SSLVPN connectivity issue with Windows 7 x64 All browsers.

I think that I have tried everything to get this working but whatever I seem to do I cannot connect to my SSLVPN using Windows 7 x64. The 32bit version is fine. I have installed the Microsoft C++ Redistributable 2010 and 2005 for both x86 and x64. I have tried clearing the cache in the Browser. I have installed Chrome and Firefox , I even started my laptop using the 'Disable Driver Signature Enforcement' from Advanced Boot options but nothing is working.
Does anyone have anything else to try. This is a bit of a showstopper for us because not do we have this issue with Windows but we have Mac users as well and that is also an issue.
Cisco really needs to fix this issue fast...
Please help.
Thanks
Mark Sheehan

Try using both the 32-bit and 64-bit versions of Internet Explorer. Sometimes one of the two will work.

Similar Messages

I have Snow Leopard 10.6.8 on my MacBook. Constantly dropping internet connection or message "error connecting to the network" comes up. No wireless connectivity issues with windows 7 laptop or iphone.

I have a MacBook with Snow Leopard 10.6.8. The last few weeks it has been constantly dropping internet connection, and one of these messages appear on the page: "Safari cannot open this page because the server where this page is located isn't responding" or "Safari cannot open this page because you are not connected to the internet" comes up. I will check Wifi and I am connected. No wifi connectivity issues with iphone or windows 7 laptop, this doesn't happen with either of those devices. I have unplugged and reset router, cleared cache, still happening. Any ideas? Thanks in advance.

Hi BCLor!
Try using the suggested steps in the following article to help you troubleshoot this issue with your Wi-Fi connection:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Adobe Connect issues with Windows 7

Has anyone found a solution to the problems Adobe Connect has with Windows 7?

Sounds like something is blocking network traffic. I'm not aware of any Windows 7 specific issues. I've used Windows 7 with connect for 2 years with no Windows specific issues.
I'd call support at 800-945-9120 and see if they can indentify the issue and give you a resolution.

Lumia 820 connection issue with Windows 7

Hi there, I'm hoping someone can help me. Up until about 2 weeks ago I could connect my Lumia 820 directly to my PC (running Windows 7) without the windows phone app. Windows would detect the phone as an external drive and it would appear in Windows explorer. Since after the new year (I uploaded music to the phone for NYE successfully), there is a connection issue. Windows sees the phone in 'Devices and Printers' but not in Windows Explorer. I downloaded the windows phone app and this doesn't connect. Windows 7 is fully updated, including the new service pack.
I have attached a screen grab to illustrate my issue. Any help would be greatly appreciated.
Attachments:
lumia-connect-issue.jpg ‏204 KB

Sorted. It was a case of turning the phone off and on again. *sigh*, bloody billyware **bleep**!

HP Photosmart D110 connectivity issue with Windows 8.1

Month back, i have upgraded my Dell inspiron to windows 8.1 and from that time onwards i am facing issues with connectiveity to HP photosmart D110 printer over my wireless network.
I installed the printer driver, once it is installed fine. i can see the printer, take out few prints. Then i shutdown my laptop. Next time i reboot. I launched HP Solution Center and turned on my printer. It showed up problem with with HP solution center saying " HP Solution Center can not run becuase your device installation is not complete" i have to the printer and devices setting on control panel i could see the printer but it is offline. I checked my connections with the printer. also ran the wireless network test. Everything comes fine.
To resolve the problem, i thought may be let me re-install. I finished reinstalling and then it worked fine. But every restart i faced the problem. I add the add the same printer again and again everytime using installation and reinstallation. This sucked. I googled and downloaded HP doctor software. That fixed the problem so far and i had to run the doctor connect the printer everytime.
Now even HP doctor is not working, it list all the multiple installation of the same printer and none of them gets connected. This is getting little crazy for me.
I need some advice, I appreicate your help in looking into it. If someone has some suggestion to deal with Windows 8.1 and have faced similar problem or can suggest some solution. I will be greatful.
Thanks,
AKS309

Hi,
When using "beta" version of any software (even with NEW full software), users have to accept the risk of some hardware do not proper functioning. Many HP test guys/girls may face this similar problem in their test lab(s), they may be able to find a solution OR push it back to Microsoft to fix the problem, therefore users (you and me) have to wait.
I woul remove/unistall its driver then start from beginning.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Airport Extreme 802.11n connectivity issues with Windows Vista

I recently purchased the 802.11n airport exterme base station and set it up using my MacBook Pro laptop. During the configuration process I set the security to be WEP enabled since there are other computers on my network, one of which has only an 802.11b wifi card, that can only accept WEP security protocol. The set up worked great and I was surfing on the internet with my Mac in no time.
When I go to connect to the 802.11n extreme base station with my Windows Vista desktop PC, I cannot get any type of connection. I re-entered the Network SSID to match that on the AE base station and re-entered the WEP enabled password.
Is there a compatibility issue between the Airport Extreme Base Station and Windows Vista? I realize that the base station works on XP based PCs but not sure why it could not work on a Vista machine. Any help anyone can offer would be greatly appreciated.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Upon further review I determined the flaw with my earlier attempts to set up the airport exterme base station with my winodws vista desktop pc. I realized that I should not use a WEP key but rather a WPA key since the wireless adpater connected to my desktop is a wireless G enabled adapter that can handles WPA and WPA2 security.
Therefore, no issues with Vista and the airport extreme base station. Works great.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

E1200 router connectivity issue with windows 7 computer from sleep state over night

recently purchased the e1200 and setup was a breeze but I'm having difficulty with the primary computer (windows 7) connected to it, by wire, haven't used any wireless yet. When the computer is put to sleep through the night, I have to restart the computer the next morning to get a signal but works fine if put to sleep during the day and awakened the same day to use the connection. Have a second computer wired directly to the modem with vista that doesn't have this issue. any thoughts out there. thanks

Try this. Go to Control Panel>Click on Network and Sharing Center or Network and Internet and then Network and Sharing Center>Click on Change Adapter settings>Right Click on Local Area Connection (the adapter being used for the wired connection)>Click on Properties>Click in Configure>Go to the Power Management tab>Uncheck "Allow the computer to turn off the device to save power"

Wifi connectivity issues with windows 10

I am unable to connect to my Wifi network following upgrade to windows 10

I would look into updating the firmware of the wifi router solves problems for many people

Anyone had an issue on iphone 4s where bluetooth connects one day and then the next will not discover anything, but then a little while later it works again? I have 2 audio devices and an apple keyboard that I have this issue with. Effects ALL.

I have an iphone 4s. A while ago it started having issues with bluetooth. All of the sudden, an audio headset I am using quits working with my iphone bluetooth. I check and my iphone doesn't see any of my bluetooth devices. I have an apple keyboard, a headset, and a speaker. Nothing shows up on my iphone but they all connect perfectly to my ipad. Then a day or so later it works again. The are all suddenly there. I just installed iOS7 and I'm still having the same problem. What is UP? Anyone have a clue what is going on?

I have this problem too. I have an iPhone 4, and this wasn't a problem when I bought the phone back in December. I think it came a month or so later and I suspect with a standard upgrade of something like itunes, or iphone software... but I can't pinpoint it to any specific update as it took me a while to notice it. For me, it does this with my work calendar which is run through Microsoft Outlook. But it's the exact same thing - and it means my calendar isn't reliable anymore.
I've made sure the time-zone settings are correct, I've updated all software, and gone through all possible settings for both my i-phone and Outlook. Nothing fixes the problem, even our tech guy at work didn't know what to do. I know it's not just my phone as the exact same thing has happened with my boss's iPhone which is an iPhone 3G, and it frustrates him to no end.
I'm really hoping someone at apple can tell us what's going on, especially since it never used to do this and there doesn't seem to be any way to fix it. If someone thinks they know what itunes update this was due to, let me know - I'll see if I can go back to that older version.

SQL Developer connection issue with JDBC

Hi skutz & friends,
I have problem with Oracle SQL Developer I can not connect to any oracle db
because Status : Failure -Error loading native JDBC driver library.
However, I download SQL developer [ Oracle SQL Developer for Windows (JDK1.5.0_06 is bundled in this zip) ]
After it is not working. Also I download JDK 5.0 Update 14
The Java SE Development Kit (JDK) to install it on my PC again.
But it does not work. My install path information:
install path as C:\Program Files\SQLDEVELOPER_INSTAL\sqldeveloper
local oracle as !0g 10201
SQL version as sqldeveloper-1.2.1.3213 which download last versionfrom OTN on 2/18/2008.
for connection, taken basic.
port as default 1521
hostname and saver name are same.
I created a environment variable in window xp.
SQLDEVELOPER_USER_DIR AS C:\Program Files\SQLDEVELOPER_INSTAL\sqldeveloper
can anybody help me with this connection?
thanks
Jimmy

Duplicate thread: Please enter all responses on other thread: SQL seveloper connection issue with JDBC

Anyone else having repeated wifi connectivity issues with the OSX version 10.8.5?

I just updated the software on my iMac to OS X version 10.8.5. Now I am having repeated connectivity issues with the wifi in my house. This is the only device that is having these issues. My phone, ipad and tv are not having any problems at all.
It happened immediately following the update. I was sending emails and browsing before the update without a problem.
from apple:

I had a message like that last week - only it asked what browser I would be using - I just quit safari - purges caches etc - and at that time noticed I was getting RSS feeds through PUBSUB - tracking them down to the top sites view I never use - I deleted all of the top sites (most of which I don't go into so it must have been a preset) that included MSN and Google - I don't use google so that was pointless. (deleting a top site means you are blocking it from that page) Have not had the message since so it must have had something to do with top sites activity.
Just a note: Did see somewhere probably BBC tech - that Google was going to stop supporting older web browsers.

SAP GUI Compatibility issue with Windows 2008R2 64 Bit

Hi Gurus
Is anyone experienced connectivity issue with SAP GUI (32bit) on Windows 2008R2 64bit? Except base version of 7.3 every Service Pack failing
to connect, Strange thing was it was working with SP5 in WINDOWS 7 64bit.
Your inputs greatly appreciated.
-giri

Hi Giri
Yes, You can do the normal installation on windows 2008 / 2008 R2 systems. we are using in our environment. is this any error message while installation or SAPGUI execution time?
Refer the SAP Note 66971 - Supported SAP GUI platforms
BR
SS

Connection issues with EA4500

I had bad connection issues with my mobile device, so i pressed reset on my EA4500 router, and now when i connect to my network, it gives my limited connection even though i have 5 bars of signal. Not sure what to do now...

Resetting the router will erase all the settings you configured on the router since the initial setup. You manually configure the router's wireless settings so your wireless devices can have internet access again.
Procedure: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cfb50c0dc992443ab2405a782cca60f7_19073.xml&pid=80&...
Make sure to use a computer that is hardwired via Ethernet cable to the router.
For bad connection issues: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=cf6ed888ce144d06905af4987887fd1b_KBxxxx_EN_v1.xml&...

Major Issues with Windows XP and Sound Blaster Audig

As mentioned in the post title, I'm using a Sound Blaster Audigy 4 card (recently purchased) and am having issues with Windows XP apparently because of it. When the card is physically installed, but the drivers are not, there are no problems. However, when the drivers are installed, Windows XP's "explorer.exe" crashes on boot, locking up the start menu and any other open windows. Now, I can manually end the explorer.exe application and then reboot it, and things will work... however, I cannot imagine that that is the intended functionality of this card. Additionally, I suspect the card in the failure of a game (Eve Online) but I would assume the issues are related. I've already narrowed the issue down to the Sound Blaster drivers. I've tried booting with the SB drivers but without the video card drivers, and the problem recurred. Every time I boot with the SB drivers installed, it fails. Without them, things seem to run normally. If it helps, I'm using an Intel Core 2 Duo E6400 processor, with GB of DDR800 RAM. I've installed Windows Service Pack 2 and all the other updates. The video card is a Geforce 7950 GT, with the latest NVidia Forceware (93.7) drivers. I've had this problem with both the Audigy drivers on the CD that came with the card and the newest ones downloaded from this website. My motherboard is a Gigabyte GA-965P-DS3, which includes onboard sound hardware, but I have disabled it at the BIOS level. I can provide dxdiag information or anything like that if necessary. Does anyone have any advice, suggestions, or have you encountered a similar problem?Message Edited by DerekKatz on 2-04-200603:2 AM

Thanks for the helpful reply Dan
I ran the file, CTZAPXX.exe, like suggested, and it ran without a problem. It installed the files and even required me to reboot my computer!!
However, after a computer restart, I am still in the same boat. Codecs are installed, but the location of the device is "unknown". In Device manager, there are no unknown devices; it shows the codecs in the sound tab, but no actual hardware; as if my sound card does not exist.
I use my computer for music, and my buddy needs me tomorrow night to play some music stored on my computer. I really do appreciate the help I am offered. I do not mean to sound impatient, but I really need this device fixed, or I will have to have him buy me a sound card....

Itunes issues with Windows having to do with Apple's patent

I had a thought and am not sure if it's right. I was wondering if myissues with Apple Itunes store on Windows 7 has anything to do with the Patent laws and all with Apple and samsung and all that.

I had the same issues with Windows 8 Consumer Preview. I installed on a fresh system and still had issues.
I experienced extreme lag, with pretty much everything, and iTunes freezing once I attempted to change the currently playing song.
I had a mess with compatibility mode and found out that running it in with Compatibility mode enabled for Windows XP (Service Pack 3) and as an administrator fixed it. It works now, however, there is a popup message that comes up on launch telling you to change the compatibility settings, but pressing "OK" makes it go away.
How?
Open Windows Explorer, and navigate to: "C:\Program Files\iTunes" (For 32bit) or "C:\Program Files (x86)\iTunes" (For 64bit), unless you changed it.
Right-click on "iTunes.exe", select "Properties" from the context menu, and click the "Compatibility" tab.
Under "Compatibility mode" check off "Run this program in compatibility mode for:" and select "Windows XP (Service Pack 3)" from the drop down menu.
Further down under "Privilege level" check off "Run this program as an administrator".
Click "Apply" and "OK".
Should fix any issues, I have my default iTunes Media Folder Location within an external hard drive so unplugging all of my USB's wasn't an option.
Hope I helped!

SSLVPN connectivity issue with Windows 7 x64 All browsers.

Similar Messages

Maybe you are looking for