SSRS 2005 report: Cannot bulk load Operating system error code 5(Access is denied.)

I built a SSRS 2005 report, which calls a stored proc on SQL Server 2005. The proc contains following code:
CREATE TABLE #promo (promo VARCHAR(1000))
BULK
INSERT #promo
FROM '\\aseposretail\c$\nz\promo_names.txt'
WITH
--FIELDTERMINATOR = '',
ROWTERMINATOR = '\n'
SELECT * from #promo
It's ok when I manually execute the proc in SSMS.
When I try to run the report from BIDS I got following error:
*Cannot bulk load because the file "\aseposretail\c$\nz\promo_names.txt" could not be opened. Operating system error code 5(Access is denied.).*
Note: I have gooled a bit and see many questions on this but they are not relevant because I CAN run the code no problem in SSMS. It's the SSRS having the issue. I know little about the security of SSRS.

I'm having the same type of issue.  I can bulk load the same file into the same table on the same server using the same login on one workstation, but not on another.  I get this error:
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\\xxx\abc.txt" could not be opened. Operating system error code 5(Access is denied.).
I've checked SQL client versions and they are the same, I've also set the client connection to TCP/IP only in the SQL Server Configuration Manager.  Still this one workstation is getting the error.  Since the same login is being used on both workstations and it works on one  but not the other, the issue is not a permissions issue.  I can also have another user login into the bad workstation and have the bulk load fail, but when they log into their regular workstation it works fine.  Any ideas on what the client configuration issue is?  These are the version numbers for Management Studio:
Microsoft SQL Server Management Studio 9.00.3042.00
Microsoft Analysis Services Client Tools 2005.090.3042.00
Microsoft Data Access Components (MDAC) 2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML 2.6 3.0 5.0 6.0
Microsoft Internet Explorer 6.0.2900.5512
Microsoft .NET Framework 2.0.50727.1433
Operating System 5.1.2600
Thanks,
MWise

Similar Messages

  • SSIS BULK INSERT unsing UNC inside of ForEach Loop Container Failed could not be opened. Operating system error code 5(Access is denied.)

    Hi,
    I am trying to figure out how to fix my problem
    Error: Could not be opened. Operating system error code 5(Access is denied.)
    Process Description:
    Target Database Server Reside on different Server in the Network
    SSIS Package runs from a Remote Server
    SSIS Package use a ForEachLoop Container to loop into a directory to do Bulk Insert
    SSIS Package use variables to specified the share location of the files using UNC like this
    \\server\files
    Database Service accounts under the Database is runing it has full permission on the share drive were the files reside.
    In the Execution Results tab shows the prepare SQL statement for the BULK insert and I can run the same exact the bulk insert in SSMS without errors, from the Database Server and from the server were SSIS package is executed.
    I am on a dead end and I don’t want to re-write SSIS to use Data Flow Task because is not flexible to update when metadata of the table changed.
    Below post it has almost the same situation:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/8de13e74-709a-43a5-8be2-034b764ca44f/problem-with-bulk-insert-task-in-foreach-loop?forum=sqlintegrationservices

    Insteresting how I fixed the issue, Adding the Application Name into the SQL OLAP Connection String Fixed the issue. I am not sure why SQL Server wasn't able to open the file remotely without this.

  • What does this mean? Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.

    This is the error that we get when we run the Tag File.
    ERROR 04/16/2004 02:26:15 PM Server ERROR from Server: National Instruments.OPCLookoutDrivers. Status: -196608, Server Message: Unable to load server - system error code: 0x80080005, CO_E_SERVER_EXEC_FAILURE: Server execution failed.
    What does it all mean?

    ACRE,
    this looks like the Industrial Automation OPC Server (Lookout OPC) is not correctly installed or configured and therefore the DSC Tag Engine - as OPC client - cannot launch the OPC server correctly.
    Two checks I have in mind.
    - Installation check: Check if the Industrial Automation Server is installed and configured correctly and that you will have a .lpd file as default. Could it be that the .lpd file is corrupted? BTW - what kind of protocol are you using and did you configure aliases for the LPD object? A good resource on checking the configuration might be the online help of Industrial Automation Server (Lookout Protocol Drivers) or the link penDocument>How Do I Configure My Devices with Lookout Protocol Drivers?
    - Access rights, COM/DCOM problems: Can you launch the OPC Server with another OPC client? Is your OPC server running locally? If you don't know how to check on this I found a good KB Tools for Troubleshooting OPC Interface Problems E.g. can you access it with Server Explorer?
    Last question... did you encounter this problem recently while it was working before? What changes have been done on your system?
    Let us know if you have some questions and I hope some of the links help you further troubleshooting this issue.
    Roland

  • When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA

    You can try downloading the 64 bit version.  You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • Cannot (Re)Load Operating System - OptiPlex 755

    I have an OptiPlex 755 that was wiped clean.  When I boot the computer I get the warning the System Battery Voltage is low..  After I press F1 to continue I get the message "Error Loading Operating System".
    I tried again this time selecting F5 to run onboard diagnostics and nothing happens.
    Any help will be appreciated.

    Optical drives like Floppy drives are on their way out.
    F12 booting a USB Flash device is the way things will become in the future.  You can even install Ubuntu alongside windows to dual boot.
    It resizes your NTFS partition and installs UBuntu in its own EFS partition.  When you reboot you can choose Linux or XP.  That way you dont lose any data files.
    http://www.pendrivelinux.com/
    http://www.ebay.com/sch/i.html?_nkw=ubuntu%20usb%20drive

  • Boot Camp "Error loading operating system" error

    When I try to boot into Windows XP via boot camp I get "Error loading operating system"
    The partition still works fine with VMWare.
    Any suggestions?

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
    Boot Camp: Installation and Storage

  • Bulk Insert Task Cannot bulk load because the file could not be opened.operating system error error code 3(The system cannot find the path specified.)

    Following error i am getting after i chnaged the Path in Config File from
    \\vs01\d$\\Deployment\Files\temp.txt
    to
    C:\Deployment\Files\temp.txt
    [Bulk Insert Task] Error: An error occurred with the following error message: "Cannot bulk load because the file "C:\Deployment\Files\temp.txt" could not be opened. Operating system error code 3(The system cannot find the path specified.).". 

    I think i know whats going on. The Bulk Insert task runs by executing sql command (bulk insert) internally from the target sql server to load the file. This means that the SQL Server Agent of the target sql server should have permissions on the file you trying to load. This also means that you need to use UNC path instead to specify the file path (if the target server in on different machine)
    Also from BOL (see section Usage Considerations - last bullet point)
    http://msdn.microsoft.com/en-us/library/ms141239.aspx
    * Only members of the sysadmin fixed server role can run a package that contains a Bulk Insert task.
    Make sure you take care of this as well.
    HTH
    ~Mukti
    Mukti

  • "Error loading operating system" in windows 7 bootcamp

    Hello, Im trying to boot up my windows 7 and its giving me "Error loading operating system". But the wierd thing is from Mac OS X i can access my bootcamp without any problem "browsing it", all my music is on it actually. Any solutions guys?

    Hi guys,
    Sorry to resurrect an old thread, but I am suddenly having a very similar problem and maybe one of you can help me.  I have searched the problem using many different phrases but have not found a solution to my specific issue anywhere so I turned here.
    Problem : I am getting the "Error Loading Operating System" error on the windows side after trying to boot up using BootCamp.
    More Info / History :  Everything was running fine until I updated OSX to 10.10.02.  I have an unsupported card with no EFI : GTX 980 so I couldn't tell what was going on with the update but it just hung in black screen for a while and then when into an infinite restart-loop.  Sooooo, I pulled the card and put my old GTX 120 with EFI back in to see what the **** was going on and miraculously it decided to finish the update.  (Maybe it had something to do with the unsupported card? IDK)  The update finished successfully after i swapped out the cards but I fear i screwed up something by restarting during the update (I was hung up, I waited a very long time before hitting the power button).  OSX is running ok, I put the other card back in and it is working ok now, but...  BootCamp was working...  once.  Then I restarted and it wouldn't work, I got the error message.  So I tried doing a verify/repair disk on both drives, OSX and W7, and that didn't do anything, so I tried to start BootCamp assistant and I couldn't...  So I reset the PRAM and that fixed the problem with BootCamp Assistant, so now that starts up, but I don't know if I can repair the issue with it?  However I still can't boot into Windows.  Again, when I hold down option on boot, I do get the menu (BootCamp?) to choose which OS to go into.  Side Note, when I pick Recovery Mode from that menu, I get the mac error message and it restarts.
    All the W7 Files are still present on the drive...  Is there any way I can back up the image, re-prep the drive for BootCamp and re-image it to repair it?  All thoughts, suggestions, etc. welcome.
    Hardware:
    • Upgraded 2009 Hex-Core Mac Pro flashed to 2010
    • OWC PCIE SSD - OSX 10.2.2 installed here
    • nVidia GTX 980 - EVGA
    • 1TB HDD - 1 Partition - Windows 7 installed here (Bootcamp)

  • W.I.C.S Nationwide Error Connecting - Specified driver could not be loaded due system error 998

    I am currently virtualising W.I.C.S Nationwide with APP V 5.0 SP1 on a Windows 64BIT machine. When I install and launch the application manually I am able to log into the application successfully without issues.
    When I sequence the application, I get nothing in the report to suggest any issues. in fact the report has nothing. After sequencing, when testing the application on a client machine (Which is a mirror copy of the sequencing machine), once I put in the log
    in credentials and try to connect with the application, I get the below error message:
    Error Connecting - 2147467259 :Specified driver could not be loaded due system error 998:Invalid access to memory location. (Oracle in Installclient11_1,C:\ProgramData\App-V\86B33AE4-890E-4E98-AD4F-C4F7A1FCA0DE\4D075A01-3775-4BEA-BEC4-5414B3B0D02E\Root\instantclient_11_1\sqora32.dll).
    I was wondering if anyone has had this issue with a similar application that tries to load an ODBC driver and if so how did you resolve it
    UObi

    When Sequencing did you try to go into ODBC and test the connection?  Is that file in that location? If you run a ProcMon, what results does that produce in relation to the sqora32.dll?
    Out of interest, have you tried sequencing on a 32-bit machine? I haven't had an issue yet but am wondering if it's a 32-bit driver running on 64-bit and not running correctly for some reason, either way, a ProcMon may give you some clues. Sorry, can't be
    much help
    PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
    rorymon.com Twitter: @Rorymon

  • SUM problem in SSRS 2005 report

    I don't know how best to explain this but will try.
    In my SSRS 2005 report, i have one group in my table.  In that group, I have a field that for each company record in my dataset, this field value is repeated for each record. This is a transactions table so you'd expect several records in the dataset for each company..that's not the problem.
    example data from dataset:
    TransID     CompanyID      FeeGoal
    1                1000                  100
    2                1000                  100
    3                1000                  100
    4                2000                   400
    5                2000                   400
    My SSRS 2005 Report has:
    Group1 fields:
    CompanyID                                       FeeGoal
    =Fields!CustomerNumber.Value        =Fields!FeeGoal.Value
    The output when previewed looks like this:
    Company   FeeGoal
    1000               100
    2000               400
    Footer            209409730.83 (totals up all feegoals!  not just unique instances!)
    I have a footer, and this is where the problem comes in.  I am not able to sum 100 + 400 because if I do a SUM(=Fields!FeeGoal.Value) It doesn't just sume up 100 + 400 but rather (100 + 100 + 100) + (400 + 400)
    I can't find a way to sum up basically the top values for FeeGoal which is really what the Group Field is doing since I get 100 and 400 in my group field for feeGoal.  I should end up with a total of 500 for my footer total for Fee Goal but not sure how to get this to work in this unique situation.
    FYI: FeeGoal is an input from an ASP.NET form to allow managers to update that one column in my report so that other calculations can rely on it in my group fields.  Once the user finishes, I run a stored proc to insert that fee goal in every customer transaction record / feegoal field
    I guess is there a way to do some sort of Distinct SUM in an expression? I also tried:
    =SUM((Max(Fields!FeeGoal_AZ.Value)) / Fields!FeeSchedule.Value) * 100)
    but you can't have an aggregate function like this, I get this error:
    [rsAggregateofAggregate] The Value expression for the textbox 'GrossGoal_gt' contains an aggregate function (or RunningValue or RowNumber functions) in the argument to another aggregate function (or RunningValue). Aggregate functions cannot be nested inside other aggregate functions.
    Build complete -- 1 errors, 0 warnings
     

    Hi,
    I need to generate a SSRS 2005 report like bellow:
    OrderNumber    MultiInvoice    SalesAmt        
    TaxAmt          TotalAmt
    301256              1                     
    302                   20                  322
    369856                                    
     501                   10                  511
    359826                                    
    456                    1                    457
    785412              2                    
    725                    25                  750
    totalRow=4      totalRow=2      Sum=1984        Sum=56          
    Sum=2040 ----------------------->Footer
    --I added textbox in ther footer of that report table, and try to add expression for each, like
    1>OrderNumber : =CountRows()
    2>MultiInvoice :  =Count(column name) //but it is return no of rows,
    where it should be only 2.
    How can do that?
    3>SalesAmt : =
    SUM(Fields!SalesAmt.Value)   //It is not returning actual summation of all rows for
    SalesAmt
     column. How can I do that?
    Dipen Bhadra

  • SubReports Issues in SSRS 2005 Reports Upgrade to 2012

    Hi there!
    We are planning to upgrade our SSRS 2005 reports to SSRS 2012. As I heard there will are some upgrade compatibility issues, I read the below MSDN article and found that the Reports that include subreports may fail in upgrade. Below
    is the article.
    Upgrading a Report with Subreports:
    When a report contains subreports,
    one of four possible states can occur during upgrade:
    The main report and all subreports can be successfully upgraded. They are processed by the SQL Server 2012 Reporting Services (SSRS) report processor.
    The main report and all subreports cannot be upgraded. They are processed by the SQL Server 2005 Reporting Services report processor.
    The main report can be upgraded but one or more subreports cannot be upgraded. The main report is processed by the SQL Server 2012 Reporting Services (SSRS) report processor, but the rendered report shows the message "Error: Subreport
    could not be processed" in the location where the subreport that could not be upgraded would appear.
    The main report cannot be upgraded but one or more subreports can be upgraded. The main report is processed by the SQL Server 2012 Reporting Services (SSRS) report processor, but the rendered report shows the message "Error: Subreport
    could not be processed" in the location where the subreport would appear.
    If you see the error "Error: Subreport could not be processed",
    you must change the definition of the main report or the subreport so that the reports can be processed by the same version of the report processor.
    Can some one please tell me what does the above line mean? What does it mean by the phrase
    change the definition of main report? Does it mean I need to set any property in the main report?
    Please help! Thanks in advance.
    Ammy

    Hi Ammy,
    When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace. This is the only way
    you can upgrade a report definition file. A report with subreports must be processed by the same version of the Reporting Services report processor. When upgrading reports to the current version of the report definition schema, the main report and the subreports
    may or may not be updated at the same time. If the version is not compatible between a report and its subreports, the following message is displayed: "Subreport could not be processed."
    If we want to change the definition of the report, we can open an .rdl file in Report Designer in SQL Server Data Tools (SSDT).  Then the namespace of the report will upgrade to the current namespace. For more information about Identify the Report Schema
    Version, please see the following document:
    http://msdn.microsoft.com/en-us/library/cc627465(v=sql.110).aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Error loading operating system (windows 7)

    Macbook pro 8,2 (early 2011)
    Samsung SSD 850 evo primary drive
    OWC electra 3G secondary drive in place of the original DVD drive (with disk doubler).
    My original HDD was removed for the two SSD configuration.
    It contains two partition (OS X and Win 7 pro) and everything works fine.
    I use Winclone to clone Win 7 partition to the new OWC drive.
    My OS X partition was placed on the primary Samsung drive.
    OS X works fine.
    Win 7 works fine when i use Parallels Desktop (virtualization).
    But when i try to boot with Win 7, i have the " error loading operating system" black screen.
    I cannot repair Win 7 with the installation disc because when i try to boot with the DVD, i have à black screen with a white cursor and nothing happend. (original DVD drive is used in usb, inside a dedicated external cradle).
    Here are some of terminal commands :
    Last login: Sat Feb 14 17:26:06 on console
    MacBook-Pro-de-Guillaume:~ Home$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Mac                     499.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *120.0 GB   disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:       Microsoft Basic Data Windows 7               119.8 GB   disk1s2
    MacBook-Pro-de-Guillaume:~ Home$ sudo gpt -vv -r show /dev/disk1
    Password:
    gpt show: /dev/disk1: mediasize=120034123776; sectorsize=512; blocks=234441648
    gpt show: /dev/disk1: PMBR at sector 0
    gpt show: /dev/disk1: Pri GPT at sector 1
    gpt show: /dev/disk1: Sec GPT at sector 234441647
          start       size  index  contents
              0          1         PMBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640       2008        
         411648  234029056      2  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      234440704        911        
      234441615         32         Sec GPT table
      234441647          1         Sec GPT header
    MacBook-Pro-de-Guillaume:~ Home$ sudo fdisk /dev/disk1
    Disk: /dev/disk1 geometry: 14593/255/63 [234441648 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -  234441647] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    MacBook-Pro-de-Guillaume:~ Home$ sudo gpt -vv -r show /dev/disk1
    gpt show: /dev/disk1: mediasize=120034123776; sectorsize=512; blocks=234441648
    gpt show: /dev/disk1: PMBR at sector 0
    gpt show: /dev/disk1: Pri GPT at sector 1
    gpt show: /dev/disk1: Sec GPT at sector 234441647
          start       size  index  contents
              0          1         PMBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640       2008        
         411648  234029056      2  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      234440704        911        
      234441615         32         Sec GPT table
      234441647          1         Sec GPT header
    MacBook-Pro-de-Guillaume:~ Home$
    Thank you for your help !

    You are creating a new protective MBR, not a Hybrid MBR. A protective MBR encapsulates the disk into a single entry the size of the disk so legacy partitioning tools leave it untouched to 'protect' the GPT.
    In your case, since disk1 has only two partitions, GPT1 and GPT2, you should have two entries.
    Here is an example, where GPT3, 4 and 5 are hybridized.
    Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR.
    Use defaults for other questions (for example Enter an MBR hex code (default AF): AF).
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 3 4 5
    Y (Good for GRUB question)
    N (part 3 boot flag)
    N (part 4 boot flag)
    Y  (part 5 boot flag make NTFS bootable partition)
    P  (Print list of parts again)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    Please ensure that the following questions get appropriate defaults or correct values for the MBR hex codes as suggested by Gdisk. These are examples using a standard, your partition numbers will have a differential of 1. Given the prior Gdisk steps, your mapping will look as follows
    GPT1+2 (EFI+OSX) = MBR1 (You lose read visibility to OSX from Windows).
    GPT3 = MBR2 (Recovery HD).
    GPT4 (Shareddisk) = MBR3 (Shareddisk)
    GPT5 (Bootcamp) = MBR4 (Bootcamp - This should be made bootable).
    You can create variants of which partitions get mapped to which MBR). If you use 2 4 5, then Recovery will look like Free Disk space to Windows and can be corrupted. If you use 4 5, then EFI+OSX+Recovery HD will end up in MBR1. Try and see which works the best for you. In this configuration, I would also recommend not using any third-party NTFS tools.
    The following is an example for 2 3 4
    Creating entry for GPT partition #2 (MBR partition #2)
    Enter an MBR hex code (default AF): AF
    Set the bootable flag? (Y/N): n
    Creating entry for GPT partition #3 (MBR partition #3)
    Enter an MBR hex code (default AB): AB
    Set the bootable flag? (Y/N): n
    Creating entry for GPT partition #4 (MBR partition #4)
    Enter an MBR hex code (default 07): 07
    Set the bootable flag? (Y/N): y
    In your case the steps will become...
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 2
    Y (Good for GRUB question)
    Y  (part 2 boot flag make NTFS bootable partition)
    P  (Print list of parts again)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    After the reboot, check the output of sudo fdisk /dev/disk0.

  • "DD8x". Error message for loading process:Operating system error !

    Using the OLE command I receive the following error:
    Cannot load the file "File Name" with the loading process "DD8x". Error message for loading process:
    Operating system error <> !
    strCommand ="DATAFILEIMPORT('J:\ctf\GM\040119-2\dat7.dat','',0)"
    lsuccess = IDIACommand.CmdExecuteSync(strCommand)
    I get the same error with the "DataLoadHdFile" command.
    After the error happens, I cannot load any files in the directory until I
    reboot DIAdem.

    Hi punkmonkey,
    I'm curious why you compare the results of the "DataLoadHdFile" command with that of the "DataFileImport" command. The former is a time-honored DAT-file-specific command for only reading the header file contents-- NOT the data, and the latter is a brand new DIAdem 9.0 function for loading all sorts of data files-- TDM files included.
    If you want to load a DAT file using an OLE command, why don't you try the time-honored "DataLoad" command, which is specifically designed for loading DAT files? The "DataLoadHdFile" command is really only used to do selective loading (specific channels or rows) of part of a DAT file. Do you want to load selectively, or do you want to load all the channels from the DAT file?
    When you get the same error with
    the "DataLoadHdFile" command, are you executing that command also through OLE automation, or directly in DIAdem? What happens if you try both the "DataLoadHdFile" and the "DataFileImport" commands directly from DIAdem (no OLE)?
    Brad Turpin
    DIAdem Product Support Engineer
    National Instruments

  • Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.).

    SQL 2005 Enterprise
    Even if I logon as Administrator and try to backup any of my databases to local partitions, I get this error below. I have been operating fine up until this point and doing backups all the time.  As far as I know, and after checking, no permissions have changed and of course Administrator has ntfs permissions to my local C and other partitions on this server:
    TITLE: Microsoft SQL Server Management Studio
    Backup failed for Server 'servername'.  (Microsoft.SqlServer.Smo)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Backup+Server&LinkId=20476
    ADDITIONAL INFORMATION:
    System.Data.SqlClient.SqlError: Cannot open backup device 'F:\foldername'. Operating system error 5(Access is denied.). (Microsoft.SqlServer.Smo)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.1399.00&LinkId=20476
    BUTTONS:
    OK
    In the Event log for Windows Server 2003 I see this:
    Event Type: Error
    Event Source: DCOM
    Event Category: None
    Event ID: 10016
    Date:  3/6/2006
    Time:  3:35:06 PM
    User:  NT AUTHORITY\NETWORK SERVICE
    Computer: servername
    Description:
    The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
    {BA126AD1-2166-11D1-B1D0-00805FC1270E}
     to the user NT AUTHORITY\NETWORK SERVICE SID (S-1-5-20).  This security permission can be modified using the Component Services administrative tool.
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    SQL Service account is DOMAIN\SQLAdmin
    Have given the SQLAdmin AD account access to the Backup shares on the file servers (2 file servers, FILE1, FILE2)
    and I still get the error
    Operating system error 5(Access is denied.).
    RESTORE FILELISTONLY
    FROM DISK = N'\\SERVER\APPS\backups\UA\DB\DB.BAK'
    I trid to attach it as device, which runs
    sp_addumpdevice 'disk', 'Network_Share', '\\SERVER\backup\APPS\UA\DB\DB.BAK'
    BUT when restoring, same error occurred (Access denied)
    Only case I can backup/restore to/from network shares, is from the machines where SQL Server runs (SQL1, SQL2)
    e.g. I copy the BAK file from FILE1 to SQL2, share the folder (add SQLAdmin account with access), then restore on SQL1 with file from SQL2 Share
    RESTORE FILELISTONLY
    FROM DISK = N'\\SQL2\backups\UA\DB\DB.BAK'

  • Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    hi,
    am running the below command for moving sql serevr mdf and ldf files  from one  drive to another : c  drive to d drive:
    but am getting the below error
    SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\abc.mdf". Operating system error 2: "2(The system cannot find the file specified.)".
    use master
    DECLARE @DBName nvarchar(50)
    SET @DBName = 'CMP_143'
    DECLARE @RC int
    EXEC @RC = sp_detach_db @DBName
    DECLARE @NewPath nvarchar(1000)
    --SET @NewPath = 'E:\Data\Microsoft SQL Server\Data\';
    SET @NewPath = 'D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\';
    DECLARE @OldPath nvarchar(1000)
    SET @OldPath = 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\';
    DECLARE @DBFileName nvarchar(100)
    SET @DBFileName = @DBName + '.mdf';
    DECLARE @LogFileName nvarchar(100)
    SET @LogFileName = @DBName + '_log.ldf';
    DECLARE @SRCData nvarchar(1000)
    SET @SRCData = @OldPath + @DBFileName;
    DECLARE @SRCLog nvarchar(1000)
    SET @SRCLog = @OldPath + @LogFileName;
    DECLARE @DESTData nvarchar(1000)
    SET @DESTData = @NewPath + @DBFileName;
    DECLARE @DESTLog nvarchar(1000)
    SET @DESTLog = @NewPath + @LogFileName;
    DECLARE @FILEPATH nvarchar(1000);
    DECLARE @LOGPATH nvarchar(1000);
    SET @FILEPATH = N'xcopy /Y "' + @SRCData + N'" "' + @NewPath + '"';
    SET @LOGPATH = N'xcopy /Y "' + @SRCLog + N'" "' + @NewPath + '"';
    exec xp_cmdshell @FILEPATH;
    exec xp_cmdshell @LOGPATH;
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    go
    can anyone pls help how to set the db offline. currently  i  stopped the sql server services from services.msc and started the  sql server agent.
    should i stop both services for moving from one drive to another?
    note: I tried teh below solution but this didint work:
    ALTER DATABASE <DBName> SET OFFLINE WITH ROLLBACK IMMEDIATE
    Update:
    now am getting the message :
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    (3 row(s) affected)
    (3 row(s) affected)
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)".

    First you should have checked the database mdf/ldf name and location by using the command
    Use CMP_143
    Go
    Sp_helpfile
    Looks like your database CMP_143 was successfully detached but mdf/ldf location or name was different that is why it did not get copied to target location.
    Database is already detached that’s why db offline failed
    Msg 15010, Level 16, State 1, Procedure sp_detach_db, Line 40
    The database 'CMP_143' does not exist. Supply a valid database name. To see available databases, use sys.databases.
    EXEC @RC = sp_attach_db @DBName, @DESTData, @DESTLog
    Attached step is failing as there is no mdf file
    Msg 5120, Level 16, State 101, Line 1
    Unable to open the physical file "D:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\CMP_143.mdf". Operating system error 2: "2(The system cannot find the file specified.)"
    Solution:
    Search for the physical files(mdf/ldf) in the OS and copy to target location and the re-run sp_attach_db with right location and name of mdf/ldf.

Maybe you are looking for

  • "There was a problem connecting to the server" in iTunes after migrating to new mac

    I have a problem that is driving me crazy with my brand new iMac. I see many other people posting similar issues, but none of the other solutions seem to work for me. I had a MacPro and bought a new iMac, on which I used Migration Assistant to set up

  • Smart Playlists not working correctly

    Is anyone else able to reproduce this fault? I have added a smart playlist simply called music... with the options set as follows: Match (checked) ANY of the following rules... Genre is not Podcast Genre is not Lecture Live Updating is also checked..

  • No playback of older songs

    hi I just picked up logic 7.1 pro and its been a month so far I have been with it. learning as much as I can. recently I was given an older (logic 4.5) song to open in my logic 7.1 to mix but when I load the song , Logic tells me that it has converte

  • I'm experiencing problems to share files

    Hi all I've reformat my desktop following tones of bugs. Before everything with the router was working fine the desktop is the main pc connected to the router I can access the net the laptop is wireless and it's working as well everything is protecte

  • Annoying HDD noise

    Hey guys, I got my T500 about a month ago and love it bar the HDD (the 160gb version). It makes the usual sounds that a HDD makes but it also makes a constant quiet background beeping/whining sound...sounds like beeeeep or dedeeeeee (if that makes se