SSL Outgoing Error

Srs,
Houve uma migração de nossos servidores de exchange e os adminstradores adotaram uma conexão segura (SSL).
Foram informados e alterados as novas URL's dos servidores e suas respectivas portas nos Communications Channels (Incoming e Outgoing) do Integration Directory (PI).
Efetuei a alteração simples mencionada na nota: 856599; Porém, somente para o Incoming a alteração surtiu efeito.
Já para o Outgoing a seguinte mensagem de erro é retornada tanto no SXMB_MONI quanto no Communication Channel Monitoring: u201Cfailed to send mail: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!u201D
Efetuei alterações diferentes nos endereços das urls dentro do PI, mesmo assim o communication channel monitoring me retorna erros... diferentes, mas ainda com erros!
smtpS://smtp-:587 (porta informada e testada via telnet)
Configure User Authentication: X (Check box is selected)
Authentication Method: Plain (from drop-down box)
User: mail.xyz_@_xyz.com
Password: (a senha é mencionada)
Existe mais alguma configuração dentro do PI ou no VA para habilita a conexão SSL?
Criar algum certificado (VA, STRUST, STRUSTSSO2, etc)?
Grato e toda ajuda será muito bem vinda,
Ricardo

Henrique,
Obrigado por sua resposta!
Não, não é necessário nenhuma autênticação.
Irei seguir os passos, conforme procedimentos descritos na nota: Note 891877 (Message-specific configuration of HTTP-Security) e também com informações baseadas no link:
http://help.sap.com/saphelp_nw04s/helpdata/en/fb/c2953fc405330ee10000000a114084/frameset.htm
Se obtiver êxito, torno a postar a solução!
Abçs,
Ricardo

Similar Messages

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
     System.setProperty("javax.net.ssl.trustStore",”cacerts”);
     System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
     System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
     System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1.     Do I create “cacerts” the correct order with right keeltool options?
2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4.     Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
     <wsp:Policy wsu:Id="TokenServices_policy">
          <wsp:ExactlyOne>
               <wsp:All>
                    <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                         <wsp:Policy>
                              <sp:TransportToken>
                                   <wsp:Policy>
                                        <sp:HttpsToken RequireClientCertificate="true"/>
                                   </wsp:Policy>
                              </sp:TransportToken>
                              <sp:AlgorithmSuite>
                                   <wsp:Policy>
                                        <sp:Basic256/>
                                   </wsp:Policy>
                              </sp:AlgorithmSuite>
                              <sp:Layout>
                                   <wsp:Policy>
                                        <sp:Strict/>
                                   </wsp:Policy>
                              </sp:Layout>
                         </wsp:Policy>
                    </sp:TransportBinding>
                    <wsaw:UsingAddressing/>
               </wsp:All>
          </wsp:ExactlyOne>
     </wsp:Policy>
     <wsdl:types>
          <xsd:schema targetNamespace="http://tempuri.org/Imports">
               <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
               <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
     </wsdl:message>
     <wsdl:portType name="ITokenServices">
          <wsdl:operation name="GetUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TokenServices" type="tns:ITokenServices">
          <wsp:PolicyReference URI="#TokenServices_policy"/>
          <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="GetUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="TokenServices">
          <wsdl:port name="TokenServices" binding="tns:TokenServices">
               <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
               <wsa10:EndpointReference>
                    <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
               </wsa10:EndpointReference>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

Weird internet problem / ssl connection error, site loads in safari not in firefox or other way around

I really can't figure out this problem. Search the internet tried all kinds of things, nothing help so far.
I have a Macbook Pro (Lion originally installed) running on Mavericks (all latest updates). SSD installed and the DVD tray is replaced by the original HDD.
The laptop wasn't running very smooth anymore so decided to give it a fresh Mavericks install (even though I know it's not really necessary for mac, it helped, everything is much faster except a weird internet problem came up).
After freshly installing Mavericks I couldn't get into my google account anymore, just wouldn't load. Tried Safari (use this normally) and Firefox and Chrome, this last was gave a SSL connection error, both Safari and FF said the website couldn't be loaded because the server didn't respond. For Gmail I use Mailplane which is just stuck on a white page. I tried repairing the keychain, repaired disk and disk permissions, cleaned browsers, turned off firewall and antivirus (Shopos) started in safe mode, checked time settings which were all good. Nothing of this helped. I even ended up creating a usb bootdisk for Mavericks, formatted the disk and reinstalled from the start just Mavericks and nothing else, started Safari, still the same problem. As even this didn't help I figured it's not worth reinstalling all software so put back my backup.
Now I ended up somehow only being able to use Gmail normally in Firefox, Chrome still gives SSL error and Safari can load the inbox, but I can't open any messages. I get the error there is a problem with the connection. If I try in Basic HTML mode it surprisingly does work.
You would say, just use Firefox, finished...but the thing is that sometimes random websites won't load in Firefox, when I load the same site in Safari it works perfectly.
O yes, I also tried the connect to my iPhone and use the Cellular data network, then it's no problem using Gmail in Safari normally. You would say it's a router problem, but I have another Macbook Pro (just one model later running Mountain Lion) this one works perfectly with every browser. Also my iPhone does everyting logged into the WiFi network.
You can understand I really have no clue what's going on here, I don't see any logic. I can only think of a hardware problem in my Macbook, but don't see how that could cause these problems.
I hope someone is ably to help me ?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Hybrid Connection fails for Windows SQL Server 2014 - SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted

Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal Morciniec

Same issue here, looking for more information !

SSL Handshake Error in Android (ADF Mobile)

Hi Guys,
Now I am tried to using "https" Web service with my application, but seems show SSL handshake error specially in Android only, iOS is totally working.
Log from Android is
09-27 18:09:03.252: I/System.out(30444): [SEVERE - oracle.adfmf.framework - adf.mf.internal - logError] Request: {classname: oracle.adfmf.framework.api.Model; method: processBatchRequests; params: [0: false][1: [0: {classname: oracle.adfmf.framework.api.Model; method: evaluateMethodExpression; params: [0: #{bindings.AgentAuthenCDKey.execute}][1: [0: {.type: oracle.adfmf.amx.event.ActionEvent; }]][2: void][3: [0: oracle.adfmf.amx.event.ActionEvent]]; }]]; } exception: {message: SSL handshake failure; errorCode: 409; .type: oracle.adfmf.framework.exception.AdfInvocationRuntimeException; .exception: true; severity: ERROR; errorCategory: WEBSERVICE; }
How to solved this one ?
** If my android didn't connect to internet, it still show "SSL handshake error" too, that so weird !

Hi,
Sorry to bump this, but I have the exact same problem. "SSL Handshake Error" when calling SSL enabled web services - works fine on iOS, but not on Android, which implies to me a problem with the framework rather than my certificate?
: D/CVM(985): [SEVERE - oracle.adfmf.framework - Utility - invoke] InvocationTargetException Error: ERROR [oracle.adfmf.framework.exception.AdfInvocationRuntimeException] - SSL handshake failure
I'm on JDeveloper 11.1.2.4, ADF Mobile Framework 11.1.2.4.39.64.51.
Are there any known issues with ADF Mobile/SSL on Android?
Any help is much appreciated.
Rich.

Can't access ABS URL and autodiscover.sipdomain URLs externally - SSL protocol error

Problems:
- Can't sync Address Book for external or internal clients (I can do searches however just fine so I'm not sure what protocol is used to perform those, if not with address book)
- Can't connect to Lync mobile.
What I discovered was common with these issues is when I go to try and manually enter in the browser either:
https://lyncdiscover.sipdomain.com/ (to test mobile autodiscover connectivity)
or
https://"extwebservicesURL"/abs (to test address book)
I get same response from google: Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error.
I also ran Test-CsMcxP2PIM and got this:
TargetUri : https://pitlyncpool01.pit.local:443/CertProv/CertProvisioningService.svc
TargetFqdn : pitlyncpool01.pit.local
Result : Failure
Latency : 00:00:00
Error : ERROR - No response received for Web-Ticket service.
Inner Exception:The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be
sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.o
rg/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.0 - Internal Server Error</title>
<style type="text/css">
And similar result when I test with "Test-CsAddressBookService"
TargetUri : https://pitlyncpool01.pit.local:443/groupexpansion/service.svc
TargetFqdn : pitlyncpool01.pit.local
Result : Failure
Latency : 00:00:00
Error : ERROR - No response received for Web-Ticket service.
Inner Exception:The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (text/xml; charset=utf-8). If using a custom encoder, be
sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.o
rg/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.0 - Internal Server Error</title>
The only search on google that I found on this is to uninstall IIS and Lync web components and reinstall. Which I tried, but Lync web components wouldn't install back (error), so I restored server back from the snapshot and back to square one..
Also tried https://www.testocsconnectivity.com to run test on mobile autodiscovery and got this:
ExRCA is attempting to obtain the SSL certificate from remote server lyncdiscover.sipdomain.com on port 443.
ExRCA wasn't able to obtain the remote SSL certificate.
Additional Details
The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Is there anything else I can look into to find out why am I getting these errors? Maybe to try OCS logging utility? But I don't know which components to checkmark for logging..
Thank you for any help and Happy New Year!
Sergey

Hi,
It seems the web service url is not valid or the web service not function. Is it Lync Standard Edition or Enterprise? Did the mobility issue also happen for external? Have you assigned a public certificate for reverse proxy correctly?
1. Please go to topology builder and check which FQDN you did put in for internal and external web service. For Lync Server Standard Edition, the internal web base URL should be same with your front end server FQDN.
If the internal domain name is different with external domain name, for example, your internal domain is contoso.net, but your external domain name is contoso.com. The external base URL should use the contoso.com domain name.
2. Please make sure the certificate has been assigned on front end server successfully. Please go to Lync Server deployment wizard to check it.
3. In IIS, please make sure Lync Server Internal Web Site is configured on ports 80 and 443 and Lync Server External Web is configured on ports 8080 and 4443.
More details about configuring reverse proxy for your reference:
http://social.technet.microsoft.com/wiki/contents/articles/9807.configuring-forefront-tmg-2010-as-reverse-proxy-for-lync-server-2010.aspx
If the issue persists, please try to enable logging tool and reproduce the issue to get report for further troubleshooting.
http://blog.schertz.name/2011/06/using-the-lync-logging-tool/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

EAP-TLS or PEAP authentication failed during SSL handshake error

I have 2 Windows 2003 ACS 3.2 servers. I am in the process of upgrading them to ACS 4.0. I am using them for WPA2/PEAP wireless authentication in a WDS environment. I recently upgraded one to ACS 4.0 and ever since that time some (not all) of my Windows XP clients have started to not be authenticated and logging the error "EAP-TLS or PEAP authentication failed during SSL handshake" on the ACS 4.0 server. During the upgrade (which was successful) I did change the Certificate since the current one was going to expire November 2007.
The clients that do not authenticate on the ACS 4.0 server I can point to the ACS 3.2 server and they successfully authenticate there. I am able to resolve the issue by recreating the Windows XP PEAP profile for the wireless network and by getting a new client Cert. But, I have a couple of questions:
Is the "EAP-TLS or PEAP authentication failed during SSL handshake" error due to the upgrade to ACS 4.0 or to the fact that I changed the Certificate, or both?
Can this error ("EAP-TLS or PEAP authentication failed during SSL handshake") be resolved without me touching every Windows XP client (we have over 250+)?
Thanks for the help

My experience suggests that the problem is the certificate.
I'm running ACS 3.3.
I received the same error message when my clients copied the certificate to the wrong location, or otherwise did not correctly follow the provided instructions.
Correctly following the instructions led to a successful connection and no more error message.

Citrix receiver throws "ssl initialisation error 8" when launching citrix apps from firefox on Windows

Hi all,
I recently switched over to mozilla firefox from google chrome as Google has now disabled NPAPI and thus allowing me the inability to launch citrix applications.
I have installed the latest version of firefox and have the latest version of citrix receiver. When i login to my citrix site and try to launch the citrix applications, nothing happens. When i manually launch the ica file, i receive the error. "Unable to connect to the Xenapp server. SSL initialisation error 8".
Please help as i need to get this up and running by this week.
Thanks.
Regards,
Ochen

Unfortunately we can't support plugins here. While still working (some of the time) in Firefox, NPAPI is officially considered legacy, and thus not supported, in Firefox.
I suggest working with Citrix or using Internet Explorer to run XenApps.

When trying to get to a CUIC permalink report via a get XML document data step in UCCX, we get a SSL certificate error

Has anyone found a way to overcome the SSL certificate error via UCCX editor? See attached screenshots. Thanks!

Hi, not easily, no.
But I guess this has already been discussed/answered by Sam Womack in a later post. What you need to do is talk to TAC and have them upload the client certificate into your UCCX's keystore.
G.

Ssl connection error

Respected sir I m facing a problem on my laptop from sume days before here whenever I want to use google chrome by wifi network of my mobile.
Its say SSL connection error
ERR_SSL_PROTOCOL_ERROER
Before its working well I didnt updated window or installed any anti virus I m confused why its nt working. .. please solve my problem.
Thank you sir

Hi,
Did you installed any security software, such as Kaspersky? if so, this problem probably caused by security software settings. Please check it.
Roger Lu
TechNet Community Support

SSL policy errors have been encountered. Error code '0x2'

I'm trying to install Office Web Apps Server in HTTPS mode. in my farm i have 2 app servers, 2 web servers, 1 OWA server. OWA server is in different vlan(i
have enabled 443, 809 between SharePoint servers and OWA server). When I run
the command "New-SPWOPIBinding -ServerName "xxxxx.domain.com" (FDQN) in web servers. i got this blow error.
New-SPWOPIBinding -ServerName "xxxx.domain.com"
WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed. If you are using a server configured with HTTP, you must include
the -AllowHTTP parameter.
At line:1 char:1
+ New-SPWOPIBinding -ServerName " xxxx.domain.com""
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : NotSpecified: (Microsoft.Share...tNewWOPIBinding
   :SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
   inding
Event viewer error:
Event ID:      8311
Error : SSL policy errors have been encountered. Error code '0x2'..
Description: An operation failed because the following certificate has validation errors.
i have tried the following things:
1. generate the SharePoint root certificate and import to all server trusted root certificate authorities and intermediate certificate authorities folders. i have imported
OWA site SSL certificate to this two folders also.
2. added the below following code in SharePoint site web.config file <system.net>
<settings>
<servicePointManager checkCertificateName=”false” checkCertificateRevocationList=”false” />
</settings>
3. added the certificates(Root Certificate and OWA SSL) to SharePoint central admin -> security -> manage trust
the above scenarios are not helping. i am in critical stage in my installation. please help me to resolve this issue.
Thanks,
Arun P

I am experiencing this exact same issue. Anxious to see the fix for this. I have seen others post similar issues but I can't clearly understand how it's remediated.

[SOLVED] Unknown SSL protocol error in connection

Hi there. I'm trying to get a website with curl but i'm getting this error:
[martriay@atila ~]$ curl -v "https://servicios1.afip.gov.ar"
* Rebuilt URL to: https://servicios1.afip.gov.ar/
* Hostname was NOT found in DNS cache
* Adding handle: conn: 0x20412c0
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 0 (0x20412c0) send_pipe: 1, recv_pipe: 0
* Trying 200.1.116.53...
* Connected to servicios1.afip.gov.ar (200.1.116.53) port 443 (#0)
* successfully set certificate verify locations:
* CAfile: /etc/ssl/certs/ca-certificates.crt
CApath: none
* SSLv3, TLS handshake, Client hello (1):
* Unknown SSL protocol error in connection to servicios1.afip.gov.ar:443
* Closing connection 0
curl: (35) Unknown SSL protocol error in connection to servicios1.afip.gov.ar:443
And when i try with SSLv3:
[martriay@atila ~]$ curl -3 -v "https://servicios1.afip.gov.ar"
* Rebuilt URL to: https://servicios1.afip.gov.ar/
* Hostname was NOT found in DNS cache
* Adding handle: conn: 0x8032c0
* Adding handle: send: 0
* Adding handle: recv: 0
* Curl_addHandleToPipeline: length: 1
* - Conn 0 (0x8032c0) send_pipe: 1, recv_pipe: 0
* Trying 200.1.116.53...
* Connected to servicios1.afip.gov.ar (200.1.116.53) port 443 (#0)
* Unsupported SSL protocol version
* Closing connection 0
curl: (35) Unsupported SSL protocol version
That's from my archlinux server, while on my desktop's fedora it works just fine. Both computers are within the same network.
openssl version:
[martriay@atila ~]$ openssl version
OpenSSL 1.0.1e 11 Feb 2013
openssl connection attempt
[martriay@atila ~]$ openssl s_client -connect servicios1.afip.gov.ar:443
CONNECTED(00000003)
write:errno=104
no peer certificate available
No client certificate CA names sent
SSL handshake has read 0 bytes and written 322 bytes
New, (NONE), Cipher is (NONE)
Secure Renegotiation IS NOT supported
Compression: NONE
Expansion: NONE
If I add the -ssl3 option:
[martriay@atila ~]$ openssl s_client -connect servicios1.afip.gov.ar:443 -ssl3
CONNECTED(00000003)
depth=1 C = GB, ST = Greater Manchester, L = Salford, O = COMODO CA Limited, CN = COMODO High-Assurance Secure Server CA
verify error:num=20:unable to get local issuer certificate
verify return:0
Certificate chain
0 s:/C=AR/postalCode=1086/ST=Ciudad Autonoma de Buenos Aires/L=Capital Federal/street=Hipolito Yirigoyen 370/O=ADMINISTRACION FEDERAL DE INGRESOS PUBLICOS/OU=Issued through ADMINISTRACION FEDERAL DE INGRESOS PUBLICOS E-PKI/OU=InstantSSL/CN=servicios1.afip.gov.ar
i:/C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO High-Assurance Secure Server CA
1 s:/C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO High-Assurance Secure Server CA
i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root
Server certificate
-----BEGIN CERTIFICATE-----
-----END CERTIFICATE-----
subject=/C=AR/postalCode=1086/ST=Ciudad Autonoma de Buenos Aires/L=Capital Federal/street=Hipolito Yirigoyen 370/O=ADMINISTRACION FEDERAL DE INGRESOS PUBLICOS/OU=Issued through ADMINISTRACION FEDERAL DE INGRESOS PUBLICOS E-PKI/OU=InstantSSL/CN=servicios1.afip.gov.ar
issuer=/C=GB/ST=Greater Manchester/L=Salford/O=COMODO CA Limited/CN=COMODO High-Assurance Secure Server CA
No client certificate CA names sent
SSL handshake has read 3048 bytes and written 485 bytes
New, TLSv1/SSLv3, Cipher is RC4-MD5
Server public key is 2048 bit
Secure Renegotiation IS NOT supported
Compression: NONE
Expansion: NONE
SSL-Session:
Protocol : SSLv3
Cipher : RC4-MD5
Session-ID: F34244E0C2E402103FC9B7216E504E89761FDAF31CC1AC3A7939BE99AD8D0C57
Session-ID-ctx:
Master-Key: 146C91E59E259AD38C1E7A0B8E5DBEAE2D768622DE4045CD927D60A40FF8CA527A2694E227FEE30CC0909ADE0B72B0C8
Key-Arg : None
PSK identity: None
PSK identity hint: None
SRP username: None
Start Time: 1389232087
Timeout : 7200 (sec)
Verify return code: 20 (unable to get local issuer certificate)
Any ideas?
Last edited by martriay (2014-01-09 14:05:02)

Downgrade curl to 7.33.0-3. There is a known bug that is now fixed and should be released with the next version. I got bit by this too
Scott

Help needed to fix : 400 Illegal SSL Request error in Portal

Hi All,
We are working on SAP CRM 2007. We have brought some transaction on to WEB UI using transaction launcher. These transactions are working as expected in Web UI.
We have moved this to Portal as per clients req, but when we launch these transactions from Portal,
we are getting an error saying "400 Illegal SSL Request, Error - 19, Component ICM, etc."
Sometimes, we are encountering time out error.
And the Back, Exit, Execute buttons are appearing twice in the Portal.Any pointers on how to resolve this.
Thanks,
Udaya
Edited by: Udaya Bhaskar Perecharla on Aug 29, 2008 12:12 PM

Hi,
although I guess you have already solved the problem by yourself, I just wanted to post a possible reason here because we were facing the same problem.
The error occured after moving from HTTP to HTTPS and the details of the webservice reference were not correct.
We checked the reference and finally just had to add an 'S' to the URL:
<add key="SRV_VIEWOPEN.wsdl11" value=httpS://servername:port/sap/bc/soap/rfc/>
Maybe that helps.
Regards Daniel

After installing the notified update I am unable to send e-mails (using O/E on XP) as my system is supposedly unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F".) Everything was working fine immediately before I updated.

After installing the notified update I am unable to send e-mails (using Outlook Express on Windows XP) as my system is now thought to be Unsecure. (I receive a message saying "... Secure(SSL): No, Error Number: 0x800CCC0F") Everything was working fine immediately before I installed the update. Can anyone (pleeeease) tell me where Flash has changed my security settings as I have looked at the setup, but everything looks okay. Thankyou!

Branching this to a new discussion as it appear you are facing difficulties with the installation or running the programs you have been downloading and installing.

SSL webvpn ErroR

DEAR All
i have issue in SSL webvpn . I have 2 ASA (5520 and 5510 in 2 different locations in india)
1st ASA 5520 it is in my datacenter i have configure webvpn to access my web applications hosted in my datacenter.
As starter i have created a local account in ASA for webvpn access . i am able to access the webvpn using the local credentilas.
when i try to click the URL i get error " Internet Explorer cannot dispaly the webpage" .
Instead of error msg i should be prompted with usename and password for the websie . I have attached "afterloginscreen_5520&5510" scrren shot which shows the SSL-webvpn is working and the second screen shot " error_page_5520" shows the error when i click the URL .
2nd ASA 5510 it is in my another datacenter . i have configured the same and working fine ,i have no problem in accessing the website , i have attached the screen shot " working_5510_asking_for_username&password"
for ASA5520 webservers are native
for ASA5510 webserver are in remote
last month wen i tired using ASA 5520 it was working as charm , wen i now tired with both ASA enabled 5520 is not working ,
6|Oct 26 2012 14:37:39|725007: SSL session with client Outside:Internet IP /1631 terminated.
6|Oct 26 2012 14:37:40|725001: Starting SSL handshake with client Outside:Internet IP /1634 for TLSv1 session.
6|Oct 26 2012 14:37:40|725003: SSL client Outside:Internet IP /1634 request to resume previous session.
6|Oct 26 2012 14:37:40|725002: Device completed SSL handshake with client Outside:Internet IP/1634
6|Oct 26 2012 14:37:40|716003: Group <omsir VPN> User <omsir> IP <Internet IP> WebVPN access GRANTED: http://URL//
Please help me ;;;;;;;;;;;;;;;; Thanks in Advance .

Hello all
I have solved this issue
My ASA licensed only for 3DES . once i tried AES trail version from cisco it worked like a charm ..
i know this is wired, but what to do this has solved the issue
Enjoy
Naresh

SSL Outgoing Error

Similar Messages

Maybe you are looking for