
Referance:
http://blogs.oracle.com/stevenChan/entry/ebusiness_suite_release_1211_now_available
Ps: You can rise SR for your issue also
Regard
Helios

SSL connections to MySQL

I'm setting up Filr 1.0.1 and using external MySQL server instead of the MySQL Appliance. I have set up the MySQL server to allow SSL connections as described in http://dev.mysql.com/doc/refman/5.5/...nnections.html.
Can Filr be configured to use SSL connection for MySQL?

Joseph Marton wrote:
> This has not been tested and isn't supported, though that's not to say
> you might not be able to get it to work. If the Filr, MySQL, and
> Search appliances are all on the internal network another way to
> secure the connections would be to put the appliances into their own
> VLAN. This would keep the traffic separated from all other network
> traffic and help secure it.
A followup to this... another option is to add a second NIC to the Filr
appliance. This way you could have one NIC connected to your internal
or DMZ network, and the other could be connected to an isolated VLAN
which only has the MySQL & Search appliances connected. Today we don't
support multiple NICs in the Filr appliance, but that's coming in Filr
1.1.
Your world is on the move. http://www.novell.com/mobility/
BrainShare 2014 is coming. http://www.novell.com/brainshare/

ACE20 SSL-connection rate performance

Hello,
One of our customers are challenging our ACE20 modules ssl-connection rate performance. During a loadtest performed against our webportals, they concluded, that the ACE-module showed signs of severe performance degredations, when the number of new ssl-connections hit 40.
While I disagree with that conclusion, I find it somewhat difficult to disprove it. Nothing on the ACE-module suggest any ssl-resource depletion, the highest recorded ssl-connection rate is 677 tps and the license permits 10k. The context is currently sized to 4k. I've gone through numerous troubleshooting steps, trying to locate anything that would suggest a problem with the module, but so far nothing has turned up.
I've been given somewhat conflicting information about what the ssl-connection rate resouce actually represent. Some say is represent the total number of new ssl-connections pr/sec, other say it represents ssl-transaction capacity as a whole, which among other things would include ssl-handshakes. Regardsless, 40 in my opinion seems way to low and this is very inconsistent with the generel load on our modules, which often climbs into the hundreds.
So I'm looking for suggestions on how to conduct a simple ssl/tps test against the ACE-modules. The test is expected to be very basic, as I'm not looking to test the webportal end-to-end, but simply doing an ssl-tps performace test.
Any help will do
Thanks
/Ulrich

Hi,
The connection will be denied once the SSL connection rate is exceeded.
That can be identified by using the command :
show resource usage all
You will see something like this :
Resource Current Peak Min Max Denied
ssl-connections rate 995 1000 0 1000 28975
You will notice that the deny counter will start increasing once the rate is exceeded.
hope that helps.
regards,
Ajay Kumar

SSL connectivity for IBM WebSphere MQ to integrate with XI

Similar Messages

Maybe you are looking for