SSL Error 61: You have not chosen to trust "GeoTrust SSL CA - G2"

SSL Error 61: You have not chosen to trust "GeoTrust SSL CA - G2". I cannot connect via Citrix, because I cannot choose "trust" for this certificate.
Does anyone have a solution for this? I use OS yosemite.
Thanks

Citrix Certificate Error

Similar Messages

My employer has a new Citrix portal. When I try to enter, I get an error message--"You have not choxsent to trust Thawte SSL CA". How do I set this as a trusted cite on Firefox?

should read "you have chosen not to trust Thawte SSL CA." Our help desk says I need to set this as a trusted cite on Firefox 4. I can't find an option to do so.

That happens if that root certificate is not installed in Citrix.
See http://support.citrix.com/article/CTX711855

You have not chosen to trust "USERtrust Legacy Secure Server CA"

Trying to start a Citrix Session from Safari.
This has never been a problem before.
Now I cannot access - I get error message You have not chosen to trust "USERtrust Legacy Secure Server CA".
Downloaded latest Citrixviewer - still problem.
It looks like I have the certificate and it looks OK.
Help anyone?

Hi, I had the same thing happen to me. So you need to go to your keychain, open it up and go to your bottom left hand corner and click on show key chains, look for X509 anchors this is where you can find and get access to your certificates. highlight then go up to top of column and click on the padlock. to unlockthe X509 anchors keychain, usually the pass word is your login password. If there is no password asked for you need to make one, this is a high alert area and should be secured. the padlock should then unlock. go over to where you see the lists of certificates and scroll down to the one you need, dbl click the certificate will show in another pop up window. move your cursor over the icon certificate with the option button pushed with your mouse cursor drag the certificate onto the desk top. Dbl click on certificate key chain then asks if you want to add to your key chain click on scroll down button (keychain) to X509 certificate dbl click and it should accept the certificate. you are done. I hope this helps you. Kimber919

"you have not chosen to trust go daddy secure certificate authority-G2, the issuer of the server's security certificate "

I get this message when I want to connect to cloudgate / citrix

It is connecting through a Citrix Receiver but that should be irreverent as the certs are installed through Firefox and are handled, and Firefox is the application displaying that the CA is not trusted.
I guess what I'm getting at is for some reason the CA is not trusted, how do I force Firefox to realize that the CA is trusted even though I have installed the Root cert already. I have contacted Citrix and they said this is not their issue, HP has no idea why. The last party I have not contacted is Firefox. Maybe I'm just grasping at straws here?

You have not chosen to trust "VeriSign Class 3 Secure Server CA - G3", the issuer of the server's security certificate.

Trying to logon to company's with remote desktop to Citrix. Cant get past this...

Try This to fix it:
http://support.citrix.com/article/CTX108800
I got the error when the SSL Cert of the portal was renewed.

Error TTB1: You have not assigned business partner B1000 to a customer

Hi,
When trying to post the costs of a forex transaction we receive this error message: You have not assigned business partner B1000 to a customer ; Message no. FLBP116. When posting these costs (on a P&L account) we go through a finance interface to derive a CO object (network activity) from PS. Strange thing is that we don't have this error in Dev or QAS but only in acceptance which is a copy of prod... The interface works fine for costs from guarantees and L/C which goes to an other network activity in PS.
Any recommandations on this? The BP functionality has never been used befor by my customer.
Thanks in advance, and this a week befor possible go live...
Hans.

Update in PS was needed...

I want to de-install mac-excel test version and get the error message: you have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. I am sysadm

I want to de-install mac-excel test version and get the error message: 'You have not the privileges to de-install. Please login with the Mac-OS account you have installed mac-excel originally'. I don't know this account anymore. Possibly it does not exist anymore. anybody out there who can help ?

Hi, I may suggest to activate the root account and try the uninstall process from that account. To do so, you have to:
Go to System Preferences a open up the Users pane;
On the left side of the pane, you shuold see Login Options;
Enabled editing option clicking on the lock (it will ask your password);
Once the pane is enabled, you should see something like Server Account Network (sorry my OS is in italian, so I don't exactly know the right translation), and right next to it a button;
Click on that button, and a new pane shows up. Click on Open Directory Utility, and on the upper bar of OS X click on Edit;
Select Enable Root Account (you can set a password, or not);
Done that, you should log out and when the login window show up, type on the user field "root" and the password you choose;
Theorically, from this account you will be able to unistall the application.
After completing your task, I reccomend you to disable the root account, just by loggin in your personal account and repeating the steps I described before. Hope it helps

TBB1 Error as "You have not assigned partner to the customer"

Hi All,
when running TBB1 for a transaction we are getting the error as "You have not assigned "X" partner to the customer". Did anybody face the issue like this may share the inputs. Thanks.
Regards,
S.Sumana.

Hi Jasmine,
I have created two BPs (example BP 1 and BP 2) and I created two transactions (TM01) under each Business partner. The issue regarding "Assign customer role to BP" is coming only with respect to transactions created under BP 1 while running TBB1 for the particular transaction.
The TBB1 run for the transactions created with the BP 2 is absolutely fine.
I want to know what is the dfference between the two Business partners and what is it that driving the error "Assign Customer Role to Partner". I tried to find the differences between both the partners but apparently couldnot find any. Please help. Thanks.
Regards,
Sumana.

Security certificate was issued by a company you have not choosen to trust.

This issue is new to our client that is running Outlook 2010 (on a Win 7 machine) and connecting to an Exchange 2007 box.
There is only one Exchange box. I have tried the suggestions with assigning the certificate to the “Trusted Root Certification Authorities” area.
I have launched the “certmgr.msc” and see the “mail.domain.com” certificate listed.
I deleted and readded it as well. We have a signed 3<sup>rd</sup> party certificate that does not expire until 2016.
I have uninstalled and reinstalled Outlook 2010 on the machine.
I have also unchecked the “use Cached Exchange Mode” in the “Change Account Settings” area.
I have been searching for a solution for this for two weeks now.
Everything I have read has to do with Exchange 2010 and Outlook 2010 working together.
I have attached the error, I’m sure most that are reading this have seen it.
I’m not sure if there is a setting I’m missing on the machine, or what is going on.
Thank you to all that have read this. I look forward to additional advice for a solution.

Wendy,
Thanks for the reply. I have tried this solution multiple times.
I have added the certificate to the trusted root authority.
I was still getting the issue. I then removed the certificate from the certificate management console.
I then followed the directions again, and checked to make sure the certificate was listed under the “Trusted Root Certification Authorities store.”
Please let me know if you have any other suggestions.
Who issued this cert? What 3rd party? You shouldnt have to do anything for a trsuted 3rd party cert unless something is messed up on the certificate chain.
When you click on the View Certificate, is it the correct 3rd party cert?
Andy,
The 3rd Party is Go Daddy. The cert is good until 2016. When I cick on view certificate it has the correct issued by name and valid from dates. The only error is "Windows does not have enough information to verify this certificate."
When I click on the Certification Path the box at the botton "Certificate Status:" has a note "This certificate is OK." Please let me know your thoughts on this.

GO-ITEM - WHEN-BUTTON-PRESSED - SQLAP-10048 - You have not selected a record.

Hi,
I need to use go-item -> execute-trigger(when-button-pressed) personalization in oracle EBS Payables module. However i face certain problem.
When i do 'go-item' to particular 'button', row selection disappear(its a multi row block). In the result i receive an error - 10048 - you have not selected a record.
Manually you just click a button with row selected, and everything goes fine. There must be some kind of a context parameter which is passed from a block/record/row to a button. However how to achieve this through personalization?
Many thanks for every help.
Best regards,
Martin

write a procedure in forms that disables all your items in that record and call this on When-New-Record-Instance and When-Button-Pressed.
PROCEDURE disable_item IS
BEGIN
IF :<block>.indicator = 'X'
THEN
SET_ITEM_INSTANCE_PROPERTY('<block>.<item>, CURRENT_RECORD, INSERT_ALLOWED, PROPERTY_FALSE);
SET_ITEM_INSTANCE_PROPERTY('<block>.<item>, CURRENT_RECORD, UPDATE_ALLOWED, PROPERTY_FALSE);
.. (repeate this t2o Statemnts for every item,
more elegantliy you may write a loop using built-in NEXT_ITEM to get all items and set insert and update off) ...
END IF;
END;
On When-Button-Pressed set the value of :block.indicator to 'X' before calling the disable_item procedure.
Attemtion: This solution assumes that the button is part of your MR block (cited bove as <block>).
... and code is just written down, not tested.

You have not defined CO account assignment for an account that is relevant

Hi All,
While psoting the billing doc to accounting it is giving error as:
You have not defined CO account assignment for an account that is relevant to cost accounting.
Please let us know about error and which team and where we configure that?

Hello ,
one of the G/L accounts for which you have specified in revenue accoutn determination (T code -VKOA) has a setting which requires assignment ot a CO object.
check for the g/accounts detremined, goto FS00 enter the g/l account and the company code
Click on the Edit cost element tab. chcek the entries there, if ther is a entry it means cost assignemtn is reuqired
check with the FICo consultant , if this is really requried and what is the object desired.
based on that , you can have the object , if it si related to sales order then WBS element, internal order etc can be input
Hope This helps
Thanks
akasha

You have not signed on to the required Applications Database

I have a user who is trynig to use ADI to upload a journal from Excel.
She receives an error stating "You have not signed on to the required Applications Database"
Any suggestions?
Edited by: user573238 on Nov 5, 2008 8:29 AM

Thanks for your reply. I read that article. At this point I've tried lots of things to get this to work. This user has multiple ORACLE_HOMES on her PC, with different Oracle versions.
I think the user did try creating a new spreadsheet and pasting the data into it and it did not work. At the time I was not familiar with the Windows Service and the DBC directory with the DBC files in it.
I have copied the files to each Oracle_Home so my next step may be to have the user try using a new spreadsheet and using the cut-paste option.
If I get something to work I'll try to update this thread with what I learned.

Error in LSMW for new matl-You have not fully maintained the descriptions

Hi Experts,
I am creating a LSMW to create a new material master, but at the end part get the error "You have not fully maintained the descriptions" Message no. MG171. I am using the Standard batch/direct input" and Program Name RMDATIND.
Can you please help me.
Thanks and Regards,
Amol Kale

Amol,
as description is mandatory field while creating material, you need to assign description text.
also check are you maintaining multiple langauges during this material xreation , if yes, you need to give discription for all langauges.
hope it will help you.
Thanks
Ritesh

When trying to sync my iPhone with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges??

When trying to sync my iPhone/iPad with my MacBook Pro, I receive the error message "You do not have enough access privileges to update this device". How to I adjust the access privileges?

Hello magestecal,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you're getting a permissions error when trying to sync your iPhone, I'd like you to please follow the steps in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Take care,
Alex H.

Error 1476: You do not have the rights to perform this operation

My problem just started this week. On certain users, or workstations I
try and remote control. RC tries to authenticate, but then the error
message in my subject line comes up.
I've checked my RC policies for users and the desktops, and haven't
changed anything. It will work for suer a, but not user b even though
they both have the same policies associated with them. (same for
workstations)
The only thing that has been done recently are the DST updates. I have
tried updating Console1 but that did nothing.
Any help would be greatly appreciated.

Gwsorrells,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

SSL Error 61: You have not chosen to trust "GeoTrust SSL CA - G2"

Similar Messages

Maybe you are looking for