SSO error message when publishing a BI 7.0 report to the NW04s Portal
Please indicate how to resolve the following SSO error message received when publishing a BI 7.0 report from Query Designer to a PCD folder on a NW04s Portal:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId (server alias)_PORTAL_ABV on host (server alias) with SSO not authorized: Authentication f
Hi,
Please check if the integration and sso configuration did correctly
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0a5216a-349c-2a10-9baf-9d4797349f6a
Hope it helps.
Regards,
Mona
Similar Messages
-
Error message when publishing from Captivate 4 to MS Word 2003
Is anyone else getting an error message when publishing from Captivate 4 to MS Word 2003? I tried all 4 types and still get the following:
"An error was encountered while publishing to Word. Verify the following and try again. Word is installed on your system. Word is not busy."
Word is installed on my system and was not in use, so I am not sure why the error. Any thoughts?
Thanks in advance!Hi there
I use Captivate 4 and it publishes to Word 2003 without issues.
Perhaps it has to do with the way your Word 2003 has been installed? Either that or it's a "rights" issue to be addressed by your IT propellerheads?
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Error message when trying to view/print Crystal reports in B1
I get the following Error message when trying to view/print crystal reports in SAP B1/Crystal Reports Integration Tool for SAP Business One:
" Could not load file or assembly 'Crystal Decisions Windows Forms, version=12.0.2000.0, Culture=neutral, Public Key Token=692fbea551e1304' or one of its dependencies. The system cannot find the file specified. ????Hi
Common issues for this :
1. Once you install crystall add on ,you need to go to Crystal report Administration >Account setup .
Put on the user name and password and click on creating ext tables
Try then running the report .
If not the case ,
make sure you install runtime .
You need :
1.Crystal report basic from SAP download -(Not necessary if you want only report viewer >
2.You need to have crystal integration addon (I think service pack is SP1)
3.Make sure you have runtime install
When you are installing ,make sure you restart your PC before you do or remove temporary file s
Hope this solves your issue
Bishal -
I receive the follwing error message when trying to open my ipod touch/itunes "the itunes libary.itlfile is lockedon a lockdisk or you do not have write permission on this file. How do I resolve this problem?
Repair iTunes Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
If you've brought over the library from another computer you may also want to remove any "mystery" identities (S<string of dashes & digts>) that have come over from the old computer...
The images above are from Windows 7. Hopefully the system isn't too different in Windows 8.
tt2 -
Error message when I try to add an image to the header
I receive the following error message when I try to add an image to the header:
Acrobat.com encountered an unexpected error.
I have tried to add .jpg and .gif without success.
Thanks,
MDawnHi,
We typically see this when an organizations IT department is blocking the upload of images. Are you working on this at work? If so, can you try adding the image outside your companies network?
Thanks,
Todd -
I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?
See my answer to your previous duplicate question. What happened when you tried my answers?
LN -
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
We get an error message when trying to download in-app purchases on the iPad using an iTunes card. This worked on other ipads. Just not this particular one.
We have tried deleting and re-installing the apps and attempting the in-app purchase again. Still get error messages. Any suggestions?hello Mac.INXS, please [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from mozilla.org]] and then try logging into AMO again.
-
I'm receiving the following error message when trying to publish my websites. I'm only updating them after making changes. They were previously published and working fine until now.
Can't create the file "mwmac_white.png." The disk may be damaged or full, or you may not have sufficient access privileges.You might try closing out of iweb and opening disk utility and repairing your Disk Permissions on your HD.
-
Error Message When Syncing Ipod "There is no disk in the drive ... "
When doing a search on the internet for this error message, i see a few other previous posts on forums.ilounge.com with others having this issue with Itunes, but all I can find is someone talking about deleting the Itunes preferences files on my computer, and I did that, but that didn't help. I was wondering if anyone had any bright ideas.
I get this annoying message EVERYTIME I sync my Ipod:
"There is no disk in the drive. Please insert a disk into drive G:".
(Drive G on my computer is my Ipod when i have it plugged in). It doesn't seem to interfere with anything; all I have to do is click continue and the message goes away. But as I said, it's annoying, and I want it gone. I want to avoid reinstalling Itunes if I can due to the hassle of having to do so, plus previous posters on forums.ilounge.com said they did so an it didn't help. If someone can direct me to a previous string where this has already been discussed please post me the link. thanks!Hi there
I am also getting this error message. One day my iPod was syncing fine, the next I was getting this error message. I have tried every conceivable drive letter, and still I get the message. i have also tried every drive on my computer, still the same message.
I have restarted and restored the iPod several times, no change to error message.
I shelled out £16.99 on a new sync cable, thinking that might help - but no, i still get the same error message.
In addition, my iPod screen displays the DO NOT DISCONNECT sign.
I seem to be able to perform a sync, but at the end, when iTunes says sync complete, the error message appears on my screen (incidentaly the header bar of the error message says: CorelLOMonitor.exe - No Disk) and the iPod screen continues to flash "Do Not Disconnect". This continues indefinatly and I have only been able to stop it by unplugging the iPod form the Sync cable.
I really would welcome some assistance with this problem.
Many thanks -
What do i have to do to get sufficent privileges?
Why does the title says "I get an error message when downloading Itunes" when you clearly do not? The issue has nothing to do with downloading but rather installing of iTunes which is a seperate step.
Maybe if a search is performed for the real issue then a resolution will be found. -
Error message when publishing to Flickr through Lightroom 3
When I update one of my collections in Lightroom and then directly publish into my Flickr account, I often get the following error message: Flickr API returned an error message (function upload, message Filesize was zero). Does anyone know why I am getting this or what I need to do to resolve? Thanks in advance for your help
i get exactly the same thing. but i do have mobile me. i created a site and published it to one of my mobile me accounts. it worked fine. then i moved the file to another computer, made some changes to the text and republished. this time i got the 'publishing error' message described above.
then i tried opening a a new mobile me account, and published said site to this new account. same problem.
then i tried publishing to a folder. i also cannot publish to a folder, or more specifically, when i publish only some of the files seem to get published before that message appears.
strange thing is some of these files do appear in the folder and i was successfully able to upload this folder to the iDisk. and the site partially worked (to see it: www.designersdetails.com) but only those files that got published before the error message work. a good portion, including the picture galleries and the google maps page do not work.
can anyone shed any light on this? i've followed all of the suggestions i have found in the forums. nothing works.
thx
fj -
I have a website using iweb and am having problems publishing. When I try to publish it appears to be going through then stops at home page and I get an FTP error message. I talked to my website host and they checked it from their end on two brosers and it is fine. There suggestion was to contact this support group. They thought it had something to do with iweb code writing.
What version of iWeb are you using? What are you using to upload the site files to your FTP server?
I talked to my website host and they checked it from their end on two brosers and it is fine
What did they check? Have you tried viewing your site that's online to see if the changes went thru? Before you do so clear your browser's cache (Command+Option+E for Safari) and then load the site.
OT -
Error messages when publishing
Hello! I have a site that I have previously published, and after I made changed to it, it keeps giving me error messages. These are the ones I get:
"Publish failed to due a netweork error. Please check your internet connection and try again." (There is no internet connection problem at at all)
"there was an error updating .mac"
I am using iWeb 1.1.2. I need to publish this website for a class (very soon), so I'd appreciate any help I can get!
Thank you in advance.Yes, I previously was able to publish. Out of the blue, it started giving me errors and has been giving me them ever since. Of course there was a cause, but I wasn't doing anything different than normal (pressing Publish or Publish All) so I have no clue what caused it.
However, I keep publishing my updates with success even though I keep getting error messages. I am not sure how my site gets updated when it tells me that it has not. Which components could be missing since the site appears to be perfectly fine?
Here is the link if it helps (it's mostly in Castillian): http://web.mac.com/alilevine/iWeb/FotosNoReveladas/Bienvenidos.html -
Error message when publishing to MobilMe using GoDaddy domain name
Hi all,
I am trying to publish my site from iWeb '09 to MobilMe. I am using a domain name purchased through GoDaddy. When I publish the entire site in iWeb, it seems to publish fine, but when I click to "visit site", I get a page with an error message, "Looking for something on MobileMe?
The account you requested doesn't exist or is currently inactive. Please make sure the URL is spelled and capitalized correctly, and try again.
MobileMe Login | MobileMe Support | Learn more…
I have checked my login info, etc. I have no idea why this isn't working. Any thoughts???
Thanks so much - ChrisThat Vist button has been a problem for others also. Why, I don't know. Try using the File ➙ Visit Published Site menu option. That has worked for me when the Visit button wouldn't.
If that menu option works you can try the following to see if you can get the Visit button to work:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
3 - go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and try again.
Maybe you are looking for
-
How can I get product replacement warranty ?
This is first time I’ve used Apple product. I choose Macbook Pro 15 inch With Retina Display (MC976) for my first Apple device. I love this stuff so much, simply excellent OS with the coolest graphic effect ever, superfast start up, elegant aluminum
-
What is the difference between Funds Center and Commitment Item ? Thank you Ravi
-
Fix: Active directory corrupted (NTDS ISAM Database Corruption errors in eventlog)
It worked for me! Frank Keunen IT-Pro Evangelist :: Microsoft IT Infrastructure Engineer Follow the procedure below to fix Microsoft Active Directory database problems (corrupted Active Directory due to e.g memory issues/disk problems): 1. Reboot the
-
Install on new Mac Mini with Panther
On a New Mini out of the box with Panther installed is it better to set up the system and then upgrade to Tiger. Or do I have a choice to upgrade first.
-
So I have a school laptop (macbook air), and they have recently updated the OS X. It has signed me out of iMessage. When I try to sign in, the accounts page comes up. When I sign in, it says the following: "The server has encountered an error process