SSO for Enterprise Portal 6 with different Portal and R/3 userIDs
Hi there,
We are using SNC library for SAP GUI logon to R/3 and SPNEGO for Web access to EP. What works for us currently is:
SSO from Windows logon to Portal using SPNego (LDAP as our datasource with AD)
However once we are inside the portal, the SSO to R/3 using SNC is not working. I have my Portal user mapped to my R/3 user as they are different usernames.
But, if i launch SAP GUI on its own i can SSO into R/3 no problem.
So, i have 3 queries here!
1) Why am i not able to SSO into R/3 once i have SSO into Portal?
2) Is there any way around the high maintenance of the user mapping?
3) I have read on SAP Help about "Using an LDAP Directory Attribute as the ABAP User ID" but this will still require user / administrator to maintain the R/3 password.
Is it possible to disable the R/3 password and thus have no maintenance as the R/3 (ABAP) User ID will be stored in LDAP attribute?
Hoping you can help...
Thanks.
Answers below:
1)
When you say "ITS" I assume you are referring to the Integrated ITS in NetWeaver, not the external ITS product ?
Anyway, if you are referring to Integrated ITS, then surely you are using webgui, not SAP GUI. The webgui is accessed via browser and is not related to SNC or SAP GUI product. The SAP GUI product is a Windows application that uses SNC to authenticate to SAP systems.
If you are logged onto portal, which is a J2EE application and trying to access webgui which is running on ABAP Engine, then this might not work becasue your SSO2 trust is not setup correctly. Do you see an error in work process log saying anything about why the SSO2 ticket is not accepted ? Also, if ABAP and JAVA are on same system and Java Engine was installed as an add-in, you might need to create new SSO2 certificates to avoid a clash, and change client number from 000 to something else so SSO2 tickets issued in J2EE engine are differentiated from SSO2 tickets issued by ABAP Engine, but they are still trusted through configuration in STRUSTSSO2 t-code.
2)
You need to use a different product, which is available from a SAP partner to do this. I am not allowed to mention third party products on this forum, so if you want to know more you will have to contact me offline via email.
3)
See answer to question 2.
Thanks,
Tim
Similar Messages
-
Single ERS Invoice for multiple POs with different GS and same IP
Dear All,
I have a Requirement as per the below scenario:
We need to have single invoice created using ERS (MRRL) functionality in the below scenario:
Two POs created with different Partner function GS (goods supplier) and same IP (Invoice party partner function).
Ex:
GS IP PO GR ERS
vendor1 10001 4500001 500001 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
vendor2 10001 4500002 500002 Yes ( GR-IV-Yes, GR done- Yes, same payment terms - 001)
When I run ERS for last 1 week (GR) and select the option (Doc selection – per IP or other criteria like GRs posted in last one week) , system should create 1 invoice document. Standard SAP posts 2 documents for each GS.
I have tried using 2 user exits for MRRL, but none of them work for this functionality.
Thanks,Hi,
Go for MIRO without MRRL.
Instead ERS, you can post single Invoice(MIRO) for multiple POs for one vendor.
OR
Check with Technical consultant and go for development to have single ERS output for multiple ERS invoice documents for single vendor.
Regards,
Biju K -
I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?
The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.
-
I am trying to insert rows for alert_id 22 with diff abc_id and xyz_id
I am trying to insert rows for alert_id 22 with diff abc_id and xyz_id
these inserts will store in two tables that I have to join in the cursor.
I have written cursor without passing cursor parameters. but here i need to pass acb_id and xyz_id along with alert_id.
then if these are saticified with alert_id 22 then I want to stop the loop run, else i need to continue the loop. bcause the abc_id and xyz_id are diff for alert_id 22
This is the issue I am facing!
Please let me know if you have any idea. Let me know how to use cursor parameters here and in loop.
Sample proc like this::
Declare
main_cursor
another_cur
alert_cur
begin
need to check first abc_id,xyz_id is already exist with alert_id 22
if this set of records already exists then
exit from the loop
else
continue with
loop
here coming the insert statements with different condition getting from first two cursors.(this part is ok for me)
end loop
end if
Please write the logic if any idea on this.
-LRKI want to stop if already alert_id is exist!
-
I bought a new Macbook pro in 02/26/2013 from Apple Canadian Ices -003. Than I could not use it, because my cursor uncontrollably was jumping around the screen, I was resumed my trackpad become bulging, Than on11/25/ 2013 they changed my trackpad for free, because was manufactoring defect, but not the bulging battery. They said that is do not needed. Since that my cursor is quiet often quivering, I think my Macbook has serious manufacturing defect. But they said no, during a year period I went to the genius bar at least 15 times, with this and similar problems. I went there yesterday, with different problems, and they said one of the screws came off from my truck pad, therefore they need to fix it and change it. I said: - What, how, what is the real problem? A screw does not comes off just like that? They will change my trackpad again, but not the battery. They said has to rebuild the operation system, I'm saving all of my data right now! I would like to exchange the battery too, or maybe get a new Macbook. My Macbook is 2010 China model. How long I would have this trackpad problem? What are you suggesting?
If it's a 2010 as you say towards the end of your post, it's out of warranty. The battery isn't covered in that case. Why don't you just buy a new battery if that's your concern? If it's a 2013 as you say up at the top, it shouldn't have a bulging battery. How do you know it does? If it really does, ask for the store manager and explain the problem.
-
Single invoice for multiple orders with different divisions
Dear All,
while I am trying to do single invoice for muliple orders with different divisons invoice is gettting splitted..In copy control vbrk routine I tried with 003 and 007 etc..but result is same..what configuration need to be done for getting the single invoice
Thanks In advance
Regards
CNRNAIRHello
single invoice for multiple orders with "different divisions" invoice is getting split
FYI - Different Division means different Sales Area.
So, sales doc (whether sales order, Delivery & Billing) is applicable to EXACTLY one sales area.
Thus, combining docs with different sales area is practically impossible.
Provided, you are using common division.
Hope this assist you,
Thanks & REgards
JP -
I can't install ADE on my PC, because as I try to open it a message of error appears to me: The application will be closed. I've already try with different browsers and also with the manual installation, but nothing..
1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
I have 2 apple id's with different apps and data saved under each. It's very annoying so now I want to create a new id with my primary email address I use now. If I do that is there any way to transfer all my saved apps and app data like game saves etc so I don't lose all of that information and can easily switch to a singular apple id?
Apple does not transfer content bought with one Apple ID to another Apple ID. Apple will not merge two Apple IDs.
If most of your content was bought with the Yahoo! Apple ID but you now want the Gmail address for your Apple ID, the trick will be to change the address used for the Yahoo ID with the Gmail address. However, to do that you must first free the Gmail address from that other Apple ID. Use the instructions from Apple to substitute another address that is not used as an Apple ID for your Gmail address in the Apple ID with the Gmail address. Then, when the Gmail address is no longer used in an Apple ID, you can use the same instructions to substitute the Gmail address for the Yahoo address in the Apple ID with the Yahoo address.
Changing the email address you use for your Apple ID -
http://support.apple.com/kb/HT5621 -
I'm using the MHDDK for analog out/in with the PXIe 6341 DAQ card.
The examples, e.g. aoex5, show a single Timer (outTimerHelper::loadUI method), but the example shows DMA data loaded with the same vector size.
There is a comment in the outTimerHelper:rogramUpdateCount call which implies that different buffer sizes per channel can be used.
(the comment is: Switching between different buffer sizes will not be used)
Does anyone know what the format of the DMA buffer should be for data for multiple channels with different frequencies ?
For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave. What does the DMA buffer look like ?
With the same frequency for each channel, the data is interleaved, e.g. (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?Hello Kenstern,
The data is always interleaved because each card only has a single timing engine for each subsystem.
For AO you must specify the number of samples that AO will output. You also specify the number of channels. Because there is only one timing engine for AO, each AO will channel will get updated at the same time tick of the update clock. The data will be arranged interleaved exactly as the example shows because each AO channel needs data to output at each tick of the update clock. The data itself can change based on the frequency you want to output.
kenstern wrote:
For example, say we want a0 with a 1Khz Sine wave and a1 with a 1.5Khz sine wave. What does the DMA buffer look like ?
With the same frequency for each channel, the data is interleaved, e.g. (ao0#0, ao1#0; ao0#1, ao1#1, ...), but when the frequencies for each channel is different, what does the buffer look like ?
In your example, you need to come up with an update rate that works for both waveforms (1 KHz and 1.5 KHz sine waves). To get a good representation of a sine wave, you need to update more than 10x as fast as your fastest frequency...I would recommend 100x if possible.
Update Frequency: 150 KHz
Channels: 2
Then you create buffers that include full cycles of each waveform you want to output based on the update frequency. These buffers must also be the same size.
Buffer 1: Contains data for the 1 KHz sine wave, 300 points, 2 sine wave cycles
Buffer 2: Contains data for the 1.5 KHz sine wave, 300 points, 3 sine wave cycles
You then interleave them as before. When the data is run through the ADC, they are outputting different sine waves even though the AO channels are updating at the same rate. -
Price determ. for a Customer with different ship to parties within
Dear all,
I will try to explain our need with an example.
We received a requirement from our sales department who wants to manage a sales price of a specific item which is dependent from a fixed quantity in case the order is placed for a customer with different destinations (different ship to parties).
The example is as below:
Sales Price for Customer and Material A is 50u20AC per pieces for a scale of 10 pz.
The condition type ZPR0 used is a copy of standard PPR0 and it has the following characteristics:
calculation type Q Quantity
scales basis C quantity basis and scale formula "0".
We receive an order by our Customer for 10 pz and for two destinations:
5 pz directed to the location MMM
5 pz directed to the location BBB
The customer is asking us to apply this price because the pre-requisit is satisfied but how can we determine automatically in the same order if the material A is present in several order items?
We create an order with two sales order items and in each one we specify the destination in the partner roles. How can we set the condition type in order to redetermine the exact price considering the total quantity of material whitin the same order?
I hope you can help me
thanks in advance
AndreaHi
Your question is not fully clear to me. But what I guess you are looking for a discount which will be applicable to only one order and not for the other orders even if those orders contain the same material.
If I am correct, than yoy can do it by setting the condition Update. Suppose, you want to give Customer-material specific discount,i.e. condition type K005. Activate the "condition update" check box in the condition type detail screen first.
Then, in VK31 ,create a condition record for K005 & save it.Go to the change mode (vk32) of the cond. record and now enter " 1 " in the " No.of orders" coulmn & save it.
Now if you will create an order, this discount will be applicable only for the first one order only and next order onwards it will be deactivated automatically.
Similarly,You can set it also in terms of quantity,if the condition is calculated based on quantity ,by putting the quantiy (up to what quantity you want it to be effective) in the "Max. condition base value" column.
Regards
Pradyumna
Edited by: pradyumna patel on Jun 24, 2008 11:28 AM -
Unable to send mail with different fonts and colors
Hi All,
here is the explanation for my problem:
I am sending mail using javamail. when i send the text with different font and color its not received in the same way. it is simply sending as plain text.
Please help me on this issue.
Thanks
NGHello,
I am trying to develop an email application. It consists on sending email from [email protected] to [email protected]
How can I do this in java ?
I am using this software but it works only with gmail !!
* Send Email to the webmaster
String d_email = "[email protected]",
d_host = "smtp.gmail.com",
d_port = "465",
m_to = "[email protected]",
m_subject = "Email from user";
Properties props = new Properties();
props.put("mail.smtp.user", d_email);
props.put("mail.smtp.host", d_host);
props.put("mail.smtp.port", d_port);
props.put("mail.smtp.starttls.enable","true");
props.put("mail.smtp.auth", "true");
props.put("mail.smtp.debug", "true");
props.put("mail.smtp.socketFactory.port", d_port);
props.put("mail.smtp.socketFactory.class", "javax.net.ssl.SSLSocketFactory");
props.put("mail.smtp.socketFactory.fallback", "false");
SecurityManager security = System.getSecurityManager();
try
Authenticator auth = new SMTPAuthenticator();
Session session = Session.getInstance(props, auth);
//session.setDebug(true);
MimeMessage msg = new MimeMessage(session);
msg.setText("This is a message from: "+UserEmail+"\n "+UserMessage);
msg.setSubject(m_subject);
msg.setFrom(new InternetAddress(d_email));
msg.setSentDate(new Date());
msg.addRecipient(Message.RecipientType.TO, new InternetAddress(m_to));
Transport.send(msg);
catch (Exception ex)
ex.printStackTrace();
out.println("Messaging ERROR: " + ex);
out.println(stack2string(ex));
if(ex.getMessage().compareTo("")!=0)
check = "Message NOT SENT " + ex.getMessage();
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication()
return
new PasswordAuthentication("[email protected]", "pwd");
}please advice -
Logic for correcting strings with different barckets
can any one tell me the simple logic for correcting strings with different barckets
suppose say for eg.
(<{abc}>defgh) should evaluate to TRUE
(<{abc>} should evaluate to FALSE
Things to check is
1. number of opening brace and closing brace
2. Their position are correct or not
If the above two conditions are met than it is TRUE else FALSE
i guess string function with decode and lenght function or case should do but bit difficult to develop this logic in with sql
Thanks,
AAKHi,
Here is non REGEXP_REPLACE version ( Unfotunately dont have 10G to feel the power of REGEXP_REPLACE.
SQL> ed
Wrote file afiedt.buf
1 SELECT DECODE(SUM(CASE
2 WHEN Left = '(' AND Right =')' THEN 0+Count_Bracket
3 WHEN Left = '<' AND Right ='>' THEN 0+Count_Bracket
4 WHEN Left = '{' AND Right ='}' THEN 0+Count_Bracket
5 WHEN Left = '[' AND Right =']' THEN 0+Count_Bracket
6 ELSE
7 1
8 END
9 )
10 ,0,'Valid','Invalid')
11 FROM
12 (
13 SELECT SUBSTR(str,(len+1 - level),1) Left, SUBSTR(str,(len + level),1) Right, MOD(LENGTH(str),2)
14 FROM
15 (
16 SELECT
17 REPLACE(translate('&exp','abcdefgh',' '),' ') str,
18 LENGTH(REPLACE(translate('&exp','abcdefgh',' '),' '))/2 len
19 FROM DUAL
20 )
21 CONNECT BY LEVEL <= LEN
22* )
SQL> /
Enter value for exp: (<{abc>} )
old 17: REPLACE(translate('&exp','abcdefgh',' '),' ') str,
new 17: REPLACE(translate('(<{abc>} )','abcdefgh',' '),' ') str,
Enter value for exp: (<{abc>} )
old 18: LENGTH(REPLACE(translate('&exp','abcdefgh',' '),' '))/2 len
new 18: LENGTH(REPLACE(translate('(<{abc>} )','abcdefgh',' '),' '))/2 len
DECODE(
Invalid
SQL>
SQL> /
Enter value for exp: <{[()]}>
old 17: REPLACE(translate('&exp','abcdefgh',' '),' ') str,
new 17: REPLACE(translate('<{[()]}>','abcdefgh',' '),' ') str,
Enter value for exp: <{[()]}>
old 18: LENGTH(REPLACE(translate('&exp','abcdefgh',' '),' '))/2 len
new 18: LENGTH(REPLACE(translate('<{[()]}>','abcdefgh',' '),' '))/2 len
DECODE(
Valid
SQL>
SQL> /
Enter value for exp: ([{<>}])
old 17: REPLACE(translate('&exp','abcdefgh',' '),' ') str,
new 17: REPLACE(translate('([{<>}])','abcdefgh',' '),' ') str,
Enter value for exp: ([{<>}])
old 18: LENGTH(REPLACE(translate('&exp','abcdefgh',' '),' '))/2 len
new 18: LENGTH(REPLACE(translate('([{<>}])','abcdefgh',' '),' '))/2 len
DECODE(
Valid
SQL>
SQL> /
Enter value for exp: (<{abc}>defgh)
old 17: REPLACE(translate('&exp','abcdefgh',' '),' ') str,
new 17: REPLACE(translate('(<{abc}>defgh)','abcdefgh',' '),' ') str,
Enter value for exp: (<{abc}>defgh)
old 18: LENGTH(REPLACE(translate('&exp','abcdefgh',' '),' '))/2 len
new 18: LENGTH(REPLACE(translate('(<{abc}>defgh)','abcdefgh',' '),' '))/2 len
DECODE(
Valid
SQL> Note: Only thing needs to care is " translate('<{[()]}>','abcdefgh',' ') " if string has some additional characters please include here.
Regards -
I have published two different blogs with different usernames and passwords
I have published two different blogs with different usernames and passwords. When I want to publish one, it goes through the whole process of publishing the other blog as well - and takes too long.
How can I publish each blog separately?I have published two different blogs
I think you need to ask in the iWeb forum rather than this one (for iWork/Numbers):
http://discussions.apple.com/forum.jspa?forumID=1309 -
hi
i have an iphone 4s and has not been a year yet no water damage but there is a white cloudy screen around the edges and will start going crazy with different colors and all someone please gel what is wrong with it?I switched the usb port and did the whole recovery holding of the buttons ect... And it worked, the computer detected the phone and i was able to click restore. However, the computer says preparing iphone for restore and it is still doing the restarting thing where the apple fades away and then comes back like it is restarting. If i can somehow get past this i will be able to go back to factory settings and resolve my problem, but this is where i am stuck.
-
Can I sync two iPads with different users and email addresses on the same computer
Can I sync two IPads with different users and email addresses on the same computer.
yes, just make sure you turn off auto-sync to keep everything organized before you try syncing
on a pc
edit > preferences > devices - 'prevent ipads, iphones, and ipods from syncing automatically' needs to be checked
Maybe you are looking for
-
HT201335 Is it possible to use air play mirroring without an Apple TV?
Trying to find out if it's possible to do the air play mirroring with a regular HDTV? If so are there any accessories needed?
-
Web Server 6.1 Service Pack 6 released
Sun Java System Web Server 6.1 Service Pack 6 is now available for download from: http://www.sun.com/download/products.xml?id=44989742 In this SP are bug fixes, performance improvements, and certification for SUSE Enterprise Linux 9. An International
-
Can I use at command line an import dimension using table interface?
Hi guys I am using EPMA to load some dimensions using the table interface but I want to know if it is possible to lauch it using a command line? Regards
-
Inbound custom IDOC function module
I have created a custom idoc and attached a process code to it. The proceesing function module, reads values from the idoc and inserts into a database table. My question is will this function module be invoked simultaneously? If so, should I first lo
-
Problem when saving the Data basis for the Consolidation
Hi Gurus, I am having 2 problems. 1) When i try to execute the UCWB transaction . It gives an information message " Data basis DB needs to be generated (after upgrade) . I am following the procedure given in that "<b>Run maintenance of data basis DB