SSL Network Extender Service is Down and could not be started

I'm trying to use a VPN access from work, which worked fine in XP but with vista the SSL service won't start.
Any ideas?

Hi,
Before moving on troubleshooting, could you please let me know if you are using Checkpoint client?
If so, the problem is a known issue on Checkpoint’s side.
Checkpoint suggests update the ActiveX component in IE's Manage Add-On section to resolve the problem.
If the issue still persists, I suggest you contact Checkpoint support to address the problem.
Support Programs and Plans
http://www.checkpoint.com/services/techsupport/index.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it helps.

Similar Messages

HT1766 After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

Hello Wilson@w,
The article linked below details the process of placing your device in recovery mode in order to complete the update.
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen

Phone shut down and could not charge screen is empty

Phone was shut down and could not charge /screen was empty

Reset the device by pressing and holding the home and power button until the white Apple logo appears.

How can I remove the autorization from my old computer when it is broken and can not be started?

my old computer has broken down and therefore I got a Macbook. Then I wanted to synkronize my iphone with Itunes but i can cause i have used all five authorization. How can i remove my old computer which has broken down and can not be started so I can synkronize with my Iphone?

See To deauthorize all computers associated with your Apple ID
on this page -> http://support.apple.com/kb/ht1420
then authorize what you want.

How to resolve "The server is unavailable and could not be accessed. The server is probably disconnected from the network." error in Sharepoint serach crawl.

Hi all,
I have created a content source in Search service application for a particular site collection "http://spwebapp/sites".
I performed reset crawl index of Search service application and then performed a full crawl.
But i get errors on running crawl on this content source for most of the files. The error is "The server is unavailable and could not be accessed. The server is probably disconnected from the network." Though the site is accessible.
But before performing reset index the crawl was working fine on this content source. Crawl is working fine for other site collections. Only one site collection is facing this problem. Please let me know if what I can do to resolve this error.
Thanks in advance.

Are you seeing any error messages in the URL related to the Gatherer? And in your content source, are there any site URLs that are no longer active or do you have any crawl rules set up that might be affecting access to the site collection?
I've seen this happen for a variety of reason, SSL issues, proxy issues, permissions issues. The Eventvwr and ULS logs should help you narrow down the real problem.
Sometimes this is an issue because the indexer and the site are sitting on the same box, you could try doing a disable loopback check to see if that resolves the issue and if it does then go through the hassle of setting up a specific LSA :
http://iedaddy.com/2009/04/sharepointdisable-loopback-check/
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Checkpoint SSL Network extender stuck on Java applet when using firefox 4.0.1

I use check point SSL network extender on my mac to access my company's VPN. Since upgrading to 4.0.1, I get the message "Please confirm the use of this Java applet and then refresh or reopen the window.
If you have already disapproved using this applet, you might need to restart your browser before attempting to connect again"
I'll accept, refresh, wait, and then the message comes back. I never get through. I just uninstalled 4.0.1 and went back to 3.6.17 and it's working fine on the old version.

The first thing I notice is that you are using Firefox 4 and that is now out of date, it is not considered secure so it would make sense to upgrade to Firefox 5 (Or Firefox 6 if you read this after the 16th)
You mention Firefox 3.6.17, and although Firefox 3.6 is still (for possibly only a limited time) supported I believe the current version is 3.6.20 (it is certainly at least 3.6.18) so again you are using an out of date version. I am not a Mac user but IIRC some of the recent updates were Mac specific and fixed Mac problems, possibly problems relating to Java.
If you wish to use more than one version of Firefox to test problems developers tend to use separate profiles and custom installs but for ordinary users it may be worth considering firefox [http://portableapps.com/apps/internet/firefox_portable portable] versions. (that tip is applicable mainly to Windows users, no doubt there is also a poratable version for firfox5 Mac users somewhere)

I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset somet

I have a Samsung Network Extender, model SCS-2U01, and for the past two weeks, the SYS light has gone from solid blue to a blinking red light, disconnecting me from my business calls. In reading the forums, it was mentioned that Verizon had to reset something on their end to fix the issue. Would you be able to confirm if something needs to be reset to fix the issue? Thank you!

First, try the normal stuff: power cycle your modem, router, and NE allowing time for each component to stabilize before turning on the next in sequence modem > router > NE. If necessary, try resetting your modem and router. If it still doesn’t work verify it is listed in MyVerizon and then calling Verizon Wireless Customer Service at (800) 922-0204. Good luck!

TS1567 Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all my disap

Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!

Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store

SQL 2012 SP1 - How to determine a query that causes Error 8623 in SQL Log: The query processor ran out of internal resources and could not produce a query plan. This is a rare event...

We are getting multiple 8623 Errors in SQL Log while running Vendor's software.
How can you catch which Query causes the error?
I tried to catch it using SQL Profiler Trace but it doesn't show which Query/Sp is the one causing an error.
I also tried to use Extended Event session to catch it, but it doesn't create any output either.
Error:
The query processor ran out of internal resources and could not produce a query plan. This is a rare event and only expected for extremely complex queries or queries that
reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer Support Services for more information.
Extended Event Session that I used;
CREATE EVENT SESSION
overly_complex_queries
ON SERVER
ADD EVENT sqlserver.error_reported
ACTION (sqlserver.sql_text, sqlserver.tsql_stack, sqlserver.database_id, sqlserver.username)
WHERE ([severity] = 16
AND [error_number] = 8623)
ADD TARGET package0.asynchronous_file_target
(SET filename = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xel' ,
metadatafile = 'E:\SQLServer2012\MSSQL11.MSSQLSERVER\MSSQL\Log\XE\overly_complex_queries.xem',
max_file_size = 10,
max_rollover_files = 5)
WITH (MAX_DISPATCH_LATENCY = 5SECONDS)
GO
-- Start the session
ALTER EVENT SESSION overly_complex_queries
ON SERVER STATE = START
GO
It creates only .xel file, but not .xem
Any help/advice is greatly appreciated

Hi VK_DBA,
According to your error message, about which query statement may fail with error message 8623, as other post, you can use trace flag 4102 & 4118 for overcoming this error. Another way is looking for queries with very long IN lists, a large number of
UNIONs, or a large number of nested sub-queries. These are the most common causes of this particular error message.
The error 8623 occurs when attempting to select records through a query with a large number of entries in the "IN" clause (> 10,000). For avoiding this error, I suggest that you could apply the latest Cumulative Updates media for SQL Server 2012 Service
Pack 1, then simplify the query. You may try divide and conquer approach to get part of the query working (as temp table) and then add extra joins / conditions. Or You could try to run the query using the hint option (force order), option (hash join), option
(merge join) with a plan guide.
For more information about error 8623, you can review the following article.
http://blogs.technet.com/b/mdegre/archive/2012/03/13/8623-the-query-processor-ran-out-of-internal-resources-and-could-not-produce-a-query-plan.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either.

icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either on both devices

Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

I erased my HD and could not install lion. if I turn on the mac now all I see is a folder with a question-mark. How can I install a new operation system?

Install or Reinstall Mavericks, Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I keep getting the message, "the file is damaged and could not be repaired"

I have a newer Gateway PC equipped with Windows Vista Ultimate, and recently downloaded the free Adobe Reader 8.1.1 version to it.
I'm not very computer literate, so I'm not sure which terminology to use all the time...sorry.
When I attempt to open (view, read, download?) a pdf file, it starts the download process, showing the progress at the bottom of the page....for example, it might say, "downloading (16.2kb out of 543.5kb)"
Usually, about a minute or so into the download, the word "downloading" changes to "downloaded", the action stops, and shortly after (on the window with the gray Adobe Reader background), a smaller message window pops up, declaring, "the file is damaged and could not be repaired".
A friend suggested that there was probably a problem with the original downloading of Reader and recommended that I completely remove it from my system, then re-install it. Reluctantly, with a very slow dial-up connection network, I did as he suggested, then painfully sat through about a two-hour download AGAIN of Reader 8.1.1
After the download was completed again, I successfully opened a few of the pdf files which I was previously having the problems with. Problem solved??? NOT QUITE!!! After about three or four successful file downloads (openings/readings of the files), it again started to do the same thing, where it would not complete the downloading/opening process and again leaving the message, "the file is damaged and could not be repaired."
I am very confident that the files are not the problem, as many of my friends have viewed/opened those same pdf files repeatedly with no issues, BUT WHAT IS CAUSING THIS??? As I said before, I'm not very computer savvy as it is, and adding the newer Windows Vista Ultimate OS probably hasn't helped any.
1. Is the problem with Windows Vista?
2. Is the problem with Adobe Reader 8.1.1 (or the downloading of it)?
3. Is the problem related to the security settings of my computer?
4. Is the problem likely virus related (I use the purchased McAfee protection)?
I just don't know where or how to start looking for the solution, other than thru this forum, and I simply can't afford the time to remove and re-install Adobe Reader 8.1.1 each time I need the use of my computer.
Any assistance would be greatly appreciated, and you can e-mail me with suggestions to [email protected], or else call me on my cell
THANK YOU,
Don Maycumber
Republic, WA
509-570-8114 Verizon mobile

I'm having the same problem but with high speed access.
Anyone know the answer?
~Chris

Cannot open PDF - "file is damaged and could not be repaired"

We created a signable, saveable, Reader Extended PDF in Acrobat X 10.1.4, with a Submit button that exports it using the "PDF The complete document" format to a .php page on our website using the url: http://www.todayscihld.us/pdfscript/fdf.php?form_name=WebForm
This is the .php page that's supposed to receive the export via the submit button and email it as an attachment:
<?php
// $form_name is provided in the url that calls this page, allowing this page
// to be called from different PDF's, yet customized for each one
$date = (date ("m/d/y"));
$time = (date ("H:i:s T"));
$tmpname = (date ("mdy-His"));
$message = '
This is a multi-part message in MIME format.
------=_NextPart_000_0007_01C37EC6.3F062EA0
Content-Type: text/plain;
    charset="iso-8859-1"
Content-Transfer-Encoding: 7bit
A '.$form_name.' was submitted from the Website at '.$time.' on '.$date.'.
(attachment: '.$form_name.')
------=_NextPart_000_0007_01C37EC6.3F062EA0
Content-Type: application/vnd.fdf;
    name="PDF-'.$tmpname.'.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
    filename="PDF-'.$tmpname.'.pdf"
'.base64_encode(file_get_contents('php://input')).'
------=_NextPart_000_0007_01C37EC6.3F062EA0--
$recip = "[email protected]";
$subject = $form_name;
$headers = "From: Website <[email protected]>\n";
$headers .= "Return-Path: <[email protected]>\n";
//use the following line for bcc:
//$headers .= "bcc: [email][email protected][/email]\n";
$headers .= "Content-Type: multipart/mixed; boundary=\"----=_NextPart_000_0007_01C37EC6.3F062EA0\"\n";
$status = mail($recip, $subject, $message, $headers);
Header("Location: http://www.todayschild.us/page.php?3");
?>
Most of the time this works, however some of the time we get blank PDF files (<10KB), and sometimes we get filled PDF files that we cannot open in Adobe Reader X 10.1.4 - we get the "file is damaged and could not be repaired" error. However, I can view this "damaged" pdf just fine in the Chrome built-in PDF viewer, and I can open it using Foxit Reader and Nitro Reader. And if I open it in one of those programs and then save it under a new name, I can open the newly saved file in Adobe Reader. So why is it that everything except Adobe Reader can open this file?
Here's one of these problem PDF files: https://dl.dropbox.com/u/65535781/PDF-112612-162749.pdf
Can anyone help me figure out what's going wrong, and what we can do to fix it?

Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Apple Mobile Device service could not be started. (-2146959337)

I keep getting the error "Apple Mobile Device service could not be started because an unknown error occurred (-2146959337). After I hit OK, it says "This iPod cannot be used because the Apple Mobile Device is not started." I have tried starting the service by going into Services, but it just tells me "Error 5: Access is denied." I have reinstalled iTunes, Quicktime, and Apple Mobile Device service multiple times, but I still get the same error. I had an iPod nano that worked fine, but now that I got an iPod touch, it gives me this issue every time I connect it.

I figured it out on my own, and it was an odd fix. I added a password to my account in users, and then made Apple Mobile Device service log in through my account, and now it works.

SSL Network Extender Service is Down and could not be started

Similar Messages

Maybe you are looking for