SSM ODBO Connection - for Solaris

I am working at a site that has Business Objects 3.1 running on Solaris. Has anyone been able to configure the ODBO connection to work on a similar environment? The documentation states the prerequisites are Business Objects 4.0 on a windows server.

It is a management decision, at the moment patching for Solaris 9 and older is free while for Solaris 10 with Sun Update Connection the customer must have a service contract to be able to download all patches and management does currently not want to change that..

Similar Messages

Rwdevid for solaris 9 (sparc) / changing hd id

Hi,
I'm searching for rwdevid. Is there a public link availabe or is the tool only available for customers with gold support?
We need the tool because we have hd's with no id so we want to set one. Or is there another solution/tool to do that?
Thanx
Marc

This forum is for issues with Sun Update Connection for Solaris 10 only.
We would recommend that you post your problem in the Solaris 9 Discussion forum and someone in there should be able to help you out. I've included a link to that forum below -
http://forum.sun.com/forum.jspa?forumID=151

TCP connection for DHCP failover frequently are broken in Solaris 10

Hi
We have two dhcp servers which are installed in Solaris 10 and set to a failover pair. Currently, we can find that tcp connection for dhcp failover protocol are frequently broken. It looks like that primary dhcp server initiatively send FIN message to secondary one but in general, this tcp connection should always keep alive. On the other hand, the tcp connection can not completely be closed right now which FIN_WAIT_2 status in Primary one and CLOSE_WAIT status in secondary would last for a long time.
Will Solaris 10 cause this fault? Is it a known bug in OS?
OS info:
-bash-3.00$ cat /etc/release
Solaris 10 5/08 s10s_u5wos_10 SPARC
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
-bash-3.00$
-bash-3.00$
-bash-3.00$ uname -a
SunOS edns1 5.10 Generic_142900-03 sun4v sparc SUNW,Netra-T5220
TCP connection info:
Primary DHCP Server:
2012 08 29 03:41:43
PING 172.25.6.137: 56 data bytes 64 bytes from edns2 (172.25.6.137): icmp_seq=0. time=0.678 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u   45 1024 377     0.75   -0.071    0.05
+idns2           195.26.151.151   3 u 162 1024 377     0.93    0.169    0.08
clusternode1-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
+clusternode2-pr idns1            4 u 406 1024 376     0.49   -0.154   15.12
172.25.6.133.647 172.25.6.137.58107 49640 0 49640 0 ESTABLISHED
172.25.6.133.647 *.* 0 0 49152 0 LISTEN
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2012 08 29 03:41:47
PING 172.25.6.137: 56 data bytes 64 bytes from edns2 (172.25.6.137): icmp_seq=0. time=0.535 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u   49 1024 377     0.75   -0.071    0.05
+idns2           195.26.151.151   3 u 166 1024 377     0.93    0.169    0.08
clusternode1-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
+clusternode2-pr idns1            4 u 410 1024 376     0.49   -0.154   15.12
172.25.6.133.647 172.25.6.137.58107 49640 0 49640 0 FIN_WAIT_2
172.25.6.133.647 *.* 0 0 49152 0 LISTEN
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Secondary DHCP Server:
2012 08 29 03:41:41
PING 172.25.6.133: 56 data bytes 64 bytes from edns1 (172.25.6.133): icmp_seq=0. time=1.26 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u 450 1024 377     0.92   -0.067    0.06
+idns2           195.26.151.151   3 u 552 1024 377     0.96    0.237    0.08
+clusternode1-pr idns1            4 u 360 1024 377     1.85   -0.528    1.51
clusternode2-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
172.25.6.137.647 *.* 0 0 49152 0 LISTEN
172.25.6.137.58107 172.25.6.133.647 49640 0 49640 0 ESTABLISHED
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2012 08 29 03:41:45
PING 172.25.6.133: 56 data bytes 64 bytes from edns1 (172.25.6.133): icmp_seq=0. time=1.36 ms
remote refid st t when poll reach delay offset disp
==============================================================================
*idns1           195.26.151.151   3 u 454 1024 377     0.92   -0.067    0.06
+idns2           195.26.151.151   3 u 556 1024 377     0.96    0.237    0.08
+clusternode1-pr idns1            4 u 364 1024 377     1.85   -0.528    1.51
clusternode2-pr 0.0.0.0 16 - - 1024 0 0.00 0.000 16000.0
172.25.6.137.647 *.* 0 0 49152 0 LISTEN
172.25.6.137.58107 172.25.6.133.647 49640 0 49640 0 CLOSE_WAIT
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thanks!

Thanks, but had found a previous discussion with this hint and applied it.
svccfg -s sendmail listprop shows config /local_only = false
Yes, I would really love to fix the fault, but what I would really like is some hints as to how to debug ports under svc control.

The deployment process seems to die or get stuck, iAS 6 SP3 for Solaris 8?

When I deploy my application in iAS 6 SP3 for Solaris 8 the deployment process seems to die or get stuck. In the shell window i get the messages
iasdeploy for iPlanet Application Server 6.0 SP3
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
sstu15:null
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
After this nothing happens for a really long time.
When starting the deployment I get in the beginning of kas.log two entries
ADMIN-168: kas> deployment get log ''J2EEInstallEar''
GDS-007: finished a registry load
but suddenly the second line disappears and the only message I get is the first entry. I need to break the deployment process and kill the processes manually.
When starting the application server I get two error messages:
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
iPlanet Administrative Server
Version 6.0 SP3, Build 20010704
Copyright (c) 1996-1997 KIVA Software Corporation.
Copyright (c) 1998-1999 Netscape Communications Corporation.
Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp
. All rights reserved.
Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
[14/Feb/2002 11:02:12:7] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
[14/Feb/2002 11:03:08:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
I think all processes starts OK, I get one for .kas and one for kas, one for .kxs and one for kxs and finally one for .kjs and one for kjs.
Is someone familiar with this/these problem(s)?

It seems you are deploying a very big application. Try to deploy this application with following command
j2eeappreg <filename>
It should work fine. It was a bug with iasdeploy command in iAS SP3 which had been fixed in iAS SP4.

Memory Leak in 8.1.6.0.1 JDBC/OCI for Solaris

Hello,
there is a memory leak in the 8.1.6.0.1 JDBC-OCI driver for solaris.
The leak causes your jvm to eat up all memory
if you reuse callable statements
(calling one statement multiple times with
different values).
The thin driver has no such problem. Is
there any fix available ?

Ok. The code spans multiple classes and
most of it comes from a customized version
of the Enhydra Java Application server.
I have a class called "StandardDBConnection"
which caches CallableStatements and is a
wrapperclass for java.sql.DBConnection. The
interesting method here is "prepareCall":
* Get a callable statement given an SQL string. If the statement is
* cached, return that statement, otherwise prepare and save in the
* cache.
* @param sql The SQL statement to be called.
* @return a new CallableStatement object containing the
* pre-compiled SQL statement.
* @exception java.sql.SQLException If a database access error occurs
* statement.
public synchronized CallableStatement prepareCall(String sql)
throws SQLException {
PreparedStatement preparedStmt;
logDebug ("Prepare call: " + sql);
validate();
preparedStmt = (PreparedStatement)preparedStmtCache.get(sql);
// Check if the object returned by the cache really is a
// callable statement. if it is not, someone did call first
// prepareStatement() and now prepareCall() with the same
// sql. Silently replace the existing cache entry by a
// callable statement in this case.
if (preparedStmt instanceof CallableStatement) {
preparedStmt.clearParameters();
else {
// Need to close the old PreparedStatement in case we have to
// replace it with a CallableStatement
if (preparedStmt != null) {
preparedStmt.close();
else if (preparedStmtCache.size() >= maxPreparedStmts) {
String key = (String)preparedStmtCache.keys().nextElement();
((PreparedStatement) preparedStmtCache.remove(key)).close();
preparedStmt = connection.prepareCall(sql);
preparedStmtCache.put(sql, preparedStmt);
return (CallableStatement)preparedStmt;
The statements get closed when I close the
connection:
boolean closeStmts = true;
// Close the prepared statements.
Enumeration e = preparedStmtCache.keys();
while (e.hasMoreElements() && closeStmts) {
String key = (String)e.nextElement();
try {
((PreparedStatement)
preparedStmtCache.remove(key)).close();
} catch (SQLException except) {
// Ignore errors, we maybe handling one.
closeStmts = false;
log.write(Logger.NOTICE,
"DBConnection[" + id + "]: " + url +
"\nUnable to close statements. Continuing....\n");
In my classes using database queries I just
use the prepareCall method of DBConnection
and do not have to care about anything.
Works perfectly with the thin driver, but
as soon as I switch to oci... :-|
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JDBC Dev Team:
Soda, Rupper,
Do you mind posting some code that shows us what your code was doing when you notice this leak?
Thanks.<HR></BLOCKQUOTE>
null

TCP IP connection From Solaris to Window?

Hello Friends,
I have SCM installed on Solaris OS,and SCM optimizer installed on WIndow OS.I need to Connect SCM Solaris to SCM window, Thought RFC type TCP/ip Connection.
For Example In Solaris SCM for TCP/IP-Program name is d:\apo\opt\ctm\bin\ctmsvr.exe and Host is Window SCM host name.
i need to know whether this Connection will work or If does not work Please Give the any Solution Friends.

Thank you all. I found an example in the internet http://documentation.softwareag.com/Crossvision/sap231/pages/drfc2rpc.htm. The situation force me to overpass my laziness and to use RFC
Yours sincerely,
Nguyen Hai Long

Setting up a bridge for solaris 10

Hi,
I currently have a dual boot for on my desktop (Solaris 10 and WinXP). I'm currently looking for a way to get online while in solaris, my WinXP install is on a wireless network but it's almost impossible to find wireless drivers for solaris so i'm trying to use my ethernet capabilities.
I bought a wireless print server which has a bridge feature and i'm hoping to find some information on how to setup a bridge on my solaris install.
Any help or direction will help me a lot since I'm very new to solaris. Thank you in advanced.

I have a similar issue but have not been able to get this solution to work.
I have an Airport Extreme 802.11n that is set up in bridge mode and connected to a DSL modem that assigns IP addresses.
I wish to use a remote Airport Express (late 2008) 802.11n to connect via ethernet to a PowerMac without wireless.
In summary I desire: DSL-ethernet-AirportExtreme-wireless-AirportExpress-ethernet-PowerMac
I have reset the Airport Express to factory defaults and then set to "Join wireless network" and checked allow Ethernet clients. The Airport Express gets an IP address but any number of Macs I have tried will not get an IP address in DHCP mode (except a self-assigned one). I have verified that the cable works: when I connect the Macs to the Airport Extreme base station, they all get an IP address. All versions of firmware are 7.4.1. I have also tried checking and unchecking "Allow this network to be extended" on the Airport Extreme.
Please help. Thanks

Quad gigaSwift Ethernet Driver for Solaris 10 Sparc

I have been looking about for this all over the place and cannot find it anywhere, in the manual and the sun site all the downloads are for solaris 9.
Are these cards not supported on Solaris 10 Sparc ?
Cheers,
Mike

it is the X4444A solaris 10 did pick up the card straight away, but the problem is there was no ce.conf file, i have created my own because i need to turn on jumbo frame for an individual port, but when i add it in all the ports on the card are being set to MTU 9800 so then i have to set them indivually to 1500 apart from the one i am using that needs to be 9000. This is all good and proper but when i activate this the box connects to the netapps server but all nfs shares fail as soon as anything touches these directories.
The netapps filer is running at MTU 9000 and the card is running at 9000 causes everything to fall over, set back to normal and everything is ok.
Any ideas ?

Oracle 9i for Solaris download

For the past few days I have been trying to download Oracle 9i database for Solaris. I am having two problems
1.) When I go to http://otn.oracle.com/software/content.html and select "9i Database", all I see is "<SCRIPT LANGUAGE="javascri".
2.) I am able to get to the Oracle 9i download page by connecting to http://otn.oracle.com/software/products/ (instead of http://otn.oracle.com/software/products/oracle9i/software_index.htm ) but once I get to the 9i for Solaris download page the links act like they have invalid URL's.
So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name
- Filename : 901solaris_disk*.cpio.gz
- Date/Time Mar 28 - 30 2002
- Browser + Version : IE 5.00.3315.1000
- O/S + Version : Windows 2000
- Error Msg : "Can not find server or DNS error

ramkumar swarnkar wrote:
Can anybody let me know link to download oracle 9i software for solaris OSThe normal places to check for downloads are at http://download.oracle.com and http://edelivery.oracle.com
If the software you look for is not at either of those places it is probably because they are outsiide 'normal' support status. In that case you need to contact either Oracle Support (if you have a valid CSI) or Oracle Sales (to get a CSI number) to get the software.

Kernel patch updation for solaris 10 x86

I have Solaris 10 06/06 installed on x86 machine which is using svm and clustered with another node. The kernel revision is 118855-19 from the uname -a output. I am looking for the kernel patch updation and I heard 118855-36 is the latest one. Shall I go ahead with this patch and what r the dependency patches for this.
If anyone done this please guide me..

Patch 118855-36 is the latest kernel patch for Solaris 10 on x86 and its dependencies are:
113000-01 117435-02 118344-14 119043-09 119255-14 121264-01 122035-01 123840-01 (or greater)
Whether you should go ahead and install the patch is up to you, if possible try it out on a test box first. For better advice on this matter, I would suggest posting in the Solaris 10 forum as this forum is for the Sun Update Connection, Patch Manager & PatchPro toolsets.

Need Agent Installer for Solaris (SPARC)

Hi All,
I have downloaded Grid Control Agent Installer for Solaris from http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html.
When I tried to extract the zip file, I am getting the following error message.
"Can not open file. It does not appear to be a valid archive. If you downloaded this file, try downloading the file again."
Even I tried using http://sac.us.oracle.com/download/index.html also but getting the same error.
Please send me the location if you have,
Thanks
Sumathi

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Reports 6I and Oracle 8i(8.1.6.0) for solaris

I have downloaded Reports 6i for solaris.
When I install it a ( Curses ) based GUI.
Comes on . After installing it. Oracle
stops working ? whats wrong ? it installs
its own NET8 driver which I believe is
causing the problem.
null

The Net8 Configuration Assistant allows you to add databases into a file called tnsnames.ora. Do not manually edit this file or you will not be able to une Net8 Configuration Assistant unless you delete tnsnames.ora.
it asks me if i want to use a directory service?? please advise me what this is for and should i use it
saying no is ok.
if i say no it then asks me to pick 81, or 8 i picked 8i
8i is the correct answer here
then it asks me to enter the service name?? i dont have a clue what it means
the service name (also know as SID in 8.0) is the name of your database.
then select protocol for database you want to access?? again i have no idea
The common protocol for Oracle is TCP/IP
then a host name??
the host name (is the name of your computer or another computer you want to connect to with an Oracle database running on it).
1. To find the name of your computer, click START>SETTINGS>CONTROL PANEL
2. Open the Network Icon
3. Select the Identification tab
4. The name of your computer is listed
Good Luck,
Michael

Oracle SOA Suite is also available for Solaris, HP-UX, IBM

Oracle SOA Suite is also available for Solaris, HP-UX, IBM
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html

Hi-
You can use below manual installation proceeds as follows :
Step 1. Download a setup for Windows and run it on a Windows machine.
Step 2. Once the setup is finished, FTP all the following files and folders from your Windows machine to you Sun Solaris server :
the entire 'bin' folder (excepting the '.bat' files) - ASCII transfer mode
the entire 'lib' folder - BINARY transfer mode
the entire 'drivers' folder - BINARY transfer mode
Step 3. Once you have transferred all the files, do not forget to configure the odiparams.sh file according to your environment. Also add the appropriate files, used by ODI to connect to your technologies, to the 'drivers' folder.
Does it helpful?
Thanks,
Saravanan Rajavel

OEM 12c for solaris (sparc) disk2 download failed

I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
Appriciate for your help.
http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
Archive: em12_solaris_sparc64_disk2of2.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
However, this error message is caused by an invalid / incomplete zip file.
I have also tried Oracle Edelivery site with same result.
TIA!

Patch Manager for Solaris 9 9/05

I am trying to locate the Patch Manager download for Solaris 9 9/05 but all I have been able to locate on the downloads site is the version for Solaris 8. Does anyone have a link to the Solaris 9 version? Thanks.

Exactly, whith that configuration all works well (if my server is connected to Internet).
The problem is when I have another server, not connected to Internet, that requires new patches.
If I have good understood I can install patch manager(2.0) on that server, require patches to my local patch server and if the patches required aren't on the disk the local patch server requires them to Sun. During this request it seems that my local patch server doesn't connect trough the proxy (snoop doesn't report connections). even if the configuration is set. (I have tried a reboot too).

SSM ODBO Connection - for Solaris

Similar Messages

Maybe you are looking for