SSL enabling

Hi Experts,
My client wants to enable https for ITS. currently i have configured ITS for http.
I have installed latest sapcrypto files on the application server.
1. when i execute STRUST, I cant see the "SSL server" node.
(we are on ECC6.0 EHP4, SUSE 2.6. )
2. I tried to generate the certificate with sapgenpse gen_pse -p <filename>
It has asked for pin and owner name. (Distinguished name of PSE owner)
I am not sure what to provide here.
I am referring and performing as mentioned in sap note 510007. Please advice me. Am i doing it correct?
Do suggest me if i have to do any additional settings or am i missing some thing?
Regards,
Srihari
Edited by: Srihari Rao on Jan 12, 2012 5:20 PM

Hi,
Srihari Rao wrote:
>
> I have restarted the ICM. But when i open the browser
>
> http://xxxx.xx.xx.xx:8000/sap/bc/gui/sap/its/webgui
>
> I get the following on the display: No switch to HTTPS occurred, so it is not secure to send a password.
> Srihari
Check
https://xxxx.xx.xx.xx:ssl_port/sap/bc/gui/sap/its/webgui
The message with "no switch to HTTPS" is, I think, because the System Logon configuration from SICF is set to :
Actions During Logon
Protocol : "Do not switch"
You can choose "Logon via HTTPS" or "switch to HTTPS".
Regards,
Olivier

Similar Messages

Can port 25 be used for SSL-enable SMTP server ?

Hi,
Our customer is using port 25 for a SSL-enabled SMTP server without certificate. When our email client tried to connect to it, the following exception thrown:
DEBUG SMTP: exception reading response: javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connection?
Since we don't want to ask our customer to change their port configuration unless absolutely necessary, we did some tests with our own SSL-enabled SMTP server that uses certificate. Here is what I got:
1) with port 25, got the same exception as above;
2) with port 465, worked fine;
3) with any other randomly pick up valid port, worked fine.
This made me wonder if 25 is for non SSL SMTP server ONLY. By the way, I'm using Javamail 1.3.4 and JSDK 1.4.2_02. My question is whether we can configure javamail so that port 25 can be used by SSL-enabled SMTP server?
Your help will be appreciated.

Yes, port 25 is intended for non-SSL servers only, although that doesn't
prevent a client from making a plain text connection and then using the
STARTTLS command to switch the connection to SSL/TLS. JavaMail 1.4
supports that usage.
You can configure JavaMail to use port 25 for SSL connections if you
really want to. JavaMail 1.3.x requires you configure an appropriate
socket factory to get SSL connections; you can configure whatever port
you want for use with that socket factory.

What should be done in certmap.conf for 2-way SSL support from a standalone Java application to an SSL enabled LDAP Server

To support certficate based client authentication using 2-way SSL from a standalone java application which uses JNDI and JSSE1.0.2 to connect to an SSL enabled LDAP Server how do we configure the certmap.conf?Is there any additional setup required at the LDAP Server side apart from enablinf SSL with the option"Required Client Authentication" enabled.The 2 way SSL handshake goes through but the access log file (After configuring the certmap.conf for the issuer DN of the client certficate etc..)shows SSL failed to LDAP DN?But inspite of this access log error the Java client does get an SSL Connection object with which it is able to connect to the LDAP.IS the certmap.conf file being looked up by the LDAP Server at all?

have you out.flush() and out.close() before you call connection.getInputStream()?

Facing issue when LDAPSync is enabled for OIM-AD integration with SSL enabled

Hi
We are performing LDAPSync for OIM AD real time sync.We have done all configuration as per oracle documentation on LDAPSync for OIM 11gR2 : http://docs.oracle.com/cd/E27559_01/integration.1112/e27123/oid_oim.htm The OIM environment we tested is the latest OIM version OIM 11gR2 PS1 (11.1.2.1.0).
WE have performed LDAPSync enablement on postinstallation of OIM .So we dont have OVD , we have configured libOVD as mentioned in this doc.
We have performed following steps mentioned in this document in our OIM environment.
3.1 Enabling Post installation LDAP Synchronization
3.3 Creating Identity Virtualization Library (libOVD) Adapters and Integrating With Oracle Identity Manager
As attribute like password might be not getting updated in AD from OIM , we have configured SSL enabled integration in LDAP sync as mentioned in above document.
We implemented this step 3.4.1 Enabling SSL Between Identity Virtualization Library (libOVD) and Microsoft Active Directory,
but here it is not properly mentioned that about how to import public key certificate of AD into OIM envirioment for SSL.
We are getting following error message in logs : Looking at logs it looks like the import of AD SSL certificate did not happen properly in OIM environment. But ,we have imported it using keytool and OVD keystore ...please let us know if we are missing any configuration in this process.Above oracle document is not pretty clear on this.
<Dec 7, 2013 12:22:53 AM IST> <Warning> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.BackendJNDI> <OVD-40118> <Could not automatically detect binary attribute list: simple bind failed: 10.88.164.231:636.>
<Dec 7, 2013 12:22:53 AM IST> <Warning> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.JNDIConnectionPool> <OVD-60024> <Connection error: simple bind failed: 10.88.164.231:636.>
<Dec 7, 2013 12:22:53 AM IST> <Error> <oracle.ods.virtualization.engine.backend.jndi.LDAP2.BackendJNDI> <OVD-60143> <[#LDAP2] Unable to create connection to ldap://[10.88.164.231]:636 as null.
javax.naming.CommunicationException: simple bind failed: 10.88.164.231:636 [Root exception is javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty]
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:195)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2720)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:296)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:463)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:494)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.<init>(JNDIConnectionPool.java:156)
at oracle.ods.virtualization.engine.backend.jndi.RemoteServer.getJNDIConnectionPool(RemoteServer.java:163)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getLDAPContext(BackendJNDI.java:984)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:927)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.getHolder(ConnectionHandle.java:415)
at oracle.ods.virtualization.engine.backend.jndi.ConnectionHandle.search(ConnectionHandle.java:250)
at oracle.ods.virtualization.engine.backend.jndi.JNDIEntrySet.initialize(JNDIEntrySet.java:219)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.get(BackendJNDI.java:728)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:303)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
at oracle.ods.virtualization.engine.chain.plugins.usermanagement.UserManagement.get(UserManagement.java:742)
at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
...more
Caused By: javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:190)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1731)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(SSLSocketImpl.java:1692)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1675)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(SSLSocketImpl.java:1601)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:94)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at com.sun.jndi.ldap.Connection.writeRequest(Connection.java:414)
at com.sun.jndi.ldap.Connection.writeRequest(Connection.java:387)
at com.sun.jndi.ldap.LdapClient.ldapBind(LdapClient.java:332)
at com.sun.jndi.ldap.LdapClient.authenticate(LdapClient.java:190)
at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2720)
at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:296)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.createCtx(JNDIConnectionPool.java:463)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.create(JNDIConnectionPool.java:494)
at oracle.ods.virtualization.engine.backend.jndi.JNDIConnectionPool.<init>(JNDIConnectionPool.java:156)
at oracle.ods.virtualization.engine.backend.jndi.RemoteServer.getJNDIConnectionPool(RemoteServer.java:163)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getLDAPContext(BackendJNDI.java:984)
at oracle.ods.virtualization.engine.backend.jndi.BackendJNDI.getConnection(BackendJNDI.java:927)
...more
Caused By: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(PKIXValidator.java:57)
at sun.security.validator.Validator.getInstance(Validator.java:161)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.getValidator(X509TrustManagerImpl.java:108)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(X509TrustManagerImpl.java:204)
at oracle.ods.virtualization.engine.util.OVDTrustManager.checkServerTrusted(OVDTrustManager.java:99)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(ClientHandshaker.java:1198)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(ClientHandshaker.java:136)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Handshaker.java:593)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Handshaker.java:529)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:925)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1170)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(SSLSocketImpl.java:637)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(AppOutputStream.java:89)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
Let us know for any helpful pointers on this
Thanks in advance,
RPB25

Use the steps given below to perform import public key certificate of AD into OIM envirioment for SSL
Obtain the AD Certificates from the AD Administrator.
Copy the AD Certificates to the directory /jrockit-jdk1.6.0_20/jre/lib/security
Run the following command to import all the certificates
/jrockit-jdk1.6.0_20/bin/keytool -import -alias <provide_alias> -file <file-name> -keystorecacerts -storepasschangeit
4. The CA certificates are now present in the trust store.

Starting Server with SSL Enabled

I want to start iplanet directory server 5.1 with SSL Enabled, but It always ask me PIN Token.
I write slapd-test-pin.txt file as following :
slapd-test-pin.txt
-------begin-----------
Token:test123456
-------end ------------
I put the slapd-test-pin.txt into /usr/iplanet/server/alias
then, I restart directory server from command line.
/usr/iplanet/servers/slapd-test/stop-slapd
/usr/iplanet/servers/slapd-test/start-slapd
What's wrong ?
Thank you !!!!

I have a similar problem. I actually do set the correct format of certidcate db password file but the server stll does not start but reports the following:
[26/Sep/2003:17:21:11 -0400] - Sun-ONE-Directory/5.2 B2003.143.0014 (32-bit) starting up
[26/Sep/2003:17:21:11 -0400] - ERROR<12362> - Connection - conn=-1 op=-1 msgId=-1 - PR_Bind() on address <all interfaces> port <636> failed : error -5966 (Access Denied.).
I installed the certificate correctly. It was obtained from VeriSign with a ds 5.2 generated request.
Any ideas?
Thanks in advance!

IHat : connecting to an SSL-enabled opmn notifcation server

I'm having trouble connecting iHat to an app server
instance, where the opmn.xml file contains
<notification-server>
<port local="6100" remote="6200" request="6003"/>
<log-file path="$ORACLE_HOME/opmn/logs/ons.log" level="4" rotation-size="1500000"/>
<ssl enabled="true" wallet-file="$ORACLE_HOME/opmn/conf/ssl.wlt/default"/>
</notification-server>
In the ons.log I get errors
... :6200 SSL handshake failed
Has anyone had any success working around this problem?
Thanks
- Charles Poulsen

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"

Problems in accessing an SSL enabled site through Weblogic 6.1

Hi,
We want to connect to an SSL enabled site (https://test.SalesForce.com) through Weblogic 6.1. We are using JDK1.3.1_08 and Apache axis.
We have followed the appropriate steps explained in the URL -
http://www.pankaj-k.net/WSOverSSL/WSOverSSL-HOWTO.html
As mentioned in the above link, we made the configurations in JDK 1.3.1_08 to put the jsse.jar and other important JARs in jre\lib\ext folder and also updated the java security file to add the proper "Provider".
After that we tried to execute the test application to connect to an SSL site specified in it. It is a stand alone Java application and connects to the site and reads the bytes of the home page and displays them on the console.
When we tried to connect the SalesForce test site, we figured out that we were able to connect to the site and were able to read entire stream of bytes.
Then we copied the same code in a sample JSP, set the JDK1.3.1_06 as the JAVA_HOME for Weblogic6.1 and tried to connect to our test site through that JSP.
We observed that it is connecting to the site but reading just a few initial bytes and not the entire stream.
When we tried the same steps with Weblogic8.1 and JDK1.4.2_X, it works fine and reads the entire page with Weblogic8.1 as client.
So, we observed that the standalone application works fine with JDK1.3.1_08, it also works fine on the the Weblogic 8.1 and JDK1.4.2_x combination, but when we use Weblogic6.1 and JDK1.3.1_08, it does not work properly.
Is there any setup issue in Weblogic 6.1 regarding connecting to a SSL enabled site?
Our actual problem scenario is a bit different than this, but we are sure that it is related to this situation and a solution to this problem can resolve the actual problem.
Another question we have is do we need to configure SSL in Weblogic 6.1 and also care for installing certificates evenif Weblogic 6.1 in this case is a mere client?
We have tried to connect to the same site using Weblogic 8.1 and JDK1.4.2_X. We did not require any kind of certicates in that case. Hence I want to clear my doubt.
Please help.

Hello,
Just wondering if you ever found a solution to this problem. We are suffering just about the exact same issue, where our environment with WebLogic 6.1 SP4 cannot access an SSL enabled site, but our WebLogic 8.1 SP2 upgrade environment can. The only difference we've been able to pinpoint is that our 6.1 server connects via TLS1.0 (SSL3.1) and our 8.1 server connects via SSLv3 (SSL3.0). Does anyone know how to control which version of SSL WebLogic 6.1 uses?

How do I ssl enable targets and EM in 10.1.2

How do I ssl enable targets and EM in 10.1.2 in
"Standalone console" (is this the correct forum?)
These are the steps I followed
1) emctl secure em
This enabled ssl for EM.
Problem is with monitoring a target - Oracle Reports
2) The I SSL Enabled reports. Added a port in webcache and gave default wallet directory. Following works
https://host:port/reports/rwservlet?getserverinfo
3) In sysman/emd/targets.xml , for reports target I changed http protocol to https and also changed port
(Report uses HTTP Fetchlet for getting metrics)
But I am not able to monitor Oracle Reports successfully.
I get the following in EM logs
emias.log
<MetricGetError ERRMSG="Error connecting to <host:port> return status = -1 " ERRID="32" ERRCODE="3">
emagent.trc
2005-01-05 18:29:07 Thread-2228 ERROR ssl: nzos_Handshake failed, ret=29024
2005-01-05 18:29:07 Thread-2228 ERROR http: 652: Unable to initialize ssl connection with server, aborting connection attempt
2005-01-05 18:29:08 Thread-2228 ERROR engine: [oracle_repserv,Ben.<host>_Reports_Server:rep_strep13,ServerPerf] : nmeegd_GetMetricData failed : Error connecting to <host>:4447 return status = -1
Any idea how to do SSL enable targets (in particular Oracle Reports) in 10.1.2 ?

Open and close iPhoto or GarageBand and relaunch FCP X. Sometimes just relaunching FCP X works also. You can trash FCP X preferences as well if the above doesn't work.

SSL enabling OAS 10.1.2.3.0 Forms/Reports Home installation

I need the steps to SSL enable to this type of Oracle App Home. Thx

I need the steps to SSL enable to this type of Oracle App Home. Thx

Intermittent errors when logging to the Workspace - 9.3.1 - SSL Enabled

Hi,
We are on 9.3.1 and everything is SSL enabled except Shared Services.
Several times a day, when users log on to the Workspace, they get an "Invalid username or password" error message. They finally get in after 2 or 3 attempts.
Likewise, occasionally, when opening a Financial Report in the workspace users get "BR - Access is denied". After logging back in a couple of times the problem goes away.
All users are affected but randomly.
I have a feeling it could be related to the SSL congifuration.
Has anyone come across this? we are using an F5 http server.
An Oracle consultant suggested making sure that sticky sessions are enabled but we are not sure how to do that.
BI+ has been configured with Tomcat and IIS.
Thanks for your help.

It depends how you use Weblogic. If it runs as a windows service then I think you should be able to increase the heap size in the Windows registry. Try looking under HKEY_LOCAL_MACHINE -> Software -> Hyperion Solutions -> Hyperion Reports ->HRWebSRV and look for an Xms (Minimum heap size) and Xmx (Max heap size values)
If you start your services via the weblogic console then you will need to log on to the Admin console under the Java section.
The heap size values depend on each environment but as long as you have at least 4GB RAM on your server you should be able to set
-Xms512m
-Xmx1024m
Additionally check your SSL config as this was causing us a lot of problems too.
Hope this helps.
Seb
www.taysols.com.au

SSL Enabling Shared Services and Active Directory

The SSL config guidfe suggests that a valid certificate (CA) must be issue for User directories (MSAD/LDAP), Web and application servers. Is it essential to obtain a CA for for MSAD as well? Can we do without MSAD cert? We have the certs for our Web and App layers ready. We are not sure if the IT department has SSL configured MSAD. If MSAD/LDAP is not SSL configured - can we still go about SSL-Enabling Hyperion? Thanks.
-- Srini

If your MSAD is set for SSL, you can import their certificates through your Java Application Server. Since you are unsure, I would set up MSAD and if you are able to browse for users on the AD domain in Shared Services, you are good to go.
I must say that SSL is a big pain from my point of view. Unless you are required to encrypt because of the data you have stored, I would pass it up. The certificates often expire on a yearly basis and there are many different certificates to keep track of. Multiply that by Development, Prod, BCP or Recovery server, and you're looking at lots of maintenance.
The big pain comes when the signer certificate for your server expires because after the next reboot or restart of your JVMs, Shared Services starts up but none of the other applications can talk to it which means your whole application is down until you get that certificate fixed. My organization is fairly strict on their controls, so that means that I either make a federal case out of my system being down or I get to wait three days for a change request. Big pain in the rear.

WCF service fronted with SSL enabled NGINX load balancer shows HTTP based WSDL url instead of HTTPS

Hi,
I have WCF service hosted using IIS 8.5 on application server. And application servers are fronted with NGINX load balancer with SSL enabled. Backend communication protocol between NGINX to application server is http.
When customer visits public domain url (https://xxx.com/service.svc), they can see the WSDL url with http://xxx.com/service.svc?wsdl.
What change should I make so that WSDL url will have https instead of http ?
This is service side configuration.
<system.serviceModel>
<services>
<service name="Service.IService">
<endpoint address="" binding="basicHttpBinding" bindingNamespace="http://xyz.com/Service" name="Service_Endpoint" contract="Service.IService" />
</service>
</services>
<bindings>
<basicHttpBinding />
</bindings>
<client />
<behaviors>
<serviceBehaviors>
<behavior>
<serviceThrottling maxConcurrentCalls="5000" maxConcurrentInstances="2147483647" maxConcurrentSessions="5000" />
<serviceMetadata httpGetEnabled="true" />
<serviceDebug includeExceptionDetailInFaults="true" />
</behavior>
</serviceBehaviors>
</behaviors>
<serviceHostingEnvironment multipleSiteBindingsEnabled="true" />
</system.serviceModel>
Thanks in advance !!

Hi,
For this scenario, you could just enable SSL in IIS to get HTTPS endpoints. If your service is exposed at https then you configure the same using “httpsGetEnabled”:
<behaviors>
<serviceBehaviors>
<behavior
name="MyServiceTypeBehaviors"
>
<serviceMetadata
httpGetEnabled="true"
/>
</behavior>
</serviceBehaviors>
</behaviors>
For more information, you could refer to:
http://www.codeproject.com/Articles/327260/What-s-new-in-WCF-Automatic-HTTPS-endpoint-for
http://blogs.msdn.com/b/brajens/archive/2007/04/26/accessing-description-metadata-wsdl-of-wcf-web-service.aspx
Regards

Steps to make iPlanet SSL enabled-URGENT

Hi
I want to know how to make iPlanet server SSL enabled . I have already installed the server certificate on the iplanet . Is there anything else i need to do to access a servlet on iplanet thru Https .Basically what are the next steps involved after installing certifictae in iPlanet ?
I tried accessing the servlet thru a sample java client ...it gives me Malformed URL Exception .
As far as i know there wouldnt be any code change inside the servlet to make it Https Enabled..
Can someone help me ....Pls let me know....This is URGENT ..
Thanks
varahan

After you successfully installed the server certificate you only need to set encryption to "on" in the preferences tab (iPlanet 4.1 or earlier). No other changes are necessary.
Did your sample Java client also talk "https"?

Urgent JMS issue with SSL-enabled cluster

Hello, dear All!
We have deployed a SAP WebAS SP13 SSL-enabled cluster (2 servers) and face the following strange behaviour:
When both servers are running our queue-based message driven beans (MDB EJBs) never get any messages.
However, JMS topic subscriber threads (not implemented as MDBs) work fine on both servers and receive JMS broadcasts. As well web-initiated JMS queue browsing works fine.
Then if only one (central) server is up, queue-based MDBs work fine and start receiving messages...
If you know or guess what might be an issue it would be greatly appreciated!
Thank you and best regards,
-Yuri

Hi!
Yes, I solved this problem. You have to set your certificate to the LDAP server and get SSL enabled. You should also add same certificate to your jdk's cacerts file. That should help. :)
Janne

Epm Inplace upgradation with SSL enabled

Hello Experts,
We have plan to inplace upgradation of hyperion product 933 to EPM 122 with SSL enabled.
My questions regarding to this concerns are:-
1)Is it possible to make inplace upgradation 933 to 122 with SSL enabled?
2)What will be the risks for this plan
3)And suggest pros and cons for this
Please reply my questions soon.. and suggest me what will be better,Suggest ideas for this.
Thanks in advance,

980137 wrote:
Please reply my questions soon.. and suggest me what will be better,Suggest ideas for this.
I think you should discuss your upgrade options with a consultant instead of trying to get answers to those sort of questions on a forum.
Cheers
John
http://john-goodwin.blogspot.com/

NmConnect() error when SSL enabled

Hello,
I am on welogic 10.3.2 and I am trying to create my domain to use SSL.
I created a domain and Admin server with SSL enabled. Before starting the admin server. I start the nodemanager and then try the nmConnect as below and i see this error. Please help.
nmConnect('weblogic','weblogic1','localhost','10001','../wldomain','skDomain')
weblogic.nodemanager.NMException: Configuration error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:299)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:312)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:248)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:169)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:

Hello,
I am on welogic 10.3.2 and I am trying to create my domain to use SSL.
I created a domain and Admin server with SSL enabled. Before starting the admin server. I start the nodemanager and then try the nmConnect as below and i see this error. Please help.
nmConnect('weblogic','weblogic1','localhost','10001','../wldomain','skDomain')
weblogic.nodemanager.NMException: Configuration error while reading domain directory
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:299)
at weblogic.nodemanager.client.NMServerClient.checkResponse(NMServerClient.java:312)
at weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:248)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199)
at weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205)
at weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52)
at weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175)
at weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:169)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:

SSL enabling

Similar Messages

Maybe you are looking for