SSL - Installing Third party secure certificates

Hi,
I am having problem while importing third party secured certificates (Verisign).
In STRUST, after import It was still saying Self-Signed message for third party certificates. I am not sure weather this is correct behavior or not.
After launch browser, the certificate status showing with message
"This CA Root certificate is not trusted because it is not in the Trusted Root Certification Authorities store."
Please help me to solve this issue. Any other procedure we need to follow to import third party certificates
Thanks in advance
Regards
Srinivas

I'm guessing, you'll need to download the Verisign Trusted Root CA certificate from verisign.com and import it into your certificate list in STRUSTSSO2. Under the System PSE node.
If you doubeclick the response certificate from Verisign, you may be able to see what is heirarchy / trust chain for verisign certs. If it's more than just root, cert, you'll probably need to add the intermediate certs too. Check out verisign link, maybe it'll explain better.
https://www.verisign.com/support/ssl-certificates-support/page_dev028341.html
Also is the self signed message on teh SSL Server PSE node, or the server node? it shouldn't say self-signed if it's the (as example below) sapserver_sid_00 node.
SSL Server
   |_  sapserver_sid_00
Hope that helps.
regards,
Laurence...
disclaimer:
The content of this message is my personal opinion only and, the statements I make here in no way represent my employer's position on the issue, nor am I authorized to speak on behalf of my employer on this matter.

Similar Messages

  • Install third party certificate on MAC os X

    Hello,
    I have installed leport 10.5.X on my machine. I am new bie for MAc and want to install intermediate certificate for my domain from Digicert. I have registered from Digicsert. Please help me to how can I install on the machine. I also need to create a new certificate but when I tried to add it shows an error message like this.
    "There are no valid root or intermediate certificate authorities available to sigh certificates. Use the "create certificate Authority" option to create a certificate authority."
    Can anybody please help me to what should be the next step.
    And how can I install third party certificate.
    Thanks in advance.

    There is a product called VolumeWorks that is supposed to do this. I looked at the demo, but I could not get it to see the extra space so I ended up backing it all up and erasing the Raid and doing a block copy with Carbon Copy Cloner.

  • Third Party CA certificate requirement for Cisco expressway C and E

    Hi All,
    We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.
    We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As per cisco document we had ask to procure “Quick SSL premium single domain” CA certificate for Expressway Series E and C server but as per the certificate issuing vendor, the application required “Quick SSL premium multi domain” as they observed extra SANs in CSR generated from the Expressway C and E applications. Need help to find out application required certificate,  who are using Third Party CA certificate for MRA solution.

    First of all, I don't see how you cant get away with single domain certificate. I have looked into this more. This is because you need to add your domain name in the SAN as detailed below.
    Secondly, I am not sure where you are going to generate the certificates from..You should generate your CSR from here..
    Go to Maintenance > Security certificates > Server certificate
    NB: Customer’s service discovery domain is required to be included as a DNS SAN in all Expressway-E server certificates
    This is what the CSR page looks like

  • Problems installing third party software on Mountain Lion.

    I received message "Your security preferences allow installation of only apps from the Mac App Store and identified developers."  Where is this security setting so I can change it to be able to install third party software? "
    Thank you in advance.

    Open the Security & Privacy preferences. Click on the General tab. At the bottom you will find your Gatekeeper settings. Click on the lock icon and authenticate so you can change the selection. If software does not have a developer's signature in it then the software will not be installed until you change the selection to "Anywhere."

  • BlackBerry-8800 Cannot Install Third-party softwares

    Hi ... can anyone help me how to be able to change all settings (including password prompts), and install Third Party Applications
    I am unable to make changes to the settings or install Third Party Applications. I have a Blackberry that was previously connected to a company's BES. Actually, I purchased this phone 6 days ago from open market; i dont know about the previous owner.
    Please, Please, Please ...... someone help me
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    What Urumilton gave you was the ONLY procedure to remove an IT policy. A wipe will not remove the IT policy
    Your other recourse is to box up the phone and return to sender.
    Thanks
    Bifocals
    Message Edited by Bifocals on 01-18-2009 01:48 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Way to use Visual Web part in sharepoint 2010 without using/installing third party tools

    I want to know the way to use Visual Web part in sharepoint 2010 without using/installing third party tools.
    Please provide me a link where i can actually know how it is done.

    + to _eNo_,
    Visual Studio 2010 has support for visual webpart, you can find that under Visual C# node in the Installed Templates section (if your preferred language is C#)
    Hope this helps!
    Ram - SharePoint Architect
    Blog - SharePointDeveloper.in
    Please vote or mark your question answered, if my reply helps you

  • When installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?

    when installing third party software, how do I temporarily turn off the factory installed virus sw and firewall?  Is it necessary on a Mac to do so?  I come from the Windows world and am still in the learning curve on the Mac.

    Correct.  I have not installed ANY other software for anti-virus, etc.  I want to install a Synch app for my HTC phone to sych with MS Outlook 2011 installed on my Mac.    HTC will not synch with it otherwise.  That was really the basis for my question....if installing a non Apple app can be done without messing with factory settings on the Mac.  In Windows I remember that I needed to disable Norton and the Firewall in order for installation to occur. 
    Thanks.

  • Installing Third Party Audio Units

    Wonder if anybody can help. I have just bought a G5 Dual 2.3 and Logic Pro 7.1 I can not find any way of "installing" third party plug ins. I have checked the ones I have ( Waves Platinum for AU for OSX ) and they are valid for Logic 7. I have put several plugs in Applications , but they are not even appearing in Logic Audio Units Manager. Im probably missing something really simpe here. Im also having the same type of problem trying out "demo" versions of some new AU instruments e.g. X treme FX and MOTU MX4 Soft Synth ( that is appearing in Audio Unit Manager but will not open, so maybe its not valid for Logic yet?) Pleeeeeeease Help. Thanks. Paul

    Hey Paul & Welcome!
    I don't quite understand what you mean when you say you can not find a way of "installing".
    You should have installers for your AU's. If you doubleclick one of those, it should take you through the installation process. Apologies if this is what you have done, but I become a little suspicious when you say you have "put several plugs in your Applications folder". This is sometimes the right procedure when it comes to installing certain applications (e.g. Reason), but rarely or never the case with plug ins. You need an installer.
    Now, If indeed you have gone through the installation process, it is still possible that the plug in question won't show up as available. As you rightly point out, it may be rejected by Logics AU Manager.
    Check in your following folders:
    HD/Library/Audio/Plug Ins/Components
    and,
    Home/Library/Audio/Plug Ins/Components
    wich is were your AU's are supposed to be located.
    If they are not there, they are not installed. If they are there, they should be scanned by AU Manager and be validated or refuted.
    When you have checked the folders, you can open Logic and run AU Manager and check the status of your installed AU's. The ones that have failed or crashed can still be selected by checking the little box, with the risk of making Logic unstable. You will indeed get a warning every time you open logic, telling you how many failed AU's you're currently running.
    So, check for installers, check your component folders and cross reference with the AU manager.
    Again, sorry if this is at a beginner level for you, I could not quite make out where you're at.
    Good Luck!
    Erik

  • Installed third party applications not showing Application folder?

    Hi,
    i've installed third party application outside from AppStore. i chosen "Anywhere" option on Gate keeper. however its not proper installation process hence how can i install? if i install third party application which is get .DMG file from some one else and installed. if i install those application its not displaying inside the Application folder on my Mac OS X 10.8.3.
    Please anyone suggest me,
    Thanks in Advance,
    Suresh Balakrishnan.

    if i double click on Xcode icon, Xcode application lauched immediatly. however Xcode is not there in the Application folder.
    Because you didn't drag and drop copy the app into the Applications folder, so your running it from the DMG instead.
    A DMG is basically a disk image volume, like any other seperate hardware volume like a USB thumb drive, a external hard drive, or another partition, except it's virtual and based all in software.
    If you don't know your way around a computer you shouldn't be using Xcode to begin with.

  • Unable to install third party effects/titles. Missing folders in Motion Template.

    Hi. I am unable to install third-party titles/effects/generators in FCP X version 10.2. I navigate to my Movies/Motion Templates folder and there are no subfolders in there. I created new ones labeled "Titles", "Generators", etc and placed the complete folder of the third party effects in the appropriate subfolder, but the effects do not show up in FCP X. I am on a managed laptop and do not have Administrative control. I am wondering if because I have a user profile with limited installation control, could that be affecting my ability to add the effects or is there something else that is wrong? Any help would be greatly appreciated.

    Preferences do get corrupted rather often, and deleting them is usually one of the first thing one tries whenever something strange happens in FCP X.
    How exactly did you delete the preferences? The current method of choice is by holding down the command and option keys when starting the application and then confirming when the dialog box comes up.
    I have not tried running FCP X from a non admin user account. Whether this could be the issue, I can't say.
    Can you post screenshots of a Finder window, in column view, showing the folder structure inside Motion Templates?

  • How to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?

    how to install third party plug-ins from photoshop elements 11 to new 13 in my PC win7?
    Thank you.

    Hi ,
    Your windows is 32 bit or 64 bit .
    If win 7 32 bit
    Just copy the plugin from PSE 11 and paste it to PSE 13 plug-in folder.
    If win 7 64
    PSE 11 and PSE 13 are installed as a 32 and 64 bit respectively , so you need to install plug-in again.
    Thanks,

  • Does OSB10gr3 support third-party security providers?

    Does OSB 10gr3 support third-party security providers and third-party token handlers ?
    If so what are they?
    Edited by: dbr6 on Jun 26, 2009 6:01 PM

    OSB will work with any security provider that is designed as per http://download.oracle.com/docs/cd/E12840_01/wls/docs103/dvspisec/index.html. OSB completely relies on Weblogic security framework and doesn't do any official certification for third-party security providers.
    Cheers
    Manoj

  • SSL with third party certificate

    Hi All,
    I followed the configuration mentioned in the white paper
    Oracle Forms Services 10g: Configuring Transport Layer Security with SSL An Oracle White Paper July 2005 (frm10gss.pdf). That is working fine.
    I have a third party certificate (file format - .der, I got .cer from that).
    With this certificate i need to configure the Application Server 10g. For this certificate i didn't created certificate request and sent to the third party.
    In the steps motioned in the frm10gss.pdf where i have to make changes to include the third party certificate and not to consider the default oracle OCA certificate. Or with that Certificate how can i configure the SSL.
    Any suggestions please…

    Hi All,
    I followed the configuration mentioned in the white paper
    Oracle Forms Services 10g: Configuring Transport Layer Security with SSL An Oracle White Paper July 2005 (frm10gss.pdf). That is working fine.
    I have a third party certificate (file format - .der, I got .cer from that).
    With this certificate i need to configure the Application Server 10g. For this certificate i didn't created certificate request and sent to the third party.
    In the steps motioned in the frm10gss.pdf where i have to make changes to include the third party certificate and not to consider the default oracle OCA certificate. Or with that Certificate how can i configure the SSL.
    Any suggestions please…

  • Third Party Email Certificate

    Hi,
    I am in a project that using three java based application in a SOA.
    Those applications have some needs to send email to a third party user, who don't have email account in our domain.
    I've told to use email certificate to ensure the security, what I want to ask is, is there any need for every application to invoke the certificate (which I'm going to install in my mail server) to put it in every email send? or I just install the email certificate in the email server and registering my domain? I really need help on this, thank you.

    Either your code or the API will need to do the same as any other mail client and compose a properly signed and optionally encrypted message.
    In the case of a normal mail client, the user's certificate is stored somehow on the client. In highly secure environments, that certificate is stored on an ID card which must be physically inserted in a reader attached to the system sending the message. In that case, the actual signing is done by the card. A more common alternative is that the certificate is stored in a local DB and password protected. For example, Thunderbird keeps the user's certificates in a local file:
    * Tools->Options...
    * Advanced
    * Certificates
    * View Certificates
    * Import
    I do not know if the JavaMail API has any features to help you with this. You should ask about that in the JavaMail forum:
    JavaMail

  • How to install third-party SSD as boot disk in MacPro 5,1

    I had so much trouble with this that I thought I'd post a recipe that others could follow.
    The first thing you should know is that it's not possible to get a non-Apple SSD recognized in a sled slot of a MacPro 5,1.  It just doesn't see them at all, even if (as some suggested) previously partitioned as a GUID partition (which works in a MacBook Pro, but not a MacPro 5,1).  This is true even with the most up-to-date EFI firmware.  You're going to have to use a PCIe adapter card.
    The next thing you should know is that not all PCIe SATA3 SSD adapter cards are bootable on a MacPro 5,1.  For instance, even though the Sonnet Tempo SSD is advertised as working for a boot drive in a Mac Pro, it actually works in any Mac Pro *except* the 5,1.  In a 5,1 drives on the card do not work as boot drives, either with option boot or if you select it as the startup drive after booting from something else.  Also, EFI boot is extended by about a minute -- not the end of the world, but an annoyance.  The Tempo card does work well for add-on drives, its very fast.  I am pretty sure the Tempo Pro variant of the card also does not work, as the Sonnet support guys told me that they have to use use rEFIt for booting 5,1 MacPros in their lab.  I imagine if the Pro worked they would have pointed me at that instead.  (Note that rEFIt has been superseded by rEFInd, http://www.rodsbooks.com/refind/.  I didn't try using rEFIt or rEFInd because I found a better way, but if you want to dual-boot to Linux those utilities are apparently Da Bomb.)
    An Apricorn Velocity x2 Duo card *will* boot, and does not have a long EFI boot delay.  That card is a little more expensive than the Tempo SSD (but not the Tempo Pro SSD) but it works properly.  It's worth the extra money, especially since it's the only card I could find that explicitly claimed to work as a boot drive on a 5,1 MacPro.  And it does.
    One caveat: With the Tempo SSD the SSD drives were invisible until repartitioned in GUID format, which also happens if you try to use a third-party SSD inside a Macbook Pro.  I found that I could repartition one drive, a Crucial MX500 960GB, using a run-of-the-mill USB SATA2 adapter.  Unfortunately this solution did not work with a Samsung Evo 1TB drive, I had to use an external USB3 enclosure.  Moreover, the enclosure supported both FireWire and USB3 but FireWire did not work.  This FireWire issue might be due to the super-cheap enclosure I was using, so YMMV, but keep in mind that it's possible that you'll need either a USB3 expansion card in the MacPro, or a different Mac, to perform the initial repartition to GUID format.
    It's possible that SSDs would be visible on the Velocity card even before repartitioning, I don't know as both of my drives had been repartitioned prior to trying the Velocity.  So, it might work ... but you might need to partition externally.
    I don't know if pre-partitioning is necessary with the Velocity card, as I only ever tried pre-partitioned drives with it.  If you try the Velocity and the drive isn't seen, that's the problem and you'll have to use an external SATA adapter of some sort to repartition before installing on the Velocity card.
    After partitioning the drive and installing on the Velocity card, it worked fine.  Yosemite installed properly and with reboot it blazed.
    Next up, TRIM support.  For some reason known only to Apple, the Apple AHCI driver refuses to enable TRIM support for anything other than Apple drives.  It's possible that there are or were bugs in some of the early SSDs and Apple is just playing it safe, although I would have preferred to have the option to enable TRIM or not if that's the case.  Unfortunately there is no such option, you have to use a substitute AHCI driver.
    Unfortunately if you're using Yosemite you cannot use a substitute driver without disabling kext extensions, because Apple will not sign anyone else's driver (at least not at the time of this writing).  That's unfortunate, I would prefer to have signed extensions if I could, but realistically speaking you're no worse off in terms of security than you were with Mavericks so it's not the end of the world.  With a little luck Apple will either start supporting TRIM on third-party drives or starts signing third-party drivers sometime in the future.
    So: Before you can start TRIMming drives, you first need to run this command, or something like it:
    sudo nvram boot-args=“kext-dev-mode=1”
    I rather like seeing the boot process, rather than just the Apple logo, so I use this:
    sudo nvram boot-args=“-v kext-dev-mode=1”
    I tried both Trim Enabler (http://www.cindori.org/software/trimenabler/) and Chameleon SSD Optimizer (http://chameleon.alessandroboschini.com/).  As of this writing the Chameleon driver is more up-to-date, and comes with some additional utilities that are pretty nice.  Take your pick, though, both worked fine in my experiments.
    With a TRIM-enabled AHCI driver, kext signing disabled, a Velocity card, and your favorite SSD you are in business.
    The only weird thing after all of this is that non-boot SSDs on the Velocity card (or on the Tempo) are ejectable.  As far as I can determine there’s no way to mark them as non-ejectable.  That’s a minor annoyance compared to the performance you get out of the SSD, though.
    Because, with this stuff in there, yowza is the MacPro 5,1 a fast machine.  You Will Like It.  Enjoy!

    Then you should read these.
    http://forums.macrumors.com/showthread.php?t=1804704&highlight=sonnet+tempo+pro
    http://forums.macrumors.com/showthread.php?t=1721573&highlight=sonnet+tempo+pro
    This was strange but has to do with how startup disk and nvram interact
    http://forums.macrumors.com/showthread.php?t=1795765
    I think your problems were solvable and not that the Sonnet card and 5,1 is not bootable, in fact the 5,1 is easier, there are more supported cards.
    I have the 1,1 where the Sonnet Pro is recommended but for data only and are not bootable because of the 32-bit EFI firmware. NOT the 4,1 and 5,1. The 2008's are problem child and have a mix of PCIe 1.1 slots, first implementation of EFI64 that also has problems. Also the 4,1 has two PCIe 2.x slots 3 and 4 that share a controller but that simply limits bandwidth.
    I would have left the TRIM support and NVRAM changes in Yosemite to a separate thread if you wanted to focus on the Sonnet Tempo Pro support in Mac Pro 2010-12 5,1s.
    Also the make of SSD can vary and they also have their own firmware as do bootable controllers along with the EFI of the Mac, all of which have to work together.  Meaning it might be that Samsung 840 va 840 EVO vs 840 Pro will all be slightly different but my experience is Samsungs work well (as do others like Crucial with the proper firmware - and there was/is an issue with the firmware of the Samsung 840 but not with booting).
    The PCIe card gets seen and treated as external and therefore 'eject' but of course you can't when it is the system boot drive.
    One thing I found last week and meant to mention:  After installing or changing PCIe cards, RESET SMC made all the difference in the world with the long boot delay. Some PCIe cards will add a few seconds, system has to search the device tree which now shows another controller with multiple devices - and sometimes NVRAM and SMC are what I will call "dirty" and need to be rebuilt and reset.

Maybe you are looking for

  • Split PO in SRM

    Hi, Is there a badi to split the PO in EBP based on a cutom field in the shopping cart? Thanks, Kumar

  • Apple graphics card vs flashed graphics card

    My old Apple Cinema Display went down today, and I had to buy an Apple Cinema LED 24" display with a mini displayport connector. Do the Apple cards show the gray Boot Screen through the mini display port? I'm am told the flashed cards will not show t

  • Multiple content databases and Project Sites

    Hi, I am in the process of migrating our Project 2007 PWA + Project Workspaces data to Project 2010.  Our PWA site and the Project Workspaces are in a single content DB (2007) and I am trying to work out what I should do when I migrate it.  Our conte

  • My iTunes library shows no songs

    Until a few days ago my library showed close to 1,000 songs, now it appears empty. I know the songs are in my computer but iTunes can't seem to access them.

  • MAIL - ERROR message using aapt sending mail

    I am using Apple Mail with an aapt.net.au email account. When I am at home using my wireless internet connection through an ADSL landline I have no problems. However, when I travel and make use of others wireless connections eg at an airport or at my