SSM 7.5 - Xcelsius integration
Hi to all,
I'm trying to use the Xcelsius reporting capabilities in order to create some nice dashboards/reports using the SSM data.
I'm following this steps:
1 - Start Web Services Administration in NetWeaver
2 - In the Search By drop-down list, select Service Definition Name and click Go
3 - From the list of services, select jee-default_SMDataService
4 - Click the WSDL tab.
5 - Click the WSDL link http://<nwce server>:<port>/strategy/SMDataServiceService?wsdl&mode=sap_wsdl in the Details about WSDL section.
And my problem is in this last step, I dont have that link, only the:
http://<nwce server>:<port>/strategy/SMDataServiceService?wsdl&mode=ws_policy
Did anyone did this configuration already? What is the reason for the sap_wsdl link is not appearing?
I'm using SSM7.5 SP3 and Netweaver CE 7_1
Thanks in advance for all the help.
Pedro
Hi Bob,
thanks for your answer.
I just double check, and Strategy Management is working fine, but even so, I don't have the sap_wsdl link in my NetWeaver!?!?
Please see the following image:
[http://img227.imageshack.us/img227/6412/sapwsdl.jpg]
In the "Details about WSDL" section, I should have another line with the link to the sap_wsdl, but for some reason that is missing.
Regards
Pedro
Similar Messages
-
Cisco CSC SSM to Active directory integration issue
Hi,
I have configured ASA CSC SSM module for AD integration for user based access control. The domain controller Agent has been installed in AD server. But the Agent is not able to communicate to CSC module. There are errors getting generated in AD and CSC.
There are no network layer issues between AD server and CSC. All the frewalls have been turned off. I suspect some configuration changes to be done on AD or with the Agent installation file. I have followed the configuration steps recommended by Cisco in configuring AD server and CSC module. I have attached the Log files.
Please suggest solution for this issue. Thank you.
With Regards,
Madhan kumar G.Hi,
Below are the suggestions from TAC engineer, which rectified issue in my case. Hope this helps your scenario.
Ø Verify the following
Ø 1. The client machines should be part of the windows domain
Ø
Ø 2. File Sharing should be enabled on the client machine
Ø
Ø 3."Remote Registry" Service should be enabled
Ø
Ø 4. On the windows firewall, select "Windows Management Instrumentation
Ø
Ø (WMI)" as exception program to allow in bound WMI calls.
Ø
Ø Also, make sure the "File and Printer Sharing" is part of the exception list.
Ø
Ø 5. The client is able to ping the Agent and the Domain Controllers. -
Hi All,
I want to know whether BPC 7.0 version supports integration with Xcelsius if it is then how it is doner else 7.5 version only supports full integration.
Thanks,
Raghu.Hi,
For 7.0 we have an integration with XCelsius but of course we have also some limitation.
You can use the follow HTG from follow link http://wiki.sdn.sap.com/wiki/display/BPX/EnterprisePerformanceManagement%28EPM%29How-to+Guides.
This can help you to use XCelsius with SAP BPC 7.0.
Taking in consideration that 7.5 is able to use CMS authentication from BO we can say in 7.5 we have fully integration of SAP BPC 7.5 with Xcelsius and not only with Xcelisus. We ca say we have a fully integration with almost all BO interface like Voyager, Webi.
We prepared an RKT material which will be distributed very soon providing details about integration with BO interface.
I hope this will help you.
Regards
Sorin Radulescu
Edited by: Sorin Radulescu on Nov 25, 2009 9:27 AM -
Xcelsius integration in Web Dynpro ABAP
Hi experts,
I am trying to develop a chip page with Xcelsius; but, when I try to put my Xcelsius, not appear nothin.
I do some test, and I check:
Problem with the file GenericXcelsiusIsland_2008_30.swf; I can not find it, but I download the file GenericXcelsiusIsland_2008.swf (in the WebDynpro /BCV/WDC_UIF_DISPLAY_XC), I rename it and I upload it. Now, appear an error with the file xlf; I upload too. Now, not appear errors, but it does not show the flash.
Any idea?
Thanks in advance,
Regards.Hi Victor,
I have the same issue. Did you manage to find a solution for this ?
Br,
Sergiu -
Xcelsius Integration with BPC MS version - Error
Hi
I am trying to integrate xcelsius tool with BPC MS version.i am getting below error when I try to check the configuration..can anyone help on this?
**Server Error in '/OSoft' Application.**
**Parser Error**
**Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.**
**Parser Error Message: Could not create type 'XcelsiusService.QueryResults'.**
**Source Error:**
**Line 1: <%@ WebService Language="c#" Codebehind="QueryResults.asmx.cs" Class="XcelsiusService.QueryResults" %>**
**Source File: C:\BPC\Websrvr\Web\App\XcelsiusService\QueryResults.asmx Line: 1**The SAP BusinessObjects EPM Connector add-on file is included in the SAP BusinessObjects
Extended Analytics Analyzer Support Package setup. The setup installs Extended Analytics
Analyzer and copies the EPMConnector.xlx file in the EPMConnector sub-folder of the Extended
Analytics Analyzer installation folder.
You can find the software here:
http://service.sap.com/swdc
Installations and Upgrades - Entry by Application Group --> SAP BusinessObjects Portfolio --> SBOP Extended Analytics -- > BOBJ Extended Analytics 7.5 --> Installation
You can find the user guide here -- note that it is confusingingly found under Financial Consolidation
http://service.sap.com/instguides
SAP Business Objects --> EPM --> Financial Consolidation --> 7.5 --> SAP BO EPM Connector User Guide 7.5
http://service.sap.com/~sapdownload/011000358700001297252009E/EPMConnector75_en.pdf
More information can be found in the BPC 7.5 NW Master Guide
http://service.sap.com/~sapdownload/011000358700001106942009E/SBOP_PC_75_NW_SP03_Master.pdf
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG) -
Xcelsius integration with BPC - MS Versions - Error
Hi
I am trying to integrate xcelsius tool with BPC MS version.i am getting below error when i test teh webservice....
can anyone help on this?
Server Error in '/OSoft' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not create type 'XcelsiusService.QueryResults'.
Source Error:
Line 1: <%@ WebService Language="c#" Codebehind="QueryResults.asmx.cs" Class="XcelsiusService.QueryResults" %>
Source File: C:\BPC\Websrvr\Web\App\XcelsiusService\QueryResults.asmx Line: 1The SAP BusinessObjects EPM Connector add-on file is included in the SAP BusinessObjects
Extended Analytics Analyzer Support Package setup. The setup installs Extended Analytics
Analyzer and copies the EPMConnector.xlx file in the EPMConnector sub-folder of the Extended
Analytics Analyzer installation folder.
You can find the software here:
http://service.sap.com/swdc
Installations and Upgrades - Entry by Application Group --> SAP BusinessObjects Portfolio --> SBOP Extended Analytics -- > BOBJ Extended Analytics 7.5 --> Installation
You can find the user guide here -- note that it is confusingingly found under Financial Consolidation
http://service.sap.com/instguides
SAP Business Objects --> EPM --> Financial Consolidation --> 7.5 --> SAP BO EPM Connector User Guide 7.5
http://service.sap.com/~sapdownload/011000358700001297252009E/EPMConnector75_en.pdf
More information can be found in the BPC 7.5 NW Master Guide
http://service.sap.com/~sapdownload/011000358700001106942009E/SBOP_PC_75_NW_SP03_Master.pdf
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG) -
Polestar & Xcelsius integration
Hi all,
I am a newbie on SAP Business Objects but I wanto to know if is there a way to integrate an Xcelsius Report into Polestar?
Maybe using some API or configuration. We would like to integrate the adaptability of Polestar with the usefull UI elements of Xcelsius.
Any idea or doucmentation would be appreciated.
Regards,
Orlando CovaultOrlando,
As Thomas Marion said on previous post customization of Explorer interface is not possible. One way, is you create an hiperlink from your Xcelsius Dashboard to the Explorer address.
Regards
Rodrigo. -
Xcelsius integration in WebDynpro Java Flash Islands
Hi,
We developed a visual composer application with CE 7.20 SPS 03 and we try to integrate a xcelsius gauge in to VC 7.20. It works fine with passing single or multiple parameters to xcelsius with webdynpro java flash islands, but how do we get the value from xcelsius back to webdynpro java.
How do we have to name the event in webdynpro flash island? Which event is triggered when change a slider or a gauge? Is there any document?
I need your help.
Best regards,
Murat Y.Creating Flash Island Events
To implement the Visual Composer application if data has changed on the Flash island side, we need to define a Flash Island event. In this example, the Web Dynpro application needs to be updated once the user has changed one of the two slider values. The Web Dynpro application will trigger an event that will be handled in Visual Composer. Once you have created a Flash island event entry, you can assign a Web Dynpro action method to be called if the Flash island event is raised.
1. Right-click RootElement again and create a SliderCostsEvent and a SliderRevenuesEvent:
2. Assign the following attribute values to the Flash island event entries:
SliderCostsEvent:
SliderRevenuesEvent:
Note:
The Flash island event name must be the same as the name in the corresponding Data Connection Range and Property. For example, in the Xcelsius Data Connection, we defined a Range u201CSliderRevenuesu201D. Once the referring value is changed, the Flash island event SliderRevenues is called (which is bound to a Web Dynpro action method) and also the data is written to the SliderRevenues Flash island property (which is bound to a Web Dynpro context attribute). Once an Action method is called from the Flash island event, the data is transferred to the Web Dynpro context.
The onAction property points to a method Update(), which you need to create in the FlashIslandView (see implementation following).
3. Now we will create the event that will refresh the data in the Visual Composer application. Go to the Events tab of the Component Controller and click New. Enter RefreshData as the event name and click Finish.
4. Create the Component Controller method that will be called by the viewu2019s Update method. Go to the Component Controlleru2019s Methods tab and create a new method by clicking New. In the dialog box, select Method and click Next. Enter the name of the method, i.e. updateData and click Finish. Save the application.
5. Right-click on this method and select Navigate To Implementation. This will open the implementation code of this method.
The method should look like this:
public void updateData( ) {
//@@begin updateData()
wdThis.wdFireEventRefreshData();
//@@end
The Update method of the FlashIslandView calls the Update method of the Component Controller; see implementation below:
public void onActionUpdate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionUpdate(ServerEvent)
wdThis.wdGetCostRevenueCompController().updateData();
//@@end
The Update method of the Component Controller will trigger the event that will refresh the Visual Composer UI with the new data. The reason for the multiple calls is that actions that are defined in the view cannot fire events but they can call a method, so we need to call a Component Controller method that will fire the event.
6. Next, you should expose this event in the Interface Controller. Right-click the event and select Copy. Go to the Interface Controller, select the Events tab and paste the event. -
I have read all other cases that relate to this error and cannot get this to work. Running SQL Server 2012 sp1 on Windows server 2012 R2. Disk space and permissions are fine, but I get the error below when I try and use the check database integrity task
within my maintenance plan on both system and user databases. I have researched this and fragmentation is not the issue. I'm lost at this point and would appreciate at least some steps to try. databases are not "read only" as I have read this may
contribute to the problem. All other maintenance tasks run fine.
Error message from SQL LOG
Check Database integrity on Local server connection
Databases: All system databases
Task start: 2014-01-13T11:00:04.
Task end: 2014-01-13T11:00:04.
Failed:(-1073548784) Executing the query "DBCC CHECKDB(N'master', NOINDEX)
" failed with the following error: "A database snapshot cannot be created because it failed to start.
A database snapshot cannot be created because it failed to start.
MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand the physical file 'E:\\SQLdata\\MSSQL11.MSSQLSERVER\\MSSQL\\DATA\\master.mdf:MSSQL_DBCC9'.
The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline.
The database could not be exclusively locked to perform the operation.
Check statement aborted. The database could not be checked as a database snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous
errors for more details.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Error Message from Log File Viewer in SSMS:
Source: Check Database Integrity Task Executing query "USE [ReportServer] ".: 50% complete End Progress Error: 2014-01-13 11:31:54.92 Code: 0xC002F210
Source: Check Database Integrity Task Execute SQL Task Description: Executing the query "DBCC CHECKDB(N'ReportServer') WITH NO_INFOMSGS " failed with the following error: "A database snapshot cannot be created
because it failed to start. A database snapshot cannot be created because it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to
expand the physical file 'E:\SQLdata\MSSQL11.MSSQLSERVER\MSSQL\DATA\ReportServer.mdf:MSSQL_DBCC9'. The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not
support sparse files or alternate streams. Attempting to get exclusive access to run checks offline. The database could not be exclusively locked to perform the operation. Check statement aborted. The database could not be checked as a database
snapshot could not be created and the database or table could not be locked. See Books Online for details of when this behavior is expected and what workarounds exist. Also see previous errors for more details.". Possible failure reasons: Problems with
the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-01-13 11:31:54.93 Source: Check Database Integrity Task
Executing query "USE [ReportServerTempDB] ".: 50% complete End Progress Error: 2014-01-13 11:31:55.02 Code: 0xC002F210 Source: Check Database Integrity Task Execute SQL Task
Description: Executing the query "DBCC CHECKDB(N'ReportServerTempDB') WITH NO_INFOM..." failed with the following error: "A database snapshot cannot be created because it failed to start. A database snapshot cannot be created because
it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand the physical file 'E:\SQLdata\MSSQL11.MSSQLSERVER\MSSQL\DATA\ReportServerTempDB.mdf:MSSQL_DBCC9'.
The database snapshot for online checks could not be created. Either the reason is given in a previous error or one of the underlying volumes does not support sparse files or alternate streams. Attempting to get exclusive access to run checks offline.".
Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. End Error Progress: 2014-01-13 11:31:55.02 Source:
Check Database Integrity Task Executing query "USE [AddressUpload] ".: 50% complete End Progress Error: 2014-01-13 11:31:55.13 Code: 0xC002F210 Source:
Check Database Integrity Task Execute SQL Task Description: Executing the query "DBCC CHECKDB(N'AddressUpload') WITH NO_INFOMSGS " failed with the following error: "A database snapshot cannot be created because
it failed to start. A database snapshot cannot be created because it failed to start. MODIFY FILE encountered operating system error 665(The requested operation could not be completed due to a file system limitation) while attempting to expand
the physical file 'E:\SQLData\MSSQL11.MSSQLSERVER\MSSQL\DATA\database1.mdf:MSSQL_DBCC9'. The database snapshot for online checks could not be created. Either th... The package execution fa... The step failed.ReFS is NOT supported in use with SQL Server 2012. Once such item, which you've stumbled upon is the fact that alternate streams and sparse files are not implemented in ReFS and thus these issues are caused. You *could* force the checkdb to execute by using
WITH TABLOCKX but that'll require exclusive access to the database for the duration of the checkdb scan and that's not something I would advise to do.
Sean Gallardy | Blog |
Twitter -
Xcelsius Portal Integration kit for Sharepoint not showing in the gallary
Hi Experts,
I am testing the Xcelsius in my organization. After creating a dashboard , I am trying to integrate it in my Sharepoint portal.
For that I installed SP webpart container in the server. During installation it was not showing any wizard to me for selecting the options. After installation , i am trying to configure it in the webpart galary but ! couln't find the Xcelsius Webpart container in that list.
What to do to show it ? Could anyone guide me ?
Regards,
Jyothii'm not sure how it works with Sharepoint... however, i can tell you how we use the portal integration kit within WebSphere Portal.
first, the PIK itself is only used for BO integration, not Xcelsius integration (unless you are doing SSO in which case the BO login module is required).
the Xcelsius integration comes from creating the web parts on the client. For example, for WebSphere there is a tool that is loaded onto the client machine called "XcelsiusPortletCreationUtility". the purpose of this utility is to take a swf file and wrap it in a war file that can be deployed to the portal. i would assume that Sharepoint works in a similar way with a client utility.
also, within the Xcelsius file you must create a portal data connection, even if it's not actually used.
please look through your Xcelsius documentation or try to find the specific document that explains Sharepoint integration. -
Integrating Xcelsius into a website
Hello!
I am planing to have a website built which requires many types of charts to illustrate results. Does someone know if I can have the functionality of Xcelsius dashboards generating these interactive charts? Is there a special version of Xcelsius to do this? If so, cost?
Thanks for any info.Thank you for your reply Stewart.
I think i did a bad job explaining what I need.
Imagine a website where you enter the name of a city, and the internal code of the website looks for all the economic information about said city, automatically generating Xcelsius interactive dashboards. In other word, what i am looking for is to have Xcelsius integrated into the website so it will generate dashboards automatically. is this possible?
Thanks -
SSM calling Xcelsius and BO Reports combine datas and Universes into SSM
I would like to connect within SAP SSM reports and Xcelsius passing parameters to dashaboards of Xcelsius (with BO universes or not) and merge information from PAS Cube and data from other universes BO.
Could someone help me
Best Regards
Carlos MardinottoCarlos,
There are two different processes you use to get information into Xcelsius and into Universes. For Xcelsius you are using web services, since you are bringing in not only the data but the objective names, etc. to create the dashboards.
For getting PAS data into Universes you create an ODBO connection to Voyager and from Voyager you create a Universe.
In the Configuration Help guide for Strategy Management available from Service Marketplace (Installation & Upgrade Guides), Section 9.6 gives information on providing Strategy Management data for Xcelsius and Section 9.7 has instructions on providing Strategy Management Data for Voyager.
Regards,
Bob -
Information about SAP Strategy Management (SAP SSM )
Can someone tell me where I can find the modul "SAP Strategy Management 2007" or where I can order it? Is it a standalone solution or is it part of a package, maybe of the CPM? I couldn't find it in the catalog.
Thank you in advance...
RobRob,
As Jean pointed out SAP Strategy Management (SSM) 7.0 has just been released for Ramp-Up.
SSM 7.0 is integrated tightly to Netweaver. This can be a stand-alone product, and it is also designed to work in the larger Financial Performance Management suite, that would include BPC (Budgeting, Planning, & Consolidation) and PCM (Profitability and Cost Management).
I was not sure what you meant by ordering the SSM product. You can contact your account executive if by ordering you meant purchasing.
Since the product just entered Ramp-Up, even partners or consultants would have to be part of the Ramp-Up process to gain access to SSM 7.0.
With integration to Netweaver, I strongly suggest that you consider SSM 7.0 if you are looking for strategy management.
Thanks for your interest!
Bob -
BPC BO integration roadmap?
Hi,
I would like to know what are the options/roadmap for integration of BPC 7 N/W ver. with BO tools? I have already seen the Xcelsius integration with BPC ,but what about other BO tools like Universe designer ? Or do we have to rely on sap integration kit to bring in data from backend-bw cubes of BPC into BO?
Regards,
RinalSorry we can't comment or publish roadmap details here on this forum. Please have a look at the [EPM Statement of Direction|http://download.sap.com/download.epd?context=28C50F34DBC5B1739D53D0C969B0D364E06E399FA7A818D08B48EF091E468B491FB5D07984032689F051993248C4C11172D88EA07CBE2EAA] document available from SAP.COM.
If you are reading this and you are an SAP customer you have the opportunity to participate in the Customer Value Network meetings which are coordinated through the SAP user groups where you will be privileged to learn about roadmap details more thoroughly.
If you are an SAP partner reading this post I encourage you to explore the tools which are available to you at the [SAP Ecosystem for Partners|http://www.sap.com/ecosystem/partners/index.epx].
Best regards,
[Jeffrey Holdeman|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/jeffrey+holdeman]
SAP BusinessObjects
Enterprise Performance Management
Regional Implementation Group -
Hello,
I have a requirement - where I want to link Sensor data to xCelsius Dashboard and pass time based single instance of the value to SAP.
I would like to see whether Bi-directional communication possible with xCelsius ?
I want to use it for Decision Supporting for controlling operational functions.
What are the challenges. Any guidance available ?
Thanks in advance
Jayakumar
Edited by: Jayakumar Indracanti on Sep 24, 2009 6:36 PMHello,
While googling I found the following link - Hope it will be of some use.
http://www.sapteched.com/emea/edu_sessions/session.htm?id=45
I was seeing for the same solution (SAP EHS Emission Management and xCelsius Integration for GHG Decision Support)
Thanks for your answer
Thanks
Jayakumar
Maybe you are looking for
-
FC valuation for open items and GL items
In Foreing currcy valuation why we required to reverse the trasactions on the next month beginning or is it optional ? my understanding is these valuation are for open items , so items may be open for more than one period, so every month we will rea
-
:I went to Mozilla's website and downloaded the Firefox Optimized for Yahoo, following the directions. The download installed easily, but when it opened my Yahoo web page (I already had an account with them), the Java Script error message "Uninstall
-
How do I add a box which is not effected by the grid system
Hello all, I am trying to make a Navbar at the top of my page which spans the width of the webpage and is at the top of the screen how ever I would like buttons and logo's to be effected by the responsive design like the picture I have attached
-
Can I use any mobile phone to connect to website via BLUETOOTH?
I doubt some phones not compatible with MAC OS.
-
Can not move whole album to playlist
when i try to move a whole album to a playlist with the album highlited and drop it on playlist then go to burn a cd i only get the song that was listed under the album line that i moved how do i get whole album i'm following proper drop and drag out