SSO and Forms/Reports Standalone Installation
Hi,
we have different Oracle AS as forms/reports standalone installations in our company.
SSO_FORMSID and GROUP_DN were configured during the OracleAS installation. So you have during installation to define OID parameters (host, port). But that input is only required within complete application server installation.
In standalon installation you cannot define OID setting.
But in formsConfig.properties and formsweb.cfg placeholder for SSO are available.
So it is possible to use standalone forms with SSO. And how can I do that.
I understand that I have to define SSO_FORMSID for application server and same ID I have to register in OID. But how?1
br Kay Basler
The SSO information is included in those files because they are standard files across all installation types. Without the full installation (Infrastructure and Middle Tier) you cannot use SSO.
Refer to the following for a list of all restrictions associated with the Forms/Reports Services installation:
http://www.oracle.com/technology/products/forms/htdocs/10g/FormsReportsServicesInstallation.htm
Similar Messages
-
Forms & Reports standalone 10.1.2.0.2: clustering possible
Hello group,
if I understand Oracle's documentation correctly, a farm (either file- or database based) is needed to create clustered Forms&Reports instances. Just to be sure, could somebody please confirm this? Or may it be possible to create a cluster with to Forms&Reports standalone instances?
Thanks in advance for any input,
MartinHi,
we have 3 machine configures with OC4J clustering. All clients accesses machine 1 and are redirected on machine 1, 2 or 3 according to the load.
I have a little how-to, but it is in french :
Les deux machines doivent se voir (ping).
Installer les services Forms et Reports sur les n machines.
Sur la machine 1, vérifier que OAS est en mode standalone :
<oracle_home>/dcm/bin/dcmctl whichfarm
Doit répondre : Standalone instance
Création du repository pour l’infrastructure sur la machine 1 :
<oracle_home>/dcm/bin/dcmctl getRepositoryid
Renvoie le nom du repository : vdn-frm6.rpn.ch:7100
Création d’une ferme sur la machine 1 :
<oracle_home>/dcm/bin/dcmctl joinFarm –r vdn-frm6.rpn.ch:7100
Vérification de la création de la ferme :
<oracle_home>/dcm/bin/dcmctl whichfarm
Doit, entre autres, donner le nom de la ferme (C:.oracle.orafrm.dcm.repository).
Vérifier que les n autres machines sont en mode standalone :
<oracle_home>/dcm/bin/dcmctl whichfarm
Doit répondre : Standalone instance
Faire entrer les n autres machines dans la ferme. Sur chaque machine :
<oracle_home>/dcm/bin/dcmctl joinFarm –r vdn-frm6.rpn.ch:7100
La commande suivante permet, sur une machine, de voir si la ferme contient bien
toutes les machines ajoutées :
<oracle_home>/dcm/bin/dcmctl listInstances
Modifier les fichiers <oracle_home>/forms90/server/forms90.conf sur toutes les machines
de la manière suivante (exemple pour deux machines) :
Remplacer ce qui suit :
Oc4jMount /forms90 OC4J_BI_Forms
Oc4jMount /forms90/f90servlet OC4J_BI_Forms
Oc4jMount /forms90/f90servlet/* OC4J_BI_Forms
Oc4jMount /forms90/l90servlet OC4J_BI_Forms
Oc4jMount /forms90/l90servlet/* OC4J_BI_Forms
Par ceci :
Oc4jMount /forms90 instance://INF1.vdn-frm8.rpn.ch:OC4J_BI_Forms,INF1.vdn-frm7.rpn.ch:OC4J_BI_Forms
Oc4jMount /forms90/f90servlet instance://INF1.vdn-frm8.rpn.ch:OC4J_BI_Forms,INF1.vdn-frm7.rpn.ch:OC4J_BI_Forms
Oc4jMount /forms90/f90servlet/* instance://INF1.vdn-frm8.rpn.ch:OC4J_BI_Forms,INF1.vdn-frm7.rpn.ch:OC4J_BI_Forms
Oc4jMount /forms90/l90servlet instance://INF1.vdn-frm8.rpn.ch:OC4J_BI_Forms,INF1.vdn-frm7.rpn.ch:OC4J_BI_Forms
Oc4jMount /forms90/l90servlet/* instance://INF1.vdn-frm8.rpn.ch:OC4J_BI_Forms,INF1.vdn-frm7.rpn.ch:OC4J_BI_Forms -
Replacement for 10g Forms&Reports standalone server in 11g?
is there a replacement for the 10g Forms&Reports standalone server in 11g environment? Without the need to install Metadata Repository?
thx, florian.
Edited by: fschulze on Oct 16, 2009 1:12 PMI believe you can install the equivalent in Forms 11g.
If you don't install Portal or Discoverer, then you are not required to install any Metadata repository.
So the steps would be:
1) Install Weblogic Server 11g
2) Install Forms and Report Services 11g
How will you call reports from forms though? -
Oracle forms viewlets about SSO and Forms dont work
hi:
the oracle forms viewlets (in Forms Sample Code) about SSO and Forms dont work. it says html as been modified. i think it's a viewlet builder protection.
thanksuser549194 wrote:
Hi to everyone,
This is a rant on the stupidity of Oracle Forms. From my point of view, it is pointless and VERY PAINFUL to develop.
Come on, who in the right would use Oracle FORMS to develop database applications? Heck, I can develop my very own web application in Servlet and JSP twice as quick as this piece of crappy framework can produce. Who are you trying to kid? Tie down PL/SQL to the application level? The very idea of FORMS is bullshit.
To whoever who is reading this, please flame me all you want. Oracle Forms is a crappy product. Dont't waste your time and efforts using it. You are better off using some other MORE PRODUCTIVE framework. So there.Hello,
I have seen many threads speaking about forms future but discussions were also MORE PRODUCTIVE as your framework
pointless ? I think your thread is pointless...
I will not make the pro-forms against the world... There are so many tools, just make the right choice for your needs.
so go back to your fantastic productive framework and have success with it.
regards
JeanYves -
Automate the database and forms / reports services to start on windows 2008 server R2 startup
Dear memebers,
I want to automate the database and forms / reports services to start on windows 2008 server R2 startup. whats the possibilities and which method is the best?
Regards:Hi,
type services.msc at run
then check for Oracle Services--> Right Click-->Properties-->Startup type-->start automatic
HTH -
How to install database 10g and forms&reports developer 10g?
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideGul wrote:
hi
how to install database 10g and forms & reports developer 10g on windows xp 32 bit? and which one is to install first? how to connect them together? where can i find complete guideThis link will help you http://tahiti.oracle.com/ -
SSO and Form 10g, Setting RAD of OID for DB users identified externally
Please Help!
Current environment:
- All users were created with identified externally in Database (OPS$)
- SSO was setup correctly according to OID admin guide Ch 43 and SSO admin guide ch 8 for App10g. (user login orasso without seeing basic auth/sso login form)
- DB parameters:
remote_os_authent=TRUE
os_authent_prefix=' '
issues:
- set ssoDynamicResourceCreate = true
When user hit the form link, i.e. http://host:port/forms90/f90servlet?config=test&form=appwelcome
it redirects to http://host:7777/oiddas/ui/oracle/ldap/das/mypage/AppCreateResourceInfo?...
where it shows Resource Name TEST and prompts username/password/database
when user inputs window logon /password/database value (same as in form6i)
it returns ORA-01017: invalid username/password; logon denied.
- set ssoDynamicResourceCreate = false
manually set RAD for the end user (I am not sure if I am doing this correctly):
Name = test
TYPE = oracledb
username = (blank)
password = (blank)
datebase = prod
When enduser hits the form link, it returns ORA-01017.... same errors.
Any ideas how to trouble shoot and configure RAD for users with OPS$ auth?
thank you in advance!
KanThank you for your input!
This is how our current production is setup that users use os authent (OPS$) to access forms/reports 6i. I'm just trying to migrate it to app10g environment.
I did configure SSO with WNA, it works fine. Any users can access NON-DB connected forms/reports. Only when forms/reports require DB conn, users who
have db password can access them with one click. But users identified externally will keep seeing Oracle Logon and Ora-01017 after authent into MidTier.
Setup RAI with one real db user account is not ideal since there are 1000+ OS authent users who have different database roles. Turn off the OPS$ and setup dummy password for 1000+ users may be the last solution.
v/r
Kan -
Configuring Forms Reports Standalone 10.1.2.0.2
I'm having issues installing version 10.1.2.0.2 of the Forms and Reports Standalone. I currently have version 9.0.4 installed and am trying to install the newer version in a different directory, as I understand this is supported.
I was able to install it but am having issues with the configuration. First, I got a message that the OPMN process manager failed to start, I continued anyway. Then during the configuration portion, it failed to configure the WebCache.
Am I supposed to stop the processes for the 9.0.4 version before configuring this one? Should I de-install 10.1.2 and start over or leave it and try to reconfigure after stopping 9.0.4? I need both available as we're about to move to IE7 but I can't take ver. 9 down yet.It may be that you have too little memory available during the install. Stop the database and any other memeory hogs, uninstall and delete everything in the 10.1.2 home and try to install again. You don't need WebCache for Forms so deselect that (unless you need it for other stuff). I suggest you call Oracle Customer Support and ask them to help you with this.
Edited by: Jan Carlin on May 7, 2009 12:48 PM -
Need information about Oracle Forms & Reports server installation
Hello Friends,
First of all I am very new user for oracle forums, So please ignore if I posted wrong place.
We are using Oracle Database 10g and Oracle forms & Reports server 6i version.
We just purchased oracle forms & reports (currently known as a Oracle Fusion middleware) license. As per my knowledge latest version doesn't support Oracle 10g database.
My question is can somebody give me Oracle Database 10g supported Forms & Reports version?
We are planning to upgrade.
Help would be really appreciated.
Thanks & Regards.Thanks a lot for prompt response.
I get my answer from your certification matrix. I appreciate your response.
Now second question arise that We are using currently Database version of 10.2.0.1.0.
And in a certification matrix shows supported version Oracle 10.2.0.4+.
Now I am bit confused that currently working database supports or not?
Still i am trying to install on My window 2008 R2 with IIS 7.0.
Let me check what happens.
Again Thanks a lot to ccortez and PaulM for your quick response and help. -
Forms & Reports 11gR2 installation - Can't create domain
Hi, I try to install Forms & Reports 11gR2 (version 11.1.2.2.0) on a Windows 7 64 bits machine. Here is that I try :
Installation of JDK 1.7.0.51 for Windows 7 64 bits
Installation of WebLogic 10.3.6 "Generic" bits (java -Xmx1024m -jar wls1036-generic.jar) without configuration.
Installation of Forms & Reports 11.1.2.2.0 :
- installation without configuratoin
- keep default values for others parameters
Until now, no problems found.
Now, configuration of Forms & Reports :
- for developement
- keep default values
It begins the creation of the domain (<middleware_home>/user_projects/domains/ClassicDomain/...) but after two hours, the statut just says : Error...
Any idea ? I don't what to do now !!!!
Thank you
Some logs :
==============================================================================================================================================================================
End of c:/Programs/Oracle/Invencory/logs/install2014-01-22_11-46-31AM.log :
[2014-01-22T11:48:24.566+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Assigning value:false to variable:CONFIGURE_FOR_DEPLOYMENT
[2014-01-22T11:48:24.573+01:00] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] New Description: Configuration de l'application
[2014-01-22T11:48:24.574+01:00] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] Old Description: Application Configuration
[2014-01-22T11:48:24.664+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Setting valueOf(DOMAIN_HOME_PATH) to:C:/Oracle/Middleware/user_projects/domains/ClassicDomain. Value obtained from:USER
[2014-01-22T11:48:26.517+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2014-01-22T11:48:30.014+01:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.config] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Starting Action:Application Configuration
[2014-01-22T11:48:30.025+01:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] [SRC_CLASS: oracle.as.install.classic.ca.standard.ClassicConfigMain] [SRC_METHOD: doExecute] ENTRY
[2014-01-22T11:48:35.690+01:00] [as] [WARNING] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2014-01-22T11:48:35.764+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Executing a Jaxb workflow ...
[2014-01-22T11:48:35.764+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Begining Oracle Fusion Middleware Configuration ...
[2014-01-22T11:48:35.765+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Begining Oracle Fusion Middleware Configuration ...
[2014-01-22T11:48:35.851+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] ENTRY ASDomain.createDomain
[2014-01-22T11:48:35.851+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] ENTRY ASDomain.createDomain
[2014-01-22T11:48:35.852+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: ENTRY........
[2014-01-22T11:48:35.852+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@520b4c69
[2014-01-22T11:48:35.852+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: 2........
[2014-01-22T11:48:35.853+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: Set the Extion Id to START........
[2014-01-22T11:48:35.853+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: Did the assignment...
[2014-01-22T11:48:35.853+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: EXIT........
[2014-01-22T11:48:36.239+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Domain Home: C:/Oracle/Middleware/user_projects/domains/ClassicDomain
[2014-01-22T11:48:36.239+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Oracle Home: C:/Oracle/Middleware/FRMHome
[2014-01-22T11:48:36.239+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] Setting os object values in Python
[2014-01-22T11:49:23.063+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] RETURN: createDomain
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] RETURN: createDomain
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] ENTRY ASDomain.startDomain
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: ENTRY........
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@5c219c51
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: 2........
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: Set the Extion Id to START........
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: Did the assignment...
[2014-01-22T11:49:23.071+01:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] reportStartConfigAction: EXIT........
[2014-01-22T14:11:43.421+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0]
[2014-01-22T14:11:43.453+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] [[
oracle.as.provisioning.util.ConfigException:
Erreur lors du démarrage du domaine.
Cause:
Temporisation du démarrage du serveur Admin_Server.
Action:
Pour plus de détails, consultez les journaux.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
[2014-01-22T14:11:43.484+01:00] [as] [ERROR] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KEt^8bt0VsAARb7EDP1Iru6f000004,0] [[
oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
==============================================================================================================================================================================
==============================================================================================================================================================================
End of c:/Programs/Oracle/Invencory/logs/install2014-01-22_11-46-31AM.out :
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\FRMHome\install\config\\StartUtil64.dll
DEBUG : Loading DLL : C:\Oracle\Middleware\FRMHome\install\config\\StartUtil64.dll
DEBUG : Loaded DLL : C:\Oracle\Middleware\FRMHome\install\config\\StartUtil64.dll
oracle.as.provisioning.util.ConfigException:
Erreur lors du démarrage du domaine.
Cause:
Une erreur sest produite lors du démarrage du domaine.
Action:
Pour plus de détails, consultez les journaux.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Erreur lors du démarrage du domaine.
Cause:
Temporisation du démarrage du serveur Admin_Server.
Action:
Pour plus de détails, consultez les journaux.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3150)
... 18 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
==============================================================================================================================================================================Hi,
I also get stuck in create domain step , but can't find any error in the log file.
Can anyone help. Thks.
[2014-04-19T10:10:06.664+08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Assigning value:false to variable:CONFIGURE_FOR_DEPLOYMENT
[2014-04-19T10:10:06.676+08:00] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] New Description: Application Configuration
[2014-04-19T10:10:06.677+08:00] [as] [TRACE] [] [oracle.as.install.engine.modules.presentation] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] [SRC_CLASS: oracle.as.install.template.screens.ConfigurationPage] [SRC_METHOD: onDescriptionChange] [CONFIG PAGE] Old Description: Application Configuration
[2014-04-19T10:10:06.688+08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Setting valueOf(DOMAIN_HOME_PATH) to:C:/Oracle/Middle/user_projects/domains/FRM. Value obtained from:USER
[2014-04-19T10:10:08.275+08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2014-04-19T10:10:11.688+08:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.config] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Starting Action:Application Configuration
[2014-04-19T10:10:11.689+08:00] [as] [TRACE:16] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] [SRC_CLASS: oracle.as.install.classic.ca.standard.ClassicConfigMain] [SRC_METHOD: doExecute] ENTRY
[2014-04-19T10:10:15.499+08:00] [as] [WARNING] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2014-04-19T10:10:15.536+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Executing a Jaxb workflow ...
[2014-04-19T10:10:15.537+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Begining Oracle Fusion Middleware Configuration ...
[2014-04-19T10:10:15.538+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Begining Oracle Fusion Middleware Configuration ...
[2014-04-19T10:10:15.564+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] ENTRY ASDomain.createDomain
[2014-04-19T10:10:15.564+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] ENTRY ASDomain.createDomain
[2014-04-19T10:10:15.565+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: ENTRY........
[2014-04-19T10:10:15.565+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@1328fa3c
[2014-04-19T10:10:15.565+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: 2........
[2014-04-19T10:10:15.566+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: Set the Extion Id to START........
[2014-04-19T10:10:15.566+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: Did the assignment...
[2014-04-19T10:10:15.566+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: EXIT........
[2014-04-19T10:10:15.767+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Domain Home: C:/Oracle/Middle/user_projects/domains/FRM
[2014-04-19T10:10:15.767+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Oracle Home: C:/Oracle/Middle/FRHome1
[2014-04-19T10:10:15.767+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] Setting os object values in Python
[2014-04-19T10:10:49.414+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] RETURN: createDomain
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] RETURN: createDomain
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] ENTRY ASDomain.startDomain
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: ENTRY........
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@13dd5ec
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: 2........
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: Set the Extion Id to START........
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: Did the assignment...
[2014-04-19T10:10:49.417+08:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 13] [ecid: 0000KLrjodaFg4WFLzmJOA1JKTek000004,0] reportStartConfigAction: EXIT........ -
Oracle Express and forms/reports
Hi there
If we install Oracle Express database on a remote site with single server can we run Oracle forms/reports on the same server that will connect to the Oracle Express database ?Yes you can. Just create the required Oracle Net conntections and use it in your froms and reports. Ensure that the listener is running.
-
Can on one domain coexist managed servers for ADF11g and Forms&Reports 11g
Is it possible on one Weblogic Domain to exist both Managed server for ADF 11g and Managed servers for Forms 11g and Reports 11g?
How to install on one Weblogic server these two things? Is it possible and what is recommended in this case?
Thnx in advance!Hi Rade,
Yes, i think it is possible. In my case I have one Weblogic Server Domain with 3 Managed Server,one for deploy application and the others are the Forms & Reports 11g.
For that you have to install Fusion Middlware 11g.
For ADF 11g i think you have to install Oracle Fusion Application.
Edit:
Please read the note: Installing ADF 11.1.1.3 Runtime into WebLogic 11gR1 Patchset 2 (10.3.3) [ID 1094153.1]
Hope this help
Regards
Edited by: scapy on 6/Out/2011 3:14 -
Pls hlp: Oracle 8.16 and Forms/Reports 6i Install
I am currently running Oracle 8.16 on WIN2K w/o any problems. I want to install Forms and Reports 6i on same machine. Pls tell me how to correctly install Forms and Reports 6i and allow me to use current database in Oracle 8.16..
Just wondering if you were successful installing the REPORTS. I have to do the same thing. Any lead how to go about this?
THanks. -
Forms & reports 6i installation problem On linux
Following is the error i got while installing the product in Oracle home. The Oracle HOme already has Oracle Server 8.1.6. I am just installing Developer6i along with Oracle Server 8.1.6. The Installer Analyzes the dependencies and then gives this error.
'rdbms' software is not available in the current distribution source and has not been installed.
You must obtain and install 'rdbms' software from some other source
Note: You may also get this error if the Installer registry file has been overwritten
Thanks in Advance.
nullexport TNS_NAMES=$ORACLE_HOME/network/admin
export TWO_TASK=(your db service name) -
Forms & reports 6i installation problem On Solaris 5.8
Following is the error i got while installing the product in Oracle home. The Oracle HOme already has Oracle Server 8.1.6. I am just installing Developer6i along with Oracle Server 8.1.6. The Installer Analyzes the dependencies and then gives this error.
'rdbms' software is not available in the current distribution source and has not been installed.
You must obtain and install 'rdbms' software from some other source
Note: You may also get this error if the Installer registry file has been overwritten
Thanks in Advance.<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Johnnie Ng ([email protected]):
I got this error also<HR></BLOCKQUOTE>
Is there anybody who could help us on this problem. I am trying several possiblities but i couldn't come thru John. I'm just waiting for an answer.
null
Maybe you are looking for
-
Mac suddenly became very slow on OS-X
Problem description: Machine became suddenly very slow only on OS-X. Checked with Linux and works ok. Detailed description: On December 31th machine begun to behave abnormally slow. Long waits between keystrokes and the character appearance on the s
-
Can I copy an entire event into a project?
This is day 2 with my new iMac after starting with Apple II 30 years ago and working with MS products for 25 years, so go easy on me. I have a Canon HV20 HD Camcorder (DV tape-based) and it imports easily into iMovie 08. Of course, if I have an hour
-
How can I change the settings on my iPhone 5 so that I get new emails automatically? Without having to open the mail app. Thanks!
-
Alert "Stack Overflow with Line at 2" if i calculate Total at onchange.
Hi Friend, i am using java Script to Multiply Two Column and Total Come In to P1_total Item On onchange Action. Now Problem is when i enter Rate Value Into :p1_rate and Qty Into :p1_qty Item and press TAB when My Cursor is in P1_qty Item then value i
-
Hi guys, I was told to open a .chm file but my mac asks me what program to use. Ive never heard of a .chm file before. What is it? What program should I use? This may be the wrong section to ask so please tell me where to ask if you know. Thanks, Jon