SSO - support version 1.1 of the SAML

Hello,
I am reading over a Oracle white pages for SSO and it makes this following statement.
"In order for a customer to implement Single Sign-On with the Siebel CRM On
Demand environment, the customer’s on-premise identity management and
federation infrastructure must, at a minimum, support version 1.1 of the SAML
standard."
I have asked around a few people within the company and no one really seams to know what this is. Do we need to get some software to support version 1.1? Or is anyone able to tell me more about this statement.

I'm on XP and have the same 1417 error. In addition, my ipod is ejecting when I select "update" or "restore" (I have disk use enabled so I normally have to manually eject after syncing). The next time I reconnect my nano to the computer, XP recognizes it, but not iTunes. If I remove and reconnect again, I'm back to square one.
Windows XP Pro

Similar Messages

Required components for Forms&Reports 11.1.2 with SSO support

Hi.
Dont know if this is the right forum but I would like to know if any of you has an experience in integrating Forms&Reports 11.1.2 with Oracle Access manager.
I am in process of upgrading Oracle Forms&Reports 10g configured to use single sign-on to 11.1.2 with Identity and Access management for SSO support. As I read the installation manual I got confused by how to integrate Forms&reports with Access manager to be able to configure it to use single sign-on with MS Active Directory authentication. I am not sure is there enough just to install Access Manager or the installation also requires Identity Management component.
I would appreciate if one could point me to the right direction. Thanks.
Best regards.

I recommend starting with baby steps. First ensure that the FMw installation is working. Can you run a form, and report, and so on. Then add single-signon with OAM. Verify that it is working. Then add AD support. If you try to dive directly into making AD work and something before this step wasn't working, you will have a difficult time troubleshooting.
Generally speaking, if you have OAM and SSO installed prior to installing FMw, connecting the two is fairly easy because the FMw installation will prompt you during the process. However, even after the fact, linking up can be done from within the EM console even though some external steps may be needed. Once this is working, they you can investigate adding AD to the mix.
If you already have OAM installed, you are ready to dive into the Forms Deployment Guide.
http://docs.oracle.com/cd/E24269_01/doc.11120/e24477/sso.htm
This part of the Deployment Guide will cover things like, which versions of the Identity Management components can be used with Forms/Reports 11.1.2. It will also discuss the functional information need in order to understand how it all works together. Also included are instructions on how to connect the FMw installation to sso. Be careful as you read any of the documents as it is easy to get confused when seeing references to "SSO". In some cases, the term "sso" means single signon and in others it is referring to the product, "Oracle SSO".
Information about using Active Directory is scattered around the IM documentation, but this is probably a good place to start:
http://docs.oracle.com/cd/E23943_01/oid.1111/e10031/odip_actdir.htm

SAP NetWeaver CE 7.1 EHP1 does not support version 1.5 JCA?

Hi,
I've been following the documentation of SAP NetWeaver CE 7.1 EHP1 regarding creation of a version 1.5 resource adapter. When I finally got to "Add/Remove projects" in the server view to test my adapter, I get this error:
The server does not support version 1.5 of the J2EE Connector module specification
Is this true? Then why does the documentation explain how to do it?
Regards,
Johan

>
Johan Hoogenboezem wrote:
> Hi Yordan
> No it is this one: [http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm|http://help.sap.com/saphelp_nwce711/helpdata/en/44/edb79d7f7303fde10000000a1553f6/content.htm]
>
> I'm used to the tuturials spelling out the creation of the application project whereas point 3 (c) of "Creating a Connector Project"
> on that page does not make it clear that an application project is needed. Usually there is a separate heading for that, like
> "Creating the application project". It seems silly, now, but at the time that is how I interpreted it.
> Regards,
> Johan
Hi Johan,
I agree with you that this does not seem clear enough throughout the Resource Adapters documentation.
Generally speaking about the Developer Studio, there are two equivalent options to add your project (be it JCA, EJB, Web, JPA, etc.) to an EAR project:
While creating your project, you can specify that you want it to be added to an EAR project - either a new one or an existing one (you can create the new EAR project also in the meantime, while creating your JCA project). This is done using the "Add your project to an EAR" checkbox and the relevant dropdown list and button...
Create your project. Then create a new EAR project and specify which projects you want to be included in the EAR.
As I promised, we will improve that part of the documentation for the next release.
Thanks again, and best regards,
Yordan

When will Mozilla no longer support version 3.6?

Using Salesforce.com as business platform. They do not support a version of Firefox over 3.6. As advertised Mozilla will no longer support version 3.6 in the near future. Need to know which version will be supported by both Salesforce & Mozilla.

Support for Firefox 3.6 will extend into 2012, until a Firefox ESR ''(Extended Support Release)'' version comes out. You'll need to check with Salesforce to find out what their plans are for supporting newer versions of Firefox.

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Why will not Mozilla-Firefox not open in the version 3.5.16? The schoolonly supports version 3.0

My question is why does Mozilla Firefox version 3.5.1.6 not work when it always had in the past since 2009 approximately.
The only thing different is that I did purchase Norton 2011 then upgraded to Norton 2012 Anti-Virus Protection Suite.
The School I go to will only support Version 3.0 Firefox. I have installed the version 7.0 from your sight by clicking download. I used the older version 3.5.1.6 on my laptop as well with no problems but now it won't work and they both crash. I have clicked on send reports but no answers yet. The laptop as well as my desktop had viruses from a server that I used which I found out had two computers which weren't virus protected with current updated signatures. This was McAfee "Total Protection Suite" which did not give me any protection at all and this is what happened, and it should have at least blocked me from getting onto the Internet through the server. I only used this server as a gateway only. I never had this problem with AVG Protection Anti-Virus Suite, but then I changed to McAfee, which the server uses, and this is when all my problems started because two computers on this network were not protect with updated virus signatures. The viruses crashed my Laptop and almost my desktop as well. I ran Norton and this took care of the problem on my desktop and then I ran Malwarebytes and Hitman both Virus Scanners and removed all 53 viruses, PUPS, and other Malware.
I reinstalled both of the Mozilla Firefox version 3.5.2.6 and I got the message that said sorry the browser crashed and click OK to send a report to Firefox which I did. I can't start school without Mozilla Firefox as the School only supports Firefox 3.0. As I had corrupted files from the problems with all the Malware and I have resolved most of the issues now except that I will have to upgrade to Windows 7 "Home Premium" and I am working with Dell Tech. Support with this and trying to complete as much as possible before I call them back.
Will I be able to use the older version and is Norton 2012 the program causing the older versions not to work?

You can install the portable Firefox 3.6.x version, that comes with its own profile, to access websites that do not work with Firefox 5+.
*http://portableapps.com/apps/internet/firefox_portable#legacy
*http://portableapps.com/apps/internet/firefox_portable/localization#legacy36
You probably need to create a new profile because the SQLite version used in Firefox 3.5 is not compatible the the SQLite version that is used by current Firefox versions.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
if anyone can help that would be great
CS J

You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

Sun Studio (12,1) is unable to find a supported version of the Netbeans IDE

Hi all,
We're working on upgrading both the hardware and software on our application currently, and part of this involves upgrading our compiler to Sun Studio 12.1. I downloaded
SunStudio12u1-SunOS-SPARC-pkgs-ML.tar.bz2
from the Sun website and we installed it into the following location on our server:
/opt/compiler/sunstudio12.1
I successfully compiled all my code using the compiler, however, when I try to launch the debugger by typing ./sunstudio in the 'bin' directory, I get the following error:
{opt/compiler/sunstudio12.1/bin}./sunstudio
Sun Studio is unable to find a supported version of the NetBeans IDE.
Sun Studio requires a NetBeans IDE version 6.5.1 with NetBeans C/C++ module (cnd
2) enabled.
Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/compiler/sunstudio12.1/netbeans
I have seen references to executing 'prepare_system' on forums while I was trying to investigate this, but when our sys admin folks try to execute the command, it does not work (command not found). They've mentioned that they expected a prepare_system script in the directory where we untarred the downloaded sun studio tarfile, but it is not there:
drwxrwxr-x 4 59001 staff 1024 Aug 20 2009 .
drwxr-xr-x 3 yu12 lifecad 1024 Jul 2 09:48 ..
drwxrwxr-x 4 59001 staff 1024 Aug 17 2009 LEGAL
-rw-rw-r-- 1 59001 staff 3985 Aug 19 2009 SS12u1_README-pkgs.txt
-rw-r--r-- 1 59001 staff 5598 Aug 20 2009 SS12u1_README-pkgs_ja.html
-rw-r--r-- 1 59001 staff 4155 Aug 20 2009 SS12u1_README-pkgs_zh.html
-rwxrwxr-x 1 59001 staff 517979136 Aug 6 2009 SunStudio12u1-SunOS-SPARC-pkgs.sh
-rwxrwxr-x 1 59001 staff 11814 Aug 6 2009 install_patches.sh
drwxrwxr-x 5 59001 staff 96 Aug 17 2009 patches
I can see a netbeans directory was created as part of the install, but I'm not sure why sun studio thinks netbeans is not available (afraid my knowledge about netbeans is practically non existent):
{opt/compiler/sunstudio12.1/netbeans}ls -l
total 6062
drwxr-x--- 2 root root 512 Apr 5 11:14 bin
drwxr-x--- 7 root root 512 Apr 5 11:14 cnd2
-rw-rw-r-- 1 root root 5254 Mar 5 2009 CREDITS_ja.html
-rw-rw-r-- 1 root root 5175 Mar 5 2009 CREDITS_pt_BR.html
-rw-rw-r-- 1 root root 4908 Mar 5 2009 CREDITS_zh_CN.html
-rw-rw-r-- 1 root root 5434 Mar 5 2009 CREDITS.html
-rw-rw-r-- 1 root root 1717 Mar 5 2009 DISTRIBUTION.txt
-rw-rw-r-- 1 root root 0 Aug 6 2009 dummy
drwxr-x--- 2 root root 512 Apr 5 11:14 etc
drwxr-x--- 7 root root 512 Apr 5 11:14 gsf1
drwxr-x--- 6 root root 512 Apr 5 11:14 ide10
-rw-rw-r-- 1 root root 1845 Mar 5 2009 LEGALNOTICE.txt
-rw-rw-r-- 1 root root 64275 Mar 5 2009 LICENSE.txt
-rw-rw-r-- 1 root root 37141 Mar 5 2009 moduleCluster.properties
drwxr-x--- 7 root root 512 Apr 5 11:14 nb6.5
-rw-rw-r-- 1 root root 15822 Mar 5 2009 netbeans.css
drwxr-x--- 8 root root 512 Apr 5 11:14 platform9
-rw-rw-r-- 1 root root 6141 Mar 5 2009 README_ja.html
-rw-rw-r-- 1 root root 5692 Mar 5 2009 README_pt_BR.html
-rw-rw-r-- 1 root root 5122 Mar 5 2009 README_zh_CN.html
-rw-rw-r-- 1 root root 5155 Mar 5 2009 README.html
-rw-rw-r-- 1 root root 2913280 Mar 5 2009 THIRDPARTYLICENSE.txt
drwxr-x--- 5 root root 512 Apr 5 11:14 websvccommon1
Our server details are:
{opt/compiler}uname -a
SunOS a03714 5.10 Generic_142900-03 sun4v sparc SUNW,T5440
Any advice appreciated on how to get the debugger working. Ideally, I'd prefer not to uninstall / reinstall if at all possible as we're about to start system testing our executables, and I think a reinstall would require more unit teting and delays to our project (yikes!). But any input would be appreciated here.
Thanks,
Brendan.

Hi David,
First off - thanks for the response. I do have some follow up questions if you don't mind though:
1. When you say the install is corrupted, do you suspect
- the file I downloaded from the website either was corrupted, or was not the correct file for my platform
- the procedure used to install the software was incorrect
- something else
2. Is there a logfile that the sun studio install creates which would indicate an error during the installation procedure? I'm sure our admins who performed the install would have shouted if an error was logged... but on the offchance that the installation does not 'shout loudly' for some errors, I'd like to see a log of the error. At a minimum, I'd expect it to say why the install failed, and what we need to modify to ensure a successful install next time 'round.
3. I successfully compiled my code using the C compiler from the install. My unit tests also look good... does this suggest that the install was at least a partial success, and would you suspect that my recompiled executables are reliable, despite the fact that I cannot launch the IDE?
4. Today, one of our admins telnetted to our unix server - not via exceed by the way, but he did try the following test:
- set his display env variable (he knew he would not get a display however)
- executed the sunstudio script
He did not get the netbeans error, and the process appeared to be running (as I mentioned, without a display) until he killed it. I've asked if they can repeat the test using an exceed session. I thought there may be something on his $PATH that I did not have - unfortunately this was not the case (although, he may have access as 'root' to something that I require to launch the IDE). My question is, would you expect this behaviour if the install was corrupted?
Let me know what you think.
Thanks,
Brendan.

When i plug in my new ipad, in my windows 7 computer. It tells me to remove Itunes and install the 64-bit version. but it is the 64 bit. version i have installed. i tried it 3 times now. I downloadet from the Apple support site, with 64bit.?? help

When i plug in my new ipad, in my windows 7 computer. It tells me to remove Itunes and install the 64-bit version. but it is the 64 bit. version i have installed. i tried it 3 times now. I downloadet from the Apple support site, with 64bit.?? help

did you solve this problem?

How to know the latest version of NWDS that the portal supports.

Hi All,
How to get to know the latest version of NWDS that the portal supportsu2026 I mean if a patch r support package is applied to the server, then it would support higher version of NWDS. How do we get to know which is that latest NWDS version?
Thanks,
Shilpa.

Hi Shilpa,
Your NWDS patch should not be higher than portal patch number.U can find ur portal version and patch in
http://<host>:port/index.html-> system information>software components.
Regards,
Sri

Our CMS does not support new version of Firefox. Can I have the "downgraded" version of Firefox AND the upgraded Firefox both on my Mac, so I can use the older Firefox to manage my CMS?

Essentially, the CMS we use to manage our website (mainstreetartsfest.org) is Sitefinity, and apparently it doesn't support the newest version of Firefox. And, from what I understand, this version of Sitefinity is not being upgraded at the support level - we are now being asked to spend $$ on moving to a new CMS to support the browsers. Chrome, Safari also a problem. Only IE works, and we all have Macs. I want to know if we can have the older Firefox AND the upgraded Firefox both on our computers so we can use the new Firefox for general browsing, and resort to the older, 3.2 version for managing the CMS. I know I can download a previous version - but I would rather not replace our new version of Firefox in the process.

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Error: The domain in this directory is not a supported version.

I am using configure utility in workshop to select the appropriate domain. The domain has been created with weblogic 8.1 I get following errors:
The domain in this directory is not a supported version.
any idea, why am i getting this error?
Thanks,
Ashish

Hello Jun,
Did the suggestion of adding stuff into config.xml file ("<Domain Name="fo_testdomain" ConfigurationVersion="8.1.3.0"> in your config.xml
") resolved your problem. If not , then do open a support ticket to know more about CR173024 and CR133495.
Following is the summary of CR173024.
WLS 81 SP2 - Configuration wizard fails with "The domain in this directory is not a supported version".
Hope it helps.
Kuldeep

Sun Studio is unable to find a supported version of the NetBeans IDE at the

I'm following the system install instructions in the Grid Compute Utility guide, Appendix A "Building a Local Development Environment" and am getting stuck on step 4, installing sunstudio. I'm running Solaris 5.10 on x86 and can run netbeans IDE without problem. Here is some info, I'm not sure what other system info is relevant:
bash-3.00# which netbeans
/opt/netbeans-5.5.1/bin/netbeans
bash-3.00# which sunstudio
/usr/bin/sunstudio
bash-3.00# sunstudio
Validating NetBeans IDE at: "/opt/SUNWspro/../netbeans-5.5.1"
Sun Studio is unable to find a supported version of the NetBeans IDE at the specified location.
Sun Studio requires a NetBeans IDE version 5.5.1 with NetBeans C/C++ Development Pack version 5.5.1
installed. Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/netbeans-5.5.1 location, if exists
3) At /opt/SUNWspro/../netbeans-5.5.1 location, if exists
4) At /opt/SUNWspro/../../netbeans-5.5.1 location, if exists
Please run the System Preparation Tool (prepare_system), if available, to set up your environment.
Any help!?

Did you install NetBeans separately or let Sun Studio installer do it? The latter usually results in working configuration.
I think that NetBeans installation simply doesn't have c++ pack; you can install one following usual NetBeans modules installation path and then re-try starting Sun Studio.
Another option is to uninstall NetBeans and re-install Sun Studio using its installer, which should set up NetBeans properly.

I need to download a eariler version of firefox because the latest version is not supported by my financial institutions or colleges im attending, every time i look for 3.6 im redircted to the 4.0 download

I need to download a eariler version of firefox because the latest version is not supported by my financial institutions or colleges im attending, every time i look for 3.6 im redircted to the 4.0 download

http://www.mozilla.com/en-US/firefox/all-older.html

What is the supported version of Oracle Enterprise Quality Data for WebLogic 12c

Hi All,
The recent release of Oracle Enterprise Data Quality is 11.1.1.6.1 for which supported weblogic server is WebLogic 10.3.6
Can anyone tell me that if WebLogic 12c also is a supported version for Oracle Enterprise Data Quality 11.1.1.6.1 and if no, then which version of Oracle Enterprise Data Quality is supported on WebLogic 12c (12.1.2)
Its really urgent.Please guide!
Thanks in Advance!

Hi,
Thanks But I already followed this link and I forgot to mention that I am looking for the supported version of Oracle Enterprise Data Quality for Product Data for Oracle WebLogic 12.1.2. In the certification matrix of Oracle Enterprise Data Quality for Product Data 11g it is listed that the supported weblogic version is 10.3.6. So I wanted to know which version of Oracle Enterprise Data Quality for Product Data would support weblogic 12.1.2 or if Oracle Enterprise Data Quality for Product Data 11g is supported on weblogic 12.1.2 also.
I checked the certfication matrix for Oracle Enterprise Data Quality for Product Data 11g from Oracle Fusion Middleware Supported System Configurations link only.
Please suggest!

SSO - support version 1.1 of the SAML

Similar Messages

Maybe you are looking for