Ssl or tls lock is not displayed to confirm a secure connection

FF 4.0.1
XP pro sp 2 or better
extensions
TabMixPlus
FireFTP
DownThemAll
Java Quick Starter
When connecting to a secure site the lock icon is not displayed to indicate that it is a secure connection. Nor have I noticed any type of notice that a connection is secure.

Credit the-edmeister
The Statusbar is gone and the "lock" with it. Security information about a web page is shown by the Site Identity Button.
https://support.mozilla.com/en-US/kb/Site+Identity+Button
You can add a padlock to the location bar with the Padlock add-on- https://addons.mozilla.org/firefox/addon/padlock-icon

Similar Messages

Warning messages are not displayed in confirmation

Hi,
We are working with SRM 5.0 classic scenario. Our issue is warning messages are not displayed whenever we press the CONFIRM or DELETE button in the confirmation, however warning messages are displayed if we press CHECK button in the confirmation.
Please suggest the solution to display the warning messages while clicking CONFIRM or DELETE button in the confirmation.
Thank you
Natarajan

Hi Muthu,
Thanks for your reply. We raised the OSS message for this issue. As per the standard system behaviour, warning messages will not be diplayed when " DLETETE" button pressed.
In the DELETE mode, the system will display only the first EXPRESS
ERROR message and not WARNING messages.
Inorder to maintain an error message as EXPRESS, the FIELD_NAME
(i.e ls_message-field_name) has to be assigned with the value
EXPRESS.
For example,
ls_message-msgty = 'E'.
ls_message-msgid = 'ZF'.
ls_message-msgno = '000'.
ls_message-field_name = 'EXPRESS'
Kindly note that in the DELETE mode, the system does not display
EXPRESS message with msgty = 'W'.
Only EXPRESS message with msgty = 'E' is recognised and displayed.
The Warning messages will be displayed only during the CHECK mode.
Thank You
Natarajan

Wirless icon not displaying, but says I am connected to network

I am a new Iphone user, so I apologize is this a rookie questions. I believe I am connected to my house wireless connected as the name of my network is checked off when I go to settings and Wifi.
My question is, though, why is my icon not displaying on the top left corner? It displays when I am connected at work and everywhere else I was able to connect. Is there something in my settings that I may have checked?
And, does that mean I am not really connected wirelessly?
Thanks in advance for your help!

Thanks, all. So, I just rebooted and there was no change.
Then, as SteveCWatkings recommended, I went into my settings page. I went into the properties page, and there isn't anything listed beside IP address, Subnet Mask, Router, DNS, etc. They are all empty...
*UPDATE*
Okay, something just happened. AS I WAS RESPONDING, I was clicking on each of the fields (IP address, Subnet, etc to see if I could enter information since they were empty. And,when I got to DNS, it allowed me to type something in. Not knowing what to enter, I clicked back and it took me back to the Settings page. So, I clicked on my network again and when I tapped my network, all the fields were filled in, and the icon appeared.
So, now it appears to be connected. I don't know if it will remain connected, or if I had to tap something (DNS?) or if it was glitch, but it appears to be working now.
Thanks a ton!

PO not displayed in Confirm Goods / service Centrally

We are on SRM 5.0 Extended classic scenario. Backend is ECC 6.0.
A Purchase order has been created in SRM and transferred to ECC does not appear in "Confirm goods / services centrally" transaction.
We noticed that in the Vendor master (Manage business partner) for that Vendor - ERS and Invoice Receipt Expected indicator were NOT set and PO was already created. These two options have been enabled now. Could this be a cause ?
Any inputs or solutiion would be helpful.
Thanks
RB

Hi manoj
you can deactivate the Extended search by modifying the template in SE80.
However for confirmation every time one has to enter the PO number and then do a confirmation.
This is the same functionality as we have in R3 MM in MIGO transaction.
so whether it is simple search or exteneded search the Po number is an input for performing the Confirmation.
regards,
Nimish Sheth

Not display views/tables on DB connect source system

Dear Experts,
After creating a oracle DB connect source system, I want to create data sources based on oracle db. But it is not showing any view/table.
Connection is up and running.
Please advice.
Thanks,
Thilini

Hi Thilini,
Are you sure that the DB user on Oracle has sufficient authorizations?
Does the search help support wildcards? Did you try w/o any wildcard or enter a table or a view name supplied by your Oracle DBA?
Best regards,
Sander

Caps Lock Key not displayed when active on Key board for HP P7 1410

How can I tell if my Caps Lock Key is active??

Hello Again,
If you click on the link below it shows you how to sync, and the instructions are pretty standard with other wireless devices we have. The little receiver that you have plugged into the computer might not have a button on it, but there should be a sync button on the bottom side of the keyboard.
Also after doing some research I was able to find out that less and less of our wireless keyboards are coming with the standard caps lock light. Also if the wording itself doesn't come up on the screen when you press the button and the keyboard is functioning as such then the keyboard doesn't provide that function.
How To Sync
Please respond at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Static Text Not Displaying in Vista on modem connection

I'm very new to Flash. I set up a swf movie on the index page
of
http://www.chicagowoodturners.com
which has apparently been working fine. I've seen it on a number of
different computers and OSs. Yesterday I saw it on a freshly
installed Vista machine, and all the static text was invisible.
Dynamic text appeared fine. Colors are websafe #663300 and #cc00ff.
It was connected by modem, which is the other difference from the
working versions I've seen. The font is Eras Bold ITC. Any guidance
is welcome!
--Chuck

I'm very new to Flash. I set up a swf movie on the index page
of
http://www.chicagowoodturners.com
which has apparently been working fine. I've seen it on a number of
different computers and OSs. Yesterday I saw it on a freshly
installed Vista machine, and all the static text was invisible.
Dynamic text appeared fine. Colors are websafe #663300 and #cc00ff.
It was connected by modem, which is the other difference from the
working versions I've seen. The font is Eras Bold ITC. Any guidance
is welcome!
--Chuck

Mini 110, dc input does not seem to make a secure connection to the male end of the power adapter.

the plug does make contact when plugged in fully but the sligtest movement disconnects the adapter. It does not make connection till pressedin again. The end on the first plug in adapter that came with the netbook came out of the plastic at a slight angle and would not make connection unless the right angle was pointed down so that the high part of the plastic around the plug would be towards the bottom of the computers rounded side. HP sent me a new adapter plug that was straight and it does make contact with the plug in any position but the contact is not very postive. Since my net book is still under warrnanty I would like to know if this is just the way it is or if my internal connection is not correct. the pin inside the internal plug is tight and does not wiggle at all.

The 192.168 prefix suggests that you are on a home network. It is possible you're internal IP address changed from 1 to 2 (or whatever). Buried in the db_1 folders is that folder you mentioned. I made a copy of it named localhost and then everything worked.

Safari not able to establish a secure connection

Under my wife's user, all of a sudden today, Safari is unable to establish a secure connection to secure websites. On my user there is no problem. Only on hers. Does anybody know why this is happening? All of our security settings are the same.

Found the problem. Wife changed parental controls.

Why is the left hand window and bar with the buttons for TOC/Search/Glossary not displaying in one client location?

Greetings all:
I have more years of experience with RoboHelp than I want to admit, but I have never run into this before. I have a published RoboHelp 9 project for an overseas client that displays exactly as it should when the published version is viewed by myself or another RoboHelp developer (not located where I am). However; the users at 1 of 2 two client sites do not see the left hand TOC window or the bar above the project with the buttons (the other site does see it). The users at both sites are using Internet Explorer 9, and I have been told there is no difference in their security set-up. I suspect that at the site where it is not displaying there is a security setting that is throwing it off, but I am not sure what to have them look for. Anyone have any ideas?
W. Keith

Do they not simply see the bar or is it empty? In the first situation, it seems they are opening the topic directly instead of via the start file.
What is the URL the users are using on both the locations? And do the users have a hyperlink 'Show' at the top of the topics?
Kind regards,
Willam

Confirmed Quantity not displayed in SO

Hi All,
Recently we went live on ECC 6.0 and now we are using APO for availability.
We have an issue: A sales order contains 5 line items. The first line item is confirmed for Feb mid. the other items are not confirmed while creating the SO. User later some time ran the availability and was able to deliver the rest 4 line items. Delivery process was totally completed.
But the issue lies in SO the above said 4 line items are not showing any confirmation, all of them are showing 'ZERO' qty in confirmation column. But at the same time all the line items status shows 'Fully Delivered'. Even i checked the VBEP table it shows ZERO confirmed quantity.
As the delivery was completed, when i ran availability in SO system not even showing us the availability screen.
I checked all the settings related to availability, and in quality system we can able do the process normally.
Now my question is what could be the reason, why the system is not displaying the confirmed quantity in its column.
immediate response will be appreciated and help us in fixing this issue.
Thanks in advance
Venkat Cheedalla.

Hi Venkat
If i am not wrong when the sales order was created out of 5 line items only 1 line item might have got confirmed with quantity and other with Zero quantity. But the other 4 line items might be having Zero stock at its plant and when you have done Rescheduling then at the time of delivery the stock got confirmed also and the sales order got closed .That is the reason it is not showing quantity in delivery quantity feild in sales order. but the delivery status might be complete.
Kindly check the VBUP table If it is showing the entire document flow then it is working , but if VBUP is also not getting updated means then you should take help of ABAP'er
Regards
Srinath

Yahoo is not displaying correctly and saying it is untrusted. I unistalled firefox and reinstalled. Still having the same problem. yahoo works fine on chrome.

When loading yahoo.com , it says it is not a trusted site. I can load the news page but home page displays incorrectly and cannot log into my mail. Yahoo is working fine on chrome. Happens ever since I downloaded the latest update to firefox and I cannot download a previous version.

Did you check the issuer of the certificate?
Check out why the site is untrusted and click "Technical Details to expand this section.<br>If the certificate is not trusted because no issuer chain was provided (sec_error_unknown_issuer) then see if you can install this intermediate certificate from another source.
You can retrieve the certificate and check details like who issued certificates and expiration dates of certificates.
*Click the link at the bottom of the error page: "I Understand the Risks"
Let Firefox retrieve the certificate: "Add Exception" -> "Get Certificate".
*Click the "View..." button and inspect the certificate and check who is the issuer of the certificate.
You can see more Details like intermediate certificates that are used in the Details pane.
If "I Understand the Risks" is missing then this page may be opened in an (i)frame and in that case try the right-click context menu and use "This Frame: Open Frame in New Tab".
Note that some firewalls monitor (secure) connections and that programs like Sendori or FiddlerRoot can intercept connections and send their own certificate instead of the website's certificate.

SSL/TLS - secure connection could not be established but passes diagnostics

Any other ideas for the ever popular inability to create a secure connection issue?
I've tried just about everything I could find in all the posts on this issue and continue to get the inability to create a secure connection messag4e when logging in.
We tried the various Apple non-support channels: e-mail, chat, phone, and Genius Bar with no success.
Here's what I've tried (attempting to log in after each change):
SSL3.0 and TLS 1.0 are enabled (and always have been)
iTunes and iTunes Helper are in the Windows Firewall Exception list
reinstalled itunes 9.02 several times.
UNINSTALLED Norton Internet Security
Turned off Windows firewall.
deleted contents of /etc/hosts
Cleared SSL state
Unchecked “Check for server certificate revocation, restarted IE
--After this change I got an "network connection timed out." message
Cleared SSL state
--Back to "secure network connection could not be established"
This happens on my daughter's college network and on our home family area network. And other PCs have no trouble accessing this iTunes account on both of these networks.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
-Griff W.

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Email address hacked via iphone. iphone locked home screen displaying my email password! and has been reset. now unable to restore iphone, saying i do not have permission

Email address hacked via iphone. iphone locked home screen displaying my email password! and has been reset. now unable to restore iphone, saying i do not have permission

If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

Ssl or tls lock is not displayed to confirm a secure connection

Similar Messages

Maybe you are looking for