SSO : krb_error 6 Client not found in Kerberos Database
Hi All,
We are trying to configure SSO for Win AD user to login to infoView
OS - Windows 2003 SP2
Machine - 64 Bit
BOE - XI 3.1 + SP2 + FP2.4 (32 Bit)
CMS Database - SQL 2005 Server
Domain Controller - Not sure if is 2003 or 2008 (awaiting information from client)
While executing the kinit
kinit BOSSO/<service accont name with FQDN> <password>
its throwing a "krb_error 6 Client not found in kerberos Database."
However Manual AD is working fine.
What could be the issue here.
Thanks and Regards
Ranjit Krishnan
Edited by: Ranjit Krishnan on Mar 24, 2010 2:56 PM
client not found in kerberos DB means the KDC was located but the username was not found. There are many reasons for this
1) typo in the username or when ktpass was run
2) duplicate UPN (caused by running ktpass on 2 or more accounts)
3) ktpass was not run on the account or not successfully so the username was never changed
4) there is a bug in AD with 2008 DC's when the UPN does not = the samaccountname which will throw this message (search SAP KB's for 2008 client not found in kerberos database and you'll find the link to the Microsoft article to patch it)
Regards,
Tim
Similar Messages
-
Kinit: Client not found in Kerberos database while getting initial credentials
Hi all,
I am trying to configure application which uses Kerberos authentication.
Error message:
kinit: Client not found in Kerberos database while getting initial credentials
I use Windows Server 2003 domain controller as LDAP server, Tomcat application (on Linux) and IIS application as client, and apache load balancer.
There is multidomain environment: russia.domain.net, europa.domain.net, asia.domain.net;
Tomcat and IIS servers works behind a proxy server (Apache on Linux).
For applications created two DNS records type A. all DNS use IP address of Apache proxy server:
application-sandbox.russia.domain.net
applicationweb-sandbox.russia.domain.net
To confiure kerberos authentication i have performed the following steps:
1. Create user account in EUROPA domain and configure delegation for this:
EUROPE\application_sandbox
2. Register SPN for this account:
setspn -A HTTP/application-sandbox.russia.domain.net EUROPE\application_sandbox
setspn -A HTTP/application-sandbox EUROPE\application_sandbox
3. After i verified registered SPN for this account:
setspn.exe -L EUROPE\application_sandbox
Registered ServicePrincipalNames for CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net:
HTTP/application-sandbox
HTTP/application-sandbox.russia.domain.net
3. After i generate a keytab file:
ktpass /princ HTTP/application-sandbox.russia.domain.net:@RUSSIA.DOMAIN.NET /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass Pa$$w0rd
4. Properties of account looks like the following:
Get-ADUser -Identity appication_sandbox -Properties CN, ServicePrincipalNames, UserPrincipalName
CN : kxxb999
DistinguishedName : CN=kxxb999,OU=Users,DC=europe,DC=domain,DC=net
Enabled : True
GivenName :
Name : kxxb999
ObjectClass : user
SamAccountName : application_sandbox
ServicePrincipalNames : {HTTP/application-sandbox, HTTP/application-sandbox.russia.domain.net}
Surname : application_sandbox
UserPrincipalName : HTTP/[email protected]
4.Note that CN and User logon name are different. SPN registered for DNS record.
There are no computer in domain with name application-sandbox.russia.domain.net. this is a DNS record for application.
5. Then i copy keytab file to Linux machine, configure krb5.conf file and trying to get TGT for registered principal name.
krb5.conf file:
[libdefaults]
default_realm = EUROPE.DOMAIN.NET
dns_lookup_realm = false
dns_lookup_kdc = false
default_tkt_enctypes = rc4-hmac
default_tgs_enctypes = rc4-hmac
[realms]
RUSSIA.DOMAIN.NET = {
kdc = dc01.russia.domain.net
admin_server = dc01.russia.domain.net
default_domain = russia.domain.net
EUROPE.DOMAIN.NET = {
kdc = dc01.europe.domain.net
admin_server = dc01.europe.domain.net
default_domain = europe.domain.net
[domain_realm]
europe.domain.net = EUROPE.DOMAIN.NET
.europe.domain.net = EUROPE.DOMAIN.NET
russia.domain.net = RUSSIA.DOMAIN.NET
.russia.domain.net = RUSSIA.DOMAIN.NET
[appdefaults]
autologin = true
forward = true
forwardable = true
encrypt = true
Then i verified created keytab file:
klist -e -k -t application_sandbox.keytab
Keytab name: FILE:application_sandbox.keytab
KVNO Timestamp Principal
0 01/01/70 01:00:00 HTTP/[email protected] (arcfour-hmac)
And trying to get TGT ticket:
kinit -V -k -t application_sandbox.keytab HTTP/[email protected]
Using default cache: /tmp/krb5cc_0
Using principal: HTTP/[email protected]
Using keytab: application_sandbox.keytab
kinit: Client not found in Kerberos database while getting initial credentials
But if i use SamAccountName name with kinit commant then i can aquire TGT ticket:
[root@localhost security]# kinit application_sandbox
Password for [email protected]:
[root@localhost security]# klist
Ticket cache: FILE:/tmp/krb5cc_0
Default principal: [email protected]
Valid starting Expires Service principal
06/30/14 16:37:41 07/01/14 02:37:38 krbtgt/[email protected]
renew until 07/01/14 16:37:41
I'm in trouble. can anyone faced this problem?
Thank youHi all,
according to Amy answer I thought, how user principal could not be found in Kerberos database, e.g AD domain.
My HTTP service works in RUSSIA domain, but user principal created in EUROPE domain.
Next, i have checked my ktpass command:
ktpass /princ HTTP/[email protected] /ptype krb5_nt_principal /crypto rc4-hmac-nt /mapuser EUROPE\application_sandbox /out application_sandbox.keytab -kvno 0 /pass
Pa$$w0rd
especially the following parameters:
/princ HTTP/[email protected]
/mapuser EUROPE\application_sandbox
When generating keytab it changes userlogon name to HTTP/application-sandbox.russia.domain.net and set domain domain to RUSSIA.DOMAIN.NET
But no user principal with name application_sandbox in RUSSIA.DOMAIN.NET domain (e.g. Kerberos realm)
So solution is change RUSSIA.DOMAIN.NET to EUROPE.DOMAIN.NAME in ktpass command.
After that i am able to get TGT and authenticate in domain. -
Client not found in Kerberos database
Hi All,
I am getting Client not found in Kerberos database* when i try to a create new connection from SQL Developer 2.1.1.64 to Oracle 10G database.
I am sure that login credentials provided in connection properties are correct. pls respond, if you know the solution.
Regards,
Manoj N.Your "being sure" is overwhelmed by the evidence. The chance that you are correct and database/Kerberos is incorrect is a very small number approaching zero.
So back to basics ...
1. What is your actual database version (it is not 10g)?
2. What version of Kerberos?
3. What platform and operating system?
4. Does it work for anyone else?
5. Did it ever work before and stopped working or is this a first attempt by anyone to log on?
6. Have you turned on connection logging? If not do so. If you have post the relevant section of the log file.
7. Do you have a DBA or system or network administrator on-site?
8. Please also post the full and complete error message not your interpretation of it.
We can not help you without a thorough understanding of what is actually happening which you have not provided. -
Server not found in Kerberos database (7)
Hi!
Running the examples from
http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab
works fine for me as long as I use the Kerberos test realm I have set up on a unix machine. But when I run the same classes against our Active Directory, the client spills a stacktrace, indicating that AD can not find the server in its database. But it actually is in that database, as the sample server can perfectly authenticate as exactly that principal!
Enabling all security related debug info i could find, this is the client dump:
$ java -Djava.security.auth.login.config=jaas-krb5.conf
-Djava.security.krb5.kdc=##KDC##
-Djava.security.krb5.realm=##REALM##
-Dsun.security.jgss.debug=true
-Dsun.security.krb5.debug=true
-Djava.security.debug="logincontext,policy,scl,gssloginconfig"
GssClient host ##SERVER##
scl: getPermissions ProtectionDomain (file:/xxxxx/ <no signer certificates>)
sun.misc.Launcher$AppClassLoader@11b86e7
<no principals>
java.security.Permissions@1a46e30 (
(java.io.FilePermission \xxxxx\- read)
(java.lang.RuntimePermission exitVM)
scl:
Debug is true storeKey false useTicketCache true useKeyTab true doNotPrompt false ticketCache is nu
ll isInitiator true KeyTab is null refreshKrb5Config is false principal is xxxxx tryFirstPass is tru
e useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
KinitOptions cache name is C:\xxxxxAcquire default native Credentials
Obtained TGT from LSA: Credentials:
client=##USER##@##REALM##
server=krbtgt/##REALM##@##REALM##
authTime=20070705103930Z
startTime=20070705103930Z
endTime=20070705203930Z
renewTill=20070712103930Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is ##USER##@##REALM##
[Krb5LoginModule] authentication succeeded
[LoginContext]: login success
Commit Succeeded
[LoginContext]: commit success
Authenticated principal: [##USER##@##REALM##]
Connected to address ##SERVER##/xxxxx
xxxxx
create server name with host@##SERVER##
Search Subject for Kerberos V5 INIT cred (<<DEF>>, sun.security.jgss.krb5.Krb5InitCredential)
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Entered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for ##USER##@##REALM## to go to krbtgt/##REALM##@##REALM## expiring on Thu Jul
05 20:39:30 GMT 2007
Service ticket not found in the subject
Credentials acquireServiceCreds: same realmUsing builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType
EType: sun.security.krb5.internal.crypto.ArcFourHmacEType
KrbKdcReq send: kdc=##KDC## UDP:88, timeout=30000, number of retries =3, #bytes=1328
KDCCommunication: kdc=##KDC## UDP:88, timeout=30000,Attempt =1, #bytes=1328
KrbKdcReq send: #bytes read=101
KrbKdcReq send: #bytes read=101
KDCRep: init() encoding tag is 126 req type is 13
KRBError: sTime is Thu Jul 05 14:43:05 GMT 2007 1183646585000
suSec is 487997
error code is 7
error Message is Server not found in Kerberos database
realm is ##REALM##
sname is host/##SERVER##
msgType is 30
KrbException: Server not found in Kerberos database (7)
at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
at GssClient$GssClientAction.run(GssClient.java:171)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Unknown Source)
at Jaas.loginAndAction(Jaas.java:94)
at GssClient.main(GssClient.java:97)
Caused by: KrbException: Identifier doesn't match expected value (906)
at sun.security.krb5.internal.KDCRep.init(Unknown Source)
at sun.security.krb5.internal.TGSRep.init(Unknown Source)
at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
... 13 more
Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentia
ls provided (Mechanism level: Server not found in Kerberos database (7))
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Unknown Source)
at Jaas.loginAndAction(Jaas.java:94)
at GssClient.main(GssClient.java:97)
Caused by: GSSException: No valid credentials provided (Mechanism level: Server not found in Kerbero
s database (7))
at sun.security.jgss.krb5.Krb5Context.initSecContext(Unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
at sun.security.jgss.GSSContextImpl.initSecContext(Unknown Source)
at GssClient$GssClientAction.run(GssClient.java:171)
... 4 more
Caused by: KrbException: Server not found in Kerberos database (7)
at sun.security.krb5.KrbTgsRep.<init>(Unknown Source)
at sun.security.krb5.KrbTgsReq.getReply(Unknown Source)
at sun.security.krb5.internal.CredentialsUtil.serviceCreds(Unknown Source)
at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(Unknown Source)
at sun.security.krb5.Credentials.acquireServiceCreds(Unknown Source)
... 8 more
Caused by: KrbException: Identifier doesn't match expected value (906)
at sun.security.krb5.internal.KDCRep.init(Unknown Source)
at sun.security.krb5.internal.TGSRep.init(Unknown Source)
at sun.security.krb5.internal.TGSRep.<init>(Unknown Source)
... 13 moreWhy's AD claiming in the KRBError that it can't find a sname/realm which exactly matches the principal it accepted for the server? This totally confuses me! Can please anyone bring some light?
RegardsIt works now!!!
The exact procedure is:
- Create a new user in AD with an arbitrary name <username>. Use the same name in "User Logon Name", "User Logon Name (pre Win2K)" and "First Name" (odd, isn't it).
- Set the password, deactivate "User has to change the password at first logon", and activate "Password never expires"
- Create a mapping for the service name by entering into the command line: ktpass -princ "<protocol>/<fqdn>@<realm>" -mapuser "<username>@<realm>" -pass "*" -out dummy.keytab
- Check that the mapping is set and unique; use adsiedit.msc (Windows Support Tools).
- Now you can use the Java tool ktab to create your own keytab as usual and go.
But it is a science in its own right to correctly configure an Active Directory , especially for use with Kerberos. In particular error messages are hardly useful (as it is generally the case in the Kerberos world). It may help to read:
http://www.microsoft.com/downloads/details.aspx?FamilyID=99b0f94f-e28a-4726-bffe-2f64ae2f59a2&DisplayLang=en
and
http://www.microsoft.com/downloads/details.aspx?FamilyID=7dfeb015-6043-47db-8238-dc7af89c93f1&displaylang=en
Have fun! -
GSSAPI Error: Server not found in Kerberos database
Hi all
For about 3 days I'm now seeing this error message in system.log every 3 minutes:
DirectoryService: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
This happens on a fileserver which is connected to an OD server.
I did a search in this forum and found one thread about it. The advice there was to look in kdc.log to see which principal is failing - but I don't have a kdc.log. The other tip was to use kadmin to get a list of the principals by using
kadmin.local -q listprincs
but what I get instead of this list is:
Authenticating as principal xyz/[email protected] with password.
kadmin.local: No such file or directory while initializing kadmin.local interface
It seems that some file is missing, which would explain why DirectoryService can't find the server in the database... I have to confess that I have no idea as to how Kerberos works or how to configure it.
Authentication against the OD server is working fine, it's just that the errors in the log are getting on my nerves, and they make it difficult to find other, more important messages in system.log.
Thankas, TinaAh, I see, the kdc.log is on the OD server, not on
the file server where I was looking for it.
OK, in the kdc logfile I have a lot of entries like
these ones:
Kerberos is an auth system where the user authenticates to the kdc and is issued a TGT (Ticket Granting Ticket). The user then presents their TGT and a service principal (Kerberos name of a server) to the kdc to get a service ticket. The user then sends the service ticket to the server who lets the user in.
Some interpretation:
Mar 22 09:18:35 zool09.abc.xy krb5kdc[218](info):
TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.23:
UNKNOWN_SERVER: authtime 1143003387,
[email protected] for krbtgt/[email protected],
Server not found in Kerberos database
This (TGS_REQ) is request for a service ticket from 130.60.23.23 using the
TGT owned by [email protected], to get a service ticket for
krbtgt/[email protected]. It looks like krbtgt/[email protected] is not in your kdc's database. This looks like a cross realm request.
If you are also connected to an active directory system you might see something like this.
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
AS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
NEEDED_PREAUTH: [email protected] for
krbtgt/[email protected], Additional
pre-authentication required
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
AS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
ISSUE: authtime 1143015560, etypes {rep=16 tkt=16
ses=16}, [email protected] for
krbtgt/[email protected]
The AS_REQ's above are the two step authentication process for user [email protected] from 130.60.23.11.
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
UNKNOWN_SERVER: authtime 1143001370,
[email protected] for
krbtgt/[email protected], Server not
found in Kerberos database
This is another service ticket request. Though the requested service principal looks malformed, I would look for something misconfigured on 130.60.23.11.
Possibly watch what user zds01 is doing during login to get some idea of what's going on.
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
UNKNOWN_SERVER: authtime 1143001370,
[email protected] for
krbtgt/[email protected], Server not found
in Kerberos database
Same as above.
What do they mean? I didn't set up Kerberos
authentication, I think I don't need it, is there any
way to disable it? Or am I using it without knowing
it??
When you set up the OD Master, a kdc & the needed files were set up to allow single sign on to all the kerberized services in the system.
- see if you have an
/Library/Preferences/edu.mit.Kerberos file
- Also look for an /etc/krb5.keytab file
Yes, I have both of them.
kadmin.local -q listprincs on the OD server gives me
a long list of computers, users and services like
this:
I don't know what these all mean... could you give me
a brief explanation?
[email protected]
When you create a computer record in Workgroup Manager a generic principal name is added to the kdc for that computer. It is related to the host/computer_name@REALM service principal for servers.
[email protected]
This is a user principal (this is the account name for the user in the Kerberos system) Sometimes you will see user/admin@REALM.
afpserver/[email protected]
This is a service principal. They usually are in the form servicetype/server_dnsname@REALM
One of the things that Kerberos is very sensitive to is correct DNS configuration. You need to have both forward (name -> IP) and reverse (IP -> name) DNS set up for all the servers in your realm.
Hope this helps
- Leland
DP G4 Mac OS X (10.4.5) -
Kerberos client not found-help! can't print!
I am posting this to the benefit of all who may have experienced the "Kerberos client not found" message after configuring CUPS for Kerberos authentication. After getting locked out of CUPS and not being able to add or delete printers I found in another google-search post a solution.
I edited the /etc/cups/cupsd.conf file using a terminal editor (vi) and changed the entry:
"DefaultAuthType Negotiate" to "DefaultAuthType Basic", then restarted the server and all worked fine after that, although I still haven't figured out what the problem is with CUPS and Kerberos interaction.
I hope this helps someone as I spent about a day and a half trying to figure out a solution.
CiaoHello Sapo11,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Submit a SAP job and it is erroring out as "instance/client not found"
I am trying to submit a SAP job and it is erroring out as "instance/client not found"
as soon as I enter the instance/client value and click on next I am getting this error
please helpHi,
Then maybe there is a problem with another parameter, and the error is obscured by this error message.
You did specify valid values for all other parameters ?
Maybe you can try the following:
- create a simple job in SAP, you do not have to execute it only save it
- import this job using RSI_IMPORT_CCMS_JOBS and specify the exact job name
- run the imported job (it will have the same name as in SAP) and see if this works
- if this works, try your job again directly from CPS and compare your parameters with those on the imported job (especially which ones are filled or not filled, that sometimes is more important than the exact value chosen)
Regards,
Anton. -
System attribute "Client" not found.
I try to setup connection to my BW and R/3, and still not able to make it work.
And i have map the user id too.
fro the support menu ->system landscape cockpit , i do these :
Check for launching WinGUI and PlatinGUI transactions
System attribute "Client" not found.
Error in the connection data for launching WinGui and PlatinGui transactions.
--> found MessageServer=192.168.5.61
Test failed.
Skipping test for WebGUI transactions, Easy Web Transactions and BW 2.x objects
Check for launching BSP and BW 3.x objects
System attribute "Client" not found.
No protocol defined for the WebAccessPoint.
The host name for the WebAccesPoint has no value.
Test failed.
Is is suppose to be this painfull to setup connection to SAP system ?
Thank you very much..Hi,
First answer to you question is: Not at all.
Follow the below steps to create R/3 system.
1. Create R/3 system in the System Adminstration->System Configuration by choosing R/3 Connect via Connection String.
2. Then enter the following properties.
Connection String to Application : <Application server>
Logon Method : <UIDPW>
SAP Client: <clinenumber>
SAP System ID:
SAP System NUmber:
System Name:
System Type:
3.Create System Alias
4.User Mapping
5. Test Connection.
Thanks,
Ramakrishna -
Drive not found in library database
Greetings.
I'm new to OSB and am having tape drive, volume problems.
File system backups only complete successfully when drive (IBM4_0_0_1_1) is used. When OSB attempts to use other drives in the library it logs the following errors listed in "Transcript".
I'm running OSB (10.4.0.3.0) on a Linux server (Oracle Linux Server release 6.0) with a SL500 library controller by a ACSLS(8.3.0) server.
Please advise.
Transcript:
2014/04/23.11:44:01 ______________________________________________________________________
2014/04/23.11:44:01
2014/04/23.11:44:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:44:01
2014/04/23.11:44:01 ---
2014/04/23.11:44:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.11:44:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.11:44:01 drive not found in library database (library manager)
2014/04/23.11:45:01 ______________________________________________________________________
2014/04/23.11:45:01
2014/04/23.11:45:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:45:01
2014/04/23.11:45:01 ---
2014/04/23.11:45:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.11:45:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.11:45:01 drive not found in library database (library manager)
2014/04/23.11:46:01 ______________________________________________________________________
2014/04/23.11:46:01
2014/04/23.11:46:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:46:01
2014/04/23.11:46:01 ---
2014/04/23.11:46:01 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.11:46:01 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.11:46:01 drive not found in library database (library manager)
2014/04/23.11:48:01 ______________________________________________________________________
2014/04/23.11:48:01
2014/04/23.11:48:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:48:01
2014/04/23.11:48:01 ---
2014/04/23.11:48:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.11:48:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.11:48:01 drive not found in library database (library manager)
2014/04/23.11:49:01 ______________________________________________________________________
2014/04/23.11:49:01
2014/04/23.11:49:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:49:01
2014/04/23.11:49:01 ---
2014/04/23.11:49:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.11:49:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.11:49:01 drive not found in library database (library manager)
2014/04/23.11:50:01 ______________________________________________________________________
2014/04/23.11:50:01
2014/04/23.11:50:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.11:50:01
2014/04/23.11:50:01 ---
2014/04/23.11:50:01 No volume could be found in SL500 (for drive HP5_0_0_2_3) to use for job admin/83.1.
2014/04/23.11:50:01 The problem using HP5_0_0_2_3 and the volume it contains, if any, is
2014/04/23.11:50:01 drive not found in library database (library manager)
2014/04/23.12:00:01 ______________________________________________________________________
2014/04/23.12:00:01
2014/04/23.12:00:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:00:01
2014/04/23.12:00:01 ---
2014/04/23.12:00:01 No volume could be found in SL500 (for drive HP6_0_0_3_1) to use for job admin/83.1.
2014/04/23.12:00:01 The problem using HP6_0_0_3_1 and the volume it contains, if any, is
2014/04/23.12:00:01 drive not found in library database (library manager)
2014/04/23.12:01:01 ______________________________________________________________________
2014/04/23.12:01:01
2014/04/23.12:01:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:01
2014/04/23.12:01:01 ---
2014/04/23.12:01:01 No volume could be found in SL500 (for drive HP5_0_0_2_4) to use for job admin/83.1.
2014/04/23.12:01:01 The problem using HP5_0_0_2_4 and the volume it contains, if any, is
2014/04/23.12:01:01 drive not found in library database (library manager)
2014/04/23.12:01:24 ______________________________________________________________________
2014/04/23.12:01:24
2014/04/23.12:01:24 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:01:24
2014/04/23.12:01:25 ---
2014/04/23.12:01:25 No volume could be found in SL500 (for drive IBM5_0_0_1_2) to use for job admin/83.1.
2014/04/23.12:01:25 The problem using IBM5_0_0_1_2 and the volume it contains, if any, is
2014/04/23.12:01:25 drive not found in library database (library manager)
2014/04/23.12:04:01 ______________________________________________________________________
2014/04/23.12:04:01
2014/04/23.12:04:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:04:01
2014/04/23.12:04:01 ---
2014/04/23.12:04:01 No volume could be found in SL500 (for drive HP4_0_0_2_2) to use for job admin/83.1.
2014/04/23.12:04:01 The problem using HP4_0_0_2_2 and the volume it contains, if any, is
2014/04/23.12:04:01 drive not found in library database (library manager)
2014/04/23.12:05:01 ______________________________________________________________________
2014/04/23.12:05:01
2014/04/23.12:05:01 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:01
2014/04/23.12:05:01 ---
2014/04/23.12:05:01 No volume could be found in SL500 (for drive IBM5_0_0_2_1) to use for job admin/83.1.
2014/04/23.12:05:01 The problem using IBM5_0_0_2_1 and the volume it contains, if any, is
2014/04/23.12:05:01 drive not found in library database (library manager)
2014/04/23.12:05:21 ______________________________________________________________________
2014/04/23.12:05:21
2014/04/23.12:05:21 Transcript for job admin/83.1 running on x4440a
2014/04/23.12:05:21
Backup started on Wed Apr 23 2014 at 12:05:51
Volume label:
Volume tag: LEV018
Volume UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Volume ID: mf_2min-000025
Volume sequence: 1
Volume set owner: root
Volume set created: Wed Apr 23 12:05:51 2014
Volume set expires: Wed Apr 23 12:07:51 2014
Media family: mf_2min
Original UUID: 203f144a-ad72-1031-9e4c-002128001bbe
Archive label:
File number: 1
File section: 1
Owner: root
Client host: x4440a
Backup level: 0
S/w compression: no
Archive created: Wed Apr 23 12:05:51 2014
Encryption: off
Dumping all files in /etc
Backup complete on Wed Apr 23 2014 at 12:06:03
Backup statistics:
status 0
devices IBM4_0_0_1_1
devices 1
volumes mf_2min-000025
voltags LEV018
file 1
host x4440a
encryption off
start_time Wed Apr 23 2014 at 12:05:51 (1398276351)
end_time Wed Apr 23 2014 at 12:06:06 (1398276366)
backup_time Wed Apr 23 2014 at 12:05:51 (1398276351)
entries_scanned 3373
kbytes_scanned 40556
entries_excluded 0
entries_skipped 0
mount_points_skipped 0
files 2047
directories 315
hardlinks 0
symlinks 1011
sparse_files 0
filesys_errors 0
unknown_type 0
file_kbytes 39264
dev_kbytes 35977
dev_iosecs 2
dev_iorate 18.4 MB/S
wrt_iosecs 15
wrt_iorate 2.5 MB/S
physical_blks_written 1102
write_errors 0
physical_blks_read 2
read_errors 0
error_rate 0%
path /etc completed, status 0
[root@x4440a backup]# obtool lsdev -lvg
SL500:
Device type: library (ACSLS)
In service: yes
Debug mode: no
Barcode reader: yes
Barcodes required: yes
Unload required: yes
Ejection type: auto
Min writable volumes: 0
UUID: e0b58224-a1a4-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
ACSLS server: v215f
ACSLS port: 0
ACS id: 0
ACSLS access id: acsss
Reservation 1:
Component: obacslibd
Host: x4440a
Process: 32195
Element counts / addresses:
10 mte: 1 - 10
281 se : 1 - 281
1 iee: 1
1 dte: 1
Moves:
From mte, to: mte 0 se 0 iee 0 dte 0
From se, to: mte 0 se 0 iee 1 dte 1
From iee, to: mte 0 se 0 iee 0 dte 0
From dte, to: mte 0 se 1 iee 0 dte 0
Ok_ops: move=1, reserve=1 sense_dev=1, sense_ele=0, unload_any=1, sense_dev_range=0
State of barcode reader: enabled
IBM4_0_0_1_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: 14 minutes, 58 seconds
UUID: 179eb954-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg18
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD4
Firmware: C7Q0
Serial number: 1310127325
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_2_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 7498ff66-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg16
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1168002114
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP6_0_0_3_1:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 3
Drive: 1
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: cd20d3fc-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg21
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 6-SCSI
Firmware: J39S
Serial number: HU1233PPNN
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
IBM5_0_0_1_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 1
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 5b6cf420-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg15
Connection type: SCSI
Inquiry data:
Vendor: IBM
Product: ULTRIUM-TD5
Firmware: D8D4
Serial number: 1068002447
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
HP4_0_0_2_2:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 2
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 8bd3659a-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg13
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 4-SCSI
Firmware: H64S
Serial number: HU1803168E
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_3:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 3
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: 9ee7dbd4-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg23
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NFE
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: not available
Maximum block size: 2097152
HP5_0_0_2_4:
Device type: tape (ACSLS)
In service: yes
Library: SL500
LSM: 0
Panel: 2
Drive: 4
Automount: yes
Error rate: 8
Query frequency: 131072KB (134217728 bytes) (from driver)
Debug mode: no
Blocking factor: (default)
Max blocking factor: (default)
Current tape: [unknown]
Drive usage: [not set]
UUID: b45b889e-a1a5-1031-8c0f-002128001bbe
Attachment 1:
Host: x4440a
Raw device: /dev/sg24
Connection type: SCSI
Inquiry data:
Vendor: HP
Product: Ultrium 5-SCSI
Firmware: I67S
Serial number: HU19477NBF
Tape state: offline
Hardware compression: on
Last read was: uncompressed
Hardware encryption: available
Maximum block size: 2097152
[root@x4440a backup]#
[root@x4440a backup]# obtool lsvol -L SL500 -l
Inventory of library SL500:
in 1: barcode F50216, oid 100
in 2: barcode I50116, oid 101
in 3: barcode LEV008, oid 102, mediainfo hw encryptable
in 4: barcode LEV010, oid 103, mediainfo hw encryptable
in 5: barcode LEV017, oid 104, mediainfo hw encryptable
in 6: volume mf_2min-000025, barcode LEV018, oid 155, 781232128 kb remaining, expired, mediainfo hw encryptable
in 7: barcode LEV049, oid 106
in 8: barcode LEV058, oid 107
in 9: barcode PQ4196, oid 108
in 10: barcode PQ4883, oid 109
in 11: barcode S50282, oid 110
in 12: barcode S50290, oid 111
in 13: barcode S50291, oid 112
in 14: barcode S50292, oid 113
in 15: barcode S50300, oid 114
in 16: barcode S60111, oid 115
in 17: barcode S60113, oid 116
in 18: barcode SF6410, oid 117
in 19: barcode SF6411, oid 118
in 20: barcode SF6412, oid 119
in 21: barcode SF6413, oid 120
in 22: barcode SF6414, oid 121
in 23: barcode SF6416, oid 122
in 24: barcode SF6417, oid 123
in 25: barcode SF6418, oid 124
in 26: barcode SF6419, oid 125
in 27: vacant
in 28: vacant
in 29: vacant
in 30: vacant
in 31: vacant
in 274: vacant
in 275: vacant
in 276: vacant
in 277: vacant
in 278: vacant
in 279: vacant
in 280: vacant
in 281: vacant
in iee: vacant
in dte: vacant
[root@x4440a backup]#Rich
Thanks for your response.
ACSLS is part of the configuration requirements I need to have in this OBS environment.
I'm going to re install OBS just to see if anything changes.
Thanks again.
Update:
When configuring devices in OSB that are ACSLS in nature it is a requirement to restart the obacslibd after mkdev or certain chdev commands are preformed.
After the daemon was restarted I was able to use the attached tape drives. -
This procedure name is not found in the database: wwv_flow.show
I created an interactive report, which works fine in the APEX developer, using the Application Express Authentication scheme.
To add it to our Self-Service web system, I change the authentication scheme to a custom scheme that has been working fine for other applications, although I don't know of any other interactive reports using this scheme in Self-Service.
Anyway, the interactive report is displayed in our Self-Service system using the custom authentication scheme, but if I display the Action menu and click on one of the options (Filter, Sort, Compute...), a pop-up window is displayed saying:
This procedure name is not found in the database:
wwv_flow.show
That error is also displayed when I try to edit the displayed filters.
Does anyone know why I might be getting that error or have suggestions on things to try to track it down?
Thanks,
LauraLaura,
To add it to our Self-Service web systemWhat does that mean? What did it entail?
I'm thinking maybe you embedded some relative links into a menu system in which the base href was not appropriate, ... or something.
Scott -
File not found error after database migration
Hi experts
I recently decided to create a test environment for SharePoint 2010 production server but after
attach the content database using power shell successfully I get “ file not found “ error when I try to login the top site collection
I think it’s because of customized master page in production site which I don’t know how to apply them to my new environment.I even tried to copy the master pages from cataloge throught SPD but it didnt work.
Any assistance would be greatly appreciatedHI Shahin,please try to access the site by below and let me know the result.please check the below link that gives more idea on the issue
_/_layouts/settings.aspx
/_layouts/viewlsts.aspx
/default.aspx
http://expertsharepoint.blogspot.de/2014/01/sharepoint-default-page-not-loading-by.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Dump : Table not found in oracle database
Hi,
I am doing a program regarding analysis of tables belonging to archiving objects.In my program i am calling a RFC function module . 'DB02_ORA_TABLE_INDEX_ANALYSIS . But it is giving the dump for native sql statement .
--- Oracle block size ----------------------------------------------
exec sql.
select value from v$parameter where name like 'db_block_size%'
into :block_size
endexec.
Dump is table not found in database.
Could please let me know what setting i am missing...
Thanks in advance.....
SudhakarHi,
the view V$PARAMETER must be accessed through SAP/Oracle Database Monitor lets you view the active Oracle database parameters and the contents of the init.ora file.
Alternatively, you can use transaction st04. You need to apply SAP Note 706927 before using the database monitor.
Hope this information is help to you.
Regards,
José -
Table "StoredProcedure" not found when changing Database location in VS 2005.
<p>I'm having a problem changing the datasource location when generating a report using the report viewer in VS2005. If the table is a stored procedure, I get the message "Table (StoredProcedureName) not found", but if the report references tables rather than a stored procedure the location is changed and the report runs successfully. The same problem was reported in earlier versions of Crystal Reports and was fixed in a service pack, but I couldn't find any documentation on the VS2005 version. </p><p>Does anybody know how to fix this problem? I am using CrystalDecisions.CrystalReports.Engine.dll version 10.2.3600.0 and SQL Server 2000.</p>
Peggy, I wonder if getting the latest SP for CR 10.2 will be better for now. SP 1 can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
I\Let us know if that does not resolve the issue and we'll take a closer look before going all the way to CR XI.
With regards,
Ludek -
Host Configuration not found error in database control
I have freshly installed Oracle DB 11g and a starter database.
Then i went to emctl (database control), at the home tab, I noticed the status is up (Green up arrow icon) but the "Instance Name", "Version", "Up Until" entries have the value "unknown"
And then when i Click on the "view all properties link", I noticed that the ORACLE_HOME entry has a warning icon after the entry. Then when you click on the ORACLE_HOME entry link, I get a page saying
Host Configuration not found. Check to see if the target exists.Whats happening? Did I miss something in my installation?
regards,
AntonWhat is the OS?. Have you seen the Metalink note: 353681.1
Subject: Problem: Click on ORACLE_HOME gets "Host Configuration not found. Check to see if the target exists"
Doc ID: 353681.1 Type: PROBLEM
Modified Date : 30-JUL-2007 Status: PUBLISHED -
Oracle.DataAccess.Client not found[SOLVED]
Hello,
I am trying to run a stored procedure using C# and I need to use the Oracle.DataAccess.Client but when i enter
"using Oracle.DataAccess.Client;" visual studio throws the error:
Error 1 The type or namespace name 'Oracle' could not be found (are you missing a using directive or an assembly reference?) P:\data\ActionItemLog\ActionItemLog\updateComment.aspx.cs 14 7 ActionItemLog
And I installed the newest ODTwithODP for .NET. I would really like some help on this subject and I will do my best to clarify even more if needed.
Thanks in advance,
Dylan
Message was edited by:
dkroyJust a stupid mistake on my part all I had to do is in visual studio add the Oracle.DataAccess.dll file to references. I hope this mistake saves some one a bit of time in the future.
Maybe you are looking for
-
I have iphone4 ,Imade a restore for it while activation the divec but unfortunately I forgot the password for the I cloud I tried to reset the password , but it reset for me the password for the apple Id I tried to sign in throw PC many times , then
-
Hi! I would like to report an issue in "Top Contacts" Android app https://play.google.com/store/apps/details?id=com.sonyericsson.androidapp.smart I don't know where I should report, so I decided to do it here The problem is that contact sync is broke
-
SDK Acrobat 3D!!!!!
Prompt please where to download sdk Acrobat 3D Developer (for export x-files into PDF, C++, C#)
-
How do i restore my itunes to my laptop which runs on Windows Vista Basic?
I had to reload my system yesterday, and the only thing left to do it put my itunes from my ipod to my library. I could do it with my eyes shut for my old windows xp OS but as its vista i have kinda lost my way. So if there a link on here somewhere f
-
Effectively blocking Bit Torrent
I am using BackTrack 5 to help monitor Bit Torrent since I have been completely ineffective in blocking it via my Cisco 5505 Firewall. I have now seen several outbound TCP connections with the connection being to my firewall's IP address. I am a ro