SSL encrypted webmail won't run
I am having a problem getting a SSL encrypted GroupWise WebAccess to load the Login page in Safari on Vista (it works in Safari on XP). GW WebAccess works just fine in Firefox if I turn off TLS, and works in IE 7 if I turn ON SSL 2.0. In Safari there is no granular control over Web encryption. Does anyone have any idea how to get it to work? I really am trying to make Safari my primary browser, but GW WebAccess is very important for me to use it... It times out and I get, "Safari could not open the page “https://groupwise.bronsonhg.org/gw/webacc” because the server is not responding." What's interesting, is that I actually use http://groupwise.bronsonhg.org but it does resolve to the above SSL address - its then that it sits there and times out. Also, I tried it on Safari on a MacBook, and it works fine. Vista is the only OS this website doesn't work on Safari. Any idea's?
Sounds like Safari is an unsupported browser for this web application.
Try this: click Develop -> User Agent -> Internet Explorer 7.0
Similar Messages
-
SSL encryption for Apex 4.1
Hi Guys,
I am trying to set up SSL encryption for my local install.
I am running APEX 4.1 in Windows 7 (32 bit) , Oracle XE 11G with embedded plsql gateway setup.
The APEX documentation I looked at that deals with SSL:
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21678/adm_mg_service_set.htm#AEADM297
instructs to turn HTTPS on in APEX_ADMIN (Internal schema) under security.
It didn't work as APEX was visible still under http://localhost:8080/apex and using HTTPS gave page not found error. On top of that It locked out my Admin account for INTERNAL workspace. So I had to switch it back via SQL query in SQL plus.
From limited experience in doing something similar in Tomcat, I believe one needs certificates etc before proceeding with this.
Anyone who has done this before, can you please point to a any documenation/blog post, tutorial etc that shows how its done? Many thanks.Hi,
http://docs.oracle.com/cd/E17781_01/install.112/e18802/toc.htm#BABGCDJJ
>
HTTPS is not supported natively with the HTTP listener built into Oracle Database XE. If you want HTTPS support, use an alternative Web listener, such as Apache, that does provide HTTPS support, and provide proxies for the URLs provided by Oracle Database XE.
>
Regards,
Jari
http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Edited by: jarola on Jan 25, 2012 9:42 AM
That APEX instance admin parameter you have change do not enable HTTPS. It require that you use HTTPS on your web listener.
Here is how reverse HTTPS Requirement for APEX instance admin
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21678/adm_mg_service_set.htm#autoId17 -
Ok - not sure if this goes in this section or not.. but it's a technical question.
My b/f bought me a Dell Laptop last week. It has the recommended minimum of everything adobe says it needs for photoshop CS3 (see below for 1721 specs)
When I installed it on the laptop - it was slow, but said it installed. But when I go to open up Photoshop, it opens the screen - and then just hangs. After about 5 minutes it says not responding and I close it. Any of the other programs that came with won't even get that far. I click on them and it gives the little "thinking" circle (as I call it.. lol) and then nothing.
I have read that CS3 has issues with Vista - but their site says the home premium should work. I've also read about 64 bit issues.. but the OS is 32 bit - so it's capable of running 32bit systems... I guess.
I called adobe yesterday after installing and reinstalling CS3 15+ times... with the same issue. I was on the phone for about 2 hours with them. Basically - they have NO CLUE what it would be since it installs fine and opens with no error messages. I checked the log files and there is nothing in there I see that says any kind of error.
I have disable windows defender, uninstalled McAfee and google desktop (all are known to cause issues with CS3), I have ALL non MS startup services turned off.. I have turned off the MS users control.. all suggested by the adobe tech.
I have installed using the run as administrator. Nothing. Created a new admin account and installed on that user and opened on reg admin account. Nothing. (again typical things that correct cs3 install issues)
The last thing the guy said was that it might be a video issue. I checked and there aren't any issues mentioned and no driver updates listed.
We tryed installing this on my b/f's laptop. He bought the exact one I have (except his is red.. mine blue.. lol) and it does the EXACT same thing...
So today we called dell. they say it's a software issue and won't answer any questions for free. Apparently only hardware support is free... But they won't accept this is a hardware conflict with the software..
errrrr
Anybody have any clues on this?
=======================================
LAPTOP SPECS:
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz) Genuine Windows Vista Home Premium
Operating System
Genuine Windows Vista Home Premium
Memory
2 GB DDR2 SDRAM 677MHz (2 DIMMs)
Hard Disk Drive
120 GB SATA Hard Drive (5400 RPM)
Video
ATI RADEON Xpress1270 HyperMemory
Media Bay
8X DVD +/- RW w/dbl layer write capability
Base
Inspiron 1721 Notebook: AMD Turion 64 X2 Mobile Technology TL-56 (1MB/1.8GHz)
Bluetooth Wireless
Bluetooth Wireless Card 355
Software Upgrade
Microsoft Works 8.5
Premium Pack - Advanced Photo+Music: Deluxe Pack + Paint Shop Pro XI
NoteBook Screen
17 inch WXGA+ TrueLife Glossy Notebook Screen
Hardware Upgrade
No Camera
6 Cell Primary Battery
90W AC Adapter
Network Interface Card
Dell 1505 Wireless-NRob - thanks for taking a stab at this.
I have tried installing from the DVD and also from the zip file. the zip file was extracted to the hard drive brfore I ran it - and I ran it as administrator.
And when it stalls - it gives the (NOT RESPONDING) tag on the window - which usually means that even if I leave it (and I have for up to 20 minutes) - still nothing.
Here's the update from my dealings with DEll today...
Dell tech support guy told me that it was a know issue that CS3 WON'T run on Vista and that Adobe is working the issue
Told them that I knew others that were running it on Vista and it worked fine. They had no answer.
Then I waited for the Technical support manger to call. This is after expressing my displeasure to the technical supervisor about them trying to pawn this issue off on anyone else but themselves. Why can't they go grab a 1721 off the shelf and replicate the issue and try to figure it out from there?!?!?!
I used to work on a network helpdesk.. if I tried to pull that crap answer without trying to replicate the issue and AT LEAST try to find an answer.. I wouldn't have lasted very long at all!!!!
The Tech manager told me to call customer support and ask for an OS swap (from vista to XP) because they don't know what the problem is and so it muct be a Vista compatibility issue
I call customer support. They say that they no longer will give out XP since it is a step backwards. And to install XP on the machine ourselves (even a liscensed copy) would void the warranty. They suggest I talk to sales about swapping the laptop out with a "more compatible" one. Which isn't a totally bad idea since I really do think it is an AMD/ATI conflict.
They transfer me to Sales.. ohh - you used the Employee Purchase program.. you need to talk to them.. and they transfer me.
The EPP people tell me.. ohhhh you didn't actually go through us since you bought it off the Dell Outlet store. So they transfer me.
The dell outlet store says they will be more than happy to swap me out to an Intel based machine.
Only catch is the Intels are more expensive. They don't have any for the price we paid for the amd's. Fot about $40 more I can get one with a slower processer, a gig less ram, no dvd writer, but with a 160gb hd. To get compatible to mine - would be about $150 more.
And they only have silver in the low end, and black or brown in the higher. Not that I really give a s@!t what the color is.. but it brings up the main reason I am sooo pissed abput all of this....
Why should I have to pay more money, settle on doing without option/features want/need.. just because THEY don't want to take the time to figure out what the real issue is?!?!?! Why isn't it them doing these calls and doing all this troubleshooting.. Why am I being peanilzed for THEM not wanting to do their jobs....
Told the B/F that I am done with Dell. That I don't want the laptop anymore and I don't want any other one from them. He says he'll pay the extra and get me the other one.. but that isn't the point....
Not sure what my next move is. -
How do I install the FM10 licensing fix when Adobe Update Installer won't run?
Adobe Update Installer won't run so can't install FM10 licensing fix
This question is Not Answered.(Mark as assumed answered)
Aug 9, 2013 12:09 PM
Tags (edit): none (add)
Because FM10 began crashing with "fatal" errors whenever I tried to generate a TOC for a small (65 page) book, I researched workarounds and none of them worked. Now that I have delivered a crippled deliverable via Acrobat manipulations, I would like to fix FM. I uninstalled it and reinstalled it, got some updates, and then received the "licensing fix" error that popped up in January. I'm wondering why this fix was included not in the updates. That said, the licensing fix package, first, would not unzip so I downloaded it again. I unzipped it but I got a message that Adobe Updater Installer could not run and after several clicks I found that file. I reinstalled Adoble Update Installer but it still does not run.
I am running Windows XP and have TCS 3.5.I uninstalled FM and RH but not Acrobat, Captivate, or Photoshop.
So, now what? Listen to my supervisor who says never use FM again?
P.S. Why do I have to enter a title for my question and then do it again when this page opens??Give Adobe Support a call or contact the TCS team at [email protected] - something in your environment is causing the installer to fail (I'd guess).
-
Action steps that won't run correctly in PSE 7/8/9 (but did in 4 and 6)
I have a wonderful action that was written to work in PSE 3/4/6. It won't run in PSE 7/8/9. After fooling around for a while, I think I understand why. Adobe changed the way Adjustment Layers are handled. In earlier versions of Photoshop and Elements, Adjustment Layers threw up a modal dialog box. That changed so that Adjustment Layers now appear in the Palette Bin as a palette.
Here a sample of some of the action steps that won't work correctly:
Make adjustment layer
Using: adjustment layer
Type: levels
Set Selection
To: none
Set current layer
To: layer
Name: “Adjustment 1”
Set current layer
To: layer
Mode: luminosity
Stop
Message: “Move gray slider left”
With Continue
Set current adjustment layer
To: levels
In earlier versions of PS and PSE, the way these steps would work is that a new adjustment layer would be created, the dialog box giving the instruction would open, it would be dismissed by clicking "Continue," and then the "Set current adjustment layer to: Levels" would generate a model adjustment layer dialog box would open up which would let one make the adjustment.
In newer versions, since Adjustment Layers are handled in the Palette Bin, after dismissing the instructions, the action doesn't stop to allow the user to make change the sliders on the adjustment layer.
The action runs perfectly in CS4 and CS5 and throws up the levels adjustment modal box as it did in PSE 4 and PSE 6, but the action doesn't throw the modal box in PSE 7/8/9
Does anyone know of a way to alter the action steps to allow the action to stop to allow the adjustment and then to resume again?Adding a new levels adjustment layer on top of the Midtone contrast layer
should work, just use a clipping mask to restrict the adjustments to the
areas of the levels adjustment layer below. The histogram will be different, but
actually testing the action is really the only way to know if that makes any difference.
Replacing the levels adjustment layer is another option, though it requires a few more steps.
The following assumes when the action gets to this point,
the Midtone contrast adjustment layer is the active (selected) layer.
To record this part of the action:
1. Duplicate current channel (in the channels panel. drag the Midtone contrast mask
down to the Create new channel icon at the bottom of the channels panel)
2. Ctrl+click on the newly created channel (Midtone contrast mask copy)
This loads the selection of that channel.
3. Drag the new channel (midtone contrast mask copy) to the trash icon at the bottom
of the channels panel.
4. Back in the layers panel, delete the Midtone Contrast adjustment layer.
5. Go to Layer>New Adjustment Layer>Levels
This creates a new levels adjustment layer using the selection loaded from
the duplicated channel and opens the levels dialog.
To load the RGB (composite) as a selection, Ctrl+click on the rgb in the channels panel
and the same is true for the red, green and blue channels.
With layer masks, elements doesn't seem to want to load them as selections in actions,
so that's the reason for the action steps above.
MTSTUNER -
CS2 won't run, says activation code no longer usable. Been running win7 on this system 3 years. Adobe says it won't activate in win7. Well, it did, and ran just fine. what's up?
I assume when you say "Adobe says it won't activate in win7" that you talked to customer support....
A drive change could trigger the need for reactivation. Did you tell them that you're running from a mirrored drive?
It sounds to me that they're being aggressive about trying to get you to upgrade when they should still be supporting you with active maintenance of their activation database.
But unfortunately if you can't get them to adjust their database you're out of luck.
-Noel -
I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.
I ended up putting it in DFU mode. It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
Itunes still didn't recognize the device for whatever reason.
So I used redsn0w. I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras. -
The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154] -
I've got a fresh RHEL 6.2 64-bit instance on EC2. I've turned off the firewall and have installed an FMS 4.5 dev server. In the logs directory I have admin and master logs (only). The admin logs look ok:
#Fields: date
time
x-pid
x-status
x-ctx
x-comment
2012-02-29
09:24:26
1144
(i)2581173
FMS detected IPv6 protocol stack!
2012-02-29
09:24:26
1144
(i)2581173
FMS config <NetworkingIPv6 enable=false>
2012-02-29
09:24:26
1144
(i)2581173
FMS running in IPv4 protocol stack mode!
2012-02-29
09:24:26
1144
(i)2581173
Host: ip-10-204-143-55 IPv4: 10.204.143.55
2012-02-29
09:24:26
1144
(i)2571011
Server starting...
2012-02-29
09:24:26
1144
(i)2631174
Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
2012-02-29
09:24:27
1144
(i)2631174
Listener started ( FCSAdminAdaptor ) : 1111/v4
2012-02-29
09:24:28
1144
(i)2571111
Server started (./conf/Server.xml).
The master logs contain these lines, repeating every 5 seconds:
2012-02-29
10:43:17
1076
(i)2581226
Edge (2790) is no longer active.
2012-02-29
10:43:17
1076
(w)2581255
Edge (2790) _defaultRoot__edge1 experienced 1 failure[s]!
2012-02-29
10:43:17
1076
(i)2581224
Edge (2793) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
The FMS install failed, complaining about a missing libcap.so until I installed the libcap.i686 package. The following libcap packages are now installed:
libcap.i686
2.16-5.5.el6
@rhui-us-east-1-rhel-server-releases
libcap.x86_64
2.16-5.5.el6
@koji-override-0/$releasever
libcap-ng.x86_64
0.6.4-3.el6_0.1
@koji-override-0/$releasever
libpcap.x86_64
14:1.0.0-6.20091201git117cb5.el6
Any help would be most appreciated.
/Ed.I had the same problem on CentOS 6.2 x86_64, albeit not on EC2. It seems that the installer creates a symlink to the i686 libpcap (libcap.so.1 -> /lib/libcap.so.2) and fmsedge won't run with it. Manually removing that symlink and instead linking to the libcap.so.2 in /lib64 solved the problem for me.
cd /opt/adobe/fms
rm libcap.so.1
ln -s /lib64/libcap.so.2 libcap.so.1
HTH, Jeremy -
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install. -
ITunes won't run at all after updating 10.5
I have recently updated iTunes to 10.5, and now it won't run/open at all. Gives me an error and doesn't even open it at all. I have tried everything apple says to do but nothing has worked so far. Please help me, I really want my iTunes running again! If you need more information/details, please ask. I'd be happy to help you if you're going to help me. :-)
Anyone? Please?
-
I have been trying to open a browser window with Mozilla Firefox 6.0.2 (x86 en-US). It won't run, however, when I try to uninstall the program, it says I have to close firefox first. Win 7 task manager does not show the program as running.
I tried again, and still get the same message from Firefox. I checked the task manager again, not running. Tried running it - won't run. Tried uninstall, got the same message, close firefox before trying to uninstall - firefox isn't running!
I would appreciate any help that you could give me. I want to use firefox, especially since it is the browser that opens Webkinz correctly for my grandkids.In the task manager, are you looking at Processes? That is where you find Firefox listed when you see no interface, not in Applications.
This page might have some useful information about that problem.
* http://kb.mozillazine.org/Profile_in_use -
Think this is not right somehow but I'm trying to sync an old iPhone 3G with this PBkG4 running iTunes 9 but it refuses and tells me I need iTunes 10.1 or higher. I can;t find this to download. Can anyone help?
iTunes 10.1 won't run on Mac OS X 10.4. You must buy Mac OS X 10.5 on DVD to use that iPhone with a G4 or G5 Mac; places such as Amazon sell it.
As iTunes 10.1 won't run on any configuration which iTunes 10.5.3 won't run on, Apple no longer makes it available to the public.
(64234) -
EJB 3.0 App won't run on OAS 10.1.3.1 AIX5L
Hi All,
I'm developing Application with Struts + JSP + EJB3.0 with JDev 10.1.3. It runs well on embedded OC4J with JDev. And it runs well also on Oracle Application Server 10.1.3.1 + Windows XP Prof. But when I deployed it on Oracle Application Server 10.1.3.1 + IBM AIX 5L which is my production environment, the application won't run.
I try to narrowing down the problem, so I create a simple EJB3.0 Application. It consist of 1 Entity from Table (JPA/EJB3.0) and the entity has queryFindAll() method. One simple Facade Session Bean EJB invoke it. 1 JSP file call a class that do the context lookup to SessionBean EJB.
This simple application runs well on both platform, i.e Windows XP Prof and IBM AIX 5L.
But when I try to create an application that has complex relationship, i.e has relation many-to-many and one-to-many, the application wont run on OAS 10.1.3.1 on IBM AIX5L. Instead, it runs well on OAS 10.1.3.1 on Windows XP Prof.
this is the error messages in log.xml from OAS 10.1.3.1 on IBM AIX5L:
[SessionEJB:public java.util.List tintin.model.SessionEJBBean.queryBiOfficesFindAll()] exception occurred during method invocation: oracle.oc4j.rmi.OracleRemoteException:
javax.persistence.PersistenceException: Exception [TOPLINK-7158] (Oracle TopLink Essentials - 2006.8 (Build 060829)): oracle.toplink.essentials.exceptions.ValidationException
Exception Description: Error encountered when building the @NamedQuery [BiOffices.findAll] from entity class [class oracle.toplink.essentials.internal.ejb.cmp3.metadata.queries.MetadataNamedQuery].
Internal Exception: java.lang.IllegalStateException: ClassLoader "ejbtest.root:0.0.1" (from <application> in /oraias/product/10131/gebas/j2ee/oc4j_geb/applications/ejbtest/):
This loader has been closed and should not be in use.; nested exception is:
javax.persistence.PersistenceException: Exception [TOPLINK-7158] (Oracle TopLink Essentials - 2006.8 (Build 060829)): oracle.toplink.essentials.exceptions.ValidationException
Exception Description: Error encountered when building the @NamedQuery [BiOffices.findAll] from entity class [class oracle.toplink.essentials.internal.ejb.cmp3.metadata.queries.MetadataNamedQuery].
Internal Exception: java.lang.IllegalStateException: ClassLoader "ejbtest.root:0.0.1" (from <application> in /oraias/product/10131/gebas/j2ee/oc4j_geb/applications/ejbtest/):
This loader has been closed and should not be in use.
What could be the root cause of these errors? I've tried to compared all components that are installed on WinXP box and AIX5L. I can't find any clue of it.
Could someone please help me? Thanks...I found Error Code for TOPLINK here: http://www.oracle.com/technology/products/ias/toplink/doc/10131/main/_html/errcode007.htm
but it is strange, that my error exception is TOPLINK-7158:
7158: ERROR_PROCESSING_NAMED_QUERY_ANNOTATION
Cause: Error encountered when building the @NamedQuery annotation from entity class ClassName.
Action: Ensure the correctness of the annotation specification.
how come that error only occured in OAS 10.1.3.1 on AIX 5L, but it didn't occur in OAS 10.1.3.1 on Windows XP Pro?
Is it really the root cause or OAS throws wrong exception code? Could someone from Oracle help me please? -
Install disk for ps elements 6 won't run on my laptop...what can i do?
The install disk for PS Elements 6 won't run on my laptop. What can I do?
the oldest version of pse available from adobe is pse 7.
so, your options (via adobe) are limited to purchasing pse 12 upgrade for $80, http://www.adobe.com/cart.html?marketSegment=COM&editSku=65224790
Maybe you are looking for
-
So today I get home from work and wake up my Mac. Safari instantly crashes when I try to run it. I reset it and restart the computer. Still crashes. I delete all my preferences, caches, etc, and restart the computer. I repair permissions. Safari stil
-
Urgent...Please help with this HS
INITHSODBC.ORA ============== HS_FDS_CONNECT_INFO = SPS_BusInt1 //this is the System DSN for Sybase HS_FDS_TRACE_LEVEL = ON HS_FDS_TRACE_FILE_NAME = HS_SPS.log LISTENER.ORA ============== SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME = O
-
Not sure Time Machine is set up properly
I launched Time Machine today on my Mac Pro Quad running 10.5.6. The backup drive is a new internal WD 1.0TB sata drive I got as a christmas present. It is in drive bay 2. My computer, naturally, has the boot drive it came with and this seems to be b
-
Has anyone any idea how to accomplish this? I want a TAB as separator, not a comma or semicolon. I can't put a "\t" in this place, because there is only room for 1 character. If I paste a TAB from notepad into this field, then in the CSV there will b
-
Message Types in DELVRYxx IDocs
Can anyone tell me why SHPORD/WHSORD/SHPCON/WHSCON message types apply for idoc DELVRY03 but not for DELVRY05? I thought each new version of the IDoc would still be used for the original message types. Thanks, Keith