SSL Problem again!!!

A month or so ago I finally got ssl to work on our first master. I had to use a Entrust certificate because our verisighn one was not working. Now I'm going through the same stuff w/ the second master. Has anyone had these kind of problems. The wierd thing is that a verisign cert works w/ the admin server but not the directory. When it shows up in the directory it says isdued by NULL and that what I think is the problem. I think I just got lucky the first time now I have to do it all over again. I read that maybe the cert7.db is corrupt. Any help is apprecciated.

HI,
I have enabled SSl on Sun ONE Directory Server 5.2. We found that the response time has decreased considerably. Does any have some statistics comparing ssl response times and non-ssl response times.
Are there any server settings which can improve the response times when ssl is enabled?
Also, noticed that the response is even slower when there is an authentication error or any other error.
We have just a week away from going to production. Please help.
Thanks.

Similar Messages

SSL-Problems when setting up a test environment with Exchange

Hello everyone,
I am trying to set up a test environment with Exchange 2013 to learn how the stuff works. However, I am facing some problems due to the fact that Exchange is designed for use with SSL certificates. The main thing that makes problems is the connection with
RPC over HTTP. I've used the MS remote connectivity analyzer to find out why it is not working and as I thought it is because of a missing SSL certificate (it seems the self signed doesn't work here). Now in order to get this working I just bought a certificate
for "mydomain.com". Now here is the first problem: This certificate is NOT a wildcard certificate. So if I understood correctly it works for mydomain.com but it won't work for subdomain.mydomain.com. Is this correct? (First question)
If this is correct I will probably another problem: As I said this is a learning-environment so the server is at home behind a router. This means: Only one WAN-IP. I think could get this working by forwarding everything to the Exchange Server (like mydomain.com
goes to the WAN-IP where the router is forwarding everything like port 25 or 443 directly to the exchange Server). This way I wouldn't have any problems I think: mydomain.com has a valid SSL cert, it resolves to my WAN-IP which forwards everything to the internal
Exchange Server. Now here is the problem: I plan to setup a SharePoint Server as well. I thought about using ARR (IIS) to make both available behind the same WAN-IP without using ports inside the url. Ideally the Exchange Server should then be available via
"mail.mydomain.com". This will work fine with ARR but then I probably have SSL problems again? (second question)
Do you have any ideas what I can do to solve such problems? Should I buy another certificate for mail.mydomain.com? But then I would need to buy several certificates (e.g. for autodiscover.mydomain.com to get this working as well). This can become very expensive...
Thanks!
Regards
Christian

Hi,
For your first question, if there is a single certificate just for “mydomain.com”, it cannot work for subdomain.mydomain.com.
Generally, antodiscover.domain.com is used to access the autodiscover service for external users. If you just need test users to access Exchange server from internal environment, it is not necessary to get a certificate for autodiscover.domain.com.
Therefore, for your second question what I can ensure is that if all URLs that used to connect Exchange from internal and external are configured to mail.mydomain.com with all services(IIS,SMTP,POP,IMAP), there will be no certificate problems in Exchange
side.
Best Regards,
Winnie Liang
TechNet Community Support

The same problem again with HP Simple Pass fingerprint reader after upfrading from Firefox 4 to Firefox 5. I have already installed HPSimPlePass 7.0.74.0 to fix the problem after upgrading to Firefox 4.

I have a HP Pavilion dv6 with a fingerprint reader. I had the same problem as many other people when upgrading to Firefox 4, : I couldn't use the HP Simple Pass to enter a website needing a username and password by just swiping my fingerprint. I fixed the problem by downloading the new HPSimPlePass 7.0.74.0. This fixed the problem and I was very happy. Since upgrading to Firefox 5 I have the same problem again, but I already have the new version of HP Simple Pass. How can this be fixed so that I can use this fingerprint scan feature again, or where can I download Firefox 4 again?

''FredMcD [[#answer-709783|said]]''
<blockquote>
The programers know of this and are working on it.
</blockquote>

Audio Render Problems Again

I'm having problem again rendering a one hour presentation. If I use Command/R, the dialog box indicates seven or more days. If I highlight the selection I get essentially the same estimated time.
Command/R usually works, but not this time. Audio For Playback is checked.
The DV timeline plays in Quick Time OK.
I desperately need to get this video sent out! I even deleted preferences using the "Preference Manager" program.
David

All of my lecture video series are recorded in LP 16 bit audio. Each lecture is between 1 to 1.5 hr in length. I have successfully completed 10 of the 23.
Each lecture is sent to iMovie HD and then the timeline.mov is placed into FCE. One other time the timeline audio would not render, so I converted it to DV via MPEG Stream Clip and placed it back into FCE. The lecture I'm having trouble with is #11.
As mentioned, usually Command-R will do the trick in 10 minutes or so, not 6 to 10 days.
David

Explorer problem again????

I got explorer.exe problem again,which was solved previously by creating new user account.I am free from problem for around 1 month and started again, and this time very frequently i am getting windows with message that
"Windows Explorer has stopped working".I am using windows 7 professional service pack 1.Please any body give permanent solution to this problem,Problem details are below
Problem signature:
Problem Event Name:    AutoVerifierV2
Application Name:    explorer.exe
Application Version:    6.1.7600.16450
Application Timestamp:    4aeba271
Fault Module Name:    verifier.dll
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5bdb2a
Exception Code:    80000003
Exception Offset:    0000c0de
Status Code:    201
OriginalBucketID:    0
OS Version:    6.1.7600.2.0.0.256.48
Locale ID:    1033
Additional Information 1:    e903
Additional Information 2:    e90395e1c160c582c0a3c5e6d36ee788
Additional Information 3:    f03b
Additional Information 4:    f03b4ab77c5a1d7b156e29c2436e59a6

Hello,
The TechNet Sandbox forum is designed for users to try out the new forums functionality. Please be respectful of others, and do not expect replies to questions asked here.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

HT201412 I have a problem connecting to the server (SSL problem) on my new Apple ipad. I was supplied with a new ID password, but I am unable to get into my settings and email. Could someone please offer a suggestion? Thanks! A.A.

I have a problem connecting to the server (SSL problem) on my new Apple Ipad (iOS6). When submitting my Apple ID password, I am prevented from signing in to a secure connection due to an SSL problem. Any suggestions ?? Thank you!

Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer.

HT1338 iMac and SSL problem

I have an iMac operating under OS X. Where can I find a patch for the SSL problem that reently occurred?

There is none required for 10.3 or earlier. For Mountain Lion look here: Apple Security Update 2014-001. For Mavericks use App Store for the software update.

When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

Why am I having update problems again?

When I started Muse today I received a message that there was a new update and did I want to install. I said yes and it proceeded, when complete I received this pop up message:
Title, Adobe AIR - "Intial content could not be loaded for this application. Try re-installing or contacting the publisher for assistance".
But you can't re-install because it shows it's already installed. This happen to me a month ago and I had to un-install Muse & reboot before I could re-install.
Why is this happening? Is there a way I could open up Muse without going through a un-install again. This only happens with Muse updates which occur when starting Muse, other Adobe updates that take place through the Creative Cloud control panel are fine.
I just tried again, same problem

Help Again.
My computer just doesn't like Muse & apparently CC programs. After all this time when starting Muse I have been ignoring the message to update because I'm afraid if I say yes I will have the above problem again. Today I got brave and said yes and Muse would not open again!
So I returned to this site and used the link you gave me before to reinstall Muse, when it finished it told me that there was a newer version 7.4 available and would I like to install it and I said yes, and it seemed to work and opens fine.
I also had a request to install the latest update of Creative Cloud so I said yes. Everything went fine. I got really brave and I noticed that there was a newer version of Muse CC 2014 and I installed it but now that CC and other CC programs tell me I need a sign in with my adobe ID to try a 30 trial, if I press the License This Software button it asks me for a Serial Number. Why can't I open CC programs without a serial number, I am a Creative Cloud member? I have 2 Icons on my desktop, Adobe Muse.exe which works and Adobe Muse CC that tells me I need a serial number.

My Iphone Has a Restart Problem Again and Again wot To do?

MY Iphone Has a restart problem again and again wot to do please tell me

Basics from the user guide are restart, reset, restore from backup, restore as new. If you go through ALL of those steps and you still have issues, you need to get your phone checked out by Apple.

A dns problem again?

I sent email to [email protected] but the engineer there said he did not receive it. Also, I did not receive the email he sent to me through his sun.com email. it sounds a dns problem again.
I have changed our mx record to:
@ IN MX junk.domain.com.
before, it was:
@ IN MX junk ==>would this cause dns problems?
Here is the entry in the mail.log which seemed that sun has received my email successfully:
09-Dec-2005 09:39:10.59 tcp_local D 2 [email protected] rfc822;[email protected] [email protected] dns;btmx1.sun.com (relay1.sun.com [IntraStore TurboSendmail] ESMTP Service ready) smtp;250 recipient <[email protected]> OK

Your log shows that Sun did indeed receive your mail.
Sun's mail infrastructure has been under DOS attack for some days. Sometimes that's caused delays of up to several hours for inbound mail to get to us.
We also have had some virus infected systems pounding our servers. More delays.
We do contract with an external company to scan for spam/virus scanning. Those folk historically have lost us some mails, too.
Your MX record isn't likely to make any difference in you sending out mail, but in your ability to receive mails, yes.

Performance Problem Again

Hi all,
We are encountering performance problem again
The batch process deletes 1M rows every night which took 30mins the usual.
But last night (12AM) it took more that 2hrs and hangs.
Does it help if I run gather_schena stats regularly when there is constant DELETE on the table?
Please help me check our ASH, AWR, ADDM to resolve the issue.
ADDM
https://app.box.com/s/7o734e70aa2m2zg087hf
ASH
https://app.box.com/s/xadlxfk0r5y7jvtxfsz7
AWR
https://app.box.com/s/x8ordka2gcc6ibxatvld
Thanks....
zxy

Hi ARM,
***What is the SGA_TARGET or MEMORY_TARGET that the database is running on?
Our server has 8Gb Physical Memory and 8Gb Swap.
What is the ideal SGA_TARGET and MEMORY_TARGET shouldbe?
Our current setting is:
========
SQL> show parameter memory
NAME                                 TYPE        VALUE
hi_shared_memory_address             integer     0
memory_max_target                        big integer 5936M
memory_target                                big integer 5936M
shared_memory_address                 integer     0
SQL> show parameter sga_
NAME                                 TYPE        VALUE
sga_max_size                         big integer 5936M
sga_target                               big integer 0
Thanks

Post Moved BT Problems Again

Post moved to infinity board http://community.bt.com/t5/BT-Infinity/BT-Problems-Again/td-p/544347
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I was going to put it in the Infinity forum but as there were other similarish ones here, and that my problem is reagrding a connection issue (my modem gets Inifinity just fine), I thought thought the connection issues forum would be the correct place.
Also as HH3 is not Infinity specific, I thought the problem was not necessarily Inifinity specific either
Even so, thanks for putting in the correct place.

Problem again with flickering and no firmware update

I've got the problem again....
I think I'll leave Imac world ....

I had the flickering problem with my new iMac, it was resolved with the new software update to 10.4.6.

SSL Problem in Flex

I am using Flex with PHP via AMF PHP. Building application
was fine. But it gave me problem when I deployed it to server which
sits behind SSL layer. The problem is not associate with data
accessing I can access data very well but I when I go to any other
page after visiting flex part it just kicks user out to login page
again. If I simply use HTTP protocol it does not happen but if I
use HTTPS protocol it does. I did intense research in this problem.
I tried following solutions.
USE crossdomain file name crossdomain.xml
loadpolicy file
class="mx.messaging.channels.SecureAMFChannel" in
service-config.xml
class="flex.messaging.endpoints.SecureAMFEndpoint" in
service-config.xml
lastly here is my crossdomain.xml
<?xml version="1.0" ?>

<!DOCTYPE cross-domain-policy SYSTEM "
http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" secure="false"
to-ports="443"/>
</cross-domain-policy>
All this solution mentioned in different websites including
flex documentation didn't worked. It's not the problem from PHP
side since it works perfectly with Flex if I use HTTP protocol so I
think problem is in Flex side. I read in this website
http://www.onflex.org/ted/2005/11/using-flash-player-under-https-with.php
that flash player have bugs and so, I tried to solve this
problem by using cross-domain.xml file but unfortunately this
didn't solve the problem. Any help will be greatly appreciated.

with some additional attributes added on to server.xml <Connector /> tag application is loading fine in local environment.
<Connector port="8443" protocol="org.apache.coyote.http11.Http11NioProtocol" bufferSize="64000" maxHttpHeaderSize="64000" socket.appWriteBufSize="64000" socket.appReadBufSize="64000" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" keystoreFile="C:\Users\user_name\.keystore" keystorePass="*****" allowTrace="false"/>
But the same changes are not working in UAT environment, any clue on it will help me.
thanks in advance.

SSL Problem again!!!

Similar Messages

Maybe you are looking for