SSO within an ABAP+JAVA on the same host

Experts:
We have a dual stack (ABAP+JAVA) NW04s on the same host.
The usage type EP7 is enabled.
From this EP7 we want to access its own ITS thru SSO.
We configured the SSO just like we did for the EP7 + ECC on 2 different hosts.
However, we are always asked for an ID/password when trying to test the SSO from the EP7.
The error is:
"SSO logon not possible; browser logon ticket cannot be accepted"
Please advise. Points guaranteed. Thanks!

hi,
I also tried to do the same, but i think it's not possible.
I read somewhere that SAP recommends to use different instances of ABAP and Java. I installed seperate ABAP and Java instances on the same host and then configured SSO using the Configuration Wizard in NWA configuration. and it works perfectly.
regards,
Ankur

Similar Messages

Several ABAP Backends to the same Bi java?

Hello,
Is it possible to connect several ABAP backends to the same Bi Java?
Is there any specific information around this?
We have already one abap connected to a Bi Java, but would like to have another one connected to use Bex reporting, but I'm not sure how to set this up without interfering with the current setup.
Best regards
Tomas

Hi,
Yes, you can connect new system. Create new System object in BI portal system for other backend systems. And link it with BeX reporting.
Thanks
Sunny

How to use 2 webcam for java at the same time?

hi there,
I have a question to ask regarding webcam and java. Basically i want to know whether is it possible to have 2 web cam running in java at the same time? I have no problem when running one usb webcam since i m using "
ml = new MediaLocator("vfw://0") ;
what parameter must i use to specify when using 2 web cam
many thanks
sun

Hi
I am making a project in which i have to capture a image through webcam. How can I do it will you please guide me or if can provide me code. Many thanks for your support. My email id is [email protected]

How to Create Primary DB and Physical/Logical Standby DB on the same host?

Now I encounter a issue. I want to create one Primary DB and one Physical standby DB and one Logical standby DB on the same host.
Create this env on the same host aims to test whether we can using EM Patching DP to apply patches on Primary/Physical/Logical DB successfully.
I try to setup this env but fails. I want to know more related issues about create Primary DB /Physical DB/Logical DB on the same host and how to configure between them.
Below steps is my try:
1. Create Primary DB on the /scratch/primary_db
2. Create Physical Db software only on the /scratch/physical_db
3. Create Logical Db software only on the /scratch/logical_db
4. Using EM Wizard to create physical standby database and logical standby database, and these two targets can show up on the "All Targets" Page.
5. But when using EM Patching DP, it fails and the reason is the listener of physical and logical db cannot configured well.
Issues:
So I want to know about how to configure physical db and logical db's listener using EM or manually?
If the listener name of Primary Db is LISTENER and the port is 1521,and the listener.ora is under the /scratch/primary_db/network/admin directory, then how to config physical db and logical db's listener's name and port?

Hi,
As this a test case then you need to create two more listener for each Oracle Home (/scratch/physical_db & /scratch/logical_db) make sure that they have different names and ports.
Then add the new listeners manually using GC?
Try it and let me know
Regards
Amin

2 mta in the same host

hi,
i'm trying to make some test with an antivirus. i have only one server i installed ims 5.2 (smtp at port 10026) with iDS 5.2 (port 389), and i installed another iMS in the same host but the smtp is at port 25, before i install the antivirus software i tried to make some test with the IMS.
both iMS share the Directory Server.
first i send an email at port 25 then the server send the message at port 10026 in the same sarver (i saw the logs and it did it) but in the instance that use the port 10026 only enqueue the mail, does anybody have any idea of what is going on!, maybe the things i'm testing are wrong. ....
When i run the ./msg-stop smtp in the instance that use the port 25 then the instance with the port 10026 delivery the enqued mail..

thanks for your answer..
i read the documentation that you send,
but the documentation of the antivirus say that needs two mta to make a special configuration, the thing is the doc say that needs 3 servers:
1 mta/IN (pto 25)
1 server AV (100025)
1 mta (pto 10026)
the thing is that i only have one server, and i'm trying to do the same configuration with my server..
The people that sell the Av software said that they can do the same configuration in one server but using like mta Postfix.
i'm tryin doing the same with IMS.

Two databases in the same host.

Hi Group,
I have a doupt, It's possible that two databases with the same name, live in the same host, if they have different OracleHomes, and the SO users who were installed with are different? eg.
SO user: oraqas
OracleHome1 : /qas/u01/app/oracle/product/9.2.0
BD: prdsia01
SO user: oracle
OracleHome2: /u01/app/oracle/product/9.2.0
BD: prdsia01
If not, what do you recommend?
Thanks a lot

It's possible that two databases with the same name, live in the same host,
if they have different OracleHomes, and the SO users who were installed with are different? what is "SO users"?
what is "BD: prdsia01"
Yes, two Oracle databases with same ORACLE_SID can reside on same system as same time.
The only restriction is that only one instance can be online at a time.

Two SAP systems in the same host "no files processing"

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Hello!
I have two SAP Systems installed on the same host.
If I execute redo logs archiving from DB13 I get the error "no files processing", because of I already executed redo logs for the other SAP system on the same host.
<b>How can I set up this issue?</b>
Thank you very much
regards
Thank you very much
regards

Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?

As far as I remember 10.1.2.2 was not supporting installation of multiple OID on the same host?
Can multiple 10.1.4.0.1 IDMS servers be installed on the same host?
TIA

Nothing would stop you from installing 11i and R12 on the same server as long as ORACLE_HOMEs, APPL_TOPs, and COMMON_TOPs of each instance are installed in separate directories. The only pitfall would be the performance (unless you have sufficient resources).
Please don't consider this plan for production instances!
Thanks,
Hussein

Is the 1000v supported on the same hosts it manages yet?

Question posted to our Twitter account from @SlackerUK
"Is the 1000v supported on the same hosts it manages yet? Thanks"

http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0_4_s_v_1_3/getting_started/configuration/guide/n1000v_gsg.pdf
Chapter 5: Running a VSM and VEM on the Same Host
/Prasad.

Can smb and afp coexist on the same host?

Greetings all!
I've been using Macs and OSX for a year. And recently I bought another MBP so I am seriously considering Time Machine backups. I have a Linux home server running Ubuntu 12.04 and Samba and my previous MBP running Mountain Lion connects to it happily without any problem. But my trouble started when I tried to setup afp on the same box.
I followed this post and this post and got the fake time capsule showing in Time Machine without any problem. But soon I found myself unable to connect to the old samba shares. The smb host now displays as a Time Capsule. If I click on that OSX will say 'failed to connect'.
As I understand there are 2 pieces involved on the server side, avahi to broadcast the service info and netatalk to provide the service itself. It's a bit like nmbd and smbd in Samba. If this is true then it's somewhat understandable that OSX can not display the same host as 2 different types of services at the same time. So I stopped avahi-daemon and very soon the old Samba shares appeared again.
I am able to connect to both services using command+k but I would rather have them running normally so that my wife will be able to use them without extra tech support. Can anyone tell me if what I said above is true and/or if there is a graceful way around this? If answer is no then I will have to create a virtual machine or nic alias just for time machine and I think it's quite a waste.
Thanks!

tristonej wrote:
I don't quite understand why people buying non-Apple devices should not expect OSX to work with them
Because Apple has no control over 3rd parties. They can do what they want. If Apple publishes a new authentication mechanism in 2002, the 3rd party doesn't have to implement it. That isn't Apple's fault. If they do get around to supporting it in 2009 and then some 4th party doesn't bother to use the 2009 code in 2011, Apple still can't do anything about that. If anyone else wants to advertise, and support, Time Machine compatibility, they are welcome to do that. They definitely have the advertising part down, the support, not so much.
There is a time when apple only worked with apple but that aparently was not sustainable. And that's why now Apple is embracing smb
Apple's goal is to choose the best solution for its customers. Sometimes that is a proprietary connection or protocol and sometimes it is something industry standard. In all cases, there has to be some cut off for testing and support. That is why Apple eventually stops supporting its own hardware and technologies at a certain point. That is also why Apple will support SMB as deployed by Microsoft but isn't going to waste much time on home-built Linux servers.
(it's said even samba was used shortly on OSX, not quite sure) and allow users to install windows on macs. Even OSX itselt is based on FreeBSD and uses quite a lot of open source components.
Apple uses a lot of open source software. Samba was one of those projects. Unfortunately, the people that made those products didn't want Apple using them so they changed the licensing to prohibit Apple (and pretty much only Apple) from using their source code. That is why some of the open source packages in OS X are stuck in a 2007 version. That is also why Apple abandonned Samba and wrote its own SMB implementation.
OS X is not based on FreeBSD. It has a BSD-flavoured POSIX layer, but it is a distinct operating system at its core.
IMHO there is no magic in throwing money at propiretary hardware/software or praying to Steve Jobs. If something is not working, it must be that there is a bug in the code or the design. And neither OSX nor Macs are built by God, which means they are bugged as other software/hardware.
I'm confused. When did anyone say anything about praying to Steve Jobs or divine technology? You asked about using Linux as a Time Machine server. I suggested you avoid that if you value your data. I also asked why you would want to keep running Linux now that you have a Mac. A Mac can do anything Linux can do with a fraction of the effort.
The answer is simple, Macs can not do what I want.
Which is?
Withe a standard mATX case I can have quite a few 3.5" drive bays while there is only one 2.5" in a Mac mini. And with Ubuntu/Debian, getting/updating the software or the system is quite easy, just one or a few lines of apt commands, not quite possible with OSX.
That's certainly true. OS X updates itself without having to run any apt commands.
If you must compile something from the source to get a Linux running then something must be seriously wrong.
My thoughts exactly. But perhaps you didn't follow me entirely. Apt, yum, etc don't have everything one needs to setup something as fancy as, I don't know, a web server. While I did have to compile a number of things from source, I had to actually edit the source a couple of times as well.
The best thing I love about Linux is openess. You can customize almost everything and change it whatever way you want. With Mac, for example the 2013 Retina MBP I just bought, it's not even possible to change the power button behavior, which is very annoying.
Then why did you buy a Mac? That's no big secret. Some people like not have to configure everything just to get it running. I have other things to do than edit config files.
Back to my original question. I think the problem is not quite with compatibility of Bonjor but rather whether OSX can show this or not. Imagine you have a smb share and afp share on the same host, with the same name, how would OSX display it? And which icon will OSX use to display the host? I can not think of the answer so if you know please tell me.
OS X will just display it like it display any server. One of your links event has instructions on how to pick the icon you want to fake. If you are running both services then I am not sure which one it would try to connect with. Neither of your services are native, not matter how much they try to fake it. If you wanted a specific service you would have to manually use the correct protocol in Finder > Go > Connect to Server. However, bot of those links were posted before Mavericks. Obviously they don't work anymore. It's Linux. It's open. Right? So fix it and post it on your own blog. I do not know what modifications you would have to make to either Samba or Netatalk to make them work with Mavericks.
If all you need is to allow your wife to connect to one specific protocol, then manually connect to that service, saving your password in the keychain, and create an alias by Command-option dragging the server to some other folder. Then, she can just double-click on the alias to connect to the network.
Now, if you really want to be clever, you can setup an automount to that service instead. Then the server will be mounted and unmounted as needed.

SSO on AS Abap/JAVA using Kerberos

Hello,
We have the following configuration:
ECC system
Setup of Microsoft UAG server for SSO using Kerberos W2008R2
All the steps about SPN has been applied...
We use Kerbtray to check the keys..
But when using WEBGUI, we got error 401 http auth.
Tried to trace but nothing. I've found nothing on those forum about the setup of service webgui..and tried the most combination without any success...now I've selected in logn data procedure "Alternative logon procedure" and security standard-auth standard SAP user and keep all logon procedure.
Have a idea how to fix this problem ? thanks in advance.
Info: all the checks about IE8 or firefox setup has been applied and I've used SPNego Add-on setup and import the generated keytab ...with crypto RC4-HMAC-NT.
Regards,
Jade

Hi Jade,
I was in a same situation before. I have to configure SSO with Windows Authentication for IITS. I have configured Kerberos for SAP GUI for ABAP and SAP Negos only for JAVA stack (not for ABAP stack (IITS)). The Windows Authentication is possible with ABAP or JAVA individually. When I have opened a message with similar requirement SSO experts sugested me to use 3rd party products.
So finally to achieve the requirement I have configured SSO with Logon Tickets. Even though you dont have Enterprise portal, you can configure SSO with Logon Tickets creating a PSE in ABAP stack and importing in other system. This worked fine with IITS. Only for the initial system we need to enter credentials remaining directly logs you in the system with the generated cookie/ Ticket.
If you can try SAP negos then config. for ABAP to accept JAVA tickets (there is conf SSO from JAVA to ABAP) on the same system. This may enable Windows Authentication for IITS (I didnt try this)
Refer: Need help in SNC configuration for ITS (IITS)
If you come up with any Solution other than this to enable Windows Authentication, Please post. May be Olivier Solution Works here. Olivier could you please post about the SAP note info and the config steps?
Thanks,
Ajay.
Edited by: Ajay_Basis on Jul 15, 2010 5:15 PM

SAP BW 7.4 on MS SQL- With ABAP & JAVA Stack as same SID

Dears,
If you have any experience or idea for SAP NetWeaver Business Warehouse 7.4 installation on MS SQL or Oracle Database with ABAP Stack and Java Stack as same SID.
Kindly help for this possibility.
Regards,
Sri

Hi Experts,
Great for viewers.
But still expecting some ideas above questions kindly answer.
Also i got some important points.
Java Stack for BW on HANA
At least any one answer the purpose of BW Java Stack.
Regards,
V Srinivasan

SSO between WebDynpro and Servlet on the same machine

Hi,
I have an WebDynpro application running in our portal which makes some calls using RFC to a backend system. The RFC connection is obtained using DestinationService and SAP Logon Ticket is used for authentication.
This app should call a servlet on the same instance which also uses RFC to get some data from the backend.
Now, wenn I call the servlet from the WebDynpro, the exception java.lang.IllegalStateException: No SAP logon ticket found comes up. Does anyone have an idea how to configure the servlet-webapp to accept logon tickets?
Thanks in advance
Thorsten

this must mean that your windows drive is formatted NTFS. NTFS drives are not natively writable from OS X (only readable). However, you can install Macfuse and [NTFS-3g|http://macntfs-3g.blogspot.com> (both are free) to make them writable.

SSO for multiple APEX applications on the same instance

Hi All,
We have an APEX instance with 2 applications configured in 2 workspaces.
The instance is already configured to use SSO. I have followed thee Metalink note #562807.1 to do the SSO wiring.
We are planning to incorporate SSO authentication for both the applications.
Also planning to use different URLs (2 aliases for the server) for the applications.
eg:-
App1 will be using http://app1.us.oracle.com/pls/apex/f?p=100:10
App2 will be using http://app2.us.oracle.com/pls/apex/f?p=200:10
Is it possible to register SSO on 2 URLs for the same instance?
Can I execute regapp.sql multiple times on the same instance?
Please advice me.
Thanks,
Sajeesh

Is it possible to register SSO on 2 URLs for the same instance?You should be able to register as many partner applications as you like. I suggest that you try it.
Can I execute regapp.sql multiple times on the same instance?Yes, but the lsnr_token value must be unique. That's HTML_DB:hostname:port.
Your applications in different workspaces will not be able to share sessions but you will probably get the single-sign-on behavior you need.
Scott

Execute external program from java in the same virtual machine

hello,
I need some help. here is what i need: i'm developing a test tool and i need to execute the application to be tested from my test tool in the same virtual machine so that i can be able to connect to that application and catch events like clicking and so on.
problem is that i do not know how to launch the application i want to test in the same virtual machine as the test tool.
any help would be good,
thanks

problem is that i do not know how to launch the
application i want to test in the same virtual
machine as the test tool.Just invoke the main class of that application.
You probably don't want to hear this, but writing a test tool is not easy if you are going to try to catch events etc. It's probably a bit too hard for you if you don't know how to invoke an app within the same VM.
Kaj

SSO within an ABAP+JAVA on the same host

Similar Messages

Maybe you are looking for