SSO for application systems with local users?

Hi all, I'm new to Oracle Identity Management. My company is going to implement SSO for inhouse applications. However, some applications have their own local users (e.g. admin, guest, etc.) who have to login to the application system through the same interface. We put all organization users in an Oracle enterprise Directory server, which is the authentication backend of the Access Manager. After implementing webgate, such local users can't get authenticated. I'd like to know if it's possible to configure particular users/applications to bypass SSO and use local authentication? Thanks.
Rgds
/ST wong

Possible solution is to create a new entry point for local users. Create two proxies one for actual user entry and another for local user. You can restrict n/w access to proxy with local login so that only few hosts based on your requirement who needs to access system with local accounts. This way you will have two web sites for single application.

Similar Messages

Archive / Delete in AE and Application System with Local IE

Hi:
When come to archive and deleting strategies, except the messages persisted in central Integation Engine, should we include messages in Adatper Engine and Local Integration Engine ?
Thanks
Liang

if you are busing windows server backup they should self manage the space, the exception would be if you are using the external drive for something else besides the backups and that is causing it to run out of space.
Your external device should have a "windowsimagebackup" folder that contains the backup since you have not been getting a backup in the past 3-4 night you may want to just wipe that folder and start fresh with a full backup. the drive space may be misleading
too, if the drives you are backing up don't have enough space to create a snapshot you will get space errors so you may want to make sure you have space available on the backup drives too.
If your exchange component on SBS has not backed up you may have accumulated transaction log files causing disk space to be too low. you can clear the log files but turning on circular logging cycle the unmounts exchange database and remount, then turn off
circular logging and cycle the database again. Circular logging can be found under the database setting in the exchange console.

HT1923 I have a Vista Operating system with 2 users. Somehow I got two different play lists each with one user. One is too big for the storage and has a vast amount of duplicates. Can I delete the one that is twice as large and then access the other li

I have a Vista operating system with 2 users. Somehow I got two diffent libraries for the users. How can I delete the one and then access the correct library on the other users profile?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Any app , for video chat with AIM users???

please recommend any app for video chat with AIM user???

Hi
The latest version of AIM (called Triton) doesn't work with iChat. Have you tried version 5.9 of the AIM application on the PC?
If that doesn't work for you, you could try Trillian, which has a better picture than AIM (The AIM video window is very small and not resizeable). The Trillian Pro version, required for video, costs $25 but you can try it free for 14 days.
Dave

Is it possible to build a project with Labview 2010 on a Windows XP system, that is useful for a system with windows 7 on it?

Hi there,
I am planning to use Labview 2010 in a short time.
But before I'm going to use it I have some questions.
I know it is possible to run Labview 2010 in an XP environment. But is it also possible to, when running Labview 2010 on a XP system, to build a project to a version that is useful in a Windows 7 environment?
Or do I have to run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?
Please give me some information.
I hope to hear from one of you soon.
Regards,
Kenny
Solved!
Go to Solution.

Is it possible to build a project with Labview 2009 on a Windows XP system, that is useful for a system with windows 7 on it?
Thanks.
Philippe B.
Certified Associate Developer / Dépt Moyens d'essais
www.ingenia-system.com

RPM Upload/Download Project Data u2013 No Selection list for Application system

When trying to upload from project or download to project from/to application SAP Project System there is no selection list under the drop down field for Application system. As I understand from the RPM guides, this is the logical system. We have defined the logical systems in IMG. Is there some other configuration we are missing?
We are using SAP RPM 4.5 (CPR Xrpm 450_700: Support package 0009)
Any help appreciated

Hi,
Have you deleted cache and tried it again.
Pramod

What Kind of microcontroller is needed for alarm system with PIR sensors

Hi ! I'm student at Technical University Varna ,
Bulgaria . I'm interessted to create my own alarm system with Labview,
but I'm not sure what kind of controller i need and what kind of PIR
sensors. Thank You

This is duplicate post:
What Kind of microcontroller is needed for alarm system with PIR sensors

OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]

Hi Guys,
Im trying to create a repository .I have a single node OVM server and have presented two LUN's (Hitachi HUS110 direct attached (via FC))
I've created a server pool and unchecked the clustered server pool. I see the LUN's (physical disk from Oracle Virtual manager) .But when creating the repository i'm having this error
"OVMRU_002030E Cannot create OCFS2 file system with local file server: Local FS OVMSRVR. Its server is not in a cluster. [Thu Dec 04 01:33:10 EST 2014]"
Any steps i missed?Appreciate anyone's input
Regards,
Robert

Hi Robert,
did you actually add the OVS to the server pool, that you created?

Do I need to Create Primary Key Class for Entity beans with Local interface

Do I need to Create Primary Key Class for Entity beans with Local interface?
I have created my entity bean with the wizard in Sun One Studio and it does not create a primary key class for you.
I thought that the primary key class was required. My key is made up of only one field.
Anyone know the answer.
Jim

u dont need to create a primary key class for a entity bean.if ur table's primary key feild(int ,float) is a built in or primitive data type,then u dont need one.But if ur table has a primary key field which is non primitive (for example StudentID,ItemID etc)then u have to create a primary key class.
hope this helps :-)

Need to login to 125 macs with local user at once - unix command?

Is there any way to login into the local admin account on all these imacs from ARD using command line

Assuming the Mac is sitting at the login screen, with cursor blinking in the name field, send the following as Root user:
osascript <<EndOfMyScript
tell application "System Events"
keystroke "username"
keystroke return
delay 3.0
keystroke "password"
delay 3.0
keystroke tab
keystroke return
keystroke return
end tell
EndOfMyScript
http://www.macos.utah.edu/documentation/miscellaneous/remoteguilogin.html

App.server load balancing for SAP System with 1 PS

Hi,
In SAP CPS 7.0 (Build M26.12) I have a SAP system with Central Instance + 10 App.servers, but all instances are managed by 1 ProcessServer.
After activating the "App.server load balancing" setting in SAP system definition the application servers are becoming visible in CPS with their load factors (number of BGD wp's on app.servers) and load numbers (number of active jobs on app.servers).
This is so far fine, but the additional functionality is not working as I would expect, I have issues with 2 functionalities:
1. Based on documentation after activating also the XAL connection the CPS should submit the job on app.server with best performance based on XAL monitoring data filling the TARGET_SERVER parameter.
This functionality is not working for me at all
2. A useful functionality after activating the "App.server load balancing" setting is that the ProcessServer is going to "Overloaded" status when all BGD wp's of SAP system are occupied, thus restricting submitting new jobs during overload situation. But I had an issue also with this functionality, after SAP system recovery from overload situation, the CPS still remained in Overload status (so no new jobs were submitted).
As a workaround I had increased the treshold values for loads on all app.servers for this SAP system, what was fine for several days, but after a while I believe this was a reason of unexpected performance issues in CPS, therefore I have deactivated the 'App.server load balancing" setting at all for this ProcessServer.
I would appreciate your feedbacks with this functionality.
Thanks and Regards,
Ernest Liczki

Hi Preetish,
This connect string option is to loadbalance RFC connections. These are balanced upon login, once you are connected to a particular application server (AS) you stay on that server until you reconnect.
Since CPS uses multiple RFC connections, this will result in the connections being distributed over the available AS resources which is fine as long as they are generally evenly loaded. If you have certain AS hosts that are continuosly more loaded than the rest, then you probably don't want the CPS RFC connections to end up on these servers.
The original question is about loadbalancing of batch jobs over the available AS resources, and this is done independent of the RFC connection load balancing. Even if all CPS RFC connections are pinned to the DB/CI host, you can still loadbalance jobs over the available SAP AS hosts, either by using SAPs builtin balancing, or the CPS algorithm by activating the checkbox as indicated in the first entry in this thread.
Finally, to reply to Ernest's question: I believe there are some fixes on the app load balancing in the latest release, M26.17 should be available on the SWDC now.
Regards,
Anton.
Edited by: Anton Goselink on May 29, 2009 9:06 PM

Create a Connection on TREX for 2 systems with same SID

Hello world,
Here is my case,
We have a PRO systems With SID=PRO On Host= production , and a Sandbox system with also SID=PRO On Host=SANDBOX
now i need to create a connection in TREX in parallel so when i add the 2nd one it just edits the 1st one that i have already made
So is it possible to create 2 connection of same SID but diffrent Hosts In parallel?
If Yes how ?
Thanks In Advance...
Ahmed Salam

Hi Ahmed,
it could be possible from the TREX perspective , however such configuration isn't supported . The reason for this is that the SAP applications create indexes using the ABAP system ID and client as a part of the index names (f.e. esh:e10002~e10002~acc_sid~sid). As it's not possible to create an index with the same name 2nd time, you will not be able to use the TREX instance with two systems with same SID.
Best regards,
Mikhail

Two applications systems with the same DB

Hi,
is it possible to have two Oracle applications systems on the same DB ? I mean for exemple two e-business suites (Oracle applications) each one with a different instance of the same database ( DB version 9i and OA version 11.5.9).
Many thanks before.

Not possible,certified or supported,anyways you cannot have two SIDs for the same DB can you?
Sam
http://www.appsdbablog.com

No file locking in office 2004 with local user

A user shares his home folder on Mac OS X 10.5.8. This user has a Excel file open in Office 2004. When an other user opens the same file using AFP file sharing there is no message warning the user the file is being modified by the local user.
All software is up-to-date. Does anyone know how to solve this problem?
This problem does not occur in Office 2008 with 10.6 clients.

A user shares his home folder on Mac OS X 10.5.8. This user has a Excel file open in Office 2004. When an other user opens the same file using AFP file sharing there is no message warning the user the file is being modified by the local user.
All software is up-to-date. Does anyone know how to solve this problem?
This problem does not occur in Office 2008 with 10.6 clients.

Party communication channel for multiple stores with multiple user id and passwords in sap pi

Hi Exeperts,
I have a scenario proxy to SAOP . where i am sending some information from my stores to third party company with single user id and password in communication channel.
but requirement is changed now i have 20 stores with 20 user id and password for communication channel.how can i achieve this requirement?
Can i create 20 communication channels for 20 stores or can handle through the party based communication ?
Please help us achieve the requirement.
Regards
Ravinder.s

Hi,
In the SOAP Receiver adapter, you can only store 10 userid/password combinations via Authorization Keys. These are called via Dynamic Configuration via technical name TAuthKey. In your case, for it to work, you need:
1. 2 business components/2 SOAP receiver communication channels.
2. 1 receiver determination with xPath for username to determine correct business component
3. 1 interface determination
4. 2 receiver agreements (one for each cc)
Hope this helps,
Mark

SSO for application systems with local users?

Similar Messages

Maybe you are looking for