SSPU issue: Cache directory does not exist, and couldn't create a new downl

I have installed SSPU and created an offer over there. When I run my offer it gives the error:
Cache directory does not exist, and couldn't create a new download cache directory.
Can anyone tell me the root cause and workaround for this issue?

Hi
Try deleting the "offer" directory from SSPU home and then delete the offer from Sub-Client . Restart client and then add the provider . Start pushing the content from SSPU and see if the issue still persists .
Thanks
Srinath

Similar Messages

  • Cluvfy returns Path "/tmp/" does not exist and cannot be created on nodes

    Hi,
    I'm installing Oracle RAC for SAP in AIX 5L.
    After run Pre-check for cluster services setup it returns the next message:
    Path "/tmp/" does not exist and cannot be created on nodes
    This meessage is happening after Checking node reachability and Checking user equivalence phases.
    This is my complete log:
    pr_bd01/oramedia/clusterware/Disk1/cluvfy/> ./runcluvfy.sh stage -pre crsinst -n pr_bd01,pr_bd02
    Performing pre-checks for cluster services setup
    Checking node reachability...
    Node reachability check passed from node "pr_bd01".
    Checking user equivalence...
    User equivalence check passed for user "oracle".
    ERROR:
    Path "/tmp/" does not exist and cannot be created on nodes:
    pr_bd01
    Verification will proceed with nodes:
    pr_bd02
    Pre-check for cluster services setup was unsuccessful on all the nodes.
    The /tmp is a shared filesystem and oracle user can write and read it
    Oracle user id is the same in both nodes
    Group dba id is the same in both nodes
    Group oinstall id is the same in both nodes
    The primary group for Oracle user is oinstall
    Where can my problem be ?
    Thank you
    Edited by: user8114467 on 27/02/2009 07:17 AM

    Hi,
    Even if this is not resolved from above stuff then do the following
    [[email protected]] ssh node1 date
    [[email protected]] ssh node2 date
    Note that it is doing the ssh to itself rather than the remaining node(s). Usually people do forget to do atleast once the ssh to itself.
    Talok Khatri

  • Pkg cache directory does not exist

    at the very firts time when 'pacman --sync' is issued
    pacman complains that cache dir doesn't exist in /var/cache/pacman
    it would be configured by default for a newbie like me
    [[email protected] root]# pacman --sync xautolock
    Targets: xautolock-2.1-1
    Do you want to install/upgrade these packages? [Y/n]
    :: Downloading packages...
    warning: no /var/cache/pacman/pkg cache exists.  creating...
    warning: couldn't create package cache, using /tmp instead
    xautolock-2.1-1.pkg.tar. [#################################] 100% |     13K
    checking for conflicts... done.
    installing xautolock... done.

    pacman version is 2.0 with AL 0.3(stock kernel 2.4.19)
    [[email protected] rc.d]# pacman --version
    .--.                    Pacman v2.0
    / _.-' .-.  .-.  .-.     Copyright (C) 2002 Judd Vinet <[email protected]>
      '--'                    This program may be freely redistributed under
                               the terms of the GNU GPL
    [[email protected] rc.d]# uname -a
    Linux pacman 2.4.19 #1 SMP Mon Aug 5 21:50:31 PDT 2002 i686 unknown
    i installed AL 0.3 with cdrom image
    ody wrote:What version of AL / pacman are you running and what install procedure did you follow?

  • File Adapter: Target directory does not exist

    Hi All,
    Using RFC to File Scenario.
    While processing in File adapter, i get following error for the target directory.
    Delivering the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Target directory '
    *********************\Out' does not exist and cannot be created.
    Although I am able to use the same target directory on my local machine.

    I think FTP user didnt have suffiecinet otherrization to create directory in FTP, check once again Directory format entered is correct.
    if you have phycial access to FTP then create one folder and enter the same in File channel and push one message and let us know the result.
    Regards,
    Raj

  • ~/oradiag_$USER/.. and "Directory does not exist for read/write" issue

    Hi.
    Recently I've discovered that ADR was creating a folder in one of ours Oracle 11.2.0.1 server, in the users home like ~/oradiag_$USER/.. The problem is that this logging files dont stop growning, and they are filled only with this lines:
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:40:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    Wed Apr 11 13:41:06 2012
    Directory does not exist for read/write [usr/oracle/product/11.2.0/log] [usr/oracle/product/11.2.0/log/diag/clients]
    etc
    I've searched around internet about this issue all that I've found is a "workaround" by creating those folders. And yep, it works, it stops growning.
    Then I checked the others servers that we have, and the problem replicates in some servers with the same Oracle version.
    My question is: Why this? Why in some servers ADR is looking for that folder? That folder didnt exist in any of them, but only some servers tries to read/write on it (or, at least, log it) What parameter relies on it?
    Regards.

    Metalink note
    11g Sqlnet Log Shows Error "Directory does not exist for read/write" [ID 797678.1]
    Errors Filling log.xml and sqlnet.log: Directory does not exist for read/write [opt/oracle/oemagent/agent11g/log] [ID 1291286.1]

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • Input File repository server Error: The requested directory does not exist.

    Hi,
    Getting following error "The requested directory does not exist." for Input and Out put file repository server.
    The specfied directory exists and the user has local administrative privelges with full control of the IFRS and OFRS location.
    The location was earlier working and after trying to implement Windows AD the things stopped. Have tried reverting the things but the following issue still persists.
    Thanks,
    Manpreet

    @Siva,
    I am not using the defacult FRS, I have specfied a specfic location on which the user has full control.
    this was working prior to the Windows AD setup tried by me.

  • ADAWS Webapp Directory Does Not Exist

    Hello,
    When I do the test (Security Settings) by the URL http://localhost/adaws/install/writeFiles.aspx I have the following error: "ADAWS Webapp Directory Does Not Exist."
    Someone knows what are happening?

    Tech support told me:<br><br>
    "We have bug #60365 filed on this issue. The version number in WriteFiles.asp.vb is hardcoded to '6.2' and It will look through pthome.xml for this version of ID-AD and not find it. As a result, it will throw the 'Directory Does Not Exist' error. "<br><br>
    Basically, just ignore the diagnostic error as the remainder of the app is unaffected by it.

  • Specified directory does not exist

    Hi there,
    I'm having a wierd problem, and can't seem to find a way around it.
    I'm logging into my clients' version 5 SP10 application, and the "Finance" app works fine: all dimensions downloaded, all folders created locally, etc (today is the first day I've used my PC with this appset so I didn't have these locally previously).
    However, when I switch to my "interco" app, or any other, I get this error (NOTE: my user profile folder is on D not C):
    "The Specified directory does not exists: D:\Jason\Documents\Outlooksoft\<Server Name>\<User>\App Info\<Appset>\<Application>\eExcel"
    Sorry, not very easy to read!
    It doesn't seem to create these folders. But if I do it manually (through My Computer), the next time I log in I don't get the error - presumably because the folder has been created.
    My colleague has the exact same problem from the exact same application set, and we are using different Windows OSs (he is on XP and I'm on Vista) so it can't be that.
    Any ideas? I have worked at this client many times, but not since SP10 was applied - could that be the cause of the problem?
    Thanks as always!
    Jason

    Jason,
    I had the same issue with a few applications. SAP tech advised me to copy an application and it should re-create folder structure. Another approach is to process application without selecting any options - should also re-create folder structure, but I can't confirm this one.
    And 3rd way is to copy folder structure from a good (working) version of the same application into the "broken" one.
    Hope that helps,
    Akim

  • Copy web site ~/directory does not exist

    I have used VS Express 2010 for many years and have successfully copied files to our server. All of a sudden, I am getting the error "The ~/ directory does not exist" on the server side of the website copy screen. I contacted ISP and they say all
    looks good, but can't copy files to server. I upgraded to VS Express 2013 and am having the same problem.
    Is there a fix for this problem? ISP says it is something in my environment (Windows 7).

    Hi mhrrcweb,
    From the error message, I think that the Joel's suggestions are really help you, if possible, I suggest you can try Joel's suggestions check your issue in you side.
    In addition, since the forum is to discuss the VS IDE issue, however, the issue seems that it is related to the ftp publish. So if the Joel's suggestions still could not help you, I suggest you can ask the issue directly to IIS forum:http://forums.iis.net/ ,
    it will be better support.
    Thanks for your understanding.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Compiler warning: Source folder "server" does not exist and will be ignored

    Hi,
    i am using NWDS 7.0 SP16. I have a development component type "J2EE Sever Library", which uses a java component. Everything works fine, except during the build i get a warning "Warning: Source folder "server" does not exist and will be ignored.".
    Then i created the folder named "server" manually, but the build finished again with warning, now saying:
    "Warning: Source folder "server" exists but is empty and will be ignored."
    I created a dummy-file in the directory "server" and now the compilation is fine, no warnings.
    I like to get my build free of any warnings, so what's wrong here? I found no documentation to create the folder/file manually.
    Any help is appreciated.
    Regards,
    Thomas

    Hi Raman,
    I am also getting the same error . i moved my srm transports from DEV to QA and replicated the datasources into BI . and then i moved the BW transports from dev to QA.
    when i check the datasource it is pointing to D60 instead of Q60 . when i check the transformations getting the same error :
    source system dosen't exist.
    can you please let me know how you resolved this issue. your reply will be  highly appreciated.
    Regards,
    Sri

  • Import Error: The root directory does not exist

    Hi,
    I have some isuuses with importing the extended page. When I try to Import it throws an error.
    Root Directory does not exist.
    I am using the following command.
    import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
    G":
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
    Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
    abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
    be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
    mRN" because it violates scope restrictions.
    Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
    nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
    kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
    nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
    ause it violates scope restrictions.
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
    able style because it is inside "tableLayout".
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
    N" of stackLayout style because it is inside "tableLayout".
    Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
    tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
    referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
    ecause it violates scope restrictions.
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Import completed.
    But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
    Could suggest how to solve this problem.
    Thanks
    Prabhat

    Hi Tapash
    while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
    when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
    it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
    my concern is why i m getting this error
    my import command looks like this
    java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
    could u pls suggest some solution.

  • Import Error:Root Directory Does not exist

    Hi,
    I have some isuuses with importing the extended page. When I try to Import it throws an error.
    Root Directory does not exist.
    I am using the following command.
    import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
    G":
    Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
    Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
    Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
    abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
    be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
    mRN" because it violates scope restrictions.
    Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
    nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
    kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
    nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
    ause it violates scope restrictions.
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
    able style because it is inside "tableLayout".
    The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
    cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
    N" of stackLayout style because it is inside "tableLayout".
    Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
    "Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
    tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
    referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
    ecause it violates scope restrictions.
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Error: The root directory does not exist
    Import completed.
    But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
    Could suggest how to solve this problem.
    Thanks
    Prabhat

    Hi Tapash
    while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
    when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
    it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
    my concern is why i m getting this error
    my import command looks like this
    java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
    could u pls suggest some solution.

  • Error when trying to install the adobe creative suite exit code 39.I get the following error message Directory does not exist : /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall/Uninstall Product.app

    i have run the adobe cleaner , repaired disk permission and also tried to download and install several times.
    this is a mac osx running the yoshmite
    please help
    this is the error
    Exit Code: 39
    Please see specific errors below for troubleshooting. For example,  ERROR: DW042 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 2 error(s)
    ERROR: Directory does not exist : /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall/Uninstall Product.app
    ERROR: DW042: ARP Entry couldn't be created for language : en_US

    Oliviat14nov does /Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/uninstall exist on your computer? 

  • Deploying custom page to MDS respository: The root directory does not exist

    Hi,
    with XMLImport, I have
    java oracle.jrad.tools.xml.importer.XMLImporter /u01/jdevhomes/sjallerat/jdevhome/myprojects/technip/oracle/apps/xxepc/deploying/webui -jdk13 -mmddir "/u01/jdevhomes/sjallerat/jdevhome/myhtml/OA_HTML/jrad" -username apps -password venus -rootdir /u01/jdevhomes/sjallerat/jdevhome/myprojects -validate -dbconnection "(description = (address_list = ( address =(protocol = tcp)(host = xxxxxxxxxxxxxxxxx)(port = xxxx)))(connect_data = (sid = xxxx)))"
    Importing /technip/oracle/apps/xxXXX/deploying/webui/EpcTestMessagesPG
    Error: The root directory does not exist.
    xxXXX is new. With existing app, add one module .xml is OK.
    Thank you for yor help.
    Serge

    We have registered XXYYY as a new application in our instance of oracle application with a basepath = XXYYY_TOP.
    And add in Linux's file xxxxxx.env the declaration : XXYYY_TOP with rootpath = /xxxxxxx/oracle/xxxappl/XXYYY/11.5.0.
    Let us must be made another statement in another file?
    Thank you.

Maybe you are looking for

  • Wireless Router Help Needed! Please and Thank You

    My warrenty has expired on my router, and Linksys is conveniently not able to help me get my router back on track.  I have had the same problem several times, and have had the steps wrote down to fix it however, I have recently moved into a new place

  • Stage size for a Flash website?

    I am taking a beginners Flash course and our final project is to create a movie/website in Flash. 100% Flash based. In a previous course, I made an HTML site. For this project, I am recreating that website in Flash. But what should the stage size be?

  • My mbp randomly reboots since Mountain Lion OSX update.

    Randomly my MBP purchased in summer of 2009 reboots and I get the following error message: Interval Since Last Panic Report:  1311 sec Panics Since Last Report:          2 Anonymous UUID:                    3CFA17E3-7E67-48CE-A7A2-C02B3F5BCC78 Sun Ju

  • Iphone and road runner email

    Has anyone had any luck placing road runner (time warner email) on their iphone. Both Apple and Road Runner tried but to no avail. Weird thing, I have had 3 previous iphones and have had rr on there every time.

  • What do I do to make Elements Organizer 13 upload pictures to Adobe Revel?

    I can't sign in to Adobe Revel to sync my photos. When I try to sign it it says there is a error contacting the server. I can open my web browser and go to Revel account and view the pictures I have already uploaded  so I know my password is not the