SSO and Discoverer

Hi,
Please help me in configuring SSO and Discoverer. How can i configure Discoverer so that the SSO user credentials will be propogated to Discoverer?
Thanks

Hi
I'm trying to configure SSO with discoverer. I followed several documents like SSO Admin Guide, etc.
When I log onto Discoverer/plus it takes me to the single sign on page, however after I enter SSO username/password - it still takes me to the database name username/password logon screen. It doesn't seam to find the user I set up in the oiddas URL .
There doesn't seam to be much documentation in particular to set up discoverer with SSO, there is a good metalink note 199072.1 which shows how to set it up for Forms.
Did anybody experience similiar problem to me, i.e. keeps on going to logon screen to enter username/password and database name, even after it accepts the SSO username/password.
Thanks
Regards
Sat

Similar Messages

Portal integration with E-Business and Discoverer 10g

Hello Everyone,
We have a R12 integrated with SSO/OID. We also have a standalone Oracle BI Discoverer 10g. We want to implement Oracle Portal here. One of the requirements of this project is to have a common home page for both E-Business Suite login as well Discoverer access. Right now E-Business Suite login is seperate and Discoverer home page is seperate (because it comes from a Standalone installation)
1) What are the benefits of having AS Portal 10g for end users ?
2) To begin with, we would like to go with the minimum portlets.
3) Is it possible to have a common home page for both E-Biz access and the Discoverer acess after Portal integration ?
4) Do you have some screenshots of how things look after Portal integration
-Thanks
Srinivas

Hi,
take a look in metalink Note:313418.1. :
"Using Discoverer 10.1.2 with Oracle E-Business Suite 11i"
Look in section 6 - post installation.
Follow the steps and have a very good luck.

AS 10g SE now includes Reports and Discoverer?

I've read some articles about the "new" AS that it has been "re-packaged" (licensewise) and that the BI stuff like Reports and Discoverer are included in the Std Ed. Also (in the FAQ I think) that some EE stuff has been moved "down" to SE - sounds promising! But I have not been able to verify this... Anyone out there?

I urge Oracle do the same for Discoverer.
We have been using Discoverer since 3i. This year, we had some people on 3i still and some on 4i. We went through the conversion to 4i and no one is using 3i at all now. These people are very used to how Discoverer works. They are used to using database authentication and security to workbooks.
The Infrastructure can store connection information for each user. By default, it stores connection information in cookies on the user's machine but you can configure the Infrastructure to store this data for you. The Infrastructure also stores metadata for Discoverer Portlets (Portal required).
So that is it. If you are not using Portal nor care about storing connection information in a database, then why even have the Infrastructure for Discoverer? Just like Reports and Forms, if you aren't using SSO or Portal, there is no need for the Infrastructure and Oracle should provide an installer to let you install Discoverer without having the Infrastructure sitting there.
Here is the doc on Metalink that explains what the Infrastructure does with Discoverer 9i.
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=224871.1
I also spoke with John Entenmann at ODTUG in Miami this year and asked him if Discoverer works and is supported in an install without the Infrastructure. He agreed that if you are not using Portal or SSO, you don't need the Infrastructure with Discoverer 9i.
Now Oracle needs to support Discoverer customers in the same way they are going to support Forms and Reports customers by providing a more reasonable installer that doesn't require the Infrastructure to be installed first.

Oracle Portal,Forms,Reports and Discoverer 11G

Good evening
I installed the following products
* Oracle Database(to the 1st computer)
* Repository Creation Utility
* WebLogic Server(to the 2nd computer)
* Oracle Portal,Forms,Reports and Discoverer 11G(to the 2nd computer) – during installation I chose forms and reports
Identity Management and SSO are not installed, why they are used for?
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.

Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.?

VPD and discoverer portlets

Hi,
Resolution History
23-MAY-07 16:53:02 GMT
### What kind of problem do you have? ###
Security Issues
### Describe the problem you are having in detail. Include any notes, guides, or documentation
that you have followed. ###
We have test implementation of VPD or row-level security at database level. This works fine with discoverer queries. At the
portal level we are okay with getting discoverer portlets via a public
connection (the VPD works fine).
Q1. What kind of parameter form would be better for discoverer portlets so that we retrieve list of values via a sql query? Simple parameter form allows static list of values so any suggestion on what parameter would be good and easy to implement to write sql queries.
Q2. With parameters form of some kind we are trying to limit the list of values for each parameter that we have at the portal based on the user logon at the portal somehow married up to database users. (FYI-- we don't have SSO for discoverer). Any suggestions as to how this can be implemented also would be greatly appreciated!
Thanks in advance,
-Esther

I really hope someone can help! I'm trying to accomplish the same exact thing! The private connection for each user gets tricky because not all of our users know exactly what they are doing. Please help!!
Alanna

SSO and HTMLDB

We have Oracle® Application Server 10g Release 2 (10.1.2), HTMLDB 1.6.0.00.87
and the Based on authentication scheme from gallery:Oracle Application Server Single Sign-On (HTML DB as Partner Application).
The best way I believe I can explain this issue is by explaining the user actions:
1.User Authenticates through SSO login page.
2.From Portal Launches HTMLDB Application.
3.Authentication is successful.
4.All links, buttons and actions work properly on htmldb application.
5.User clicks link to open page in portal or in discoverer.
6.When the user comes back to the HTMLDB Application and clicks on any link or button the following error is displayed.
500 Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
We have gone through the configuration steps for SSO with HTMLDB and everything looks fine.
Any clues??

I'm sorry Scott, I'll try to clarify.
When you do step 1, how do you first get to the login page, by visiting your application page first?
By Going to the Portal.
Step 2 is not clear to me,
What I mean is that we have a link on Portal to the HTMLDB Application.
I've never done that. Step 3 is not clear to me, if step 1 has already happened then authentication was successful at that point.
I said authentication is successful in step 3, because my understanding is that while the user is authenticated when he/she goes to the portal, once they go to the HTMLDB Application HTMLDB_SSO is used by HTMLDB to verify the credentials of the user. (This portion works fine, and this is what I mean on step 3).
Step 6, "when the user comes back" is something I don't understand the mechanism of. How does this work?
This was pretty bad on my part: What I mean is, the user through a link on the HTMLDB Application opens a page in portal, then leaves portal (either by closing the browser or by selecting the original link the user used to go to the HTMLDB App) and returns to the HTMLDB Application.
If you run your application by first visiting one of its pages before login, then you authenticate to SSO, and then just navigate around in your application (without any Portal/Discoverer links), does it work properly?
Yes, the HTMLDB Application works perfectly, until I go to Portal or Discoverer. If I use Database or HTMDB Authentication everything works perfect.
The error only happens when using SSO.
Thanks if you and I can't figure this out, at least we have made my questions clearer.

SSO and how to Managing User Roles/Privileges with Forms using Oracle db

We are in the process of implementing Oracle Application Server SSO with our custom Forms application using Oracle database -- all 10.2.0.1.0 version.
In our Forms Applications, we have about a dozen roles we have assigned to various users. We need to identify each user using our Forms because we are using the GLOBAL USER throughout the application.
Questions:
-- Do we have to create users/passwords in both OID and application database?
-- Is there a way to easily manage the user and passwords between SSO and Forms App/database in one place? For example, how does a user change their password once, but actually change it in both the database and SSO?
Any advice and/or direction would be greatly appreciated.
Thank you,
Mika
Edited by: user11846198 on Sep 1, 2009 1:41 PM
Edited by: user11846198 on Sep 1, 2009 1:53 PM

Yes, you can have global roles in the DB and assign this roles to specific OID users, and the will heritage the privilages, you can do this using Oracle Identity Management Web Tool http://hostname:7777/oiddas is not complicated.
Greetings.

Java SSO and IIS

This is a repeat of this post: Java SSO and IIS
Noone answered there.
Hello,
my organization uses Java SSO authentication in Oracle Application Server. Now we want to "expand" SSO so that our IIS applications can benefit from Oracle SSO and user needn't print user name / password again. Is there any way to use Java SSO in IIS? In this project we use Java SSO, not Oracle Identity Management.
Thanks in advance

Hi ,
I was installed and configured policy agent successfully.while i am trying to access the application url i am getting following error.
I am using IIS6.0 and access manager 7.1.
Error 2824:15b9918 AuthService: AuthService::processLoginStatus() Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp.
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyEngine: am_policy_evaluate: InternalException in AuthService::processLoginStatus() with error message:Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp and code:3
2009-03-10 00:03:05.828 Warning 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) denying access: status = Access Manager authentication service failure
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html.
2009-03-10 00:03:05.828 Info 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) returning status: Access Manager authentication service failure.
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: HttpExtensionProc(): status after am_web_is_access_allowed = Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyAgent: HttpExtensionProc(): status: Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: OnSendResponse(): HTTP Status code is 500
can any one please help me to resolve this.
Thanks
Ramesh Kumar GV

SSO and external applications

Hello folks,
Due to my inexperience with PS6, I'm looking for some high-level outline that will help me look in the right places and understand things better here.
I have an external application that requires authentication via a web form (or by attaching the username and password on the URL as parameters).
What I want to do is have a channel of this application and utilize information from the SSO mechanism to redirect the request to that remote app and provide the credentials for a transparent login.
From what I understand this can be done by having a servlet in that channel to retrieve the credentials of the user for that remote application from the SSO and then redirect to the external application, attaching the credentials to the URL.
Is the above correct? I would appreciate any pointers or considerations since my experience with PS is minimal.
Thanks in advance,
Manos

I don't see a way to that servlet to retrieve a password for the user - it's not stored in the session.
There are following options:
1. OpenText LiveLink way: You have some "hidden" password for every user (based on user's ID and a shared key) known only to your server and this servlet. Servlet will supply this password.
2. Normal way - web server: Implement login module to this application, which will trust REMOTE_USER variable provided by the agent on the web server.
3. Normal way - standalone app: Implement login module to this application which will validate DSAME session cookie on the DSAME server. You can use example code in the SUNWam/samples/ of your server.

Oracle Portal and Discoverer Integration

Portal Version: 9.0.2.0.1
RDBMS Versjion: 9.0.1.3
OS/Vers. Where Portal is Installed:: Suse 7 SLES
Error Number(s)::
Oracle Portal and Discoverer Integration
We're trying to integrate Discoverer with Portal unsuccessfully.
We made many things in accordance with oracle's documentation until add discoverer portlets (worksheet and list of workbooks) in a test page.
In view mode, the worksheet portlet shows the error:
"The portlet has not been defined. The publisher must define the portlet by clicking on Edit Defaults for the portlet on the edit mode of this page. Please contact the publisher of this page."
We think we have to edit properties before. Is this? Anyway edit worksheet portlet crashes between step 1 and 2. The error is: "The listener returned the following Message: 500 Internal Server Error".
We have a public conection created in EM and a discoverer application which can be viewed using plus or viewer.
Furthermore, it's not possible delete the added portlets neither the page that contain it. The error at delete is:
Error: An unexpected error occurred: User-Defined Exception (WWC-44082)
(WWC-00000)
An unexpected error has occurred in portlet instances: User-Defined Exception (WWC-
44846)
An unexpected error occurred: User-Defined Exception (WWC-43000)
The following error occurred during the call to Web provider:
oracle.portal.provider.v2.PortletNotFoundException
at oracle.portal.utils.v2.ContainerException.fillInStackTrace(Unknown Source)
at java.lang.Throwable.<init>(Throwable.java:78)
at java.lang.Exception.<init>(Exception.java:29)
at oracle.portal.utils.v2.ContainerException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletException.<init>(Unknown Source)
at oracle.portal.provider.v2.PortletNotFoundException.<init>(Unknown Source)
at oracle.disco.portlet.provider.DiscoPortletPersonalizationMgr.destroy
(DiscoPortletPersonalizationMgr.java:65)
at oracle.portal.provider.v2.DefaultPortletInstance.deregister(Unknown Source)
at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.deregisterPortlet
(Unknown Source)
at java.lang.reflect.Method.invoke(Native Method)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.doMethodCall(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.processInternal(Unknown Source)
at oracle.webdb.provider.v2.utils.soap.SOAPProcessor.process(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.doSOAPCall(Unknown Source)
at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
at com.evermind.server.http.ResourceFilterChain.doFilter
(ResourceFilterChain.java:59)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
at com.evermind.server.http.ServletRequestDispatcher.invoke
(ServletRequestDispatcher.java:523)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal
(ServletRequestDispatcher.java:269)
at com.evermind.server.http.HttpRequestHandler.processRequest
(HttpRequestHandler.java:735)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:151)
at com.evermind.util.ThreadPoolThread.run(ThreadPoolThread.java:64)
(WWC-43147)
Edit properties for portlet List of Workbook works but in view mode we have the error in the portlet area:
"Failed to refresh portlet. Please verify that the information used to create the
portlet instance or customization is still valid. Otherwise, please contact your
iAS administrator. oracle.discoiv.controller.FatalControllerException:
DiscoNetworkException - Nested exception: org.omg.CORBA.OBJECT_NOT_EXIST: minor
code: 0 completed: No null"
Any ideas?
Thanks

Hi there,
Have you applied any patches to 9ias since it was first installed? We had the same problem and had to apply a couple of patches to get the portlets working.
1. Apply the 9.0.2.53.16 one-off patch for Oracle 9iAS Discoverer which takes Discoverer up to 9.0.2.53.16. This patch appears to be password protected and you need to get someone at Oracle support to give you a password.
2. Apply the Discoverer Portlet Provider: 9.0.2.53.00c patch (patch no. 2595444) which gives you a new discportal.xsl file that actually works. It's this second step that solves your problem but you need to do step 1 before this. This is password protected as well.
3. As you've upgraded Disco on the server to 9.0.2.53, you'll need to upgrade Disco Admin & Desktop within your 9iDS installation using patch no. 2555265. This is because Disco 9.0.2.53 uses an upgraded EUL that Disco Admin & Desktop need to be patched to use.
This was the course of action Oracle support advised us about nine months ago. Of course they may have released a further patch to Disco that does 1 & 2 in one go, but we regularly carry out steps 1 and 2 on servers we use and we can use the Disco portlets successfully.
Hope this helps
Mark Rittman
[email protected]

ADFS SSO and SharePoint 2013 on-premise Hybrid outbound search results from SharePoint Online - does it work?

Hi,
I want to setup an outpund hybrid search for SharePoint 2013 on-premise to SharePoint Online.
But I'm not shure if this works with ADFS SSO.
Has somebody experience with this setup?
Here's my guide which I'm going to use for this installation:
Introduction
In this post I'll show you how to get search results from your SharePoint Online in your SharePoint 2013 on-premise search center.
Requirements
User synchronisation ActiveDirectory to Office 365 with DirSync
DirSync password sync or ADFS SSO
SharePoint Online
SharePoint 2013 on-premise
Enterprise Search service
SharePoint Online Management Shell
Instructions
All configuration will be done either in the Search Administration of the Central Administration or in the PowerShell console of your on-premise SharePoint 2013 server.
Set up Sever to Server Trust
Export certificates
To create a server to server trust we need two certificates.
[certificate name].pfx: In order to replace the STS certificate, the certificate is needed in Personal Information Exchange (PFX) format including the private key.
[certificate name].cer: In order to set up a trust with Office 365 and Windows Azure ACS, the certificate is needed in CER Base64 format.
First launch the Internet Information Services (IIS) Manager
Select your SharePoint web server and double-click Server Certificates
In the Actions pane, click Create Self-Signed Certificate
Enter a name for the certificate and save it with OK
To export the new certificate in the Pfx format select it and click Export in the Actions pane
Fill the fields and click OK Export to: C:\[certificate
name].pfx Password: [password]
Also we need to export the certificate in the CER Base64 format. For that purpose make a right-click on the certificate select it and click on View...
Click the Details tab and then click Copy to File
On the Welcome to the Certificate Export Wizard page, click Next
On the Export Private Key page, click Next
On the Export File Format page, click Base-64 encoded X.509 (.CER), and then click Next.
As file name enter C:\[certificate
name].cer and then click Next
Finish the export
Import the new STS (SharePoint Token Service) certificate
Let's update the certificate on the STS. Configure and run the PowerShell script below on your SharePoint server.
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# import it
Set-SPSecurityTokenServiceConfig -ImportSigningCertificate $PfxCert
Type Yes when prompted with the following message.
You are about to change the signing certificate for the Security Token Service. Changing the certificate to an invalid, inaccessible or non-existent certificate will cause your SharePoint installation to stop functioning. Refer
to the following article for instructions on how to change this certificate: http://go.microsoft.com/fwlink/?LinkID=178475. Are you
sure, you want to continue?
Restart IIS so STS picks up the new certificate.
& iisreset
& net stop SPTimerV4
& net start SPTimerV4
Now validate the certificate replacement by running several PowerShell commands and compare their outputs.
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
# get the encrypted pfx certificate object
New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# compare the output above with this output
(Get-SPSecurityTokenServiceConfig).LocalLoginProvider.SigningCertificate
[/code]
## Establish the server to server trust
[code lang="ps"]
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
Import-Module MSOnline
Import-Module MSOnlineExtended
# set the cerficates paths and password
$PfxCertPath = "c:\[certificate name].pfx"
$PfxCertPassword = "[password]"
$X64CertPath = "c:\[certificate name].cer"
# set the onpremise domain that you added to Office 365
$SPCN = "sharepoint.domain.com"
# your onpremise SharePoint site url
$SPSite="http://sharepoint"
# don't change this value
$SPOAppID="00000003-0000-0ff1-ce00-000000000000"
# get the encrypted pfx certificate object
$PfxCert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2 $PfxCertPath, $PfxCertPassword, 20
# get the raw data
$PfxCertBin = $PfxCert.GetRawCertData()
# create a new certificate object
$X64Cert = New-Object System.Security.Cryptography.X509Certificates.X509Certificate2
# import the base 64 encoded certificate
$X64Cert.Import($X64CertPath)
# get the raw data
$X64CertBin = $X64Cert.GetRawCertData()
# save base 64 string in variable
$CredValue = [System.Convert]::ToBase64String($X64CertBin)
# connect to office 3656
Connect-MsolService
# register the on-premise STS as service principal in Office 365
# add a new service principal
New-MsolServicePrincipalCredential -AppPrincipalId $SPOAppID -Type asymmetric -Usage Verify -Value $CredValue
$MsolServicePrincipal = Get-MsolServicePrincipal -AppPrincipalId $SPOAppID
$SPServicePrincipalNames = $MsolServicePrincipal.ServicePrincipalNames
$SPServicePrincipalNames.Add("$SPOAppID/$SPCN")
Set-MsolServicePrincipal -AppPrincipalId $SPOAppID -ServicePrincipalNames $SPServicePrincipalNames
# get the online name identifier
$MsolCompanyInformationID = (Get-MsolCompanyInformation).ObjectID
$MsolServicePrincipalID = (Get-MsolServicePrincipal -ServicePrincipalName $SPOAppID).ObjectID
$MsolNameIdentifier = "$MsolServicePrincipalID@$MsolCompanyInformationID"
# establish the trust from on-premise with ACS (Azure Control Service)
# add a new authenticatio realm
$SPSite = Get-SPSite $SPSite
$SPAppPrincipal = Register-SPAppPrincipal -site $SPSite.rootweb -nameIdentifier $MsolNameIdentifier -displayName "SharePoint Online"
Set-SPAuthenticationRealm -realm $MsolServicePrincipalID
# register the ACS application proxy and token issuer
New-SPAzureAccessControlServiceApplicationProxy -Name "ACS" -MetadataServiceEndpointUri "https://accounts.accesscontrol.windows.net/metadata/json/1/" -DefaultProxyGroup
New-SPTrustedSecurityTokenIssuer -MetadataEndpoint "https://accounts.accesscontrol.windows.net/metadata/json/1/" -IsTrustBroker -Name "ACS"
Add a new result source
To get search results from SharePoint Online we have to add a new result source. Run the following script in a PowerShell ISE session on your SharePoint 2013 on-premise server. Don't forget to update the settings region
if(-not (Get-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction SilentlyContinue)){Add-PSSnapin "Microsoft.SharePoint.PowerShell"}
# region settings
$RemoteSharePointUrl = "http://[example].sharepoint.com"
$ResultSourceName = "SharePoint Online"
$QueryTransform = "{searchTerms}"
$Provier = "SharePoint-Remoteanbieter"
# region settings end
$SPEnterpriseSearchServiceApplication = Get-SPEnterpriseSearchServiceApplication
$FederationManager = New-Object Microsoft.Office.Server.Search.Administration.Query.FederationManager($SPEnterpriseSearchServiceApplication)
$SPEnterpriseSearchOwner = Get-SPEnterpriseSearchOwner -Level Ssa
$ResultSource = $FederationManager.GetSourceByName($ResultSourceName, $SPEnterpriseSearchOwner)
if(!$ResultSource){
Write-Host "Result source does not exist. Creating..."
$ResultSource = $FederationManager.CreateSource($SPEnterpriseSearchOwner)
$ResultSource.Name = $ResultSourceName
$ResultSource.ProviderId = $FederationManager.ListProviders()[$Provier].Id
$ResultSource.ConnectionUrlTemplate = $RemoteSharePointUrl
$ResultSource.CreateQueryTransform($QueryTransform)
$ResultSource.Commit()
Add a new query rule
In the Search Administration click on Query Rules
Select Local SharePoint as Result Source
Click New Query Rule
Enter a Rule name f.g. Search results from SharePoint Online
Expand the Context section
Under Query is performed on these sources click on Add Source
Select your SharePoint Online result source
In the Query Conditions section click on Remove Condition
In the Actions section click on Add Result Block
As title enter Results for "{subjectTerms}" from SharePoint Online
In the Search this Source dropdown select your SharePoint Online result source
Select 3 in the Items dropdown
Expand the Settings section and select "More" link goes to the following URL
In the box below enter this Url https://[example].sharepoint.com/search/pages/results.aspx?k={subjectTerms}
Select This block is always shown above core results and click the OK button
Save the new query rule

Hi Janik,
According to your description, my understanding is that you want to display hybrid search results in SharePoint Server 2013.
For achieving your demand, please have a look at the article:
http://technet.microsoft.com/en-us/library/dn197173(v=office.15).aspx
If you are using single sign-on (SSO) authentication, it is important to test hybrid Search functionality by using federated user accounts. Native Office 365 user accounts and Active Directory Domain Services
(AD DS) accounts that are not federated are not recognized by both directory services. Therefore, they cannot authenticate using SSO, and cannot be granted permissions to resources in both deployments. For more information, see Accounts
needed for hybrid configuration and testing.
Best Regards,
Eric
Eric Tao
TechNet Community Support

Advantage and disadvantage of xml publisher, report builder and discoverer

Hi,
anyone can explain advantage and disadvantage of xml publisher, report builder and discoverer?
thanks in advance!

The best way i found was to put a equals and then double quotes... this only works for excel however it will allow you to cut and paste (ie to use the value to search in Oracle) and also to do vlookups.
In a bit more detail:
- I used word to generate my default table
- this created a field INVOICE_NUM
- in the cell in the table i put = " before the INVOICE_NUM field and then put the closing " afterwards.
The theory is that excel will concatenate the values together... because it has quotes around it, it will treat it as a string rather than simply a value.
For any other formats this will not work.
I'm guessing most people have moved on and resolved this some other way, but just thought I'd share the wealth!

SSO and WebUtil

Hi,
I have a form that was working with webutil. We implemented SSO on the server. Know the webutil jar file does not load - it can not find it.
Getting the following message in java console:
Loading http://capps.cauto.com/forms90/webutil/webutil.jar from JAR cache
Loading http://capps.cauto.com/forms90/webutil/jacob.jar from JAR cache
Loading http://capps.cauto.com/forms90/java/f90all_jinit.jar from JAR cache
RegisterWebUtil - Loading Webutil Version 1.0.2 Beta
Loading http://capps.cauto.com/forms90/java/rolloverbutton.jar from JAR cache
Loading http://capps.cauto.com/forms90/java/hyperlink.jar from JAR cache
connectMode=HTTP, native.
Forms Applet version is : 90290
java.io.IOException: Could not connect to http://wadjet.cauto.com/forms90/webutil/webutil.jar
     at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
     at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
     at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
Has anyone use SSO and webutil?
Thanks,
Mary Santry

Mary,
using single sign-On with Forms should not have an impact to webutil.jar.
Just to be sure: You configured webutil and it works if not running using single sign-on. You configured Forms to use singke sign-on (uncommenting th emod_osso directive in forms90.conf file) and from now on webutil.jar cannot be found.
What if you directly try and request the webutil.jar file from a Browser
http://wadjet.cauto.com/forms90/webutil/webutil.jar ?
Can you access jacob.jar using a Browser URL?
Fran

SSO and BiBeans

Hi,
i want to use SSO with Bi Beans. I have my BiBeans deployed on a 9iasR2 (9.0.2.3). I edit the mod_osso.conf with <Location /*appname*> require valid-user authType Basic </Location> and i have in BIController uncomment the sso blocks.
After authenticated to the SSO, i got always a NullPointerException. I looked in the code and i found that application.getBISession() is not initalized.
Please, have anybody an idea, or knows anybody a documentation about SSO and BIBeans.
best regards
Rene

cn=XXX information is missing for the SSO Server (orasso) when going to http://servername:7777/pls/orasso/orasso.home. Is that causing the problem? If so, how can I resolve it?
Thanks.
Andy

SSO and success URL with parameters

Hello
I have succeeded to configure HTML_DB engine as Partner App for Oracle SSO.
HTML_DB 1.5.0.00.33
Oracle IAS Release 1 ehk 1.0.2.2.2
I'm entering into HTMLDB application from outside directly to concrete page with concrete parameters. The calling outside app is authenticated with SSO.
Example URL: http://host/pls/DAD/f?p=103:3:::::PAR1,PAR2:VAL1,VAL2
I'm then authenticated checked against SSO and redirected to my requested page, but the parameters are lost. The URL looks like http://host/pls/DAD/f?p=103:3:987698769876098
It only happens at first try. Next time I have a session and I'm redirected together with parametes.
It seams that this http://host/pls/DAD/wwv_flow_custom_auth_sso.process_success is getting somehow wrong parameter URLC. Without parameters. Why?
Please help!
Yours,
jan lakspere

Hi
Thanks, Scott.
This patch 1.5.1 solved this problem. Now SSO redirect forwards the parameters together with URL.
Yours,
jan

SSO and Discoverer

Similar Messages

Maybe you are looking for