SSO EP 6.0 and ITS

Hello,
I try to establish a single sign on connection from our portal to an its instance.
The portal version is 6.0 SP2 PL31
The ITS is 6.20 PL 17
My problem is that when I call a certain transaction via the ITS URL I always get the logon screen...
When I call a transaction by using the sap transaction starter I am immediately connected without login, but the transaction starter is using the sap gui...
I set the parameter ~mysapcomusesso2cookie 1 in the global.srvc; when I trace my html stream I can see that the SAP Logon Ticket arrives at the ITS, but I always get the logon screen.
I searched the forums for similar problems, but could not find a solution...
thanx for your help
Philipp

For what it's worth, I was about to post the very same problem! The problem also occurs with ITS PL16. We had this functionality working last year with EP6 SP2 P4 HF6 and ITS 620 PL7 - obviously something has changed in the patches from then until now.
I have found that using an IAC iView works OK, but trying to use a URL-based iView does not (both portal and ITS server are in the same DNS domain, all the usual stuff). We have to use a URL-based iView because our IAC will not run in an iFRAME as the portal launcher insists on doing.
- Darren

Similar Messages

SSO to R/3 via ITS, working, but got a little doubt

Hi ALL,
    I was configuring SSO from EP6.0 to an ITS Server,which talks to backend SAP system. from what i know was that both EP and ITS and CRM should be in the same domain to work with SAP logon ticket.
   in my scenario, I have EP and CRM in same domain ex: comp.com, but my ITS server is in different domain comp.co.corp, and the alias of this ITS server is comp.com
    I am able to set up SSO, but was surprised becuase i didnt do any cross domain SSO steps.. is it ok, if we have just an alias in the same domain of ep or crm (is it not necessary that the ITS system should be in same domain)..
please lemme know

Hi Gregor,
   I think I am facing the problem now. Are you sure that A DNS alias which is in same domain of portal will not redirect the cookie.
becuase my problem is that , It worked fine with CRM, but am facing some problem with R3.
what do u think?
Please see the answer from Sean,Morgan in the following post and lemme know your comments.
SSO EP6 and R/3
any help is appreciated
Thank you

ESS/MSS sso configure between java and abap instance

Dear Gurus,
I want to configure sso between java and abap instance for ESS/MSS. I couldnt find any guide for it, could you please help me gurus ?
Other question is, is there any specific role for ESS/MSS users in JAVA instance. I want to create users and assign this role to them.
Best Regards

Hi Kemal,
Hope you are doing good.
There should be a / in the ITS path before SAP.
Basically the entry that you have mentioned here should be accessible via browser as well. For eg in your case:
http://<its hist name>/sap/bc/gui/sap/its/webgui should be accessible over browser.
I also think you have put in a extra space in "w ebgui". It should be "webgui".
If the connector settings are working, then we can be sure that system connection is fine. You do not need to configure ITS settings.
Also for SSO, refer the SAP note:1083421 and configure the SS0 settings again.
Please run the SSO2 wizard and then make the automatic connection to
the abap server. This will solve any inconsistencies on the server
due to manual interventions.
Most likely reason for the error is that certificates were loaded
manually rather than using SSO wizard.
More help:
<http://wiki.sdn.sap.com/wiki/display/EP/Troubleshooting+SSO+between+AS-ABAP+and+AS-JAVA>
The SSO enabling parameters should be set on the R/3 server.
SSO Logon Ticket-> login/accept_sso2_ticket and login/create_sso2_ticket
More info:
<http://help.sap.com/saphelp_nw04/Helpdata/EN/22/41c43ac23cef2fe10000000a114084/frameset.htm>
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

[b]HOW TO:[/b] Copy and Paste THE Filename AND its PATH from Finder

HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
This is rudimentary, yet the word Path, is unknown to Mac Help.
Message was edited by: jbov

AJ,
Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
Jim
its tedious, but this should work:
open a terminal window.
Drag and drop the icon for the file in the terminal
window.
This will put the full path including the filename on
the command line.
Copy the path from the command line, and paste
(wherever).
Close the terminal window.

How can i get a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

I wish to request that a comedy, Dutch Treat or/and its companion Detective School Dropouts released in 1987 be included in the iTunes US store for me to down load. i will pay any thing to download them.

You can try requesting it via this page (these are user-to-user forums) : http://www.apple.com/feedback/itunes.html
But unless the the US rights-holder passes it to Apple and allows them to sell it in the US then Apple won't be able to sell it there

Semantics and its' role in Business Services

Role and importance of semantics in the context of services and SOA:
Semantics refer to interpretation of information and not the literal definition of information/ data. Applying semantics to information turns it into knowledge. Semantics is the act of applying references and drawing conclusions given a set of more scientific informational constructs. Typically semantics are derived using the context in which information is presented. Transposition on the other hand allows applies the rule of inference where in one can draw conclusions on the implication of truth based on some set of facts.
Read more about this at <a href="http://entarch.blogspot.com/2007/10/semantics-and-its-role-in-business.html">Surekha Durvasula's</a> blog.
Surekha is an Enterprise Architecture of a large retail company

Hi shalini,
        Thanks for the reply and can you please say me the menu path for T.code BUSD
And can u please say the difference between 4.0 and 5.0 versions
Regards
Narayana
Message was edited by:
        manam narayana
Message was edited by:
        manam narayana

What is RID in non clustered index and its use

Hi All,
I need help regarding following articles on sql server
1) what is RID in non clustered index and its use.
2) What is Physical and virtual address space. Difference in 32 bit vs 64 bit Virtual address space
Regards
Rahul

Next time Please ask single question in a thread you will get better response.
1. RID is location of heap. When you create Non clustered index on heap and
lookup happens to get extra records RID is used to locate the records. RID is basically Row ID. This is basic definition for you. Please read
this Thread for more details
2. I have not heard of Physical address space. I Know Virtual address space( VAS)
VAS is simple terms is amount of memory( virtual ) 'visible' to a process, a process can be SQL Server process or windows process. It theoretically depends on architecture of Operating System. 32 bit OS will have maximum range of 4 G VAS, it's calculated
like a process ruining on 32 bit system can address max up to 2^32 locations ( which is equivalent to 4 G). Similarly for 64 bit max VAS will be 2^64 which is theoretically infinite. To make things feasible maximum VAS for 64 bit system is kept to 8 TB. Now
VAS acts as layer of abstraction an intermediate .Instead of all request directly mapping to physical memory it first maps to VAS and then mapped to physical memory so that it can manage request for memory in more coordinated fashion than allowing process
to do it ,if not it will soon cause memory crunch.Any process when created on windows will see virtual memory according to its VAS limit.
Please read
This Article for detailed information
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now..

i lost my iphone4 yesterday..i have find my iphone apps in there and its updated to IOS 5. i wonder if they would be able to still access my accounts in there after i remote locked it.? its offline whenever i checked till now.. im wonderin if ist safe coz all my emails are there and all personal info..i hope someone could answer me..i reported to the police the ist step..coz when it happened ..policemen are there..then i went to the nearest MAC center and tried to track it..but its offline..so they asked me if i want to remote lock it..then i did...which i think the mcreason why i cant track my phone beacause its locked?? or not until they connect to wifi or 3g but its unabling them because i locked it..?

but when i do remote wipe ..it will erase everything in there and i cant track down the phone anyomore?

SAP SSO between Microsoft AD and SAP R/3 GUI&WebGui

Hello Everybody,
We are looking in to implementing SSO between Mircosoft AD and our SAP CRM ABAP 7.0.
We have users both logging in through SAP Gui and also the web gui.
Found there a multiple options for achieving SSO:
1) SNC
2) X.509 cerfificate
3) Kerberos
I would like to go with X.509 certificate , and have already implemented the SAPCRYPTOLIB 5.5.5. Now am trying to download the "SAP NW Single Sign on 2.0" for installing the Secure Login Library SSL. And when i looked at PAM the required product versions are only:
1. SAP EHP1 for SAP NW 7.3
2. SAP NW 7.3
3. SAP NW 7.4
4. SAP NW CE 7.2
So I went back and looked at PAM for SAP NW SINGLE SIGN ON 1.0 required product versions and I only see the below:
1. SAP EHP1 FOR SAP NETWEAVER 7.3
2. SAP NETWEAVER 7.3
3. SAP NETWEAVER CE 7.2
Our version of SAP is CRM ABAP 7.0, so I am not sure how/which version of Single Sign on I have to use.
Can someone please advise.
Thanks!

Thank you Donka for the information!
Looks like NW SSO 2.0 is supported for AIX 7.1 SAP ABAP CRM 7.0.
But we also have users logging in to ABAP CRM 7.0 via HTTP Web dispatcher.
And the PAM does not mention if NWSSO 2.0 is supported for X.509 method for web gui users logging in via HTTP.
Also if we decide to go with SSO 2.0 and I manually Install the COMMONCRYPTOLIB 8 instead of the SAPCRYPTOLIB 5.5.5, I should be able to use the Secure Login Library files that come with the SSO 2.0 right?
Here's our current Kernel version:
kernel make variant 720_REL, 64 BIT AIX, UNICODE , Patch number 500
Thanks!

SSO b/w portal and webdynpro application customized login??

Hi,
I have one webdynpro application which has a login screen (Created as Webdynpro view). If user enters user/passord, the same gets checked from a custom table in the db (Method for checking user credtentials has been written in view controller). if user credentials are correct it performs some actions defined in webdynpro application.
I want to configure SSO b/w portal and this webdynpro application sothat when user logon to the portal and open this webdypro application, Login page of webdynpro application should not be shown i.e user credentials should be passed from portal and corresponding authentication method in webdynpro should be called to authenticate the user.
How to do the same without touching webdypro application ?
Can we call a method of webdynpro application from portal?
Regards
Deepak

1) To enable ticket authentication for the web dynpro iviews, you must maintain the definition of the system running the Web Dynpro application and set logon method to "SAPLOG"
2)Since you have customized login screen, you need to bypass this screen manually when you login from portal.
Add parameter to the application while defining the iview.Give some constant value.
Check value of this parameter in webdynpro and fire to next view.

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong

Problems with Syncing iPhone 3G (4.2.1. iOS). What is appearing in the status bar is "Syncing "untiled playlist.." and its stuck at backing up. I noticed that my name has been replaced to "untitled playlist". Whats wrong

Welcome to Apple Discussions!
Maybe a long shot, but WD is not known for the quality of some of their enclosures, although I do like the drives themselves. It may be worth mounting this drive in a different enclosure, something like one of OWC's FireWire enclosures with the highly reliable Oxford chip sets. I wouldn't be inclined to trust a WD enclosure, especially if it already seemed to be acting in a flakey manner.
Here's an example of what I mean:
http://eshop.macsales.com/item/Other%20World%20Computing/MEP924FW8E2O/
I have 3 of these and I really like them.
From what I understand, if the drive spins up, it is often possible to recover data from it. To be absolutely certain to destroy the data, you just about have to take a hammer to the disk. Hopefully, there will be a way to get your data back.
Good luck!

TS1292 My iTunes will not work at all I've had 7 different people try it and its still not working

My iTunes will not work at all I've had 7 different people try it and its still not working

Cconnect it to your computer with the latest version of iTunes installed.

Display data to edit based on fields and its value defined in internal tabl

I need to display data in a internal table for editing in a screen.
you have a internal table with field name , data types and its value. I need to display data in a screen ( sceen painter not in a report) row by row in vrtical format.
The internal table's structure not fix. you can have any number of fields in the internal table.
Can you please send me code if it is available with you or send me any senario in SAP if any ...so that i can debug to extract the code..
have to display data vertically as below in editable format,
for example,
Airline
Flight Number
Flight date
Flight price
Airline Currency
Plane Type
Maximum capacity
Occupied econ.
Total
No of fields will change.
also F4 help needs to be attached with each field.
I think it can be done through step loop. can anybody give sample code or tell me where to find in SAP or somewhere else?
it will be great help to me..
Sanjeev

Hi
just check out this program DEMO_DYNPRO_STEP_LOOP.

SSO EP 6.0 and ITS

Similar Messages

Maybe you are looking for