SSM Cause and Effect diagram

Hi
I have question about Cause and Effect diagram setup in SSM10.
Is it possible to set up cause and effect relationships only between objectives in "objectives" level?
I added two more levels to Scorecard and I can setup C&E diagram only to second scorecard hirerarhy level (Objective).
For example:
Level 1 -  Perspective
  Level 2 - Objective <<<<< C&E digaram only covers this level?
    Level 3 - Custom Objective level
      Level 4 - Custom Objective level
        Level 5 - KPI
Am I understanding correctly?
Toomas

Toomas,
You are correct. No matter how many levels you create for your hierarchy, cause and effect will only work with Objectives.
Regards,
Bob

Similar Messages

  • Cause and effect map, zoom = "fit to page" - default option

    when opening cause and effect map, the default zoom option is : zoom = 100%.
    how can I change the default to be : zoom = fit to page ?

    Sorry no workaround as yet...
    I too am now sick of the amount of expensive paper I have wasted due to the Preview app default print setting of 'Scale to fit'.
    - No option to print at 100%, you have to manually input this information.
    - No way to change this default in preferences, you can change the opening viewing size of a doc to 100% though.
    - Doesn't remember the previous settings if you decide to reopen the doc and print another copy.
    I also found that if I attempted to print an A4 doc with bleed and crop marks, it would set the default paper size to A4 and the annoying scale to fit would be set to 83%. If I then changed the scale by typing in 100% but don't hit enter for fear of the print starting and then simply use the drop down to change the paper to A3 and then change the orientation and then hit enter it ignores that you have changed the scale and prints your doc at 83% on A3 - Brilliant!
    It's a shame to say that I will be going back to acrobat for pdfs!
    If you can't put a 100% scale radio button on the print dialogue box either allow people to change the default in prefs or even better allow the presets to control paper size and scale of printing!

  • Cause and effect in iPhoto

    What would cause my photo library of several thousand images to suddenly go blank and become an unrecognizable format? When I highlight a blank "place-saver", the information block says it is a JPEG Image. I have several other libraries which have not gone blank. when I open them and highlight an image, the information block says it is a JPEG Image also. What would make the blank images produce a message that says "unrecognizable format" when in fact it is the same as images which did not go blank (JPEG image)? Please help me. I need the images.
    Thanks

    If when I put the curser to anyone of the dotted squares it identifies the photo by number, by date, by time, by format and by size, how does that happen if the images are not anywhere?
    iPhoto is a database. What you're seeing there are the entries in the iPhoto database that correspond to the photos.
    WHy do you assume that these drives are backing up your photos? Just plugging the the disks won't make a back up. Something is copying the Library to these disks.
    File Recovery software - such as File Salvage- will scan the disks for recoverable files. Actual recovery requires a purchase.
    Regards
    TD

  • Cause and Effect Apps that are Blue Tooth Switch Compatible

    I teach kids with mulitple disabilities and I am looking for apps that are as simple as pressing a blue tooth switch and a picture pops up or a song plays. Does anyone know of any or have recomendations? It would be so appreciated!

    I have this same question Jadrb?  Did you find a solution?

  • Can too large a folder cause issues and effect performace of my Mac Pro

    Hi, I have a 180 gb folder filled with important data within my Home folder. This folder has a many subfolders as well. The folder is on my startup drive and where I have Snow Leopard installed. Can too large a folder cause issues with my mac and effect performance? Thanks

    another way to ask, would you make better use of, and improve I/O and performance, if you used your other drive bays? yes.
    Boot drives with even less than 50% free is probably not a good idea. All depends on whether 200GB is on 1TB or on 500GB drive. And how fragmented free space even.
    Lifting, loading and writing or copying 4GB files of course does have an impact, so if you work with 2GB files in CS5....
    Having a dedicated type boot drive, media drive (and isolate media and library files) as well as scratch drive is normally done with Mac Pro.
    The biggest bang in performance: lean mean SSD boot drive.

  • Trash will not delete from trash folder! What can cause this effect?

    Trash will not delete from trash folder! What can cause this effect?

    u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
    try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
    as chamar suggested look at http://www.thexlab.com/faqs/trash.html
    i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
    best of luck

  • Styles and Effects Effects

    In the Styles and Effects palette, under Layer Effects, we seem to have lost
    the WOW NEON styles.
    Short of a reinstall, does anyone have any suggestions how to get these Wow
    Neon effects back?
    Dave

    I am going to hijack Beth Haney's answer to another question as she explained it so well, but I do want to credit her.
    You don't say what platform you're using, so I'll give the instructions for both.
    With Elements closed, click on the start up icon then make a QUICK grab for (Windows) Control, Alt, and Shift keys or (Mac) Command, Option, and Shift keys. Hold all three down until you get a screen asking if you want to delete Settings. Say Yes. If you don't get that screen, you didn't get the keys depressed fast enough, so keep trying. A new Preference folder will build as Elements continues to launch.
    Since this is "new" behavior for an installation that's been working properly for a long time, it's possible that folder became corrupted. That's pretty common and can cause all kinds of mysterious things to happen. If this doesn't correct the problem, repost and add information about the kind of system you're using.

  • How does the crop-lock and "Effect" settings logic work?

    The crop lock and Effect setting have in common the fact that they are unpredictable with a strange logic I have yet to figure out. Questions:
    What decision process causes the crop lock to remain locked, and then suddenly decide to stay open from one use to the next  (Or the reverse).?
    What makes the "Effects" decide to retain its last used settings, and sometimes not?  (Usually the last customized setting is NOT what I want for the next photo in line to be edited).
    Thanks!

    Thank you for the reply!
    richardplondon wrote:
    There is no distinction betwen edited and un-edited. And the tools and controls do not have any defaults of their own aside from what the images possess. You can't put the crop tool on 3:2 and then move from image to image clicking "apply"; this is simply not how the LR interface works.
    Understood, except that these settings are an exception.  The effects settings will be stuck in the last positions they where on before you created the edit button.  See attached photo for what I mean by edit buttons and associated settings.  This also applies to graduated filters.
    This is difficult to describe.   I think I've figured out the logic but cant understand why anyone would want it to work this way:   If I choose a setting *before* making the first mark (i.e. new button) with the tool, those settings will persist forever until I change them (even if I change catalogs).  If I change the settings AFTER applying the tool, they are forgotten even if I want to keep them.  I never want a custom setting to persist into the next photo because the last tool/setting I used will not likely be the first tool used in the next photo.
    And just to be clear, the effects I'm referring to are on the right. The timing of WHEN you adjust those settings determines whether or not they persist in what I consider an undesirable way.  In other words, in order to avoid messing up the presets, I must always start the tool before adjusting the effects. That is the only way to keep them from persisting into the next tool/button operation.

  • Multiple tracks and effects not bouncing to mp3???

    Hello,
    This might be a tough problem to diagnose due to the many possibilities as to what might be causing this...
    I have multiple tracks and effects missing on a project [32 tracks] after bouncing to mp3. This has never happened to me before and I've been running Logic consistently for about a year now. I've tried bouncing the same project about five times now and there doesn't seem to be any consistency with regards to which tracks and effects go missing.
    I do not have any of the tracks or effects that are missing after bouncing muted and nothing in the project is soloed. No problems with automation prior to bouncing either.
    Please help.
    Thanks.

    cauchy wrote:
    Just tried it and got the infamous "System Overload"!!
    Any suggestions to get around this? I already froze my tracks. Btw, only working with 4 GB's of RAM...could that be the problem?
    Thanks.
    Which is why you're missing tracks... too many plugins, are you using Reverbs and Delays on a bus where possible? RAM could be a problem but the fact is you're over-taxing your system. It could be virtual instruments, it could be not being able to pull data off a drive fast enough... it could be using too many Reverbs as inserts when using one on a bus for several tracks would be more economical.
    Try giving your system more time to work.
    Increase the I/O Buffer to 512 or 1024...... try the Process Buffer at Large

  • Replacing material while keeping old cuts and effects

    I went through the entire process of capturing, editing, and authoring video with Premiere Pro CS4 only to realize that the first half of my hour-long project was captured with the wrong aspect ratio. The aspect ratio of the footage is 16:9, whereas the capture settings were set for 4:3. The discrepancy causes flickering and other unwanted effects to the video, but I'm not compelled to redo the entire business with all the cuts and effects that I so carefully worked on. Is there a way to recapture the footage off the DV tape, this time with the correct aspect ratio, and to import it to the project so that it would replace the respective, pre-existing while keeping all the editing decisions of the old footage intact?
    Thanks a million for any help!

    Just make a new sequence with the right aspect ratio.
    Copy old timeline into new one.

  • I have both TimeCapsule and Airport, and run two mac computers in the house on the one network. The airport often can not be found, and the signal is incredibly weak unless in the same room as the modem. Previously our signal was strong and effective.

    The signal has been strong and effective previously and as far as i'm aware that nothing else in the house has changed. We have two apple computers, appletv, an ipad, 2 iphones, time capsule, and airport all running off the same network. If there is product, a configuration or program we can get to help diagnose and or solve any connectivity issue that would be awesome

    The  Powerline adapters mentioned by edex67 are your only hope if you cannot run an Ethernet cable.
    Even if the home and office are on the same electrical circuit, you won't really know how well the Powerline adapters might work until you actually try them out at your location.
    For that reason, it would be a good idea to understand the store's return policy before you buy.

  • Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!  SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

    The issue:  Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! 
    SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
    The cause:  It is now clear what caused this problem.  For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.).  In May 2012 I decided to make some of them one hour  events so I could add alerts to remind me of the event.  I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
    The symptom:  Syncing stopped working for the calendar but continued working for contacts and notes.  I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious. 
    The failed attempts:  I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance.  From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012.  Events before May were in both Outlook and the iPhone but events after May were only one or the other.  Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious.  MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things.  We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
    The fix:  After 18 months of frustration, MANY  hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync  problem and it indicated all day events were related.  I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events,  sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
    After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync.  It synced for the first time in 18 months! 
    Problem occurred May 2012 – fixed Nov 2013

    Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
    It will recursively remove all '_ModGrp...' folders
    Sub RemoveFolders_Click()
        Dim oOutlook As Outlook.Application
        Set oOutlook = New Outlook.Application
        Set objNameSpace = oOutlook.GetNamespace("MAPI")
        Call CleanFolders(objNameSpace.Folders)
    End Sub
    Sub CleanFolders(objFolders As Outlook.Folders)
        For i = objFolders.Count To 1 Step -1
            If Left(objFolders(i).Name, 7) = "_ModGrp" Then
                objFolders.Remove( i )
            Else
                If Not objFolders(i).Folders Is Nothing Then
                    Call CleanFolders(objFolders(i).Folders)
                End If
            End If
        Next i
    End Sub

  • What are the cause and fix for the following error message? NS_ERROR_FILE_ACCESS_DENIED failure code: 0x80520015

    Every time I close my Firefox browser I receive the following error message (see details below).
    FYI:
    -- I am running the current version of Firefox.
    -- I had no problems with this error message until my computer was recently attacked by 2 viruses:
    ` SystemFix
    ` Win7 Antivirus 2012
    Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
    Here are my questions:
    * What are the cause and fix for this problem?
    * Do I need to uninstall and reinstall Firefox?
    * Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
    I look forward to any feedback and support you might be able to provide.
    Thanks,
    Metta
    Error Message
    NS_ERROR_FILE_ACCESS_DENIED
    Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
    [nsIFileOutputStream.init]
    File: undefined
    Line: 857
    Stack: undefined

    Every time I close my Firefox browser I receive the following error message (see details below).
    FYI:
    -- I am running the current version of Firefox.
    -- I had no problems with this error message until my computer was recently attacked by 2 viruses:
    ` SystemFix
    ` Win7 Antivirus 2012
    Both viruses have since been cleaned from my computer. However, I am still receiving this error message.
    Here are my questions:
    * What are the cause and fix for this problem?
    * Do I need to uninstall and reinstall Firefox?
    * Is it possible that this error message is related to an add-on and that it has nothing to do with the recent virus attacks?
    I look forward to any feedback and support you might be able to provide.
    Thanks,
    Metta
    Error Message
    NS_ERROR_FILE_ACCESS_DENIED
    Component returned failure code: 0x80520015 (NS_ERROR_FILE_ACCESS_DENIED)
    [nsIFileOutputStream.init]
    File: undefined
    Line: 857
    Stack: undefined

  • Use Color or Magic Bullet Looks for complete grade and effects?

    I am a long time MB Looks user - not heavy dosages but I do find it easy and fast as it keeps you inside FCP and along with the 3-Way CC it was efficient.
    I am nearing an edit on a 80 minute documentary which involves going from color to clips converted to black & white and sepia tone for effect. I am thinking to use Color workflow for the entire color grade and effects.
    Does Color dispense the need for Looks altogether? I have used color a few times now but not on a complete feature length, so I would need to sharpen my knowledge.

    Jon Braeley wrote:
    Does Color dispense the need for Looks altogether? I have used color a few times now but not on a complete feature length, so I would need to sharpen my knowledge.
    Color, MB Looks, FCP's 3WCC are all arrows in our quiver. We don't need to give one up to use another.
    I'm working on a doc now (it's rendering out in Color as I type this) that has "Hero" shots being treated in MB Looks. But I use Color to even out all those Hero shots so the MBL settings I'm using will be applied consistently. But even then I find it useful to to precede MBL with a 3WCC so I can easily adjust the tonality, saturation, and color palette of the shot without having to step back into the MBL interface.
    I can definitely guarantee that I couldn't have graded this show in 2.5 days if I just kept myself to using only the FCP interface. Even with the prep time for the Color round-trip - I get better results faster...
    - pi

  • What is causing, and how do you fix, a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1

    What is causing and how do you fix a song stopping during playback? I have latest iTunes 12.0.1 and Yosemite 10.10.1.
    It stops then after several seconds (like 25 secs) then it starts again ... and then several seconds later it stops again!
    I have the latest software so I don't know what to do?
        David V.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

Maybe you are looking for