SSL for pop3 or imap4 - not working.

Hi,
I was searching entire forum and couldn't find any information how to resolve my problem.
Environment:
GWIA Version: 8.0.3
Linux SUSE 11.2
In ConsoleOne in properties of GWIA I can't find fields for uploading SSL certyficates and network settings.
When I using switches of gwia.cfg file nothing with ssl won't works. I can disable or enable POP3, IMAP4 but nothing else. In logfile nothing, any error.
Certyficates was genereted by tool on this forum (file names in format 8.3), additionaly I was trying to set external signed certyficates in pem and pfx format with password and no. Nothing works :(
Thanks for any ideas.
BR
Grzegorz

gostrogorski wrote:
> SOLUTION I made soft link (ln -s) exactly from domain path to
> "/path/to/somewhere" (from error) and after that the tab "GroupWise" appears.
Nice solution! The GWIA is the one object that seems to be fussy about moving
to Linux, especially if you aren't using NSS, and there are file case issues.
Danita
Novell Knowledge Partner
Are you a GroupWise Power Administrator? Join our site.
http://www.caledonia.net/register
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...

Similar Messages

HT1947 Remote for ipad landscape orientation not working in ios 7

Remote for ipad landscape orientation not working in ios 7

See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure.

My dvd slot for imac10,1 does not work. It rejects the disc. Problem after reinstall of backup from hdd.

My dvd slot for imac10,1 does not work. I had a new harddrive installed in November and the MacStore installed my backups from an external harddrive. I do not use it other than to upload programs, so I have not tried using it until tax season, but it rejects the disc. The ata file indicates no dvd firmware, but the serial-ata does indicate firmware for a dvdrw. What might I do about this to bring the dvd back, least expensive to most?

Yesterday I started having the same problem. Can read disc (play movies and music) but blank disk are ejected or idvd cannot see the blank disk. I have a almost 12 month old 27" i7 imac.

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

I want to reset my ipod touch 4th gen but i have forgotten the restrictions passcode and for some reason its not working on my laptop on itunes and the restore thing wont work! any help?

Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...Re-Sync your Content
Note:
To remove a forgotten Restrictions passcode you will need to Restore the Device as New...
OR... From a Backup created Before the Restrictions Code was set....

Auto To working for one material and not working for other material

Hi,
Hope everybody is doing fine.
I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
I didn't setup the back ground processing job. Is that is affecting it?
thanks for any help.
regrads,
KHAN

Thnaks,
You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
Appreciate your time charlie

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

Link for territory mgmt is not working

Hi All,
We have territory management configured for three custom attributes.
Link for territory management is not working for territory assignment block on account overview screen.
Any hint how we can solve this issue?
Thanks and Regards,
Gauri.

How are you resetting the password?
Resetting User Password in Lion, Mountain Lion & Mavericks
Boot into your Recovery Partition by hold down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

Can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?p

can't get to settings to turn on wifi because "sign in to icloud" pops up and asks for pw which does not work because i can't get to wifi ?

The problem is I cannot turn on wireless setting. The "sign in to icloud -- enter appleid password" popup will not go away. when i enter the pw and click ok, the same balloon pops up again. If I click "cancel" it pops again. Since I am not on the internet (because I cannot turn the ipad wireless on) the sign in to icloud obviously will not work. Vicious circle.

Valuation Basis for Different Payment (BWGRL) not working in 2010

Hi
We have a commission wagetype which we entered in IT 2010 in Number/Unit field.
Since we don't have premium id available, we used "Valuation Basis for Different Payment (BWGRL)" to enter the RATE.
This RATE is not working during our payroll run, however when we are using the wagetype with premium ID it is working fine.
My question is- What could be the reason that the Valuation Basis for different payment is not working ?
I checked the wagetype in V_512W_B table and it has the following configuration-
Current wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = 100
1st derived wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = BLANK
2nd derived wage type
Valuation Basis = BLANK
Statement/WT = BLANK
%Rate = BLANK
Would appreciate if the the fix could be provided.
Saurabh Garg

Hello,
I think in your case for commision wagetype you need to modify rule $930 to process the override rate from Infotype 2010 BWGRL field in case you are using the US standard schema.
The valuation basis table V_512W_D and rule $930 together will determine the valuation basis.
The default valuation basis comes from table V_512W_D.In case you want to override the valuation basis rate defined in this table,you need to maintain override rate in It2010 and accordingly have the logic defined in rule $930 for that particular wagetype .
Following is the sample rule definition for a similar scenario.
****(commision wagetype)
NUM= ANZHL Set
RTE= BWGRL Set
RTE?0      Comparison
      MULTI NRA Multipl.amt/no/rate
      SETIN X=NX Set variable split
      ADDWT *    OT   Output table
    =
      VALBS0     Eval.0.WT in 512W
      MULTI NRA Multipl.amt/no/rate
      SETIN X=NX Set variable split
      ADDWT *    OT   Output table
Regards,
Malathi V.

New Hunt Pilot for internal number is not working.

Hi support, I have a problem with the new hunt pilot number that created for internal use is not working. I had create 1 internal number (1090) for the Hunt Pilot number, and there are 2 hunt group member (9382 / 9387). These number will forward all to the mobile number 9382 will forward
all to 90176253579 9387 will forward all to 90133921295 Calling from 1941 to 1090 resulted failed but calling from 1941 to 9382 working and the call forwarded to mobile 90176253579. What might be wrong with the 1090 where i can't call that number from internal. From the DNA, it shows the call should reachable to the destination. I attached the DNA result for your reference.

Hi Mohd Afadzal,
Forwarding setting do no apply for Line Group members. As you mentioned that the Line group members
(9382 / 9387) are configured to forward all calls to their respective cell phones, this will not work.
You can use the HuntPilot's Busy or No Answer configuration to forward calls to an alternate number.
HTH,
Jagpreet Singh Barmi

Can we get reimbursed for apps that do not work

Can I get reimbursed for apps that do not work?

Hi...
You can contact iTunes support here and see if they will make an exception:
http://www.apple.com/support/itunes/contact/
They usually respond within 24 hours.
Hope this helps.

Earlier installed flash player for x64 yet still not working

Hello:
Over the past 6months flash player installed and it's a working program, then a update comes
along install that then you know it program stops working. I just uninstalled latest version as it was not working
I went back to dl.flash player square "beta preview, for windows X64. Not working.
Where,what is a user to do? I like learning from H.P. Learning which uses flash player so I really
need to get Adobe Flash Player working a.s.a.p.
thanks nedt

Hi, The Square is a beta version and still in testing. You need to Uninstall it if you want the latest released version.
Even tho you have a 64bit OS, you need to use the 32bit browser with any Flash Player version other than Square.
Download and SAVE to your Desktop the Uninstaller:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE to your Desktop the Installer(s)
http://www.adobe.com/products/flashplayer/fp_distribution3.html Use the EXE Installer for Win/IE and Win/plugin
Use the Administrator Account
Close all browser windows, disable any instant messengers in the system tray
Disable any realtime anti-virus
Run the Uninstaller and then reboot
Run the Installer(s) and reboot.
Reenable any that was disabled.
Test here with browser(s)
http://www.adobe.com/software/flash/about/
You can print this out to make it easier.
eidnolb

New Release QuickVPN client 1.4.0.5 for windows 7 does not work????

New release of QuickVPN client version 1.4.0.5 for windows 7 is not working properly.
We can not connect; instead we receive this message:
"Remote Gateway is not responding, do you want to wait?"
Dear Cisco,,,,
Your release is not complete; please correct issue and advise after it has been tested.
Rgds, EM

Hi, first disable this POLSTORE.DLL again in your QuickVPN-Folder. Then start in this folder IPSEC.MSC and than IPSEC.EXE. You should get from IPSEC.EXE the error above. If not, than any other problem you have. Follow all the hints here in this thread.
If you get the same error above, than enable this POLSTORE.DLL again and start the IPSEC.EXE. You get the full info what has been gone. And within the IPSEC-Window for Local Computer you may find this FREESWAN-setting.
B.t.w. before I went this way I did export and import the IPSEC-settings from the XP-machine, as it was hinted some posts earlyer. But the way I have gone, works also with manualy deleting the FREESWAN config. With the IPSEC.EXE it will new generated in any case.
When you start via QuickVPN you may monitor also what happens within this IPSEC for Local Computer. Press F5 to keep it aktual.
From time to time the connection gets only succeeded after the second and more times. I have a very slow UMTS Internet-Access.
Juergen
Adding: These effects, getting not connected, first and during the VPN-Tunnel exists, has not changed since the top-first Version of Quick-VPN.
Dear customer, be patient, don't care about these stupid messages, click again or when the connection allready has succeeded through the VPN-tunnel do what you did like to do.
...... and again, with which configuration-scenario do the guys at Cisco test and develop .....
Fortunately, I never was a Cisco partner, only a poor user ;)

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
Apple officially refurbished equipment is usually good quality. Surprising this has happened but you need to press on with complaints and try for resolution.

Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

don't know. what have you done to troubleshoot?

SSL for pop3 or imap4 - not working.

Similar Messages

Maybe you are looking for