Ssocfg fails - unable to establish secure connection to OID on port 636

Infrastructure tier on 10g Application Server was installed without the fully qualified hostname. The fix includes running the ssocfg.sh in $<infrastructure_home>/sso/bin. However, when I run the ssocfg.sh script I get an exception saying: "Repository Access API throws exception :oracle.ias.repository.schema.SchemaException: Unable to establish secure connection to Oracle Internet Directory Server ldap://<hostname>:636
When I execute ldapbind on port 636 I get a timed out error.
Any ideas on where to look for a fix?

Please post your problems in more details. What is the error message you are getting?
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

Similar Messages

Safari unable to establish secure connections after security update

Is Apple going to fix this or at least tell us how to go back to previous version that worked fine??? Does any one know haow to do either???
I too have had it!!! I have used a Mac for over fifteen years, but this may be the last one!!! There does not seem to be anything intuitive about it any more.

we are also running cucm 9.1.2 and are considering getting several sectera viper units.
did your issue ever get resolved?

Unable to establish serial connection between 2 serial ports of same laptop

I am trying to run "Basic 2 port serial write and read.vi" from the labview example using the 2 different com ports of same laptop. My serial cable is fine. It has passed loopback test. Also I have successfully communicated with the microcontroller(via max232) using the same cable. Still In the given example, I am not recieving character that I have written in the "string to write" window. I have confirmed the com port numbers. The cable I am using is simple 3 wire tx-rx and ground cable. I have also tried to connect two ports on two different pc's that also doesnt work. What may be the problem? I can't see any.

Are you changing the data being sent? As currently configured, you need to make sure the \n stays at the end of the data. To avoid this, turn the termination character off (input on the top of the Configure Serial Port, wire a FALSE constant to it).
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

BEA-149505 -The administration server was unable to establish JMX Connect.

hello
Getting the following error, trying to access the weblogic admin server ( Linux x86-64 RHL50) after a fresh install.
BEA-149505 The administration server was unable to establish JMX Connectivity with the managedServer at the JMX Service URL of <none > URL in the AdminServer LogiI
1. what steps and configuration files do I need to access to add the url
I will like to add that the node manager and the cluster screen were NOT configured during the configuration, since this is NOT an OIM configuration
2. if you have any tips please let me know
r.

faisal
thank for your feedback. I added this in my startup script, but I was NOT able to get the web access to work and when I shot it down, there was an error.
Here is the startup script, Please show me when to place the scripts
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
stopAll()
# We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if [ "X${ALREADY_STOPPED}" != "X" ] ; then
exit
fi
# STOP DERBY (only if we started it)
if [ "${DERBY_FLAG}" = "true" ] ; then
echo "Stopping Derby server..."
${WL_HOME}/common/derby/bin/stopNetworkServer.sh >"${DOMAIN_HOME}/derbyShutdown.log" 2>&1
echo "Derby server stopped."
fi
ALREADY_STOPPED="true"
# --- End Functions ---
# This script is used to start WebLogic Server for this domain.
# To create your own start script for your domain, you can initialize the
# environment by calling @USERDOMAINHOME/setDomainEnv.
# setDomainEnv initializes or calls commEnv to initialize the following variables:
# BEA_HOME - The BEA home directory of your WebLogic installation.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# PATH - JDK and WebLogic directories are added to system path.
# WEBLOGIC_CLASSPATH
# - Classpath needed to start WebLogic Server.
# PATCH_CLASSPATH - Classpath used for patches
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
"/erasdevapp/weblogic/user_projects/domains/base_domain/bin/startWebLogic
umask 037
# Call setDomainEnv here.
DOMAIN_HOME="/erasdevapp/weblogic/user_projects/domains/base_domain"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"
SAVE_CLASSPATH="${CLASSPATH}"
# Start Derby
DERBY_DEBUG_LEVEL="0"
if [ "${DERBY_FLAG}" = "true" ] ; then
${WL_HOME}/common/derby/bin/startNetworkServer.sh >"${DOMAIN_HOME}/derby.log" 2>&1
fi
JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"
SAVE_JAVA_OPTIONS=""
CLASSPATH="${SAVE_CLASSPATH}"
SAVE_CLASSPATH=""
trap 'stopAll' 1 2 3 15
if [ "${PRODUCTION_MODE}" = "true" ] ; then
WLS_DISPLAY_MODE="Production"
WLS_DISPLAY_MODE="Production"
else
WLS_DISPLAY_MODE="Development"
fi
if [ "${WLS_USER}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"
fi
if [ "${WLS_PW}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"
fi
if [ "${MEDREC_WEBLOGIC_CLASSPATH}" != "" ] ; then
if [ "${CLASSPATH}" != "" ] ; then
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"
else
CLASSPATH="${MEDREC_WEBLOGIC_CLASSPATH}"
fi
fi
echo "."
echo "."
echo "JAVA Memory arguments: ${MEM_ARGS}"
echo "."
echo "WLS Start Mode=${WLS_DISPLAY_MODE}"
echo "."
echo "CLASSPATH=${CLASSPATH}"
echo "."
echo "PATH=${PATH}"
echo "."
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://hostname:port/console *"
echo "***************************************************"
# CLASS CACHING
if [ "${CLASS_CACHE}" = "true" ] ; then
echo "Class caching enabled..."
JAVA_OPTIONS="${JAVA_OPTIONS} -Dlaunch.main.class=${SERVER_CLASS} -Dlaunch.class.path="${CLASSPATH}" -Dlaunch.complete=weblogic.store.internal.LockManagerImpl -cp ${WL_HOME}/server/lib/pcl2.jar"
export JAVA_OPTIONS
SERVER_CLASS="com.oracle.classloader.launch.Launcher"
fi
# START WEBLOGIC
echo "starting weblogic with Java version:"
${JAVA_HOME}/bin/java ${JAVA_VM} -version
if [ "${WLS_REDIRECT_LOG}" = "" ] ; then
echo "Starting WLS with line:"
echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS}
else
echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${JAVA_OPTIONS} ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1
fi
stopAll
popd
# Exit this script only if we have been told to exit.
if [ "${doExitFlag}" = "true" ] ; then
exit
fi

Unable to DES encrypt / Unable to establish security context.

I am trying to call a tux client from Oracle Stored proc as an external procedure.
My tpinit fails giving me the following error:
GP_CAT:1567 Unable to DES encrypt data (50/517).
LIBTUX_CAT:6243: Unable to establish security context Error code 70 minor_status
4290672230.
LIBTUX_CAT:2005 gssapi function returned -3003.
However the client runs perfectly fine when I run it from unix command prompt.
My WSL is runing on a server with NO security.
Can someone help?
Thanx in advance.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

TPINIT error Unable to establish WSH connection 0x000221150afea683

Dear All,
we have applications deployed using tuxedo. All the applications are in working condition, but one new application is deployed with same parameters of working applications but on new client application on Windows 2008 server.
This application cannot access the tuxedo server and giving following error.
152035.WEBAPP!?proc.4020.3152.0: 01-30-2013: Tuxedo Version 11.1.1.2.0 with VS2010, 64-bit
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1064: ERROR: Unable to establish WSH connection 0x000221150afea683
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1055: ERROR: Unable to establish WSL connection
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1027: ERROR: Unable to connect to WSH
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1020: ERROR: Unable to obtain authentication level
The same application is working on 32 bit 2003 server. and only changed this in 64 bit 2008 server.
My .bat file on the client is as follows. The tuxedo server is already serving all other clients except this one. Server version is tuxedo10gR3. Firewall on this client is also disabled
cls
set APPDIR=C:\bea\prs\
set WSNADDR=//202.25.16.11:7025
set TUXDIR=C:\\bea\\tuxedo11gR1_VS2010
set PATH=%TUXDIR%\\bin;%APPDIR%;%PATH%
set LD_LIBRARY_PATH=%TUXDIR%\\lib
@echo on
echo "Processing online recovery file: " %2
echo %TUXDIR%
echo %WSNADDR%
echo %LD_LIBRARY_PATH%
cd C:\bea\prs
c:
C:\bea\prs\prs.exe %1 %2 %3 %4
Edited by: user6951085 on Jan 30, 2013 2:42 AM

Dear All,
I found out why this is happening(with the Help of Oracle support), so updating it for future use.
Tuxedo uses random ports for clients that have connected to WSL listener. thats why my first error
152035.WEBAPP!?proc.4020.3152.0: LIBWSC_CAT:1064: ERROR: Unable to establish WSH connection 0x000221150afea683
was coming. this means (as per the documentations) that the WSL have accepted the connection but the next step of connecting to WSH is not done. which causes the above error.
The resolution can be 2 things.
1. Allow allow ports of Server or range of ports starting from port of WSL e.g. port WSNADDR port 7777 to 7777+2000 ports , so that clients can access the WSL port + 2000 ports
2. add a parameter on the tuxedo server ubb file to define a range of ports which can handle client requests. (most probably in the WSL CLOPT portion)
if your network has security and it only allows some ports to be accessed , u can get this error.
Thanks.
Edited by: user6951085 on Jan 31, 2013 1:18 AM

Unable to establish loopback connection when running junit tests

Hello,
I just started using jrockit (jrockit-jdk1.6.0_20-R28.1.0-4.0.1) and I encounter a problem running junit tests.
I have 2 tests in the same junit suite, both do binding to 127.0.0.1.
The first test succeeds in the binding. Once it finishes, the second one tries to bind to same address and fails due to IOException, Unable to establish loopback connection (logs below)
If I run them using sun's hotspot jvm they work fine.
If I run them separately, i.e, only one test per suite, each works fine.
It seems that only when switching to jrockit I get the problem.
Any idea?
Thanks,
Edo
Logs:
ERROR [Main Thread_1] Failed to start ConnectionFullVirtualServer[server.traffix.com/127.0.0.1:3868]
[org.jboss.netty.channel.ChannelException: Failed to bind to: server.traffix.com/127.0.0.1:3868 ] thrown
     org.jboss.netty.bootstrap.ServerBootstrap.bind(ServerBootstrap.java:303)
     com.traffix.openblox.core.transport.ConnectionFullVirtualServer.listen(ConnectionFullVirtualServer.java:60)
     com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:143)
     com.traffix.openblox.core.transport.StackImpl.doStart(StackImpl.java:772)
     com.traffix.openblox.core.transport.TransportStack.doStart(TransportStack.java:156)
     com.traffix.openblox.core.transport.StackStateMachineImpl.doStart(StackStateMachineImpl.java:75)
     com.traffix.openblox.core.transport.StackStateMachine$StackStateConfigured.processEvent(StackStateMachine.java:60)
     com.traffix.openblox.core.fsm.StateMachine.processEvent(StateMachine.java:90)
Caused by: java.io.IOException: Unable to establish loopback connection
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)
     sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     java.nio.channels.Selector.open(Selector.java:209)
     org.jboss.netty.channel.socket.nio.NioServerSocketPipelineSink$Boss.<init>(NioServerSocketPipelineSink.java:219)
Caused by: java.nio.channels.ClosedByInterruptException
     java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:184)
     sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:518)
     java.nio.channels.SocketChannel.open(SocketChannel.java:146)
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:78)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)[ com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:146) ][22/12/2010 11:05:57:511]
ERROR [Main Thread_1] Failed to start Endpoint Stack(server.traffix.com Configured)
[org.jboss.netty.channel.ChannelException: Failed to bind to: server.traffix.com/127.0.0.1:3868 ] thrown
     org.jboss.netty.bootstrap.ServerBootstrap.bind(ServerBootstrap.java:303)
     com.traffix.openblox.core.transport.ConnectionFullVirtualServer.listen(ConnectionFullVirtualServer.java:60)
     com.traffix.openblox.core.transport.VirtualServerTable.listen(VirtualServerTable.java:143)
     com.traffix.openblox.core.transport.StackImpl.doStart(StackImpl.java:772)
     com.traffix.openblox.core.transport.TransportStack.doStart(TransportStack.java:156)
     com.traffix.openblox.core.transport.StackStateMachineImpl.doStart(StackStateMachineImpl.java:75)
     com.traffix.openblox.core.transport.StackStateMachine$StackStateConfigured.processEvent(StackStateMachine.java:60)
     com.traffix.openblox.core.fsm.StateMachine.processEvent(StateMachine.java:90)
Caused by: java.io.IOException: Unable to establish loopback connection
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:106)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41)
     sun.nio.ch.WindowsSelectorProvider.openSelector(WindowsSelectorProvider.java:26)
     java.nio.channels.Selector.open(Selector.java:209)
     org.jboss.netty.channel.socket.nio.NioServerSocketPipelineSink$Boss.<init>(NioServerSocketPipelineSink.java:219)
Caused by: java.nio.channels.ClosedByInterruptException
     java.nio.channels.spi.AbstractInterruptibleChannel.end(AbstractInterruptibleChannel.java:184)
     sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:518)
     java.nio.channels.SocketChannel.open(SocketChannel.java:146)
     sun.nio.ch.PipeImpl$Initializer.run(PipeImpl.java:78)
     sun.nio.ch.PipeImpl.<init>(PipeImpl.java:122)
     sun.nio.ch.SelectorProviderImpl.openPipe(SelectorProviderImpl.java:27)
     java.nio.channels.Pipe.open(Pipe.java:133)
     sun.nio.ch.WindowsSelectorImpl.<init>(WindowsSelectorImpl.java:41

Have you tracked down if the phone actually sends the TCP connection to the desktop? I'm feeling that this is a firewall issue that shows itself when the firewall zone changes (public/private/domain).
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

âCAS Cannot Establish Secure Connection to CAMâ

I have a problem with NAC
"cas Can not Establish Secure Connection to CAM"
the error message in the CAS is "Encountered error.unable to connect to manager.javax.net.ssl.SSLHandshakeException: Remote host closed connection during handshake"

Check the current time for CAM and CAS, it must be in 300 segs max interval of different.
Check the SSL autogenerate certified if you are used it.

MacBook Pro "cannot establish secure connection"

MacBook Pro "cannot establish secure connection" can't connect to Internet, tried on two separate networks and via wifi and Ethernet. Any suggestions??
Mac book was connected and working then started giving error message "failed to establish secure connection" now cannot connect to Internet via any network. Either by wifi or Ethernet. However in network settings it says it is connected. iTunes also cannot connect so don't think it is a safari problem. Have also checked networks with other devices and the network itself seems to be working.
Have further problems with syncing phone (doesn't seem to registering removal of music, storage is not freeing up) but I am hoping that solving Internet connection may solve that problem as well
Apologies if i am posting in the wrong place!
Any suggestions greatly appreciated as I am stuck.

System Preferences > Date & Time
Enable "Set date & time automatically".
http://support.apple.com/kb/TA20405

"Unable to establish a connection between WebEx and the mail server."

Hi,
I installed Cisco WebEx and integrated with our Microsoft exchange server. It showed server "UP". everything's came up and working fine after that and sudenlly i found this message "Unable to establish a connection with the mail server. Please recheck settings."
I went into the Mail Server setup to edit settings and now, it shows Server Down. Do I need to do something on the MS Exchange 2010 or from webex server ??
Any help is greatly appreciated. Thanks a lot!

Every 180 seconds, CWMS verifies the connection to the SMTP server by establishing a connection on TCP port 25 (SMTP) and then sending the EHLO command followed by the QUIT command. This check is also performed once when logging into the admin web page or when browsing to System -> Servers (where the status of the mail server is displayed).
If this sequence does not complete successfully, the warning “Unable to establish a connection with the mail server. Please recheck settings.” will show in a banner at the top of the CWMS admin pages.
You can verify the connection to the SMTP server manually by using “telnet 25”.
If you have access to the CWMS unix shell be aware that CWMS does not come with the telnet command installed.
As an alternative, you can use this 3-lines script:
exec 3<>/dev/tcp/x.x.x.x/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Replace x.x.x.x by the ip address or hostname of the SMTP server and save the script in a file, f.e.:
/* script saved in a file named ehlo */
[root@dchriste-cwms-adm1 ~]# cat ./ehlo
exec 3<>/dev/tcp/10.48.54.79/25
echo -e "EHLO\r\nQUIT\r\n " >&3
cat <&3
Then, execute it:
[root@dchriste-cwms-adm1 ~]# sh ./ehlo
The output should be similar to this:
220 *******************************************************************************************************************
250-confukdc.confuk.com Hello [10.48.52.110]
250-TURN
250-SIZE
250-ETRN
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-8bitmime
250-BINARYMIME
250-CHUNKING
250-VRFY
250-XXXXXXXXXXXXXXXXXXXXXXXA
250-X-EXPS=LOGIN
250-AUTH GSSAPI NTLM LOGIN
250-AUTH=LOGIN
250-X-LINK2STATE
250-XEXCH50
250 OK221 2.0.0 confukdc.confuk.com Service closing transmission channel
Also, you can use this tcpdump command to see the conversation (replace x.x.x.x by the SMTP server’s IP address or hostname):
tcpdump -vXs 0 host x.x.x.x and tcp port 25
If you have HA, it is not certain which admin VM talks to the smtp server, so best to check both.
If you don't have access to the CWMS unix shell, best to span the switch ports and run packet capture.

Could not establish secure connection with server

Hi ,
We are not able to access our web service URL from Ipad Application on some of the network. We are receiving “could not establish secure connection with the server” message. We are able to access the same URL from other networks. Can you please suggest what can be possible Root cause and their suggested solution? We would appreciate your quick response..

hi Alfonso,
Editing the hosts file is easy. just need to use the CAS/CAM CLI and the vi test editor. You can google for instructions on how to use Vi.
To start assume we have a CAM and CAS with the hostname cam1 and cas1 respectively. the domain is mycompany.com and the ip addresses for the CAM and CAS is 192.168.10.1 and 192.168.15.2 respectively.
start with the CAM and view the hosts table
cat /etc/hosts
To check what domain u used to setup the CAM
cat /etc/resolver.conf
edit the hosts file so appears like so
192.168.10.1 cam1.mycompany.com cam1
192.168.15.2 cas1.mycompany.com cas1
Verify with 'cat /etc/hosts'
Make sure you can ping 'cas1' and 'cas1.mycompany.com' from cam1
Next edit the hosts file for cas1 so that it appears like so
192.168.15.2 cas1.mycompany.com cas1
192.168.10.1 cam1.mycompany.com cam1
Make sure you can ping 'cam1' and 'cam1.mycompany.com' from cas1
HTH
George

N70 Unable to establish network connection using p...

. . . but can browse the net using handset alone; PC suite can do other functions but OTA is not able to connect. This happened after I downloaded the latest PC Suite 7. Recommendation of FAQ/Help is to check connections settings (duh) and have cooperated with instructions. Nope, didnt work. Have tried:
Uninstall; install of PC Suite to the letter 5x
Reset phone to factory settings
Use settings wizard to ensure proper internet settings
Was recommended download usb cable driver - link is non existent
Tested using a different N70 unit on my laptop - still no go (now doesnt that mean there is a software issue????)
Most of the help desk tips at the call center are stop gap and rarely meant to go the distance assisting you (like when a blanket fix is recommended - go to service center to have phone software upgraded) or the standard spiel of "we'll put your case on record and we'll call you back in hours" and sometimes they do call back or not. So far in my case none of the tips have worked. I am about to reformat my pc, and if this doesnt work, then what can we say about the problem? Did we get a dud PC Suite, a lemon, a beta version?
How then can I browse the net using my mobile as modem? I guess I am venting my frustrations here - but hey, may I challenge Nokia to find a fix for connectivity issues related to use of a Nokia Phone as a modem? Check out the discussions and you will find similar issues echoed all over. Or is Nokia just waiting for one of us indomitable tinkerers to find a solution and share it in these discussions?

I REFORMATTED MY PC TO SEE IF IT IS A PROBLEM WITH MY LAPTOP SOFTWARE. I AM STILL UNABLE TO ESTABLISH NETWORK CONNECTION USING MY PHONE AS A MODEM. IT SAYS CHECK CONNECTION SETTINGS, BUT HOW FAR CAN YOU GO WITH THAT? THE CONNECTION SETTINGS ARE FINE! I CAN BROWSE THE NET USING THE HANDSET ALONE, SO WHAT GIVES? I CHALLENGE NOKIA TO FIND A SOLUTION TO THIS PROBLEM.

I cannot open my Yahoo Mail but everything else is OK. When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page. Safari can not establish secure connection with Yahoo Mail.

I cannot open my Yahoo Mail but everything else is OK. When I click Yahoo Mail Icon, I get this error message "Safari Cannot open this page. Safari can not establish secure connection with Yahoo Mail.

It sounds as though a script on the site, or an advertisement, is not working quite right...
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
(You also can clear Firefox's cache completely using:
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now")
(2) Remove the site's cookies using either of these. Save any pending work first.
While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help?

Error - unable to establish JCO connection with SSO

Hello,
I have implemented XSS on WebDP and this is working fine. So my JCO connections SAP_R3_HumanResources must be configured correctly. However I have just done the 'GetFlight' BAPI tutorial and upon execution I get the error:
'com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCException: Could not create JCOClientConnection for logical System: SAP_R3_HumanResources - Model: class com.sap.tut.wd.flightlist.model.FlightModel. Please assure that you have configured the RFC connections and/or logical system name properly for this model!'
CAUSED BY
'User not authenticated (is anonymous) - unable to establish JCO connection with SSO'
Can anyone help here?
Thanks
Mr.T

HI
GOOD
GO THROUGH THIS LINK WHICH CONTAINS THE A SINGLE SIGN-ON IN A COMPLEX SYSTEM LANDSCAPE.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/80fbc690-0201-0010-1aba-93d5c8232b4a
http://www.sap-press.de/download/dateien/1020/sappress_sap_security_authorizations.pdf
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff65b5a2-0a01-0010-5b97-e747192a1d49
THANKS
MRUTYUN

Sybase odbc driver client unable to establish a connection

Please some one help me at this. I am new to sysbase.
I am try to create dsn name for sysbase.
While connecting sysbase i gave sa as user name and administrator as password.
Its connecting and show master db and some other db.
After that i am trying to create dsn. While i creating dsn i gave
1) Hostname as my system hostname.
2) Database name as master db
3) Logon Id as sa (sa is my user name i gave)
4) Port : 5000
When i click test connection it asked password. i gave as administrator.
After few seconds it show sybase odbc driver client unable to establish a connection error.
I provide screenshot what i did and what error is occured.
Please guide me at this.

Hi Srinivasan,
This is the first thing I noticed. You have a Windows 2012 R2 box. Make sure you install the SDK 15.7 SP130 or later or SDK 16.0 PL04 or later. We just got the SDK certified with the R2 box so the installation runs correctly.
Second thing, when you run the odbc manager if you are creating a system dsn you need to start the Windows odbc manager as administrator on a Windows 2012 or Windows 8 box or you get permission issues on this system.
Third thing you should pay attention to is if the application is a 32 or 64 bit application. This decides if you run the 32 or 64 bit Windows odbc manager.
If your still having problems please tell me and I will investigate. I got a Windows 2012 R2 box with SDK 15.7 SP130 and it seems to be working fine.
Thanks,
Dawn Kim

Ssocfg fails - unable to establish secure connection to OID on port 636

Similar Messages

Maybe you are looking for