SSL error occurred, secure connextion cannot be made
Hello everyone,
I was trying to put a picture online on my blogger-blog with MarsEdit when I got this weird error: An SSL error has occurred and a secure connection to the server cannot be made.
When I checked MarsEdit net-log, there was an URL: https://www.google.com/accounts/ClientLogin
If I go to this URL with Firefox, no problem, I get a standard error-messag: Error=BadAuthentication
But if I go there with Safari, I can't reach the page at all. So, something tells me I have some network-problem or ssl/identification problem somewhere into my OS, no?
Any idea of what I can do against that? Anyone?
Thank you for your answers.
Cyril
I had this happen a while ago too when I switched development machines, but I was able to submit it from a friend's house, so I'm pretty sure it is my ISP but this should not be a problem. I am trying to push out another update and I'm having the same problem again. I would be very happy if there was a permanent solution to this problem.
Similar Messages
-
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found.I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found. -
Error occured, your complaint cannot be created
When am trying to create complint from ICSS am getting the following error:
"error occured, your complaint cannot be created" how can i know where it went wrong.
how to debug it. Please mention step by step as my abaper dont know how to debug/activate external application like icss.
Thanks,
priyaYou can debug the ICSS application the same way as you would the e-Commerce application.
Please reference the [Development and Extension Guide |https://websmp210.sap-ag.de/~sapdownload/011000358700000469462006E/]in section Activate ABAP debugging / Java debugging too
You may also want to look at [Note 1154496|https://service.sap.com/sap/support/notes/1154496] - Setting up and running Java debugging
that includes a good PDF document as well. -
Hi
We are trying to do an Security groups import using LCM, but getting the following errors and the accessing permissions are not updating.
Errors occured during syncrhonization: [com.hyperion.planning.HspRuntimeException: Cannot delete the following users: [username]., com.hyperion.planning.HspRuntimeException: Cannot delete the following users: [username].
These users have left the organisation. We've tried removing them manually from the SQL repository, but still the error persists. Can anybody help?
Cheersuser964802 wrote:
Hi
We are trying to do an Security groups import using LCM, but getting the following errors and the accessing permissions are not updating.
Errors occured during syncrhonization: [com.hyperion.planning.HspRuntimeException: Cannot delete the following users: [username]., com.hyperion.planning.HspRuntimeException: Cannot delete the following users: [username].
These users have left the organisation. We've tried removing them manually from the SQL repository, but still the error persists. Can anybody help?
CheersWhen you say you manually tried to remove the user from the repository what did you do.
Cheers
John
http://john-goodwin.blogspot.com/ -
IT0008 error "Required screen change cannot be made" PG015
Hi Experts,
Need your valuable inputs to sortout the issue. When i try to maintain the record IT0008, system throughs an error that "Required screen change cannot be made" and when clicking that waring it contains message no. PG015. Could somebody guide me to resolve the issue.
Thanks & Regards
SatyaThanks Ameet,
There was a change done by someone in the feature P0008, they have maintained company code and the return value as 08. If I remove this company code, there is no error in the IT0008 when record is getting created. Otherwise the error is coming. Could you please let me know the significance of this Featur assignment in V_T588M table.
Thanks & Regards
Satya -
When I open Firefox and go to my wordpress web site to create a new blog, I cannot upload photos as an error message appears IO Error.
I can upload in IE and Google Chrome. This problem has only just started happening in Firefox for some reason.
Please help?In the address bar, type '''about:crashes'''<enter>.''' Note:''' If any reports do not
have '''BP''' in front of the numbers, click it and select '''Submit'''.
Using your mouse, '''mark''' the most '''resent 7 - 10''' crash reports, and
'''copy''' them. Now go to the reply box below and '''paste''' them in.
Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift><br> ''(Mac Options)'' ''' key, and then starting Firefox. Is the problem still there? -
Hi,
I have a Portal install with the following specifications:
OS - Sun Solaris 2.6
DB - 8.1.7.0.0
iAS - 1.0.2.2
Portal - 3.0.9.0.7
It was working fine. Then the initjvm.sql that installs the JVM
in the database was run. This was done as part of the steps
required for enabling the UTL_SMTP. The script ran without any
errors but after that Portal Login was failing with the following
error:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
and there were no Java classes present in the Portal or SSO
schema. To overcome this error I reloaded the SSOHash classes to
Portal and SSO schemas and ran ssodatan. The script ran
successfully and I was able to login to the Portal after that.
However, if I login as the administrator and try to create or
edit users from the Administer tab of Portal, the same error
occurs again:
You cannot login because an error occurred while retrieving the
login URL. (WWC-41441)
I can programmatically add users using the Security APIs.
The wwsec_enabler_config_info$ table of the Portal schema
contains one row but the wwsec_enabler_config_info$ table of the
SSO Schema contains no rows.
This install of Portal is hosting a number of applications and as
such running opca again is not an option.
Any workaround for this?
Thanks,
RupeshHi,
I ran ssodatan again and got the following error:
ERROR: Setting Login Server Partner App
ORA-06508: PL/SQL: could not find program unit being called
I then found out that the wwsec_sso_enabler_private in the SSO
schema is invalid and this was causing the above error. I tried
recompiling the package but got the following error:
Errors for PACKAGE BODY WWSEC_SSO_ENABLER_PRIVATE:
LINE/COL ERROR
151/6 PL/SQL: SQL Statement ignored
151/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
151/20 PLS-00336: non-object-table "SECI" illegal in this
context
160/4 PL/SQL: SQL Statement ignored
643/6 PL/SQL: SQL Statement ignored
643/13 PLS-00320: the declaration of the type of this
expression is incomplete or malformed
643/20 PLS-00336: non-object-table "SECI" illegal in this
context
LINE/COL ERROR
651/4 PL/SQL: SQL Statement ignored
713/4 PL/SQL: SQL Statement ignored
713/50 PLS-00382: expression is of wrong type
745/3 PL/SQL: SQL Statement ignored
746/10 PLS-00389: table, view or alias name "ENBCONFIG" not
allowed in this context
The same package in the Portal schema is valid. Will an
export of this package from a working instance and an import into
the above instance solve this problem?
Thanks and Regards,
Rupesh -
HELP
Help needed to update a 4th gen ipod touch running version 4.3.5 (8L1) to the latest 6.0 version. When I connect and try to update i keep getting a box which states that a connection error occured and I cannot update.
I have been given a new laptop for xmas which runs on windows 8, and the new itunes version (which is in itself a hurdle as I am a technophobe!) and this is all becoming a bit fustrating.
I have connected, updated and synced my iphone successfully, but just hit a brick wall on the ipod. (which incidentally maybe where this laptop will end up!!)
Help if you can, but in laymans terms.......Thank you for you input so far.....
I think we are getting nearer to the solution sort of!
Let me get this straight...... I have paid for content on itunes, bought the apple devicds in order to play said content, now I have to subscribe $25 for the privilage of playing MY library content on MY other devices. Which wasn't such an issue to do before the new and improved itunes version!!
Have I got that correct. I think I cannot associate my other iOS devices with my library because I am unwilling to pay further through the nose!!!??? or am I missing something?
Thanks
Frustrated even more now!! -
During an update for Numbers an error occurred while I was away from the computer. I then got a message that an error occurred during Numbers update and to go to purchases to correct. Went to purchases and it shows that an error occurred but I cannot get any response to attempted commands. Any suggestions as to how I can get my Numbers application to update?
When I selected Purchases at App Store the screen showed:
(Ccmmands shown)
Keynote May 30,2014 Paused 0 bytes of 434 MB Resume
Numbers May 30,2014 Installed
Pages May 30,2014 Installed
OSX Mavericks May 29,2014 Download
When I selected "Check for Unfinished Downloads" on the store pulldown menu it produced message "All purchases have been downloaded", the "paused" on Keynote line disappeared, and the "Resume" changed to "Installed."
I installed Mavericks update 10.9.3 on May 30, 2014, and 10.9.4 on July 8, 2014, with no error messages, just "Installation completed." The last previous updates of the 3 apps was May 13,2014, also with no error notice. Everything seems to be working as far as I know, so do you think I need to do anything? -
SSL error after server updated certificate?
I posted about this elsewhere:
http://discussions.apple.com/thread.jspa?threadID=449770&tstart=0
but the basic problem is that my imap server updated its certificate (the old one expired) and now I cannot read email at all from Mail. I can definitely still read email from other apps (e.g. Evolution on Linux), but Mail.app seems permanently hosed.
When I click on the little !-inside-triangle-inside-circle I get a message that says:
The server error encountered was: An SSL error occurred while trying to read data from the server. How can I find out more about what's going wrong and more importantly, how to fix it!?
Powermac Dual 2.7 G5 Mac OS X (10.4.6)Actually, I was referring to the next subject in the Help list:
(I'm quoting)
Importing a personal certificate to use with Mail
Mail can encrypt email messages using the Secure Multipurpose Internet Mail Extension (S/MIME) standard for sending and receiving encrypted mail, verifying the sender's identity, and ensuring the message hasn't been tampered with.
You need a personal certificate to be able to sign and encrypt email messages. Certificates are issued by certification authorities, such as Thawte and VeriSign. The personal certificate may also be called a "secure email signing certificate," "digital certificate," "Certificate Authority key," "private key," "digital ID," "secure certificate," or a ".p12 file."
To get a certificate, first go to the certification authority's website, and create an account. Then request a certificate. You may need to pay for the certificate service. You can use Safari 1.2 or later to download certificates.
Certificates are stored in Keychain Access on your computer.
To import a personal certificate:
Double-click the certificate file you receive from the certification authority. Keychain Access opens and imports the certificate.
For Keychain Access to recognize a certificate file, it must have a file extension that indicates it contains certificates. Some examples of file extensions are .cer, .crt, .p12, and .p7c.
If Keychain Access does not import the certificate, drag the file onto the Keychain Access application icon, located in Applications/Utilities.
If you still can't import a certificate into Keychain Access, the certificate may have expired or the certificate may not be valid. Check with the certification authority.
You need a certificate for each of your email addresses. If you want to use the certificate on another computer, find and copy the original certificate you downloaded from the certification authority and move it to the other computer. Double-click the certificate file to open Keychain Access and import the certificate to that computer. -
SSL Error when logging into Jabber
In order to chat with my friends that use GoogleTalk, I have to use the Jabber part of iChat AV 3. Every time I try to log in, it says "An unexpected SSL error occured. [-9843]" I have searched the Support site and cannot find anything to address how to fix this. Any suggestions?
On another note, using my .mac account to try and voice chat with iChat AV 3, I am constantly getting the error message. "Insufficient bandwidth to maintain conference."
Any help would be appreciated!Welcome to the Apple Discussions, Sara!
For the GoogleTalk issue, it is being addressed by Google and is a known issue at this time. Expect a fix in the next few days or so.
With the Insufficient Bandwidth message... are you connecting to another iChat user or an AIM user? If iChat, make sure that person is using the latest version of iChat available. Also, make sure your bandwidth up and down is sufficient (which it should be) by going to http://testmy.net and clicking "Download Speed." Report the results back here.
-Ryan -
An Unknown error occurred while printing
Product Name and Number: 3052A -=All-in-One Printer J611g
Windows Vista 32-bit
An Unknown error occurred while printing
No changes made to the system. 2 other HP printers hooked up to computer just fine, no issues, but the printers were not working due to age, etc.
I just bought this printer last night, and cannot believe the issues I am having trying to hook it up, and getting it running. I have been doing everything suggested to me, and things still keep happening that I cannot print yet!!
"An Unknown error occurred while printing" is the message I am getting when trying to print an invoice. I have uninstalled the printer, and reinstalled it, and at that time it showed everything to be working.....CD downloaded good, and the USB cable was connected correctly. I have run a HP Diagnostic, and all of it showed green check marks by everything. I have done HP updates, have done window updates, and I have NEVER had this kind of an issue with hooking up a HP Printer. Is it because it is for wireless also, and I do not have that hooked up at this time? Do I need to return/exchange this one for another HP Printer? I am really confused, need to get these invoices printed for customers, and what am I suppose to do? I really don't have time to sit around too long, and wait for solutions to this issue.Hi ShopGirlKL,
Use the following utility to resolve the error message while printing.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&cc=us&dlc=en&lc=en&...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution" -
*Error occured while working with configuration (scanning)*
Hello Experts,
I am unable to open any of the java tools (config tool, Visual admin tool, NWA) and even web channel.
when i try to connect to DB through Config tool, I get the error as
Error occured while working with configuration (scanning)
Msg: Error occured: Secure store lib Dir does not exists
,hostname>\sapmnt\<SID>\SYS\Global\security\lib\tools.
After restarting the server it works but the next day the same problem appears.
Our environment
Application :CRM 2007
Os:win 2003
Db:Mssql 2005
Could anyone help me analyse the root cause and fix the issue.
Thanks & Regards,
Ajay Kumar.Hello juah,
Thanks for the reply..
uninstalling antivirus server it is working fine, I think antivirus is stopping that server service.
But with antivirus same problem appears every day. should i edit bootstrap.properties and change the location of the libraries from
xx\sapmnt\J2E\SYS\global\security\lib\tools to C:\usr\sap\J2E\SYS\global\security\lib.
Regards
Ajay -
Error occured in Template Configtool
Hi All,
When i am launching the Template configtool i am getting the error
(i.e) Error occured while working with Template configuration ep use type
Msg:Error occured Secure store Lib Dir does not exist \SID\SYS\global\security\lib\tools
I have seen the path mention there are .jar files existing
Plz resolve this issue
Regards
JayHi ~
I find the solution.
In a Netweaver 7.0 ehp2,
templateconfig tool's properties is below directory
/usr/sap/<SID>/JC10/j2ee/templateconfigurator.properties
I change GLOBAL_SAP_SHARE_DIR property value in the file
$=/usr/sap/EPD/SYS/global/sapmnt > $=/usr/sap
then error solved!
thanks
Maybe you are looking for
-
When signing in for updates on my Iphone, a different email address comes up than my Apple ID. Is there a way to change this on my phone? The Apple ID I use to sign in to Apple is the correct email address.
-
Maximum upload of 100MB/s on Thunderbolt to Gigabit Ethernet Adapter
I recently got a new Macbook Pro and also switched internet providers to get a 500/500 fiber optics connection. When I connect via wifi I reach speeds like 350 MB/s down and 250 MB/s up. When I do the same test via the thunderbolt cable I get 498 MB/
-
Save Environment. Save Yourself. Hi Experts!! I am very new to Adobe forms and am doing hands on using some tutorials. However, though I searched a lot, I didn't get help in some points. 1. What is the significance of Accessibility in Palettes? When
-
SPAM/SAINT update error patch 23 - 640
Hi: I´m recieving the following dump when updating SPAM/SAINT patch 23 under 640: Syntax error in program "SAPLOCS_UI " Error in ABAP application program. The current ABAP program "SAPLSPAM" had to be terminated because one of the statements could no
-
Lightroom 4.3 and Photoshop CS5 Crashing
For several months, I have been trying to troubleshoot random blue-screen crashes when (and only when) using Lightroom 4.3 and Photoshop CS5 in Windows 7 64-bit. The Windows stop error code is always 124 (hardware related). The crash dump files hav