SSO between WebDynpro and Servlet on the same machine

Hi,
I have an WebDynpro application running in our portal which makes some calls using RFC to a backend system. The RFC connection is obtained using DestinationService and SAP Logon Ticket is used for authentication.
This app should call a servlet on the same instance which also uses RFC to get some data from the backend.
Now, wenn I call the servlet from the WebDynpro, the exception java.lang.IllegalStateException: No SAP logon ticket found comes up. Does anyone have an idea how to configure the servlet-webapp to accept logon tickets?
Thanks in advance
Thorsten

this must mean that your windows drive is formatted NTFS. NTFS drives are not natively writable from OS X (only readable). However, you can install Macfuse and [NTFS-3g|http://macntfs-3g.blogspot.com> (both are free) to make them writable.

Similar Messages

  • Communication between Two WebLogic instances on the same machine

    Hi,
    We're having a problem with communication between two copies of Weblogic on
    the same machine. They are configured with seperate ports (regular and SSL).
    Independantly, they run fine. I can access EJBs running on either of them.
    The problem is that a bean in one of them has code which attempts to access
    an EJB on the other one. The procude fails when trying to obtain the initial
    context. This same code works if compilied independantly of WebLogic on the
    same machine.
    Are there any known issues regards communication between two running
    instances of Weblogic on the same machine?
    Thanks in advance,
    Randy Yarger
    marchFIRST
    [email protected]

    Thanks for the prompt reply.
    There is one IP address (internal address 10.227.1.34) one the machine. WLS1
    is set up at ports 7001 and 5133. WLS2 is setup at ports 7004 and 7005.
    When WLS1 attempts to obtain a context to WLS2 with the URL
    t3://10.227.1.34:7004/ it pauses for a long period of time. Running truss
    on the both WLS processes shows communication occuring between the two
    followed by long periods of silence. Finally WLS2 spits out the error
    ConnectionException[7001,7001,5133,5133,7001,7001] (paraphrased, I can get
    the entire error if it would help).
    After another long pause, WLS1 quits trying with the error 'Server
    10.227.1.34:7004 not found' (again paraphrased).
    Among the things we've tried:
    * Changing the URL from the IP to 127.0.0.1
    * Enabling/disabling SSL on either or both WLSs.
    * Changing the server name in WLS2's copy of weblogic.properties from
    'myserver' to 'myserver2' (previously they were both 'myserver')
    * Upgrading WLS2 to 5.1.0sp5 (Tried upgrading WLS1, but was getting class
    not found errors and quit because that WLS is being used by other people)
    This is a Solaris server. WLS1 is running 5.1.0 and WLS2 is running 5.1.0sp5
    Any suggestions would be appreciated.
    Best,
    Randy Yarger
    marchFIRST
    [email protected]
    "Michael Girdley" <[email protected]> wrote in message
    news:[email protected]...
    >
    >
    There should not be. What is your network configuration? Are they on
    separate IP addresses?
    Thanks,
    Michael
    Michael Girdley
    BEA Systems Inc
    "Randy Jay Yarger" <[email protected]> wrote in message
    news:[email protected]...
    Hi,
    We're having a problem with communication between two copies of Weblogicon
    the same machine. They are configured with seperate ports (regular andSSL).
    Independantly, they run fine. I can access EJBs running on either of
    them.
    The problem is that a bean in one of them has code which attempts toaccess
    an EJB on the other one. The procude fails when trying to obtain theinitial
    context. This same code works if compilied independantly of WebLogic onthe
    same machine.
    Are there any known issues regards communication between two running
    instances of Weblogic on the same machine?
    Thanks in advance,
    Randy Yarger
    marchFIRST
    [email protected]

  • Designer 6i and 10g on the same machine?

    I have Designer 6i and corresponding repository on my machine.
    The problem with 6i I can't save diagramm in HTML format
    I believe I can save in HTML format in 10g or other?
    Can I install on the same machine 10g designer?
    should I configure new repository?
    TIA

    See my update on your earlier question.
    As for running 6i and 10g on the same machine, yes you can do it. You just have to install them in separate Oracle Homes, and be careful when you tell them which version of EXP and IMP to use. There is one MAJOR caveat, however. They cannot use the same Designer Repository - 6i client won't talk to a 10g repository and 10g client won't talk to a 6i repository. You can upgrade a 6i repository to 10g with the RAU, but take a backup before you do - the only way to go back is to restore your backup. Besides, I think that if you upgrade to the last supported version of Designer 6i (you should be able to get it from MetaLink) you will get the Publish Diagrams utility.
    Frankly, my opinion is that there is only one reason to stay on 6i - if you need to generate and support 6i client/server Oracle Forms. If you don't use Oracle Forms, or if you have moved on to Web Forms with the middle tier Forms Server, I'd recommend an upgrade to Designer 10g and Developer 10g.

  • CS3 Bridge and CS4 on the same machine.

    Hello Everyone,
    I have adobe photoshop CS3 and Illustrator CS4 on my machine.  Any known issues for running bridge CS3 and CS4 on the same machine?  Some experts at telling me not to use Photoshop CS3 with Bridge CS4, just wondering.  Thanks for you replies.

    Bridge is not really a stand alone product, and tuned to work with its current version of PS.  Also, Bridge CS4 has some features changed and/or added.  So if using CS3 Bridge you might have aspects that don't work with PS CS4.
    I would keep CS3 on the machine if you don't need the HD space, until you feel you no longer need the older version.  But use them as a pair as intended.  Also, only have one Bridge running at a time.
    I did not upgrade to CS4, but from what I have read I see no reason to use Bridge CS3 as the upgrade is faster, less prone to crashes, and has added features.
    CS4 PS on the other hand can be tricky if you don't have a newer computer with a good video card.

  • What is the best way to have access to OSX and OS9 from the same machine?

    What is the best way to have access to OSX and OS9 from the same machine?
    Do I need to partition the hard drive? Installed both Tiger and OS 9 on the G5 and it is having problems starting up properly.
    G5   Mac OS X (10.4)  

    And here is the prove for Edwin's message: Macintosh: Some Computers Only Start Up in Mac OS X

  • Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

    I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished.  For the moment I just need some "high level" guidance, little details can be worked out once I know
    which direction I will go.  I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time.  DFS can stay installed for maybe
    future purposes but clearly I wouldn't need the DFS Replication with only one machine.
    Here's a few details of the environment....
    1.  DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present.  But likely they will be gone and the DFL elevated before I start on the File Server project
    2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server.  Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
    and maybe the same IP if not too much trouble.  This way the existing shortcut would continue to work with the new 2012R2 File Server.  The UNC path represented in that shortcut is also configured into one or more of our major business applications,
    futher emphasizing the need to keep the UNC path the same throughout the process.
    3. The facility runs 24/7/365 but is "light" on weekends.  The political environment is such that there is little to no tolerance for any down time at all.
    4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
    Thanks for any suggestions.
    Phillip Windell

    Hi Sharon,
    I've done some more reading and have a few new ideas to run past you....
    Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
    to flip over to the new server.  DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
    the old server to 2003R2 first.  As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
    Thanks for the reg info on the Shares.  I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job.  I'll probably export that Key as a
    safety move whether I use it or not.
    Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
    1. Remove the DFS Replication Object (optionally remove DFS Services completely)
    2. Rename the old File Server to something else and set it to DHCP
    3. Rename the new File Server to the name I want to use and give it the IP the old server had.
    How does that sound?
    Phillip Windell

  • Is it possible to run VLM and lmtools on the same machine

    hi together ... is it possible to run VLM and lmtools on the same machine without any problems?
    the running system will be Windows Server 2008 R2 x64! maybe we will install the license server on the virtual server.

    Hi SvenNittmann,
    in general, it should be possible to run both tools (VLM and lmtools for FlexNet) on the same machine. But I wouldn't recommend you this way, because NI VLM is also build on top of FlexNet and sometimes you will receive ugly problems with the installation of both tools on the same PC. It is possible to use VLM in a virtual machine without any problems or restrictions. NI provides information about the usage of VLM in a virtual machine, like you can see here:
    Volume License Manager on a Virtual Machine - National Instruments
    http://digital.ni.com/public.nsf/allkb/5730FDDC97F9157E8625755F00749CFF?OpenDocument
    I also use VLM in a virtual machine and I could recommend you the same solution.
    Regards, Stephan

  • Can i run 9ias versions 1 and 2 on the same machine

    i need to install 9ias versions 1 and 2 on the same machine but in separate databases, is this possible? if it is possible are there any issues that i need to be aware of?

    You can install the portable Firefox 3.6.x version to access websites that do not work with Firefox 5+.
    *http://portableapps.com/apps/internet/firefox_portable#legacy
    *http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html

  • Why can't I translate between Swedish and Polish in the same Word document. This means I want to switch between two keyboards.

    Why can't I get a Polish keyboard easily accessible from within my Word program? I have to choose it in Finder and then I can't switch back and forth between English/Swedish and Polish in the same Word document. Surely there must be a simple way of doing this by means of keyboard commands while I write, or do I have to go back to my old PC for that?
    Ulf Magnusson

    (1) You are talking about switching keyboard layouts, not about translating from Swedish to Polish or viceversa.
    (2) The keyboard layout choice is not a function of the application (MS Word) in either Mac OS X or Windows; it is a system choice.
    (3) Read
    <http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp2214.html>
    specifically "Input source list" and "Input source shortcuts".
    In short, you choose the three keylayouts you wish to use for English, Polish, and Swedish, respectively, and then you set the shortcuts you prefer to use to switch between them.
    And it's all there, in the Help files, on your very own computer…

  • How to install iFS and iAS on the same machine?

    I have successfully installed iFS on a Windows NT 4 machine. Now, I would like to install iAS Enterprise Edition on the same machine. The installation guide for iAS says that I should first deinstall all products from the default ORACLE_HOME. I have not found a clue as to what to do if I want to keep the software already installed.
    Would it work if I tried (after installing iAS) re-install iFS using different ORACLE_HOME directory?
    Is there a white paper or any other document that would clear up the issues involved in installing Oracle products in ORACLE_HOME?
    Thanks a lot,
    Marek

    You can install IAS on the same machine that Oracle and IFS are on. Install IAS into a new Oracle Home (i.e. D:\IAS).
    This worked for me.
    I am still waiting to hear how (look for my post about 20 below yours) how to configure IFS to use the Apache Web Server that is part of IAS.
    Good Luck.
    Maybe one of these days Oracle will create an IAS discussion forum. This is my third request and I haven't heard anything back from them yet.
    null

  • Developer 1.6, 2.1 and 6i on the same machine does not work

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

    I have installed the three versions on the same machine against Oracle 7.3.4 in another node. Each one is installed in a different OracleHome. Version 2.1 and 6i works fine but when I run Forms 1.6 I get a message telling me that it cannot find the fmcus.msb.
    Is trying to find it in the path of the Developer 2.1 and of course it does not work.
    The Oracle Home selector only shows me those corresponding to 2.1 and 6i.
    It is possible some workaround even if running one version at a time.
    Thanks.

  • Web service and servlets in the same project...web.xml?

    Hello, I have a problem with my web service.
    I have a server, which displays a web service. I programmed this service with JAXRPC.
    I have a client, in another directory. I succeded in compiling, deploying and running the web service.
    The problem is that after I tried to integrate this service in an existing project. This project contains servlets. In these servlets, I'm using sessions.
    These servlets are on the same side as the server of the web service. Because of the implementation of my code, I'd like to use in the class that represents the server of the service, the same session as the one I'm using in the servlets.
    But of course, it's not working by itself. I know there's something to do with the web.xml files.
    The thing is that I created a web.xml file for the service, and another for the servlets.
    I was thinking of joining both of them in one xml file, but everything crashes then...
    Could someone tell me how to create a project with a web service and servlets, and mostly how to configure the xml file??
    Thanks for any help
    Philippe

    Hello, I have a problem with my web service.
    I have a server, which displays a web service. I programmed this service with JAXRPC.
    I have a client, in another directory. I succeded in compiling, deploying and running the web service.
    The problem is that after I tried to integrate this service in an existing project. This project contains servlets. In these servlets, I'm using sessions.
    These servlets are on the same side as the server of the web service. Because of the implementation of my code, I'd like to use in the class that represents the server of the service, the same session as the one I'm using in the servlets.
    But of course, it's not working by itself. I know there's something to do with the web.xml files.
    The thing is that I created a web.xml file for the service, and another for the servlets.
    I was thinking of joining both of them in one xml file, but everything crashes then...
    Could someone tell me how to create a project with a web service and servlets, and mostly how to configure the xml file??
    Thanks for any help
    Philippe

  • Is it possible to use Facetime between Mac and iPad with the same Apple ID?

    Hello,
    I have a MacBook Pro and an iPad. May MacBook is used by my wife and me at home. I take the Pad with me when I travel. On the MacBook I have and Apple ID registered. It is the same I use with the iPad. Do I need a differnt ID for my wife if we want to use Facetime? Or do I need to create a seperate user-profile for my wife on the MacBook?
    Thanks for your feedback in advance.

    Hi
    I use the same apple id for the same thing when i travel between myself and people at home over my iphone and the ipad i leave at home always seems to work of for me
    I normally just give it a little test before i leave each time by signing in of both devices and trying ringing myself
    Hope this helps

  • Synced times in ical between iphone and Macbook not the same

    I have tried syncing my ical to my iphone using itunes and the times on my iphone are not the same as my ical. for example 1.30 pm for an appointment in my ical reads as 4.00am and the next day on my iphone calendar. How do I fix this?

    Are both the iPhone and your Mac set to the same (local) time zone? Do you have Time Zone support turned on in iCal Preferences and in iPhone > Settings > Mail, Contacts, Calendar?

  • TS2972 I have the ID between computer and apple TV the same, I've changed the pasword and still cannot get the two to share. They stopped sharing a week ago. Best to simply unplug and start again?

    Does anybody know why my home sharing would stop and I cannot get the Apple TV to recognise the ID or possibly the password? Nothing was changed and it stopped. Now I've done everything including new apple ID and password but it still wont connect.

    Either the most recent updates to iTunes or the Apple TV have changed connectivity to one another. Review the following link as the configuration presented may not be the same as yours but the concepts are the same. Once completed, you will have connectivity back.
    Solution for Apple TV 2, Xfinity router, Ethernet connection and Home Sharing

Maybe you are looking for