Sso configuration in portal to share point portal

Hi,
Can you please provide me the steps to configure sso in portal to share point portal.
my requirement is to create an iview that displays the shrepoint portal home page without asking user credentials.
pls suggest UPID and logon tkt methods.
Thanks in advance.
Regards,
Sai Battula.

Hi ,
You can opt for SAML.
Configuration from BASIS & Portal Side.
[Setup SAML 1.1-based Web SSO from NetWeaver CE to non-SAP systems ]
Configuration from Share Point side.
[http://technet.microsoft.com/en-us/library/ff607753.aspx]
Also you can check out the third party tool u201C btexx MOSS Integratoru201D .
[http://www.btexx.com/products/btexx-collaborationmanager/MOSS-WSS]
[http://www.btexx.com/products/btexx-collaborationmanager/video]
Regards
Sahil Kohli

Similar Messages

SSO issue in portal and BW report resources

Hi
I have a BW reports displayed in portal. user mapping is configured in such a way thta multiple users in portal are mapped with single user of BW system.
When BW report is displayed on portal, some of resources ( like images and js files as i see in http watch) are not fetched with reports and for those we need to login again as BW user.
i checked SSO configuration between portal and BW, it seems to be correct as data is displayed in BW report.
could you please suggest the solution of getting it fixed?
Thanks in advance
Pranav

Hi,
The problem is in the BEx Web configuration.
Check whether the the Mime repository has the images or not in BI 7 server.
If Mime has the images then the BI and portal configuration is not done properly using the BI template installer.
You need to set the set the BWMANDT in table RSADMINA to current used default client.
Also try to set the BEx web,
The problem might get resolved after setting BEx Web.
Required Steps
You can perform an initial check of the automatic configuration with the
following steps:
Note 917950 - SAP NetWeaver 2004s: Setting Up BEx Web
1. Execute the report RSPOR_SETUP with transaction SE38 (or SA38; or you
can execute the report from the SAP Reference IMG, see Documentation
below)
2. Use value help of entry field Program ID (or RFC Destination) to
choose <BI_SID>_<J2EE_HOSTNAME>_<J2EE_SID> as RFC Destination (this
destination is created by the Template Installer)
3. Enter Portal SID (required to check step 10)
4. Press button Execute
Placeholder <BI_SID> correspond to the field BACKEND_SID of the Template
Installer's Data Entry. <J2EE_HOSTNAME> correspond to the field J2EE HOST
and <J2EE_SID> to J2EE SID.

SSO Configuration in the Portal - Configtool screen greyed out

Hi,
I am trying to setup SSO to our AD server in our portal system.
However, when I go into the config tool to change the settings in the UME LDAP Tab - the screen is greyed out and I cannot change anything.
Anyone know how I can modify this screen?
Dave

Hi ,
You can opt for SAML.
Configuration from BASIS & Portal Side.
[Setup SAML 1.1-based Web SSO from NetWeaver CE to non-SAP systems ]
Configuration from Share Point side.
[http://technet.microsoft.com/en-us/library/ff607753.aspx]
Also you can check out the third party tool u201C btexx MOSS Integratoru201D .
[http://www.btexx.com/products/btexx-collaborationmanager/MOSS-WSS]
[http://www.btexx.com/products/btexx-collaborationmanager/video]
Regards
Sahil Kohli

Use of KM services and TREX Search Engine From share point portal

Hi All,
We would like to Use of KM services and TREX Search Engine From share point portal.
For this purpose we interoperability between windows sharepoint and SAP Portal.
Please provide necessary documents or suggestions for interoperability for above requirement.
mail id : <b>[email protected]</b>
Thanks in advance
Regards
Swarna B

Hi,
See this this links:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e891378-0601-0010-5386-a3387f1b161b
Regards,
Senthil K.

Please help : "Configuring Windows SSO for Sun portal server 7.1"

Hello friends,
I have a problem when create Single Sign On ( SSO ) on the portal server 7.0
If you have configured successfully.Please give me the way you have used.
Thank you very much.
DungT
Related document and information :
http://docs.sun.com/app/docs/doc/819-4670/6n6qardtu?a=view#gbaqc
http://forum.java.sun.com/thread.jspa?threadID=5140689&messageID=9519196
Edited by: dungtran on Mar 13, 2008 4:35 AM

There is a ZIP Install available for Windows that bundles the Access Manager, Directory Server,and Portal Server in a pre-configured deployment. Try this download instead:
PS 7.1u1
[https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_us/-/USD/ViewProductDetail-Start?ProductRef=PortalSvr7.1U1-OTH-G-F@CDS-CDS_SMI]
PS 7.2
[https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=PortalSvr7.2-OTH-G-F@CDS-CDS_SMI]
- Jim

Microsoft Share Point Inyegration with Portal 7.0

Hi All,
I am in a situation where i need to integrate Microsoft Share point with EP 7.0. Can any one guide me on this with the steps. Any links ,blogs or documents are appriciated.
Thanks
Ravi

Mr Sunkara,
As the need for the integration of collaboration tools into the NetWeaver Enterprise Portal has grown extremely during the past years, there have been several attempts to introduce generic solutions for the integration of the Microsoft SharePoint (MOSS) into EP 7.0.
You will be happy to hear that there is a solution named SmartMOSS on the market, that has proven to be a solid but deep integration with the MOSS and the EP. Please find further informations [on the product website|http://ho2-gmbh.de/produkte/smartmoss].
In case you do not aim for a generic solution I may still be able to advise you in this matter, because I have been heavily involved with the development MOSS integrations in the past.
If you have any further questions or are interested in detailed informations please do not hesitate to contact me.
Best regards,
Jan Marquardt

Share Point redirects my "sites" link on the O365 Portal main page - help!

Can anyone tell me how to fix an inadvertent redirect?
When I login to my O365 Portal, I am at my main page with the various tiles for Calendar, Tasks, Admin, Sites, OneDrive, etc. When I click on the "sites" tile, Share Point redirects to my "OneDrive for Business" page.
How do I get it back to the "out of the box" default, so that when I click on the "sites" tile, I end up at my Team Site page?

Hi Archid,
Per my knowledge, when we click the Sites tile, it will redirect us to the page with the sites that we are following
https://xxxxx/personal/xxxx/Social/Sites.aspx.
I recommend to right click the Sites tile and then select the Properties to see the URL of the tile.
In general, the URL of the Sites tile should be
https://xxxxx/_layouts/15/MySite.aspx?MySiteRedirect=AllSites. Please check if the URL of the Sites tile is right.
If it is the correct URL, I recommend to type the URL in the browser directly and then check the results.
In the meanwhile, you can post your question to the forum for Office 365: http://community.office365.com/en-us/f/default.aspx.
More experts will assist you, then you will get more information relation to SharePoint Online.
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to Configure Multiple Portal Middle Tiers with a Load Balancing Router

Hi,
Portal version trying to install 10.1.2 on Windows 2003 boxes.
I am following the guide http://download.oracle.com/docs/cd/B14099_19/portal.1012/b14037/cg_advnc.htm#i1046354. I have InfraStructure installed on a different box and am trying to install 2 Portal Midtiers each on separate boxes and using LBR. The above document is kind of confusing as I am trying to following
5.3.1 Step 1: Install a Single Portal and Wireless Middle Tier (M1)
5.3.2 Step 2: Configure OracleAS Portal on M1 to Be Accessed Through the LBR (AND FOLLOW ARE THE STEPS 1 to 14 in sequence)
if I follow 1 to 14 steps in sequence the information is not consistent what is being listed in the following sections
5.4.1 Create Virtual Hosts
5.4.2 Configure OracleAS Web Cache
5.4.3 Register OracleAS Portal with OracleAS Single Sign-On
i.e.
ptlconfig -dad portal -sso -host www.abc.com -port 7779
ptlconfig -dad portal -sso -host www.xyz.com -port 7779
as in the above steps it says to run
ptlconfig -dad portal -wc -site
and ssoreg command that always fails because I am running it from midtier as it gives error saying invalid username/password
as oppoesed to steps listed in point 8, 9, 10, 11 and 12.
Can someone please privide the steps in sequence I need to follow when installing 2 midtiers with frontend LBR and one infrastructure. I am trying to follow the architecture listed in the above link.
Any help is really appreciated.
Thanks

Hi,
Will appreciate any inputs on the following.
I am planning to install Infrastructure and one Midtier BI Forms Reports Discoverer, Portal on one windows box and the second midtier BI Forms Discoverer, Portal on the second windows box.
Please correct me if I am wrong on installing and configuring the mid-tiers as following are the steps I have compiled going through the document and want to make sure this time I do it right.
As I'll be installing BI Forms Reports Discoverer, Portal so wondering when I install the second midtier do I need to unselect all Portal, Forms, Reports, Discoverer or just the Portal I need to unselect.
Also in the host file of both the windows boxes do I just need to keep the LBR IP Address entry and remove the rest.
LBR:_
Computer Name: bigip5.prd.com
IP Address: *167.123.2.5*
Listen Port: *80*
Invaidation Port: *9401*
Infrastructure:_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7777*
Application Server Control port: *1800*
M1 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal1.prd.com
IP Address: *167.123.2.6*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
M2 (Portal & BI Forms Reports Discoverer):_
Computer Name: portal2.prd.com
IP Address: *167.123.2.7*
Oracle HTTP Server Listening Port: *7778*
OracleAS Web Cache Listening Port: *80*
OracleAS Web Cache Invalidation Port: *9401*
OracleAS Web Cache Administration Port: *9400*
Web Cache Statistics port: *9402*
Application Server Control port: *1810*
First to create MetadataRepository and then Install Infrastructure and then follow the below steps to install Midtiers
Install and Configure of M1 (Portal and BI Forms Reports Discoverer):-_
*5.3.1 Step 1*: Install a Single Portal and BI Forms Reports Discoverer (M1 i.e. portal1.prd.com)
*5.3.2 Step 2*: Configure OracleAS Portal and BI Forms Reports Discoverer on M1 to Be Accessed Through the LBR
*1.* Configure LBR
*2.* Follow Section 5.4.1.1 to create the Virtual Host for bigip5.prd.com (LBR) and portal1.prd.com (M1)
*3.* Define a site that matches the virtual host entry for bigip5.prd.com (LBR) on Webcache of M1
*4.* Use OracleAS Web Cache Manager on M1, to map the site bigip5.prd.com (LBR) to middle tier portal1.prd.com (M1).
Follow steps 5 and 6 as per the document
*7.* Configure bigip5.prd.com (LBR) to accept invalidation requests from the OracleAS Metadata Repository on a separate port i.e. 9401
*8.* Change iasconfig.xml on M1
*9.* run ptlconfig -encrypt
*10.* Register the URL changes with OracleAS Portal by running ptlconfig -dad portal -wc -site
*11.* No need as it is http only
*12.* Run the follwoing
MID_TIER_ORACLE_HOME_M1\sso\bin\ssoreg.bat
-site_name bigip5.prd.com
-mod_osso_url http://bigip5.prd.com:80
-config_mod_osso TRUE
-oracle_home_path MID_TIER_ORACLE_HOME_M1
-config_file MID_TIER_ORACLE_HOME_M1\Apache\Apache\conf\osso\osso.conf
-admin_info cn=orcladmin
-virtualhost
*13.* Edit targets.xml to enable monitoring of the LBR's front-end host and port settings for OracleAS Portal
+<Property NAME="PortalListeningHostPort" VALUE=http://bigip5.prd.com:80/>+ and then run
MID_TIER_ORACLE_HOME_M1\bin\emctl reload
*14.* Test the setup
Install and Configure of M2 (Portal and BI Forms Reports Discoverer):-_
*5.3.4 Step 4*: Install a Single Portal and BI Forms Reports Discoverer (M2 i.e. portal2.prd.com)
*1.* As I am installing on wiondows so will not set IASCONFIG_LOC environment variable as I can just copy the iasconfig.xml file from M1 to M2
*2.* Run OUI on M2
*3.* Clear the selection for OracleAS Portal but don't know if I need to unselect Forms , Reports, Discoverer also.
*4.* Enable OracleAS Portal
*5.3.5 Step 5:* Configure the New Middle Tier (M2) to Run Your Existing Portal
*1.* Create both virtual hosts as done on M1
*2.* Copy dads.conf, oradav.conf, cache.conf, web.xml from M1 to M2
*3.* Re-register mod_osso on M2. To do this, perform the following steps by copying osso.conf from M1 to M2
*4.* Synchronize the DCM by using the following command
MID_TIER_ORACLE_HOME_M2/Apache/Apache/bin/ssotransfer MID_TIER_ORACLE_HOME_M2/Apache/Apache/conf/osso/osso.conf
*5.* Run dcmctl updateConfig
*6.* add the necessary mod_rewrite and mod_oc4j directives to the httpd.conf and mod_oc4j.conf files respectively
*7.* Restart Oracle HTTP Server on M2
*8.* Access the OracleAS Web Cache Manager on M1 and follow steps 9,10,11,12,13,14,15,16 for Webcache seetings and clustering.
Also will appreciate if can get some info on the following:
*1.*
When I configure the Webcache as per the Document but if I bring down one Midtier Instance the requests are not going to the other Instance that is up and ignores the case whether an instance is down. Any idea how what and where do I need to provide any setting which in case of instance is down routes the requests to the one that is up.
*2.*
What exactly happens when it says To enable monitoring of the LBR's front-end host and port settings for OracleAS Portal edit target.xml. Is this for LBR to find if an Instance is down or not and route the requests appropriately.
Thanks again for all the help.

SSO between SAP Portal 7.3 and Ruby on Rails

Hello Everyone,
We are planning to integrate SAP Portal 7.3 and a RoR application and I am wondering If someone can share some experience (If you have any of course) on how to establish SSO between SAP Portal and RoR.
The SAP Portal will act as service provided and RoR as a consumer, we don't have LDAP, so the Portal UME is in ABAP and RoR uses an own UME database. We have SSO between our Portal and SAP Backend systems.
In RoR customers will have access to their own information (Invoices, etc..) that will be provided by the backend system.
URL transaction and iFrames is not an option for us.
The second option is to call Web Services, directly or through the SAP Portal (we are using a central sr).
I am a NetWeaver consultant who heard about RoR but have no experience in this field.
All help and tips are greatly appreciated!.
Regards,
Ridouan

We used Client certificates. Still working on the PoC.

SSO b/w portal and webdynpro application customized login??

Hi,
I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
How to do the same without touching webdypro application ?
Can we call a method of webdynpro application from portal?
Regards
Deepak

1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
Add parameter to the application while defining the iview.Give some constant value.
Check value of this parameter in webdynpro and fire to next view.

How to set up SSO between e-portal employee node & ebill customer node?

We have a requirement to set up SSO between e-portal employee node & ebill customer node.
I am told that sso is possible only between 2 employee nodes.
Please advise.

Not sure I understand which part is failing.
Is it the C program calling your packaged function? Or does the error occur in the PL/SQL code, in which case you should be able to pinpoint where it's wrong?
A few comments :
1) Using DOM to build XML out of relational data? What for? Use SQL/XML functions.
2) Giving sample data is usually great, but it's not useful here since we can't run your code. We're missing the base tables.
3) This is wrong :
vStrSqlQuery := 'SELECT * FROM ' || vTblName                     || ' WHERE record_update_tms <= TO_DATE(''' || TO_CHAR(vLastPubTms, 'MM/DD/YYYY HH24:MI:SS') || ''', ''MM/DD/YYYY HH24:MI:SS'') ' ;
A bind variable should be used here for the date.
4) This is wrong :
elmt_value := xmldom.createTextNode (doc, l_clob(1));
createTextNode does not support CLOB so it will fail as soon as the CLOB you're trying to pass exceeds 32k.
Maybe that's the problem you're referring to?
5) This is most wrong :
     l_clob(1):=REPLACE(l_clob(1),'<?xml version="1.0"?>', NULL);
     l_clob(1):=REPLACE(l_clob(1),'<', '<');
     l_clob(1):=REPLACE(l_clob(1),'>', '>');
I understand what you're trying to do but it's not the correct way.
You're trying to convert a text() node representing XML in escaped form back to XML content.
The problem is that there are other things to take care of besides just '<' and '>'.
If you want to insert an XML node into an existing document, treat that as an XML node, not as a string.
Anyway,
Anyone that can help me to find out the required magic number
That would be a bad idea. Fix what needs to be fixed.
And please clearly state which part is failing : the C program or the PL/SQL code?
I'd vote for PL/SQL, as pointed out in [4].

Help required for MSS configurations on Portal

Hi Experts,
Can someone please send me Portal Configuration guide or some kind of document on how to configure MSS --> Overview and Organisation services. Do I need to pass any parameters or any other configurations required?
Please help me.
Earlier responses would be much appreciated.
Thanks
Uday

Hi uday,
Please find the below links
MSS Configuration within SAP Portal: Organization Structure
ESS/MSS configuration in Portal as a part of HCM
http://help.sap.com/erp2005_ehp_04/helpdata/EN/14/1a6493d09849448a0537ee6727e799/frameset.htm
Hope it helps...
Thanks,
Rahul.

Configure of Portal Content for Material

Hello,
Need some direction on Configuration of Portal for Material, What would be the Web Dynpro application for Portal Configuration?
Web Dynpro Application: MDG_BS_MAT_OVP or USMD_ENTITY_VALUE2
Application Configurations: BS_MAT_OVP_03
We are working on MDG 6.1.
Regards, Srihari

Thanks Abdullah,
As per MDG doc, Portal shall import USMD_ENTITY_VALUE2. My question is we need to give Web Dynpro Application & Application Configurations and additional parameters to configure XML content.
So what would be the Webdynpro ID here.
Regards, Srihari

Configuration os Portal with DNS

Hi Experts,
Can you clarify me
1. What is DNS, where can we store this value?
2. Is DNS and Portal URL both are same?
3 .Hhow can we configure the portal server with DNS?
Cheers
Phanikumar

hi,
what do you mean by dns? who told you, that you need it and what do you want to do with it?
usually DNS means Domain Name System <a href="http://en.wikipedia.org/wiki/Domain_name_system">Wikipedia</a>

Sso configuration in portal to share point portal

Similar Messages

Maybe you are looking for