SSM10 update fails with tuned signatures
Hi out there
I have a problem with a SSM10 module in a ASA5520 which has got the signature tuned - there is a lot of tuned signatures defined on it under active signatures - and this is split on three vs.
For some time the signature update has started failing - since 690.0 - I have been running a tac case on it and they told me to reset all tuned signatures to default settings. Well - after I did this I was able to update again - but now are my signatures in default settings. Since no-one can remember here why there where modified (and maybe a bit poor documentation on what had been done) I am not sure what impact the resetting has so of course I would prefer to restore the settings as they where before my update. But accourding to the tac engenieer I cannot backupå and restore the tuned values ? Can this be - what is that with that tuned values are not "supported" ??
best regards ti
There is no way to back to the custom values, because well...they were custom.
The unit is not going to keep trace of those changes, so that is lost forever.
The signatures on the unit can be tunned depending on the scenario and customer's requests, so if a signature is tunned or created, cisco can't really guarantee it will work as you want.
Cisco can do that with default-configured signatures.
Next time you do something that radical, create a backup of the config.
This applies for any device.
Similar Messages
-
Creative Cloud update fails with "the download appears to be corrupted" when tried through our company's firewall, but succeeds if the computer is taken outside the firewall. The IT guys have opened up the ports and URL's specified in the Adobe documentation. I have also captured the network traffic of both the failed and successful downloads for IT to examine (using Little Snitch), however they can find nothing to account for the problem. Adobe just seems to "give up and die" after about 2-3 minutes. Why is this? How can I or IT fix this?
Can I send the above log files to someone familiar with these issues for examination?Hi Gveo,
Please follow the article: Creative Cloud Help | About Creative Cloud Packager which will help you to get your issue fixed.
Thanks,
Ratandeep Arora -
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Acrobat 7 mandatory update failing with error 16820 and blocking the use of the program
Sorry I can't get the screen print to upload
It says
Mandatory Update Available
A Mandatory version of this application is available for download. Application can't continue without installing this version.
Application: Acrobat_com
Installed version: 2.0.0.0
Update Version : 2.3.0.0
Download now Quit
Release notes ( this is blank)
After selecting 'Download Now' I get the following message;
Download failed
There was an error downloading the update. Error #16820
Close -
When deploy multiple updates, some updates fail with Hash does not match expected
If I deploy a few updates (less than 5) the deployment completes without any issues. If I have a lot of updates, most the updates install with no issues but some, and not always the same update, fails with an error in the CAS.log on the client
that states "Hash does not match expected" after several reties the update will download and install.
What could be causing this?
I have setup a new folder that is not on the root of the drive. This has not help with this issue but is handy in organization.
Ashley
County of San Bernardino
Assessor\Recorder\Clerk
Automated System AnalystIt you don't do anything and the hash calculates and downloads correctly then I would look to a network error of packet corruption or something wrong with the DP.
http://www.sccm-tools.com http://sms-hints-tricks.blogspot.com -
Please help: Utility used to install the update failed with exit code {0}.
Hi,
I admit to being a relative newbie at Solaris 10 administration, so please exercise forbearance on my behalf.
I have just installed Solaris 10 11/06 on my laptop x86. Everything went fairly smoothly. I used the Installation Check Tool 1.2 to decide if my machine was adequate to run the OS and with the exception of a NIC driver, it was. I downloaded the sfe driver and configured networking and it seems to work exceptionally well. However, when I run Update Manager in JDS (the only way I know how to run it), it fails to update some of the packages. Sometimes, if I retry the same packages, sometimes it will eventually work. But it keeps failing with the following error on a consistent basis over the last several days:
Utility used to install the update failed with exit code {0}.
I hunted around on the web and the results were not promising. Is there a log somewhere that will give me the actual error or do y'all know of a quick fix.
Thanks,
WillThat is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting. -
Utility used to install the update failed with exit code 1
Hello!
When I try to install an update on my system, the following happens:
# smpatch update -i 119116-22
Update 119116-22 will not be downloaded since it already exists in the download directory.
Installing patches from /var/sadm/spool...
Failed to install patch 119116-22.
Utility used to install the update failed with exit code 1.
Validating patches...
Loading patches installed on the system...Done!
Loading patches requested to install.Done!
Checking patches that you specified for installation.Done!
Approved patches will be installed in this order:119116-22
Preparing checklist for non-global zone check...Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting.
Failed to install patch 119116-22.
ALERT: Failed to install patch 119116-22.
Does anyone know how to fix this?
TIA
StephanThat is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting. -
Itunes new update failed with an error R6034
Itunes update failed with several error R6034
Follow the directions of tt2 in: https://discussions.apple.com/thread/5822086
-
update failed with lightroom CC. Tried retry several times no success. says contact customer support (49)
Same here, New user so everything was a new install ( no existing lightroom or photoshop installed ) when it tried to do the updates I get the same error message. I am a monthly subscriber so the install was across the internet. Windows 8.1
-
Updates fail with error 1328 I have re-installed XI Pro twice without problems.
2
William D. Burstow, CPG, QP
Consulting Economic Geologist
Tel: 541.573.1078
Email: <mailto:[email protected]> [email protected] -
Windows 8 Windows Update fails with error 80244FFF
Windows 8 Windows Update fails with error 80244FFF
Hi @SURAJITsaha ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14-b049tu Sleekbook and issues with a Windows update.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue.
You might have to temporarily disable your virus protection.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
VS 2013 Build tools installation fails with error "Signature or catalog could not be verified"
VS 2013 ultimate - Build tools installation fails with error "Signature or catalog could not be verified" for MSBuild assemblies. Any idea what could be the problem?
Thanks
NMHello,
Do you mean you are trying to use this tool:
https://www.microsoft.com/en-us/download/details.aspx?id=40760
Can you navigate to your %temp% folder and filter by date to see the log of the Build tool?
I want to know which assemblies failed to be verified.
By the way, since MSBuild is embed in Visual Studio why you want to install this again? Do you have any error about this Build Tool when you install Visual Studio 2013 Ultimate?
“Signature or catalog could not be verified” is always related to corrupt source
, please double check you have a healthy network and then try the web installer again.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Critical patch update fails with error code 73
RDBMS Version: 10.2.0.3
Operating System and Version: solaris 5.9
Error Number (if applicable): error code 73
Product (i.e. SQL*Loader, Import, etc.): oracle server enterpirse edition
Product Version: 10.2.0.3
Critical patch update fails with errors(urgent)
UD00_102030>pwd
/mnt/base_install/downloads/10gR2/cpu/6394981
UD00_102030> opatch apply
Invoking OPatch 10.2.0.3.0
Oracle interim Patch Installer version 10.2.0.3.0
Copyright (c) 2005, Oracle Corporation. All rights reserved..
Oracle Home : /u01/app/oracle/product/10.2.0
Central Inventory : /u01/app/oracle/oraInventory
from : /var/opt/oracle/oraInst.loc
OPatch version : 10.2.0.3.0
OUI version : 10.2.0.3.0
OUI location : /u01/app/oracle/product/10.2.0/oui
Log file location : /u01/app/oracle/product/10.2.0/cfgtoollogs/opatch/opatch2007-10-19_19-53-31PM.log
Failed to load the patch object. Possible causes are:
The specified path is not an interim Patch shiphome
Meta-data files are missing from the patch area
Patch location = /mnt/base_install/downloads/10gR2/cpu/6394981
Details = PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
ApplySession failed: PatchObject constructor: Input file "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/actions" or "/mnt/base_install/downloads/10gR2/cpu/6394981/etc/config/inventory" does not exist.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 73
This cpu oct 2007 patch for 10.2.0.3(for solaris)That's great :) ...
Does anybody know which is the difference between
opatch napply
and
opatch apply ?
thanks,
P. -
Resolved - CS6 Updates Fail with U44M1P7
CS6 Design & Web Premium - all product updates fail with U44M1P7 since Creative Cloud was introduced.
Two questions:
1. I saw earlier case which pointed to http://helpx.adobe.com/photoshop/kb/photoshop-cs6-updates-dont-install.html. For my clarification, does this solution mean I have to Uninstall & Reinstall CS6 from scratch?
2. I did not mean to install, nor do I want Creative Cloud. So how do I get it off my computer and keep it off?
Thanks, George
UPDATE:
This was a Windows7 Ultimate 64-bit system
No Replies, but persistence prevails ...
Following resoplution steps worked for me, resulting in all products being Up To Date post reboot:
1. Start > Control Panel > Uninstall "Adobe Extension Manager CS6"
2. Reboot
3. Reinstall "Adobe Extension Eanager CS6"
a. I had original download files saved and used them.
b. But, download from http://www.adobe.com/exchange/em_download/em6_download.html produced same files
4. Reboot
5. Performed Validations:
a. Started Adobe Application Manager (which starts Creative Cloud)
1. Select "Install or update an application" and all products are noted as "Up to date".
b. Started Adobe Creative Cloud
1. Select "Install or update an application" and all products are noted as "Up to date".
c. Selected "Help > Updates" from within Dreamweaver, Fireworks & Photoshop (64-bit) CS6 (random choices)
1. All products are noted as "Up to date".
FYI, I noted that some other cases noted resolution with install of "Extension manager CC" (i.e. Createive Cloud)
I did not install this product.
Case closed for me. Hope this helps someone else.I will suggest to uninstall the Photoshop CC and completely clean Photoshop CC using Creative Cloud Cleaner tool.
you can download CC cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html
and cleaning reinsall phothshop CC using Creative cloud and then try to update the application.
Please let us know incase if you still face any issue -
Photoshop CC updates fail with DF045
My Photoshop CC updates fail with U44M1P7. The error log shows a number of files corrupted with DF045 suggesting that the application should be reinstalled. What is the correct method of doing this with CC without loosing settings or causing account problems?
I will suggest to uninstall the Photoshop CC and completely clean Photoshop CC using Creative Cloud Cleaner tool.
you can download CC cleaner tool from : http://www.adobe.com/support/contact/cscleanertool.html
and cleaning reinsall phothshop CC using Creative cloud and then try to update the application.
Please let us know incase if you still face any issue -
10.9.3 update fails with error 513
Hi,
I'm attempting to update a Macbook Pro 13" to 10.9.3. The update fails with "The file couldn't be saved because you don't have permission.(513)" I've tried recommendations such as different user account and download the update from Apple directly bypassing the App Store. Neither worked. I enabled root and logged in as root and got the same error. Ideas please!!Permission repair, too?
Take a look here: https://discussions.apple.com/thread/3811748?start=0&tstart=0
And possibly here: https://discussions.apple.com/thread/3889562
Maybe you are looking for
-
Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.
Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP. I have NEVER had a problem ru
-
Navigation failure on master/detail form
I have a master/detail (tabular) form that was created with the wizard. I have purposely not modified much of the two pages, so as to see how they work. For the most part, it works as I expect. As it sits, it is nearly as it was on creation. I've not
-
Easy Points for the Quickest Poster
Worlds dumbest question, I'm sure, but for the life of me I can't figure this out: Video_TS folder .... does DVDSP automatically create one for every project or do I have to export one? I can't find a button to create one and all I see on my hard dri
-
Copy and paste WiFi WPA key in Lucid
How can I copy and paste a 63 character WiFi WPA key in the LG Lucid phone? The key is totally random and the chances of typing it correctly are slim at best. The WPA standard allows up to 63 character for a key. I would like to put a file on the
-
Safari: 'empty cache' is gone !!??
When I click on the heading 'Safari' I can not choose 'empty cache' from the pull down menu because the sentence is gone!? How can I get it back? I don't know how the sentence disappeared from the menu... but it is gone !