SSO Application Configuration .msc - Unable to load mmc and unable to uninstall/repair

This tool was installed on a QA server by an ex-employee and nobody knows for sure if it ever worked.  Attempting to uninstall/repair fails with below errors in the event log.
The description for Event ID 11001 from source MsiInstaller cannot be found. Either the component that raises this event is not installed on your local computer
or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Product: SSO Application Configuration -- Error 1001. Error 1001. Company Name is a required field.
(NULL)
(NULL)
(NULL)
(NULL)
The description for Event ID 11001 from source MsiInstaller cannot be found. Either the component that raises this event is not installed on your local computer
or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Product: SSO Application Configuration -- Error 1001. Error 1001. An exception occurred while uninstalling. This exception will be ignored and the uninstall will
continue. However, the application might not be fully uninstalled after the uninstall is complete. -->
Cannot delete a subkey tree because the subkey does not exist.
(NULL)
(NULL)
(NULL)
(NULL)
The tool is currently unusable.  And worse, we cannot uninstall and re-install this tool.  Please advise.

Hi,
Sadly i had the same issue trying to uninstall the SSO App Con...
I also could not repair the install due to another 1001 error.
Instead of uninstalling the program i found the registry file i needed to repair the install and imported it to my registry.
1 Open notepad and paste the following
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}]
"UseCustomHelp"=dword:00000000
"Type"="Microsoft.ManagementConsole.Samples.ActionsSnapIn, SSOMMCSnapIn, Version=1.5.0.0, Culture=neutral, PublicKeyToken=null"
"ApplicationBase"="C:\\Program Files (x86)\\Microsoft Services\\SSO Application Configuration"
"ConfigurationFile"="SSOMMCSnapIn.dll.config"
"NameString"="SSO Application Configuration"
"Description"="Allows a BizTalk Administrator to Configure the SSO Configuration Store"
"Provider"="Microsoft"
"ModuleName"="SSOMMCSnapIn.dll"
"AssemblyName"="SSOMMCSnapIn"
"RuntimeVersion"="v2.0.50727"
"FxVersion"="3.0.0.0"
"About"="{00000000-0000-0000-0000-000000000000}"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}\NodeTypes]
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\MMC\SnapIns\FX:{ce255ef6-9e3d-42c8-b725-95ccc761b9d9}\Standalone]
2 Save file as .reg
3 Open regedit.exe and import the saved <filename.reg> 
This should allow you to use the SSO App Conf.. again.
I hope this helped.

Similar Messages

  • Adobe Activation error I bought a used CS2 application with serial numbers: it loads fine and works, but I cannot activate it and it will run out in 26 days. I bought it on ebat for 40 dollars. I am willing to pay a royalty fee. In 2006, or so, I bought a

    Adobe Activation error I bought a used CS2 application with serial numbers: it loads fine and works, but I cannot activate it and it will run out in 26 days. I bought it on ebat for 40 dollars. I am willing to pay a royalty fee. In 2006, or so, I bought a student version of CS2 at the College bookstore legally and registered it and it is still running on my 2002 eMac, but my Mac cannot communicate with my wireless printer I just got. So I looked for a copy of CS2 to put on my second hand IBM PC.

    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

  • Unable to read burned dvd, unable to format dvd, and unable to burn dvd

    Unable to read burned dvd, unable to format dvd, and unable to burn dvd with my HP G62-339WM Notebook PCI have been unable to perform the Windows back up for months without using new discs. But even after using new discs Windows backup tells me that the disc that I previously used that it is asking to insert is not formatted. I also have not been able to read any dvds that I previously burned, instead it will sometimes recognize them as blank and they are not.  I also cannot perform a format on new dvd discs nor burn to them. I have been able to read some previously burned discs on another pc but not the discs that were created with Windows backup. I have tried everything. I have uninstalled the device, ran the fix it, tried troubleshooting, checked the registry and could not find the upper and lower filters listed. I am however able to read program software and the autorun pops up. Once in a while the autorun will pop up when a blank disc is inserted but then that is all the further I am able to use it. I don't know what else to do. I really want to be able to at least burn files to back up so that they are not lost forever. Please help!

    Fixed it myself - for some reason the La Cie refused to read the media. Had to use another machine to pull the data from the drive, copy it over the network to my iMac and then mount the ISO image.

  • Unable to load network list, unable to load network list

    after Iphone went inyo shop for unlock sim pin, (the kids played with it) it seemed to work
    but home found out trhat there is no signal showing
    it gives message unable to load network list

    Hi there,
    I had kind of the same thing where i would arrive abroad or back in the UK after being abroad and my iPhone would take 20-30 minutes to get a signal and when loading up network selection would always get unable to display message.
    Had phone replaced by apple and the issue hasnt occured in the once ive been abroad since - connected pretty much straight away.
    Just wondering if you are having the issue of delayed text messages where people text you and sometimes it takes 30mins-few hours to get delivered to your phone. Or the issue of people sometimes call you and you good signal and it goes straight to voicemail??

  • Mac does not boot past white loading screen and disk cannot be repaired?

    So when I turn on my Macbook Pro and it does not boot past a white screen with the Apple logo, loading wheel and progress bar. When the progress bar completes, the Macbook shuts down and when I open it again the cycle is repeated. I have opened it in Safe mode and it still showed the same thing. So I opened it in Recovery Mode and had Disk Utility verify and repair Macintosh HD. As it turns out, Disk Utility said Macintosh HD is beyond repair and I need to back up my files and reformat the whole Mac. Unfortunately, I have never used Time Machine since I started using the Mac and I obviously cannot use it now since startup does not even get past the white screen.
    How do I reformat the Mac when it does not even go beyond the white screen during startup? My Mac did not come with any recovery or installation disks. Are my unbacked up files gone for good?
    Thanks.

    PochAstudille wrote:
    How do I reformat the Mac when it does not even go beyond the white screen during startup? My Mac did not come with any recovery or installation disks. Are my unbacked up files gone for good?
    Since you are able to get into Recovery Mode (Command+R), you can erase/format your Mac via Disk Utility.
    Your files/data might be OK. One way to get your data off since you have no back up would be to have another Mac and connect the two via a Thunderbolt cable or even an ethernet cable (I think), then restart your 'bad' Mac into Target Mode by restarting and pressing the T key. Then go onto the 'good' Mac and see if you can copy the data files you want over to it.

  • Unable to load class and instantiate

    Hi All,
    I have a java class B in a jar file which is in tomcat's lib directory. I am trying to instantiate class B from class A which is in the same jar file. But I am unable to create an instance of class B and the control in the program simply advance to the next line and there is no error printed in tomcat log files.
    Can anyone please tell me what am I missing here ... why class A is getting loaded correctly whereas class B is not loaded by tomcat ?
    Thanks & Regards,
    Kumar.

    Hi.
    Are you sure classes A and B compile correctly into the jar?
    Are you sure that class A is really loaded?
    Can you give some more information?
    Nimo.

  • I keep receiving Unable to load page and have gone through everything this site says to do, other ideas

    This just started mid-day, working fine one moment, and know i can't open pages. IE seems to be working fine.
    == URL of affected sites ==
    http://
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SV1; GTB0.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C)

    "Save Link as" in Firefox is the same as "Save Target" IE and will save the file to a folder on your computer.
    See also: Firefox (or Tools) > Options > General

  • Extension Manager CS6 hangs on "Loading Extensions" and I cannot uninstall it.

    Hello,
    I've been having trouble with extension manager cs6 for about two days now, trying to apply patches to it to make it run more smoothly and stop hanging on "Loading Extensions". I have looked through these forums and they suggested that I remove all mxi files from a subfolder called "EM Store", but I cannot find a EM store under the proper location. I also cannot uninstall extension manager from my control panel, as it does not show up. I am just trying to get keyframe caddy for Adobe Flash, but I cannot get it without extension manager which is a giant pain. I've seen other people post both of their log files, but I think that just makes these forums impossible to find any real answers, as the majority of it is the log file. Please help asap, as I need this project that I am doing to be done fairly quickly.
    Short story:
    1. Manager hangs at "Loading Extensions"
    2. Tried patching with updates, did not work
    3. Tried finding the two subfolders, cannot find them at all in proper location
    4. Cannot uninstall it from control panel
    5. Need Help asap

    You should delete EM Store and Database, then try again, you can find these folders under following path:
    Current Machine's Extension Manager CS6 folder: C:\ProgramData\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
    Current user's Extension Manager CS6 folder:  C:\Users\<your_user_name>\AppData\Roaming\Adobe\Extension Manager CS6, under this path you should remove "EM Store", "Mxi Flag" and "Configuration" folder.
    For the 'AppData' is a hidden folder, you could follow this guider (http://www.bleepingcomputer.com/tutorials/show-hidden-files-in-windows-7/) to unhidden it

  • When emailing I get two messages Unable to initalize Applet and Unable to get HTML message.

    When writing the message these two messages pop up in error windows making it unable to type the message.

    ok---I stopped the sync process of photos and now everything else syncs but still cannot eject my ipod.  Will try other tips on this website.  Thank you

  • Why am I both unable to open Firefox and unable to uninstall it? I used Firefox regularly until today, but this morning I did a System Restore and other troubleshooting and now Firefox is completely unavailable to me.

    I've been having lots of problems with my computer abruptly shutting down lately. This problem '''''might''''' be solved -- it's too early to tell.
    When I try to uninstall Firefox, it beeps like Windows is going to uninstall it, then nothing. I close out the Window, then search for it to see if it's gone. It's still there.
    I like Firefox, but now I'm forced to use IE. How can I get Firefox back? I don't want to download it until I've uninstalled what's on here now.

    First, please try reinstalling Firefox over your current installation. There is very little risk of making things any worse than the system restore function has already done.
    http://kb.mozillazine.org/Uninstalling_Firefox#On_Windows

  • Two error messages appear in my e-mail "unable to initialize applet" and "unable to get HTML message"

    These appear after I have written a message in the body of my e-mail and prevent me from sending. The body of the message goes blank.
    I have contacted my server and they say it lies within Firefox. I went to "tools" and then to "error console" but it was blank.

    What email client or email service are you using?

  • The incoming mail server box on my iMac is blank so unable to get mail and UNABLE to trype the mail server into the box it refuses to accept anything in itplease help

    Im having lots of bother with my Mac Mail I cant recieve or send it . On checking I noticed the incoming mail server box in my Account is blank and it refuses to let me type anything in it so stays blank .  what can i do? help please.

    Could I ask you to amend your signature - you can see why it's a good idea.
    The first step for you would be to sign out in System Preferences>iCloud then sign back in again, enabling Mail and any other data types in the checklist there. This should set up Mail automatically for you - you shouldn't need to enter any settings yourself.
    Your data will disappear from your Mac when you sign out, but will reappear when you sign back in.

  • Xcelsius error: Unable to load URL while using QAAWS on XI 3.0.

    Hi Experts,
    I am getting "unable to load url" in xcelsius 2008 while importing a qaaws url.
    After all the testing below are my observations:-
    1) This has something to do with QAAWS.
    2) When I logged into QAAWS and tried accessing the newly created url from the browser. It gave this error " can not communicate to the server mcc69u01:6400" but intrestingly the cms port is located at 6464 and not 6400.
    3) For every other application like infoview and cmc it picks the correct port i.e. 6464.
    4) Server is present on a UNIX box.
    5) I read somewhere that I need to make changes in the dsws.properties file under war files folder. There I enetered "domain= mcc69u01:6464" and restarted TOMCAT.
    6) After making this change I was unable to even log into QAAWS as it gave the error 02718 " you are not authorized to create query".
    7) After reverting the changes now I am able to log into QAAWS and create new queries but the same problem persist.
    8) TOMCAT is listening to port 8088 for our environment.
    9) Tried the same thing from a different client machine with fairly new BO XI 3.0 client installation(same server) but no success.
    I believe somehow QAAWS is not able to connect to the correct port 6464 and that is the reason for this issue.
    Could anyone suggest what I should do???
    Thanks in anticipation,
    Anshul

    hi Anshul,
    The QAAWSservletprincipal is not related to how you log into the server when creating queries
    It is used when the queries are actually running, or when you are trying to load the query to a tool like Xcelsius. I had the same unable to load error and it was caused by the QAAWSservletprincipal being set to concurrent licence when my server was all named users.
    I think the issue you are seeing is more likely a bug caused by hardcoded cms port, but I think it is worth ruling out.
    Regards
    Alan

  • ProjectCenter Webpart on another Site Collection "This Web Part was unable to load"

    Hi,
    Project Server 2013 on an url like http://domain.tld/pwa
    Trying to use the Project Center Web Part from another site collection, let's say http://domain.tld/sites/siteA
    I get the "This Web Part was unable to load" error and in the ULS I get Object Reference not set to an instance of an object classic error
    What am i doing wrong?
    Thanks!

    Thank you for the thoughts Michael but none of those worked for me.    
    What I have done so far is I have added the PWA features to the site which is what has made it work when logged in under the farm account.  
    So I have 3 account I am testing with
    1.) regular account with read only permissions to the Publishing page
    2.) Admin account that is in a group that is a site administrator to ALL sites
    3.) Farm account
    Currently it works for the Farm account and the Admin account but not the regular account.  I have added the regular account to the same group as the Admin account and will test when the change updates to see if I can access the information.  This
    will at least let me know that it is a Permissions issue which is what I think it is I just cant figure out which permission it would need to be. 

  • Runtime error and unable to create new web application

    Hi
    when i create new web application i faced this error Runtime error and unable to create new web application.
    in this farm we have
    2 wfe servers
    2 application servers.
    adil

    Adil,
    There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
    you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
    You can refer few similar threads here -
    Link
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Maybe you are looking for

  • Applying a patch on UNIX (HP 9000 )

    i have a patch in the ".zip" format. how do i apply it on the HP-9000 UNIX server. thanks

  • Safari--open in new page--pop under?

    Is there a Safari preference setting that causes new pages to load under the one currently being read instead of on top? I like the sort-of tabbed browsing, but most often, I want to read the linked page only after I've finished the page I started wi

  • Account cannot be directly posted

    Dear Expert, Running the  FAGL_FC_TRANSLATION program and upon running the program it has an error due to trying to post to reconciliation accounts. Assets & AP. Do you know if their is a area to configure? Regards Tom

  • S/MIME Attachment

    I have a question regarding signed E-Mails. When I send a signed E-Mail with my iPhone 6 (iOS 8.1.2) I can see an attachment in the E-Mail on my Outlook Client (sent mail folder). When I send a signed E-Mail with my Outlook client there is no attachm

  • Where do I get a verification code?

    Where do I get a verification code?