SSPI Connector for weblogic

Hi,
I have to integrate OAM with Weblogic directly and in our environment we have multiple webservers through which the enduser will access the application.So, I have some doubts for implementing this:
Could anyone please clarify if we can configure SSPI connector with multiple webgates?
Can we install SSPI connector without the proxy server ( without webgate being installed) ? If yes, Please provide the link which provides the information for the same.
Thanks in Advance.

Hi Mahendra,
Thanks for your response.
As per my understanding, while installing SSPI connector we have to specify the name of webgate instance with which SSPI communicates to OAM. In our environment we have loadbalancer configured for eight webservers and there is a webgate on each of these servers. The enduser will access through the loadbalancer and the request can be catered by any one of these webgates.
If we establish a communication of SSPI with single webgate, whether SSPI can authenticate the users if that webserver goes down ?
In the link provided, it was mentioned we can install the SSPI without webgate, does this mean we can establish direct communication between SSPI and OAM ?
Also there is no seperate steps for SSPI-OAM direct integration.Could you please provide anyother doc/link , for installation of SSPI-OAM integration.

Similar Messages

Announcing J2EE Connector for Weblogic 6.0 SP1

          The Weblogic J2EE Connector Architecture Beta 2 is now available
          for download. This release supports the recently released Weblogic
          Server 6.0 SP1.
          To download the Weblogic J2EE Connector Beta, refer to either the
          Developer Center (http://developer.bea.com/code/wls.jsp) or Product
          Center (http://commerce.bea.com/downloads/weblogic_server.jsp)


Edit the registry.xml file and change "6.0 Beta" to "6.0"
-Greg
On 12 Mar 2001 10:02:19 -0800, "Raman Trikkur" <[email protected]>
wrote:
>
Hello Kumar,
Here is my registry.xml.
<?xml version="1.0" encoding="UTF-8"?>
<bea-product-information>
<host name="ramantrik2pc">
<product name="WebLogic Server" format="1.0">
<release level="6.0 Beta" Status="installed" InstallDir="D:\bea\wlserver6.0"
InstallTime="Mar 1, 2001 5:18:57 PM" InstallSet="Server">
     <component name="Program" />
     <component name="Samples" />
</release>
</product>
</host>
</bea-product-information>
Thanks for helping me figure this out. If this doesn't work,
I'll just try installing the whole package (WLS 6.0 with SP1
applied) as Xiang suggested.
Regards,
Raman
Kumar Allamraju <[email protected]> wrote:
could you post your registry.xml ?
Raman Trikkur wrote:
Hi,
I'm trying to get the service pack SP1 ((wls60sp1_upgrade_win.exe)
) installed on my NT box. I have wls 6.0 installed andworking.
After unpacking and choosing my bea home directory (D:\bea),I
get an error that says "Weblogic Server Service Pack1 Installation
failed. You do not seem to have Weblogic server 6.0installed for
BEAHOME D:\bea".
But that is untrue. I DO have it installed in D:\bea,and I have
the environment shell up by running setEnv.cmd and Iinvoked the
service pack installer from within that shell.
Is there anything I'm missing? Has anyone else encounteredthis
problem? Any help with this would be much appreciated.
Regards,
Raman

Site Minder Web Agent for Weblogic 6.1

Hello,
I am installing Netegrity Peoplesoft connector for Weblogic 6.1 on Solaris. For this as a prequisite I need to install a Site Minder Web Agent for Weblogic 6.1. Can anyone tell me from where I can download this ? appreciate your help

You need to contact Netegrity Sales representative and register for an evaluation.
KBL
Sreekumar <[email protected]> wrote:
Hello,
I am installing Netegrity Peoplesoft connector for Weblogic 6.1 on Solaris.
For this as a prequisite I need to install a Site Minder Web Agent for
Weblogic 6.1. Can anyone tell me from where I can download this ? appreciate
your help

OIM LDAP connector for internal WebLogic LDAP?

Has anyone ever used OIM to manage internal LDAP for WebLogic? I'm considering it for compliance reasons.

Interesting thought, but how is the authentication realm configured in WLS for you? If it's just the default authentication provider in your security realm then you got only 3-4 odd users to manage (an overkill to use connector?). Make sure that you manage those account as service accounts from OIM, you don't want to corrupt out our domain by accident.
-Bikash

Error while creating the Generic Connector for flatfile

Hi All,
I was trying to create the Generic connector for the flat file reconciliation. But i was throwed into errors. I'm using 11.1.1.3 OIM and as well as SOA also. I have been following the OIM 9 document to create the GENERIC connector.
i'm copying the error i got
<Mar 14, 2012 3:48:12 PM IST> <Warning> <XELLERATE.SERVER> <BEA-000000> <readme.txt is not a valid connector resource file.>
<Mar 14, 2012 3:48:12 PM IST> <Warning> <XELLERATE.SERVER> <BEA-000000> <readme.txt is not a valid connector resource file.>
<Mar 14, 2012 3:48:12 PM IST> <Error> <XELLERATE.WEBAPP> <BEA-000000> <Class/Method: CreateConnectorAction/imageScreen encounter some problems: >
java.lang.NullPointerException
at oracle.iam.platform.utils.OIMMessageResourcesUtil.getConnectorResourcesFromFile(OIMMessageResourcesUtil.java:964)
at oracle.iam.platform.utils.OIMMessageResourcesUtil.getConnectorResourceBundle(OIMMessageResourcesUtil.java:778)
at oracle.iam.platform.utils.OIMMessageResourcesUtil.getConnectorResources(OIMMessageResourcesUtil.java:764)
at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getConnectorResources(tcMessageResourcesUtil.java:215)
at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getMsgFromConnectorRes(tcMessageResourcesUtil.java:238)
at com.thortech.xl.webclient.util.tcMessageResourcesUtil.getLocalizedText(tcMessageResourcesUtil.java:66)
at com.thortech.xl.webclient.util.UIFacade.getUserDefLocalizedLabels(UIFacade.java:3024)
at com.thortech.xl.webclient.actions.CreateConnectorAction.imageScreen(CreateConnectorAction.java:1250)
at com.thortech.xl.webclient.actions.CreateConnectorAction.goNext(CreateConnectorAction.java:521)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
at com.thortech.xl.webclient.actions.CreateConnectorAction.execute(CreateConnectorAction.java:135)
at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1913)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:462)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.am.agent.wls.filters.OAMServletAuthenticationFilter.doFilter(OAMServletAuthenticationFilter.java:260)
at oracle.security.am.agent.wls.filters.OAMValidationSystemFilter.doFilter(OAMValidationSystemFilter.java:133)
at oracle.security.wls.oamagent.OAMAgentWrapperFilter.doFilter(OAMAgentWrapperFilter.java:121)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.XSSFilter.doFilter(XSSFilter.java:103)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:61)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:115)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:100)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
i'm just using a flat file which contents are normal.
#GTC Trusted Source
login,firstName,lastName,eMail,organization
RDUDE,Robert,Dude,[email protected],Xellerate Users
Can somebody help where i have done wrong for this. All my deployment is in oracle linux 4.5
Thanks,
Venkatesh

Follow the doc for 11g, guide you might be missing something:
http://docs.oracle.com/cd/E17904_01/doc.1111/e14309.pdf
Highlevel configuration steps (not all and exact) are:
-> Give it Name
-> select Reconciliation
-> Select Transport Provider and format provides
-> select Trusted Source Reconciliation
->provide flat file details
-> Source reconciliation staging and mapping
->finish
regards,
GP

Error installing OIM Connector for DB User Management

Hi!
I'm a newbie in OIM and trying to set up a lab environment for user provisioning and reconciliation.
I have installed: WebLogic 10.3.3; OIM 11.1.1.3; Oracle Database 11g 11.2.0.1.0
In order to configure the OIM connector for DB User Management, I am following the OIM Connector Guide for Database User Management (http://docs.oracle.com/cd/E22999_01/doc.111/e28315/deploy.htm#CHDHAJCA) for the installation steps:
In the Step 2: Connector Installation the Import of Connector XML Files is failing. The error displayed is:
DOBJ.XML_IMPORT_ERROR
Duplicate OUG
I found these error messages from the STDOUT of the OIM Server:
<Error> <XELLERATE.DATABASE> <BEA-000000> <Class/Method: tcDataBase/writeStatement encounter some problems: ORA-00001: unique constraint (DEV_OIM.PK_OUG) violated
<Error> <XELLERATE.DDM.IMPORT> <BEA-000000> <Insert failed.>
<Error> <XELLERATE.DDM.IMPORT> <BEA-000000> <Exception during import
com.thortech.xl.ddm.exception.DDMException: Duplicate OUG
Can you please help me in solving this issue?
Much thanks in advance.
Edited by: user769080 on Jun 27, 2012 12:35 AM

Try to research into these tables OUG(List to define the administrators for each Resource Resource) , obj and ugp.
Something like this:
select obj.obj_name, oug.oug_write,oug.oug_delete,oug.oug_data_level,ugp.ugp_name from obj,oug,ugp where obj.obj_key=oug.obj_key and oug.ugp_key=ugp.ugp_key
PK_OUG is a unique key that control (oug.obj_key and oug.ugp_key) together into OUG table. So, if you already have this information that it's trying to insert you will see this error. Probably because of a previous installation. Check CIH table if it already have some information about this connector, probably someone already tried to install this before.
I hope this helps,
Thiago Leoncio.

Windows SharePoint Services Connector for WebDAV is now available

The Windows SharePoint Services Connector for WebDAV is now available for download as described in my
<a href="https://weblogs.sdn.sap.com/pub/wlg/4128">weblog</a>.

no information on MA configuration is included
http://technet.microsoft.com/en-us/library/dn511003%28v=ws.10%29.aspx

Eclipse Enterprise Pack for Weblogic 10.3

Hi
When can we anticipate an Oracle Enterprise Pack for Eclipse with connectors to WebLogic 10.3?
Is there a workaround for using the latest OEP 11gR1 patch set 1(released october 2009 and expects WebLogic 10.0) with 10.3?
Best regards,
Henrik
Never mind. I was trying the BEA runtime environments, but it was in the Oracle section all along.
Edited by: user10202831 on Oct 13, 2009 2:44 AM

Can someone help me !?
Thanks!

CICS connector for HPUX-11

Hi all,
          I am looking for a CICS connector that should run on weblogic 6.0 sp1
          running on HPUX-11. I had a look a the connector at
          http://www.comporsys.com but this connector seems to be dependent on a
          CICS Transaction Gateway form IBM. This would be fine but there doesn t
          seem to a Gateway for HPUX.
          Has anybody used a connector for CICS?
          I would be greatful for any information that anyone can give.
          Thanks,
          Daniel Bevenius


Yes, I have been in contact with BEA about this matter and just as you
          said it will be compatible in a futur release. Unfortunately this will
          be sometime next year.
          I'm currently looking into what IBM has to offer in this area.
          Robert Patrick wrote:
          > I believe that JAM will be changed to use J2EE CA in a future release (of
          > course, it is bi-directional so that piece will not be compatible until
          > sometime after Version 2 of the J2EE CA spec is released...).
          >
          > Daniel Bevenius wrote:
          >
          >> Hi,
          >>
          >> we are currently using the JAM adapter but it does not fulfill the J2EE
          >> Connector Architecture specification.
          >> I have contacted a few of the companies from the url below but of the
          >> two companies I contacted, Attunity Connect could not provide a
          >> solution, and I'm waiting for a reply from Actional Corportation.
          >> Has anyone used an J2EE complient adapter with CICS?
          >> Thanks,
          >>
          >> Daniel
          >>
          >> Robert Patrick wrote:
          >>
          >>> BEA also has an adapter called JAM that supports bi-directional access to
          >>> CICS...
          >>>
          >>> Christopher Allen wrote:
          >>>
          >>>> Two CICS adapters are listed in this "Adapter Availability Matrix":
          >>>>
          >>>> http://www.bea.com/products/servers_integration/adaptermatrix.shtml
          >>>>
          >>>> nospam@nospam wrote:
          >>>>
          >>>>> Hi all,
          >>>>> I am looking for a CICS connector that should run on weblogic 6.0 sp1
          >>>>> running on HPUX-11. I had a look a the connector at
          >>>>> http://www.comporsys.com but this connector seems to be dependent on a
          >>>>> CICS Transaction Gateway form IBM. This would be fine but there doesn t
          >>>>> seem to a Gateway for HPUX.
          >>>>> Has anybody used a connector for CICS?
          >>>>> I would be greatful for any information that anyone can give.
          >>>>> Thanks,
          >>>>>
          >>>>> Daniel Bevenius
          >>>>

Error while adding a connector for SSL..help!!!

i'm getting this error when i added a connector for SSL and restarted tomcat
my connector tag is
<Connector keystorePass="kalima" scheme="https" port="8443" sslProtocol="TLS" redirectPort="-1" enableLookups="true" keystoreFile="Mykeystore" protocol="TLS" keystore="C:\Documents and Settings\santhoshyma\Mykeystore" clientauth="false" algorithm="SunX509" keypass="changeit" secure="true" keytype="JKS">
      <Factory className="org.apache.coyote.tomcat5.CoyoteServerSocketFactory" keystorePass="kalima" keystoreFile="C:\SSLTest\Mykeystore"/>
    </Connector>
LifecycleException: Protocol handler instantiation failed: java.lang.NullPointe
rException
        at org.apache.coyote.tomcat5.CoyoteConnector.initialize(CoyoteConnector.
java:1368)
        at org.apache.catalina.core.StandardService.initialize(StandardService.j
ava:609)
        at org.apache.catalina.core.StandardServer.initialize(StandardServer.jav
a:2384)
        at org.apache.catalina.startup.Catalina.load(Catalina.java:507)
        at org.apache.catalina.startup.Catalina.load(Catalina.java:528)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:324)
        at org.apache.catalina.startup.Bootstrap.load(Bootstrap.java:250)
        at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:424)

The question is answered in CRM 7.0 forum:
Getting error while adding a custom field (with input help) through AET

BPM for Weblogic configuration is failed

1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear, to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear, to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?

Hi,
Thanks for your reply. I change the file and reconfigure the BPM for weblogic. However, it is still failed in 70-72%.
-------------------log message-------------------------------
TO_MSG PATH=/root/bea/wlserver_10.3/server/bin:/root/bea/modules/org.apache.ant_1.6.5/bin:/root/bea/jrockit_160_05/jre/bin:/root/bea/jrockit_160_05/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin:/root/bin
TO_MSG
TO_MSG Your environment has been set.
TO_MSG
TO_MSG CLASSPATH=/root/bea/patch_wlw1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_wls1030/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/patch_cie660/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/root/bea/jrockit_160_05/lib/tools.jar:/root/bea/wlserver_10.3/server/lib/weblogic_sp.jar:/root/bea/wlserver_10.3/server/lib/weblogic.jar:/root/bea/modules/features/weblogic.server.modules_10.3.0.0.jar:/root/bea/wlserver_10.3/server/lib/webservices.jar:/root/bea/modules/org.apache.ant_1.6.5/lib/ant-all.jar:/root/bea/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/root/OraBPMwlHome/lib/fuego.boot.jar:/root/OraBPMwlHome/bin/./:/root/OraBPMwlHome/bin/./lax.jar::/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbembedded57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbtools57.jar:/root/bea/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar
TO_MSG
TO_MSG Initializing WebLogic Scripting Tool (WLST) ...
TO_MSG
TO_MSG Welcome to WebLogic Server Administration Scripting Shell
TO_MSG
TO_MSG Type help() for help on available commands
TO_MSG
TO_MSG Starting server BPMServer
TO_MSG Please see the server log files for startup messages available at /root/weblogic3/bpm
TO_MSG Starting weblogic server ...
TO_MSG WLST-WLS-1249792014056: [WARN ] -XX:MaxPermSize=256m is not a valid VM option. Ignoring
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ26￥ﾈﾆ58￧ﾧﾒ CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.6.0-50_o-100423-1.6.0_05-20080626-2104-linux-ia32 from BEA Systems, Inc.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ00￧ﾧﾒ CST> <Info> <Management> <BEA-140013> </root/weblogic3/bpm/config/config.xml not found>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ00￧ﾧﾒ CST> <Info> <Management> <BEA-141254> <Generating new domain directory in /root/weblogic3/bpm>
TO_MSG .....WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ12￧ﾧﾒ CST> <Info> <Management> <BEA-141255> <Domain generation completed in 12,326 milliseconds.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ13￧ﾧﾒ CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3 Fri Jul 25 16:30:05 EDT 2008 1137967 >
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ15￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ15￧ﾧﾒ CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ16￧ﾧﾒ CST> <Notice> <Log Management> <BEA-170019> <The server log file /root/weblogic3/bpm/servers/BPMServer/logs/BPMServer.log is opened. All server side log events will be written to this file.>
TO_MSG ...WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ24￧ﾧﾒ CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
TO_MSG ....WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ34￧ﾧﾒ CST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
TO_MSG .WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ35￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "BPMServer" for domain "bpm" running in Development Mode>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ36￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ36￧ﾧﾒ CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
TO_MSG Server started successfully.
TO_MSG Started Server. Trying to connect to the server ...
TO_MSG Connecting to t3://localhost.localdomain:7001 with userid weblogic ...
TO_MSG Successfully connected to Admin Server 'BPMServer' that belongs to domain 'bpm'.
TO_MSG
TO_MSG Warning: An insecure protocol was used to connect to the
TO_MSG server. To ensure on-the-wire security, the SSL port or
TO_MSG Admin port should be used instead.
TO_MSG
TO_MSG Location changed to edit tree. This is a writable tree with
TO_MSG DomainMBean as the root. To make changes you will need to start
TO_MSG an edit session via startEdit().
TO_MSG
TO_MSG For more help, use help(edit)
TO_MSG
TO_MSG Starting an edit session ...
TO_MSG Started edit session, please be sure to save and activate your
TO_MSG changes once you are done.
TO_MSG creating mbean of type JMSServer ...
TO_MSG creating mbean of type JMSSystemResource ...
TO_MSG creating mbean of type SubDeployment ...
TO_MSG creating mbean of type Queue ...
TO_MSG creating mbean of type Topic ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type ConnectionFactory ...
TO_MSG creating mbean of type Server ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type JDBCSystemResource ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Property ...
TO_MSG creating mbean of type Realm ...
TO_MSG creating mbean of type RoleMapper ...
TO_MSG creating mbean of type CredentialMapper ...
TO_MSG creating mbean of type CertPathProvider ...
TO_MSG creating mbean of type Authorizer ...
TO_MSG creating mbean of type Adjudicator ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG creating mbean of type AuthenticationProvider ...
TO_MSG setting attributes for mbean type JMSServer
TO_MSG setting attributes for mbean type JMSSystemResource
TO_MSG setting attributes for mbean type SubDeployment
TO_MSG setting attributes for mbean type Queue
TO_MSG setting attributes for mbean type Topic
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type JMSConnectionFactory
TO_MSG setting attributes for mbean type Server
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type DefaultIdentityAsserter
TO_MSG setting attributes for mbean type SecurityConfiguration
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type EmbeddedLDAP
TO_MSG setting attributes for mbean type SecurityParams
TO_MSG setting attributes for mbean type Domain
TO_MSG setting attributes for mbean type JDBCDataSource
TO_MSG setting attributes for mbean type JDBCXAParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCConnectionPoolParams
TO_MSG setting attributes for mbean type JDBCDriverParams
TO_MSG setting attributes for mbean type JDBCDataSourceParams
TO_MSG setting attributes for mbean type JDBCSystemResource
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG setting attributes for mbean type JDBCProperty
TO_MSG Saving all your changes ...
TO_MSG Saved all your changes successfully.
TO_MSG Your edit session is not stopped, you can continue your edits.
TO_MSG Activating all your changes, this may take a while ...
TO_MSG The edit lock associated with this edit session is released
TO_MSG once the activation is completed.
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute InternalAppsDeployOnDemandEnabled on weblogic.management.configuration.DomainMBeanImpl@fffe8220([bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@1759a12([bpm]/Log[bpm]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute ListenAddress on weblogic.management.configuration.ServerMBeanImpl@2ddd7637([bpm]/Servers[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.LogMBeanImpl@2df105fa([bpm]/Servers[BPMServer]/Log[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141239> <The non-dynamic attribute RotateLogOnStartup on weblogic.management.configuration.WebServerLogMBeanImpl@2df106e5([bpm]/Servers[BPMServer]/WebServer[BPMServer]/WebServerLog[BPMServer]) has been changed. This may require redeploying or rebooting configured entities>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ27￥ﾈﾆ53￧ﾧﾒ CST> <Warning> <Management> <BEA-141238> <A non-dynamic change has been made which affects the server BPMServer. This server must be rebooted in order to consume this change.>
TO_MSG
TO_MSG The following non-dynamic attribute(s) have been changed on MBeans
TO_MSG that require server re-start:
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Log,Server=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=Server
TO_MSG Attributes changed : ListenAddress
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Log
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG MBean Changed : com.bea:Name=bpm,Type=Domain
TO_MSG Attributes changed : InternalAppsDeployOnDemandEnabled, ProductionModeEnabled
TO_MSG
TO_MSG MBean Changed : com.bea:Name=BPMServer,Type=WebServerLog,Server=BPMServer,WebServer=BPMServer
TO_MSG Attributes changed : RotateLogOnStartup
TO_MSG
TO_MSG Activation completed
TO_MSG Creating a user ...
TO_MSG
TO_MSG Created user successfully
TO_MSG Deploying application from /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ28￥ﾈﾆ01￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: /root/OraBPMwlHome/j2ee/weblogic/deployer/wlj2eedeployer.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ28￥ﾈﾆ08￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine [archive: /root/OraBPMwlHome/ears/engine/01-eng-bpmengine.ear], to BPMServer .>
TO_MSG .................Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ29￥ﾈﾆ48￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 08-workspace-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/08-workspace-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ30￥ﾈﾆ45￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 09-feeds-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/09-feeds-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ00￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 06-workspaceadmin-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/webapps_expanded/06-workspaceadmin-XAFDIDS.ear], to BPMServer .>
TO_MSG .Completed the deployment of Application with status completed
TO_MSG Current Status of your Deployment:
TO_MSG Deployment command type: deploy
TO_MSG Deployment State : completed
TO_MSG Deployment Message : no message
TO_MSG Deploying application from /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear to targets BPMServer (upload=true) ...
TO_MSG <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ31￧ﾧﾒ CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 07-papiws-wls103-XAFDIDS.ear [archive: /root/OraBPMwlHome/ears/webapps/07-papiws-wls103-XAFDIDS.ear], to BPMServer .>
TO_MSG ..WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ48￧ﾧﾒ CST> <Error> <HTTP> <BEA-101220> <Error occurred while setting document root for "weblogic.servlet.internal.WebAppServletContext@30302d0 - appName: '07-papiws-wls103-XAFDIDS.ear', name: 'papiws', context-path: '/papiws', spec-version: '2.5'" to "/root/weblogic3/bpm/servers/BPMServer/tmp/_WL_user/07-papiws-wls103-XAFDIDS.ear/f0r1c0/papiws.war".>
TO_MSG WLST-WLS-1249792014056: <2009-8-9 ￤ﾸﾋ￥ﾍﾈ12￦ﾗﾶ31￥ﾈﾆ48￧ﾧﾒ CST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1249792304208' for task '5'. Error is: 'weblogic.application.ModuleException: Failed to load webapp: 'papiws''
TO_MSG WLST-WLS-1249792014056: weblogic.application.ModuleException: Failed to load webapp: 'papiws'
TO_MSG WLST-WLS-1249792014056:      at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:387)
TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:176)
TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
TO_MSG WLST-WLS-1249792014056:      at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:387)
TO_MSG WLST-WLS-1249792014056:      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
TO_MSG WLST-WLS-1249792014056:      Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: java.io.IOException: Error opening file
TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.open(Native Method)
TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.<init>(ZipFile.java:117)
TO_MSG WLST-WLS-1249792014056:      at java.util.zip.ZipFile.<init>(ZipFile.java:133)
TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.classloaders.ZipClassFinder.<init>(ZipClassFinder.java:23)
TO_MSG WLST-WLS-1249792014056:      at weblogic.application.io.ArchivedWar$WebInfClassesFinder.<init>(ArchivedWar.java:290)
TO_MSG WLST-WLS-1249792014056:      Truncated. see log file for complete stacktrace
TO_MSG WLST-WLS-1249792014056: >
TO_MSG WLST-WLS-1249792014056: java.io.FileNotFoundException: /root/weblogic3/bpm/config/config.xml (Too many open files)
TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.open(Native Method)
TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.<init>(FileOutputStream.java:179)
TO_MSG WLST-WLS-1249792014056:      at java.io.FileOutputStream.<init>(FileOutputStream.java:131)
TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.FileUtils.writeToFile(FileUtils.java:115)
TO_MSG WLST-WLS-1249792014056:      at weblogic.utils.Fil

Configuration is failed - BPM for Weblogic 10.3.1

1, I install BPM for Weblogic.
2, I create a domain for weblogic using config tool and start it.
3, I create a new directory.
However, the configuration is failed.
The BPM for weblogic is installed in XP and the window of selecting JDK is not pop out.
The log is as follows:
For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your
changes once you are done. creating mbean of type JMSServer ... creating mbean of type JMSSystemResource ... creating mbean of type SubDeployment ... creating mbean of type Queue ... creating mbean of type Topic ... creating mbean of type ConnectionFactory ... creating mbean of type ConnectionFactory ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type JDBCSystemResource ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... creating mbean of type Property ... setting attributes for mbean type JMSServer setting attributes for mbean type JMSSystemResource setting attributes for mbean type SubDeployment setting attributes for mbean type Queue setting attributes for mbean type Topic setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JMSConnectionFactory setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCDataSource setting attributes for mbean type JDBCXAParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCConnectionPoolParams setting attributes for mbean type JDBCDriverParams setting attributes for mbean type JDBCDataSourceParams setting attributes for mbean type JDBCSystemResource setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty setting attributes for mbean type JDBCProperty Saving all your changes ... Saved all your changes successfully. Your edit session is not stopped, you can continue your edits. Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
once the activation is completed. Activation completed Creating a user ... Created user successfully Deploying application from E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:44 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, wlj2eedeployer [archive: E:\OraBPMwlHome20090715WebLogic\j2ee\weblogic\deployer\wlj2eedeployer.ear], to examplesServer .> .Completed the deployment of Application with status completed Current Status of your Deployment: Deployment command type: deploy Deployment State : completed Deployment Message : no message Deploying application from E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear to targets examplesServer (upload=true) ... <Jul 15, 2009 12:11:54 PM CST> <Info> <J2EE Deployment SPI> <BEA-260121> <Initiating deploy operation for application, 01-eng-bpmengine3 [archive: E:\OraBPMwlHome20090715WebLogic\ears\engine\01-eng-bpmengine3.ear], to examplesServer .> Failed to deploy the application with status failed Current Status of your Deployment: Deployment command type: deploy Deployment State : failed Deployment Message : java.lang.OutOfMemoryError: Java heap space No stack trace available. This Exception occurred at Wed Jul 15 12:12:17 CST 2009. weblogic.management.scripting.ScriptException: Error occured while performing deploy : Deployment Failed. at weblogic.management.scripting.ExceptionHandler.handleException(ExceptionHandler.java:48) at weblogic.management.scripting.WLSTUtils.throwWLSTException(WLSTUtils.java:185) at weblogic.management.scripting.JSR88DeployHandler.deploy(JSR88DeployHandler.java:536) at weblogic.management.scripting.WLScriptContext.deploy(WLScriptContext.java:429) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:160) at org.python.core.PyMethod.__call__(PyMethod.java:96) at org.python.core.PyObject.__call__(PyObject.java:248) at org.python.core.PyObject.invoke(PyObject.java:2016) at org.python.pycode._pyx17.deploy$8(<iostream>:223) at org.python.pycode._pyx17.call_function(<iostream>) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:404) at org.python.core.PyFunction.__call__(PyFunction.java:184) at org.python.pycode._pyx16.deploy_Applications$61(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:623) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyTableCode.call(PyTableCode.java:256) at org.python.core.PyFunction.__call__(PyFunction.java:169) at org.python.pycode._pyx16.f$0(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py:738) at org.python.pycode._pyx16.call_function(C:\Documents and Settings\Administrator\.configWizard\tmp\config.py) at org.python.core.PyTableCode.call(PyTableCode.java:208) at org.python.core.PyCode.call(PyCode.java:14) at org.python.core.Py.runCode(Py.java:1135) at org.python.util.PythonInterpreter.execfile(PythonInterpreter.java:167) at weblogic.management.scripting.WLST.main(WLST.java:129) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at weblogic.WLST.main(WLST.java:29)
Exiting WebLogic Scripting Tool.
<Jul 15, 2009 12:12:17 PM CST> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.> QuestionConfirm Action
Do you want to cancel this wizard?

Hi Ye,
I noticed this afternoon that Oracle's refering to Oracle WebLogic 10.3.1 as "Oracle WebLogic 11g".
Know this comes as no surprise to you, but when I tried to install Oracle BPM 10gR3 Enterprise on WebLogic 11g (WebLogic 10.3.1) this afternoon it failed. A friend pointed out to me that Oracle WebLogic 11g does not support the DataDirect JDBC driver. Since Oracle BPM Enterprise 10gR3 uses this driver to connect to both its Engine database and Directory Service databases, he's thinking this might be the cause of our problem.
It would be worth verifying this with Support. Here's what I think they'll point you to. The Oracle BPM 10gR3 release notes(http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/relnotes/release_notes_OracleBPM10gR3.htm#N65589) indicate that the only WebLogic application servers supported are Oracle WebLogic 10.3 (10gR3), Oracle WebLogic 10.0 MP1.
Again, talk to Support, but I don't think there's a workaround. The only thing I think you can do is to uninstall WebLogic 10.3.1 and then install WebLogic 10.3 if you want to install Oracle BPM 10gR3 Enterprise on it.
Dan

How can I list all the domains configured for Weblogic Servers?

How can I list all the domains configured for Weblogic Servers?
I saw a note, which says the following:
"WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
In my case, I just want to list all the domains, is that possible by using any scripts?
Thanks
AJ

If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
<MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

DMS Connector for KM : I see only one document type from the document area

Hi,
The DMS connector is installed successfully on KM.
I can display folder tree and documents but I see only one type of document.
I mean, when I use transaction OAC0, I see different content repository defined in DMS.
I wonder where is the setting that specified which content is link to the DMS connector for KM.
Thanks in advance.

Hello Zbynek,
I installed the DMS once, but my experience how to use it is poor.
In the Backend ( Transaction CV01N i think,) you can store search variants using the prefix you have defined for the DMSRM (default is KM_<theName>). This variants can be used to filter out several documents. There must be a way to give authorizations on them. Maybe you will have to use a security manager, i don't know.. in our case the user persistence (authScheme) was SAP-System an no TREX involved.
It is not much, but maybe it helps...
best regards
Guido

OIM 9.1.0 install connector for "Oracle Database 10g"

Hello,
Is anybody here who succeeded to install the connector for Oracle Database 10g into OIM 9.1.0?
If yes please give me a hint
Have a nice day!

Thanks guys for the quick responses.
But I have tried both the options for putting the jar in Third Party and also by uploading using the OOTB utility UploadJar.sh.
But it is giving the same error.
I have tired rebouncing the server and also Purge cached, but no success.
Just to mention again, I have tried with all the last 3 postgres JDBC4 driver available on the site (u mentioned).
So, any other clue?
Thanks in advance.

SSPI Connector for weblogic

Similar Messages

Maybe you are looking for