SSRS 2005 - How to format a time column so it shows as HH:MM?

Hi all
I have a field called ScheduledTime. If I include this field in a report, that column displays time as 39916, etc. It is always a 5 digit number. How can I format that report column so that the time shows as the actual time in a HH:mm format? eg 23:57,
01:06, etc. I have already set the column format to t, T, HH:mm, but none of them works
Thanks
Naz

I think below expression would work..
=format(DateAdd("s",Fields!timeField.Value,"1/1/2000"),"HH:mm")
Replace Fields!timeField.Value with your report specific field
Cheers,

Similar Messages

How to create a time column

hi all
i have a table to define the users
i want to add a new two columns that define the time which the user can login in that time defined in the table of the user
and every time the user login , it will check the login time with the time interval defined in the user table
what are the data types of the 2 columns interval_from and interval_to
or
how can i implement that without a trigger on the database

What Forms version are you using? If you are using Forms 10g you will need to set your Forms item datatype to "DATETIME" otherwise the Format Mask magoo suggests will only show zeros (0) for the time. If you are using Forms 6i, then just the format mask is needed. If you are using Forms 9i, I suggest you check if Forms 9i supports the DATETIME data type (it has been too long since I've used 9i and I don't have it installed where I could check).
Hope this helps.
Craig...
If my response or the response of another was helpful, please mark it accordingly

SSRS 2005 - Dynamically control the width of columns in Matrix report or Hide any column

Hi All,
I just want to hide some column without having white space in Matrix report in SSRS 2005. Although I am aware of that perhaps this feature is not available on SSRS 2005. So, I just want to know if we can handle the width of column dynamically(using expressions)
in matrix report?
Please help. Thanks in Advance.
Regards
Kumud

Hi Kumud,
Based on my test, SSRS is not support column dynamically width. It has property “CanGrow” of text box. If we configure the property to True, it will wraps to next line if needed. In SSRS 2008, we can hide some columns without white space. If possible, I
recommend you update your SSRS 2005 to SSRS 2008.
There is a similar issue, you can refer to it.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/9e6043f1-c458-4540-be59-d37b02feab8a/dynamic-column-width-for-a-report?forum=sqlreportingservices
Alternatively, I recommend you that submit a wish to the Microsoft Connect at
https://connect.microsoft.com/SQLServer/Feedback. Your feedback is valuable for us to improve our products and increase the level of service provided.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

SSRS 2005 check render format

Hi, My SSRS 2005 Report Contain Hyperlinks.
When I am exporting this Report into PDF, inside PDF this Hyperlink still showing up and when i click on that, it is redirect on that link.
I want the Hyperlink Active in Report Manager , not after Exporting to PDF.
How can we Remove Hyperlink, when rendering to PDF ? or how can i possibly check is the report is interactive
Thanks !!!

SSRS 2005 does not have RenderFormat !
Ah sorry I missed you're on SSRS 2005
Then only way is to create a separate version for PDF with those hyperlinks removed and call it via link from main report by specifying full report viewer url for the report
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How do you get table column names to show one time per page

I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
Susie

I figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie

Time column duration not showing for my podcast

the time column duration is not showing for my podcast shows on the iTunes Store: https://itunes.apple.com/us/podcast/income-press-podcast-blogging/id500448874
For some odd reason it just stopped showing the duration.
Any help or ideas would greatly be appreciated.
Thanks,
Joey

Your feed is at http://feeds.feedburner.com/incomepresspodcast
You have no 'itunes:duration' tags in the feed, which are necesssary for the duration to show in the Store and when subscribing, though in that case the duration will show once the show has downloaded as the iTunes application will detect it from the file itself. In order to show the duration in the Store you need to add this tag, though I can't advise on how to go about it in Wordpress.

How can i set a column which would show me the name of the user

how can i write a trigger which would show me the name of the user now make changes in the table.

872959 wrote:
how can i write a trigger which would show me the name of the user now make changes in the table.I think what sb is trying to say is: if you mean the database user, you can use the USER session variable to identify the database user:
http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions227.htm#SQLRF06156
you would write a before each row trigger to update an "updated_by" column on your table to be USER.
e.g.:
:new.updated_by := USER;

How to format date/time in display hints?

To those of you who know it:
One of the attributes in a VO is of Date type. To display of the date in the format of "10/25/2009 11:45 PM", I only managed to display "10/25/2009 11:45" with only the clue of the few examples provided in display hints when doing the formatting (the format mask I use is MM/dd/yyyy hh:mm). I would appreciate it if someone could advise how to display the AM/PM part of the format mask. Or better yet, point me to a source of reference for such formattnig.
Thanks!
Newman

Newman,
As suggested by Puthanampatti, you have to use 'a' in the date pattern to display AM/PM.
You can find date and time patterns in [SimpleDateFormat API doc|http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html] which describes more about the letters to be used for each pattern which you can also use with attribute display hints in VO.
Sireesha

How to Format Date / Time

I found out how to retrieve date and time from the operating system, but how do i format it.
I need the short and sweet versions.
Example:
// Retrieving from the operating system.....
String system_date = new java.util.Date().toString();
Now I want to parse the date string... for instance retriving the current date in this format (DD-MON-YYYY)....
if u know another way to retrieve the date without parsing the string so I can just pull the year instead of everything....
Thank You In Advance

Try out this code:
//TO GET THE YEAR AS A NUMBER, USE DE java.util.Calendar class
Calendar rightNow = Calendar.getInstance();
System.out.println("My age is " + (rightNow.get(Calendar.YEAR) - 1971));
//TO FORMAT A DATE IN YOUR LOCALE USE, java.text.DateFormat
DateFormat df = DateFormat.getInstance();
System.out.println("The date right now is " + df.format(new Date()));
//TO FORMAT A DATE IN ANOTHER FORMAT AND LOCALE...
DateFormat df2 = DateFormat.getDateInstance(DateFormat.SHORT, Locale.CHINA);
System.out.println("The date right now in China is " + df2.format(new Date()));
I hope this soves your problem,

SSRS 2005 - How to do a WHERE clause against grouped items?

Hi all
Sorry for a newbie question, but I have been trying to solve this issue for ages and have not come up with anything yet!
I have the following example data:
SiteID    Contract
0001      No
0002      No
0002      Yes
0003      Yes
0004      Yes
0004      No
I want to return the following:
SiteID    Contract
0001      No
0002      Yes
0003      Yes
0004      Yes
What I am trying to do is Group by SiteID, and if a SiteID has multiple rows, to only return the row with Yes in the Contract column
Can someone please help me with this?
Many thanks
Naz

you can also do this in query behind and do direct pull to report
use query like this
SELECT SiteID,Contract
FROM
SELECT ROW_NUMBER() OVER (PARTITON BY SiteID ORDER BY Contract DESC) AS SEq,*
FROM Table)t
WHERE Seq = 1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

WPF: How to make the first column does not show row separator and Left column separator in DataGrid?

Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneC

Hi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC

How to format 9 or 11 digit number with dashes

Windows Adobe Pro 9.
Someone please be kind and have mercy on me, I've researched this issue for 5 hours now and cannot resolve it on my own.
I have a text field where the user will enter either a 9 digit or 11 digit number separated with dashes. If the number entered is 9 digits, it should appear as
XX-XXXXXXX. If 11 digits, it should appear as XX-XXXXXXX-XX. If only 9 digits are entered, the -XX at the end must be omitted.
I found a javascript that showed how to allow a varying number of digits, and I also found one that showed how to cause the dash to be entered, but I'm not smart enough to know how to combine the two. I've only used one other javascript before (how to format the time 12:00 am, with a gigantic thanks to Mr. George Johnson), so I know that I must put the script in "Advanced > Document Processing > Document JavaScripts." I think then I would go into the text field format and select "custom," and enter a keystroke and format script???
Any help will be greatly appreciated.
thanks
alice

Hi Mr. Johnson,
When I copied the first part of the code into the document-level javascript editor box and hit okay, it gives this message:
SyntaxError: return not in function
8: at line 9
and the cursor moves to the empty line after:
// Do nothing if field is blank
if (!s) return;
Is there something missing?
I really appreciate your help.
alice

How to format "My Passport" for Time Machine

I have purchased a 1TB Western Digital My Passport Drive (an external drive connected via USB). How should I format this drive to use it with Time Machine?
I'm running OSX 10.6.8 on an Intel iMac (hardware circa 2005). I have been using Time Machine for several years, rotating through external disks. Thie new disk will replace one of the previous disks which has failed. I have forgotten how I formatted the previous disks. I'm primarily interested in whther to use HFS or whatnot. As to partitioning, the format will just be one partition for the whole disk.
I'm going to see if I can figure this out using Disk Utility, but in the mean time, does anyone have recommendations?
Thanks in advance,
Frank

Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select the WD Passport drive (entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

How to combine date column and time column?

Hello all,
The question is pretty much as it says. I have two columns of data, one is in format 8/28/2014 and the other is in format 10:00 PM. Both are formatted as text because I got frustrated with numbers forcing me to only format things as Date AND Time. I want to be able to sort the list in chronological order, and I can't sub-sort columns. So, how can I combine them into one date+time column so that I can sort?
Thanks!
-acousticguitar7

AG,
If your Date is in A and your Time is in B, the formula to combine them would be:
=A+TIMEVALUE(B)
Jerry

How to format an external drive used for time machine

My 150 Gig external hard drive showed too full for a time machine backup. It only showed 20 gig left. So I moved the time machine backup on it to the trash to make room for a new one. This did nothing. With the files in the trash the drive still shows full even though it has no time machine backup on it.
So I would like to know how I can format this drive again to get it to accept a brand new time machine backup. Or how do I get time machine to recognize the drive as empty instead of full.
I now know I should have at least a 500 gig drive to let time machine make it's plethora of backups. But the 150 gig drive is what I have right now to backup an 80 gig hard drive and I would like to start from scratch.
Thanks,
JJ Bula

With the files in the trash the drive still shows full
You need to empty the Trash before anything is actually removed from the drive.
If you want to completely erase the drive, launch Disk Utility, select the drive, go to the Erase pane and click "Erase".

SSRS 2005 - How to format a time column so it shows as HH:MM?

Similar Messages

Maybe you are looking for