SSL from Third party CA

We purchased a certificate from Equifax (geotrust). We have imported the certificate into our keystore and configured the server.xml to point to the keystore and alias for the certificate. When we restart the Tomcat.exe service we receive the error below
Dec 10, 2007 11:01:23 AM org.apache.tomcat.util.net.PoolTcpEndpoint acceptSocket
SEVERE: Endpoint [SSL: ServerSocket[addr=0.0.0.0/0.0.0.0,port=0,localport=443]] ignored exception: java.net.SocketException: SSL handshake errorjavax.net.ssl.SSLException: No available certificate corresponds to the SSL cipher suites which are enabled.
java.net.SocketException: SSL handshake errorjavax.net.ssl.SSLException: No available certificate corresponds to the SSL cipher suites which are enabled.
     at org.apache.tomcat.util.net.jsse.JSSESocketFactory.acceptSocket(JSSESocketFactory.java:113)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.acceptSocket(PoolTcpEndpoint.java:407)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:70)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:534)
Dec 10, 2007 11:01:23 AM org.apache.tomcat.util.net.PoolTcpEndpoint acceptSocket
WARNING: Reinitializing ServerSocket
does anybody have any clue as to what this could be. I have never worked with java security before. In a nutshell, how can we make the certificate we purchased from Equifax work within the java security?

It would help to diagnose your issues if you can set the system property javax.net.debug to the value all, for example by adding this option to the java launcher: -Djavax.net.debug=all. Then post the output.

Similar Messages

Can not receive emails from third party email accounts

Recently I started working for a small business which has small business server 2011 and exchange 2010 installed. Before I started there were eight user accounts and they all have unlimited email access. I created a few users through sbs AD and also from
exchange console a week ago. Unfortunately none of them can not receive emails from third party accounts. they all can receive internal emails and also can send mails to any email accounts internally and externally.
This is a night mare for me as new users are having trouble with communicating via mails. I have tried all the methods and now thought of posting this issue on tech net. Please help me on this!!
Thanks a lot!!
Sammy

Checklist for testing inbound email problems, I am assuming outbound emails works ok.
1. Check Port 25 forwarding on all modems routers/firewalls
2. MX Record is created and pointing to the correct Public IP Address, use MXToolbox.com to verify MX Record and test SMTP flow. Also Verify your public IP has not changed, use whatsmyip.org to check you public IP
3. If using POP Connector Service, make sure POP accounts are created properly
4. If using a 3rd party spam host, make sure they forward email to correct public IP address, use step 2 to verify your public IP.

DMS document migration from Third Party DMS server(Omnidocs)

HI guys,
I would like to migrate document from Third party DMS server to sap DMS server.
What is the apporach.
1. The thir party dms server is protected with login name and password.
How i can extract data from the software.
Please spread your thoughts on this.
what is the function module to download the contents of the server. by passing the url.
with regards
Giri

use ALE scenario to send the documents

Sender RFC from Third Party System

I have a vendor who is actually communicating through RFC from third party Application to SAP R/3. Now we are trying have XI in between. Where as with minimal impact on both sides.
Solution.
1. Have the RFC made as ZRFC in XI. Let the vendor call the RFC in XI ABAP and internally make an RFC call through XI Interface to R/3 as Sync Interface. Because we need to report the information back to the system where the request initiated.
2. Have RFC INI file copied as SAP Suggests under one of the folders. Develop the regular RFC to RFC Interface via XI.
Is there any other alternatives other than the above mentioned solutions? Or out of those 2, which one will provide the best performance
Appreciate any feedback. Please advice

That's exactly what we are trying to achieve here. By Eliminating direct connection R/3, we are placing XI in between. But with the budget/timeline constraints from the Partner side, we are trying to have minimal change on the partner side. They might not change something to web service etc...
Here is the text about INI file
You can configure the non-SAP RFC client to connect to the sender communication channel in the following ways:
■ By defining the parameters PROGID, gateway-host, and gateway-service within the saprfc.ini-file using RFC-SDK.
■ By using appropriate parameters in the function RfcOpenEx.
If you use the saprfc.ini-file, the respective RFC destination has to be of type R.
All the parameter values used within the saprfc.ini-file or with the function RfcOpenEx should match the entries maintained within the corresponding sender communication channel.
Example for the saprfc.ini-file is as follows:
DEST=RFCCLIENTEXT
TYPE=R
PROGID=P106646.HKExternalClient
GWHOST=pwdf2153
GWSERV=sapgw40
Please check the following link, for the same text on RFC Sender
[Help.SAP|http://help.sap.com/saphelp_nw04/helpdata/en/67/6d0540ba5ee569e10000000a155106/content.htm]
Using the same Sender RFC for non-SAP System, please share any ideas

Incoming invoice from third party system

Hi All,
Could you please help in choosing functional module or bapi or badi's for incoming invoices that are receiving from third party system. I have no ideal about that but the SAP has to be loaded using idocs. what is the reason to choose the above ones
Thanks in advance for response.

Why not starting with docu?
The general process is explained well in help.sap.com
As a service, put this into your Google: vendor invoice edi site:help.sap.com

Help me! How to use it as a web service from third party application?

After using JDeveloper to develop BSSV object e.g. JP550010, how to use it as a web service from third party application?
TKS！

Obviously the OP is working on a project for the Bead Society of Southeastern Virginia http://www.bssv.org. Oh, wait, maybe he's researching the Blueberry Shoestring Plant Virus http://abbreviations.yourdictionary.com/bssv
:D
John

I bought a macbook air and iMac from third party with preinstalled ilife and iworks

I bought a macbook air and iMac from third party with preinstalled ilife and iworks, can I update to the latest ilife and iworks without being charged even though i did not purchase ilife and iworks on my preowned Macs. I have no CD's or license for those products?
thanks

No, you will not be able to do that.

Optimization in SCM from Third Party Logistics-Business ProcessOutsourcing

I am compiling an exhaustive list of SCM Optimization touch points from Third Party logistics business process outsourcing point of view.
Based on your experience, could you list out,
1) Third Party Logistics business process outsourcing touch points in the entire width of SCM
2) KPI's to Measure and Optimize at each touch points.

Few KPI's
- On time Delivery
- Response time
- Quality of WOrk
- Costing
- Profit at 3PL

Accessing BW Query from Third Party System

Hi,
We have a requirement by which user can do the following through the third party system.
1. User will enter the Parameters in the third party system.
2. User will then call the BW Query with the above parameters from the third party system.
3. BW query should get execute based on the parameters (variables) and output to be displayed.
3. After displaying the output, the same should get passed into the db tables or the flat file to the third party system.
Ideal steps will be :
1. Enter the parameters in the third party system
2. Calling the query from third party system with the
parameters
3. Executing the BW query
4 Displaying the output and
5. Sending the output back to the third party system
Kindly advise how can we handle this scenario.
Regards
Ramesh Ganji

hi,
you can use third party etl tools. I used XtractIS for microsoft analysis services.
http://www.theobald-software.com/cms/en/xtract-is/xtract-is-plugnplay-mit-sap-und-den-ssis.html

Item master synchronisation from third party system to SAP

Hello ,
I would like to understand how we can desgin flow of data in case of changes in Catalog from third party system to SAP.
We have implemented Catalog functionality. Catalog maintained in third party system is accessed from SAP for procurement through catalog button.
Now we want to update SAP contracts when ever there is change in prices in third party system. In this we are also validating currency,UOM, delivery time etc.
How does we can make this synchronisation? What are the possible solution for this?
You valuable inputs will be highly appreciable.
Regards,
Prashant

Hi Neetu
you have to mainatin Item text and not for material PO text...
Do these settings:
SPRO->MM->Purchasing->PO->Texts for POs--->Define copying rule for item texts..
then check you should have a entry for "Item Text" if not then
Put a Consec no. and against it enter item text. then for this you have to maintain text linkage where u should have source object as Purchase requisition.
please confirm if these settings are already there?
regrds
yogesh

Data Extraction from Third party system to BW System issues...

Hi Experts,
I would like to know about data extraction issues from third party systems like hyperion or DB2 or Sysbase to BW system, proper procedure to minimise risk facors, etc.
I hope hear from you soon...
Thanks in advance....
Regards,
Nagendra KReddy

Hi,
Below is a document for DB connect. in that frequent problems also mentioned.
Create DataSource for DB Connect step by step
-Sriram

DATA EXTRACTION FROM THIRD PARTY TOOLS

Hi All
I want to Extract Data from Third party Databases in to BW. Can Some body give some Information Regarding that
I need to Spec the Interfaces for that
Any help Is appriciated By Points
Thanks
BW User

Dear Vasu,
Chk this:
http://infoframeworks.com/BW/SAP_BW_3rd_Party_Access_ETL_Tools.htm
Thanks,
Raj

Updating Serial numbers coming from third party at PGI

Hi all,
I have an requirement such that I need to update the serial numbers for a line item that are coming from third party system and these serial # needs to updated in the PGI processing of delivery.
I have searched in the SDN , but could not come these type of requirement.
Please any one call help me on this??
Thanks in advance
Ravindra

Hi Ravindranath,
To cater this requirement:
1. Create a Z table for storing serial numbers with the link to delivery (means there will be some link with the serial numbers coming from third party and delivery in SAP)
2. Go to change mode of include MV50AFZ1 for add code in subroutine USEREXIT_MOVE_FIELD_TO_LIPS.
3. In this subroutine fetch the serial number according to line item and delivery number; that you will get from LIPS.
Pass the serail number to ANZSN field of LIPS.
Hope it will solve your problem.
Regards
Krishnendu

Launching OA page from Third party application.

Hi,
We would like to launch an existing OA framework page from third party system. We do not mind entering the user name and password if prompted.
Following URL have been tried by us ... with no success.
http://tru-64.ashokleyland.com:8050/OA_HTML/RF.jsp?function_id=22195
&ImcGenPartyId=123&ImcGenPartyName=abc&OAHP=IMC_NG_MAIN_MENU
&OASF=IMC_NG_ORG_OVERVIEW
http://tru-64.ashokleyland.com:8050/OA_HTML/OA.jsp?
OAFunc=IMC_NG_ORG_OVERVIEW&ImcGenPartyId=123&ImcGenPartyName=abc
&OAHP=IMC_NG_MAIN_MENU&OASF=IMC_NG_ORG_OVERVIEW
Error : You are trying to access a page that is no longer active
thanks
Yj

in Login page, get userid and pwd from user and use below query
String sql = "select fr.responsibility_key responsibility_key";
sql = sql + " from ";
sql = sql + " fnd_responsibility fr";
sql = sql + " ,wf_all_user_role_assignments waur ";
sql = sql + " ,wf_local_roles wlr ";
sql = sql + " where waur.user_name=:1";
sql = sql + " and waur.role_name = wlr.name";
sql = sql + " and wlr.orig_system = 'FND_RESP'";
sql = sql + " and wlr.OWNER_TAG='<ur custome>";
sql = sql + " and fr.RESPONSIBILITY_ID =WLR.ORIG_SYSTEM_ID ";
get the correct resposnsibility key then use below code
String sessionid = sessionBean.createSession(request, response, dbcFullPathName, userName, userPassword, appShortName, responsibilityKey);
String transactionid = sessionBean.createTransaction(sessionBean.mRespInfo[0], sessionBean.mRespInfo[1], sessionBean.mRespInfo[2], dbcFullPathName);
HMAC macKey = sessionBean.getMACKey(session);
String url = URLMgr.processOutgoingURL("OA.jsp?page=<PG url>&transactionid=" + transactionid, macKey);
Do all this in your custom JSP page. Once done then redirect to OA page using URLMgr.processoutgoingURL method.
Hope this will help you.
Message was edited by:
user566918

Return to depot - original order from third party location to customer

Hi,
A return order has been configured for materials which have originally gone from third party location to customer location. During return process however the material is coming back to the depot, not the third party location. Now while trying to create an excise invoice after posting goods issue, the material is not showing in the list of excisable commodities. Please suggest a solution.
Thanks,
Kasturi

There is no concept called third party returns in standard SAP. Check this link where the same topic was discussed
[Re: Return Of goods in Third Party Process|Re: Return Of goods in Third Party Process]
thanks
G. Lakshmipathi

SSL from Third party CA

Similar Messages

Maybe you are looking for