Ssl VPN client for Vista doesn't work

I'm trying to find a way for my client swho are upgrading the PC to Vista to connect using web VPN to a ASA 5510.
any help would be great

I don't have experience with the ssl client and vista, but I do use the new Anyconnect SSL client with vista. All you need to do is upgrade the ASA to version 8. Hope that helps.

Similar Messages

Is there a 64-bit version of the VPN Client for Vista coming?

Is there a 64-bit version of the VPN Client for Vista coming for the VPN 3000 series concentrators?

February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected.

Anyconnect SSL-VPN - DNS Lookups (external) doesn't work

Hello,
I have issues with my SSL AnyConnect VPN setup on my ASA 5512-x. The VPN , split tunneling and NAT exempt is working fine and i can connect to internal hosts.
However, external or internal DNS requests doesn't work on the clients (Windows, Anyconnect). I want full split tunneling, ie DNS requests should not go through the VPN.
The DNS requests works through NSLOOKUP but not in ping and in any browser.
(The config, request more if i've omitted something important).
ASA Version 8.6(1)2
access-list vlan42-splittunneling standard permit 192.168.42.0 255.255.255.0
ip local pool vlan42test 192.168.199.50-192.168.199.55 mask 255.255.255.0
address-pools value vlan42test
nat (any,any) source static any any destination static VPN-pool-range VPN-pool-range
object network VPN-pool-range
range 192.168.199.10 192.168.199.254
webvpn
enable Outside
anyconnect image disk0:/anyconnect-win-3.1.04072-k9.pkg 1
anyconnect enable
group-policy vlan42-clientvpn-policy internal
group-policy vlan42-clientvpn-policy attributes
wins-server none
vpn-tunnel-protocol ssl-client
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vlan42-splittunneling
default-domain value doesntmatter.local
split-dns value doesntmatter.local
vlan none
address-pools value vlan42test
vpn-group-policy vlan42-clientvpn-policy
vpn-simultaneous-logins 20
service-type remote-access
tunnel-group vlan42-con-profile type remote-access
tunnel-group vlan42-con-profile general-attributes
authentication-server-group ah
default-group-policy vlan42-clientvpn-policy
tunnel-group vlan42-con-profile webvpn-attributes
group-alias privatecloud42 enable
group-url https://vpn.**.com/privatecloud42 enable
I gladly appreciate your help. Thank you.

I don't have experience with the ssl client and vista, but I do use the new Anyconnect SSL client with vista. All you need to do is upgrade the ASA to version 8. Hope that helps.

VPN client for Vista

I am using Vista with Cisco vpn Client 5.0.1.0600 and i receive.
Secure VPN Connection terminated locally by the client
Reason 418: Unable to configure the Firewall software.
The Windows Firewall is already disable and the proble only arrive on Vista computer, not XP. I am using a ASA5510 release ASA 8.0
The problem is for internal support user(in Vista) trying to connect to the different customer outside the network

Rose,
Most likely the group that you are trying to connect to on the ASA has the integrated firewall feature. This feature is not supported for windows Vista Clients.
You can disable this on the ASA by getting into the group polices:
ASA(config)# group-policy "VPN group name" attributes
ASA(config-group-policy)#client-firewall none
If you have other clients connecting fine and you don�t want to do this change, you can configure a new group for the Vista Clients without the integrated firewall feature.
Regards,
~JG
Please rate helpful posts

FortiClient SSL VPN Client Not Functioning Correctly

Hello,
I use the FortiClient SSL application to connect to work. In Windows 7 x64 it works without issue. In Windows 8 Build 9200 it exhibits and odd behaviour.
I can connect using FortiClient version 4.4.3.445. Once connected my sent bytes continues to increase which is correct. However received bytes stays at 0.
If I try to Remote Desktop it fails. This is obviously due to no inbound packets coming back from the Fortigate appliance being allowed back to Windows 8.
Disabling the Firewall doesn't have any affect on the condition. Received bytes stays at 0.
This is a clean install with no 3rd party applications, other than the Forticlient software. This is only the SSL VPN portion of the the FortiClient software and does not included AV or Firewall options.
Doing some Googling, I've seen some other people with the same problem but no resolution. Another FortiClient user and Sophos & Juniper SSL VPN clients having the same problem.
Does anybody have any idea what would be causing the SSL VPN to only send bytes but not receive.
Thanks!
UPDATE 2:
In the built in MSTSC.exe "Remote Desktop" I went into Options/Advanced/Server Authentication. I switched the setting to "Connect and don't warn me" and that fixed the problem. The default was "Warn Me' However the warning screen was not coming up.
Just for the heck of it I switched it back to the default settings and saved. Strangely I now get the "Warning" screen that you would normally see. So now both the built-in and App Store Remote Desktop applications are working. FortiClient still shows Bytes
received as 0.....which is odd.
UPDATE: Solved Workaround
I was using the built-in Remote Desktop Application without success. I went into the APP Store and saw their was an APP called "Remote Desktop" I installed that and connected my FortiClient SSL to work. Still no received bytes like I would get in
Win7. I then launched the "APP" Remote Desktop, punched in my PC name at work and creds and boom I can login to my work PC. FortiClient SSL still showing no received bytes, but the "Remote Desktop" from the APP store does work. Not sure why MSTSC.exe will
not work, and why FortiClient shows no received bytes is still unsolved. At least the APP Store Remote Desktop works with the SSL Client.

Hello Everyone,
I finally able to track down the issue .
After spending 3 days i found that VPN Client may bind some setting with user. I tried to install the same on my personal laptop and another machine where the user bind with same account
(hotmail).
Then I realize may be this is user issue so I follow below steps and it work fine.
1. Uninstall Client from Machine
2. Remove same from IE ( Options =>> Connections)
3. Restart System
4. Create Local user and provide administrator rights.
5. Login with new user and logoff all other.
6. Install Client.

SA540 SSL VPN Client will not install on Windows 7

I had the SSL VPN Client working on my Windows 7 laptop. I tried to use the SSL VPN through Firefox and now my client does not work on IE anymore.
The install process beings and the progress bar makes it halfway before I get an error saying the install failed.
I tried everything I could to remove the SSL VPN client manually. I even followed the instructions posted at the end of this forum posting: https://cisco-support.hosted.jivesoftware.com/thread/2018716?decorator=print&displayFullThread=true
Nothing has worked.
The best I can find is the VPN Client is crashing during install. I saw this in the Event Log.
Fault bucket 177244756, type 5
Event Name: PnPDriverInstallError
Response: Not available
Cab Id: 0
Problem signature:
P1: x64
P2: E0000234
P3: ssldrv.inf
P4: 93775c2b0faa616bc11a47d4ff617aa8d00cd56f
P5: SSLDrv.Ndi
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Users\shudson\AppData\Local\Temp\DMIE984.tmp.log.xml
C:\Windows\inf\oem54.inf
These files may be available here:
C:\Users\shudson\AppData\Local\Microsoft\Windows\WER\ReportArchive\NonCritical_x64_d317f66069d2e3b17f6bc1e7306afd9085494a_1020fe2c
Analysis symbol:
Rechecking for solution: 0
Report Id: 75c67e96-1882-11e0-8e4d-5c260a0235ed
Report Status: 0
I then used AppCrashView to see the crash report and I get this:
Version=1
EventType=APPCRASH
EventTime=129386443518175301
ReportType=2
Consent=1
UploadTime=129386443518799293
ReportIdentifier=2a4c4f0a-183c-11e0-aac2-5c260a0235ed
IntegratorReportIdentifier=2a4c4f09-183c-11e0-aac2-5c260a0235ed
WOW64=1
Response.BucketId=2007535968
Response.BucketTable=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=VirtualPassageExe.exe
Sig[1].Name=Application Version
Sig[1].Value=1.7.3.1
Sig[2].Name=Application Timestamp
Sig[2].Value=4b20cf25
Sig[3].Name=Fault Module Name
Sig[3].Value=OLEAUT32.dll
Sig[4].Name=Fault Module Version
Sig[4].Value=6.1.7600.16567
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=4bbc2f3d
Sig[6].Name=Exception Code
Sig[6].Value=c0000005
Sig[7].Name=Exception Offset
Sig[7].Value=00004660
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.1.7600.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
DynamicSig[22].Name=Additional Information 1
DynamicSig[22].Value=0a9e
DynamicSig[23].Name=Additional Information 2
DynamicSig[23].Value=0a9e372d3b4ad19135b953a78882e789
DynamicSig[24].Name=Additional Information 3
DynamicSig[24].Value=0a9e
DynamicSig[25].Name=Additional Information 4
DynamicSig[25].Value=0a9e372d3b4ad19135b953a78882e789
UI[2]=C:\Users\shudson\CiscoCisco-SSLVPN-Tunnel\VirtualPassageExe.exe
UI[3]=VirtualPassageExe MFC Application has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Users\shudson\CiscoCisco-SSLVPN-Tunnel\VirtualPassageExe.exe
LoadedModule[1]=C:\Windows\SysWOW64\ntdll.dll
LoadedModule[2]=C:\Windows\syswow64\kernel32.dll
LoadedModule[3]=C:\Windows\syswow64\KERNELBASE.dll
LoadedModule[4]=C:\Windows\system32\MFC42.DLL
LoadedModule[5]=C:\Windows\syswow64\msvcrt.dll
LoadedModule[6]=C:\Windows\syswow64\USER32.dll
LoadedModule[7]=C:\Windows\syswow64\GDI32.dll
LoadedModule[8]=C:\Windows\syswow64\LPK.dll
LoadedModule[9]=C:\Windows\syswow64\USP10.dll
LoadedModule[10]=C:\Windows\syswow64\ADVAPI32.dll
LoadedModule[11]=C:\Windows\SysWOW64\sechost.dll
LoadedModule[12]=C:\Windows\syswow64\RPCRT4.dll
LoadedModule[13]=C:\Windows\syswow64\SspiCli.dll
LoadedModule[14]=C:\Windows\syswow64\CRYPTBASE.dll
LoadedModule[15]=C:\Windows\syswow64\ole32.dll
LoadedModule[16]=C:\Windows\syswow64\OLEAUT32.dll
LoadedModule[17]=C:\Windows\system32\ODBC32.dll
LoadedModule[18]=C:\Windows\syswow64\SHELL32.dll
LoadedModule[19]=C:\Windows\syswow64\SHLWAPI.dll
LoadedModule[20]=C:\Windows\system32\apphelp.dll
LoadedModule[21]=C:\Windows\AppPatch\AcLayers.DLL
LoadedModule[22]=C:\Windows\system32\USERENV.dll
LoadedModule[23]=C:\Windows\system32\profapi.dll
LoadedModule[24]=C:\Windows\system32\WINSPOOL.DRV
LoadedModule[25]=C:\Windows\system32\MPR.dll
LoadedModule[26]=C:\Windows\system32\IMM32.DLL
LoadedModule[27]=C:\Windows\syswow64\MSCTF.dll
LoadedModule[28]=C:\Windows\system32\odbcint.dll
LoadedModule[29]=C:\Windows\system32\uxtheme.dll
LoadedModule[30]=C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.7600.16661_none_ebfb56996c72aefc\COMCTL32.DLL
LoadedModule[31]=C:\Windows\system32\dwmapi.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=APPCRASH
AppName=VirtualPassageExe MFC Application
AppPath=C:\Users\shudson\CiscoCisco-SSLVPN-Tunnel\VirtualPassageExe.exe
None of this makes any sense to me, but may someone can tell me why the install is failing?
Thanks,
Scott

Mario,
I tried everything you mentioned. I cleared cookies and temporary files. I enabled SSL 3.0. I restarted IE.
I get the same thing. The install process starts and then ends at suddenly saying the install failed.
Scott

VPN Client for 64 BIt OS

Cisco VPN client is not working with 64bit OS, please let me know if there is any solution to use VPN client with 64bit OS

You need SSL VPN solution for 64BitOS , WebVPN - Anyconnect client - Any ASA5500
See this link for all your Q&A section
SSL/IPsec VPN Services for the Cisco ASA Series
http://www.cisco.com/en/US/prod/vpndevc/ps6032/ps6094/ps6120/asa_ssl.html
Details in SSL licensing
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/prod_brochure0900aecd80402e39_ns347_Networking_Solutions_Brochure.html
Clientless SSL VPN (WebVPN)
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00806ea271.shtml
See SSL VPN/Web VPN mid page down to learn different types of WebVPN/Annyconnect deployment scenarios
http://www.cisco.com/en/US/products/ps6120/prod_configuration_examples_list.html
Regards
PLS rate helpful posts

Watchguard SSL VPN client on OSX 10.7 Lion TUN/TAP Kernel Problem

I upgraded to OSX 10.7 Lion and lost the use of the Watchguard VPN client.
I eventually found a solution at http://lesmond.net/2011/07/watchguard-ssl-vpn-client-on-osx-10-7-lion/
I had already uninstalled Watchguard VPN and tried to reinstall to see if that worked (poor advice from another forum)
I hadn't manually removed Watchguard icon from the dock.
When you try to reinstall the dialog tells you to run an postupgrade script on the TUN/TAP kernel and then quits with a fail.
If you install openVPN in this scenario you get an openVPN app and menu item, both of which do nothing.
Click on the Watchguard dock icon and connect.
I was then asked to upgrade and ended up with the run post upgrade script dialog and quit with a fail.
I then clicked on the Watchguard doc icon again and connected.
This time it connected with no problem.
Hope this helps!

WG has new firmware that will fix the problem, once flashed, download the new client vpn client (11.5.1) and you should be good to go.
I had to contact WG to get the patch as it was not in the portal Version 11.3.4 CSP6 for my device. Hope this helps someone.

Quicktime for windows doesn't work, wont let me uninstall or update.Help!

Quicktime for windows doesn't work, won't let me uninstall (tells me fatal errro) or update (tells me it encountered an error on installation). Help!I am running Windows XP on an Intel pentium PC. Any ideas? Dvora

When you get this fatal error uninstalling, try a full removal of iTunes and related programs with an installer clean up of any that do not uninstall cleanly:
Here is a method:
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program.
To run the program – All Programs>>Windows Install Cleanup
http://support.microsoft.com/kb/290301/
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.

Starting vpn client on vista

Hi,
When I start the vpn client on Vista I everytime we get a screen with the
message : an unidentified program wants access to your computer. This
message is in an orange bar and the window itself is from user account
control.
How do I get rid of this message without turning off UAC?
regards,
John

I was wrong - my Vista sp1 also gives me UAC warnings when I start the
VPN client.
I wish I could find a way to elevate priveleges on an
application-by-application basis to eliminate the prompt, but the best
I could do is described in the following web site:
http://www.informationweek.com/blog/.../dont_shut_off
_v.html
I'll paste in the paragraph of instructions that made the prompt go
away for me:
"Click Start and Control Panel. Switch to Classic View (if you haven't
already) and click on the Administration Tools icon. In the list that
opens click on Local Security Policy, and in the next window, Local
Policies (a tiny bit redundant, but all UIs can't be perfect -- If UAC
is running you'll get a UAC pop-up somewhere in here). In the Local
Policies list click Security Options, and scroll down to "User Account
Control: Behavior" (the full title of the policy is "User Account
Control: Behavior of the elevation prompt for administrators in Admin
Approval Mode" but the window barely opens that far). Double-click the
title and in the dialog box change its setting from "Prompt for
Consent" to "Elevate without prompting." Click OK and the urge to tear
your hair and scream at your PC will be greatly diminished in the
future."
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Is there an Oracle VPN client for Linux (64-bit) ?

Does anyone know if there is an Oracle VPN client for Linux (64-bit) ?
Where to get it ?
How to install it ?
thanks!
Greg

Perhaps OpenVPN will work for you. Unfortunately you did not provide any OS information and VPN requirements.
You can find help to install and setup OpenVPN in Google. You might want to check the Fedora EPEL repository http://fedoraproject.org/wiki/EPEL to install the software using standard yum in Enterprise Linux.

How to create a VPN client for Windows Phone 8.1?

We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?

The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

SSL VPN Client Error

I setup a Cisco ASA 5510 SSL VPN with the folowing;
IOS 7.2
SSL VPN CLient sslclient-win-1.1.1.164.pkg
Out of 400 users, there is one user having problem installing the SSL Client to his laptop. The user laptop information is;
IBM Thinkpad T40
Windows XP SP 2
Internet Explorer 7
All patches up-to-date
All drivers up-to-date
SSL VPN Client connection process;
- User login with valid account and password
- The SSL VPN Client package will automatically download and installed.
- User will then be connected to SSL VPN
The ERRORS;
1. GUI (Cisco SSL VPN Client installation process)
"The SSL VPN Client driver has Encountered an Error"
2. Event Viewer
The only error in this user event viewer that differs from other users who successfully connected are;
a)
Function: EnableVA
Return code: 0
File: e:\temp\build\workspace\SSLClient\Agent\VAMgr.cpp
Line: 310
Description: unknown
b)
Function: EnableVA
Return code: 0xFE080007
File: e:\temp\build\workspace\SSLClient\Agent\VpnMgr.cpp
Line: 1145
Description: VAMGR_ERROR_ENABLE_VA_FAILED
Anyone know what thus the error means?
BTW, anyone know the link to SSL VPN knowledgebase. i.e errors, root cause, solutions?
Thanks

The Cisco SVC provides end users running Microsoft Windows XP or Windows 2000 with the benefits of a Cisco IPSec VPN client without the administrative overhead required to install and configure an IPSec client. It supports applications and functions unavailable to a standard WebVPN connection.
http://www.cisco.com/univercd/cc/td/doc/product/vpn/svc/svcrn110.htm

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

I have an Iphone 3GS and the app for Facebook doesn't work anymore...

I have an Iphone 3GS and the app for Facebook doesn't work anymore since last update made yesterday.
How can I restore it without the last update?
Or, what can I do to have the Facebook back again on my mobile?
Thank you for your help.

Hi Ricoco,
I too had exact issue what you were experienced, then I went to Apple autorised service center and submitted my earpods, their it worked with all versions of Apple iphones, but it didn't worked on my 3gs. The service technician suggested for OS upgrade.Then I came home and I took the backup and upgraded 5.1 to 6.1 as he suggested, also it didn't worked. I was totally frustated and suddenly I got an idea!. What a funny thing here is, a safety pin resolved my issue, I took out all dust which was there in the jack hole. Then I check my earpods, it was amazing you know..MY EAR PODS WORKED!.
If you still have this issue, I hope this will help you.
Umesh

Ssl VPN client for Vista doesn't work

Similar Messages

Maybe you are looking for