SSRS 2008 - How to chnage the display axis title?

Hi all,
I have a bubble chart. Currently the values shown on y axis are 1,2,3 and 4. Since it is mandatory to have a numeric value on y axis so i want to change the axis title just for display. I want to change the axis title to some string value
just for display. How can i do that ?
Alok Aswal
Thanks in advance :)

Hi Alok,
Based on my research, if we directly add the expression Fields!field_name.Value or other string values in the Custom Number format property, the axis will all display the first value of the field. So we cannot directly achieve the goal. But if there are
only three values on the Y Axis, we can use
excel format code as Peter suggested.
If there are more than three values on the Y Axis, we can use a table control to simulate the Axis labels to work around this issue. For more details, please refer to the steps below:
Drag a table to design surface, then delete the table header and last two columns.
Insert the expression which have some string values as below to the cell:
=Fields!field_name.Value
Set HideLabels property of Y Axis to True, then adjust the table position so that it aligns to the Y Axis of chart.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

I have three email accounts and want to know how to change the display order.

I have three email accounts and want to know how to change the display order.

Install this add on.
https://addons.mozilla.org/en-US/thunderbird/addon/manually-sort-folders/?src=search

How to restrict the display of report variants

Hello All,
I want t know how to restrict the display of report variants.
I mean, when a user saves a variant for his/her purpuse on some report program, only he/she can refer the variant while other users cannot.
I know that by setting the attribute of the variant ("Protect Variant ", "Only Display in Catalog"), this would be possible, but I want to know another way, without this setting.
Thank you for your help in advance.
Regards,

Hi,
Can you just try this
DATA:it_varid TYPE TABLE OF varid.
DATA:wa_varid TYPE varid.
INITIALIZATION.
SELECT * FROM varid INTO TABLE it_varid
      WHERE report = sy-repid
      and ename = sy-uname.
IF sy-subrc = 0.
    LOOP AT it_varid INTO wa_varid .
      CALL FUNCTION 'RS_SUPPORT_SELECTIONS'
        EXPORTING
          report               = sy-repid
          variant              = wa_varid-variant
        EXCEPTIONS
          variant_not_existent = 1
          variant_obsolete     = 2
          OTHERS               = 3.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDLOOP.
ENDIF.

How to change the display of a spectrogram (background color)

how to change the display of a spectrogram (background color).
I am using JFTA Adaptive spectrogram. Need to change the color of the background.

: how to change the display of a spectrogram (background color)
Attachments:
snap.docx ‏23 KB

How to chage the display name in SC browser for the custome fields?

Hi,
I created 2 custom fields for Shopping cart in SRM. How to chage the display name in SC browser for this custome fields?
Thanks
Kevin

Hi Kevin,
when you have defined your customer fields, you have created new fields in the CUF structures. The labels displayed on the SC screen come from the data element you have assigned to those cust fields in the include structure.
If you have used a std data element, then you can change its translation (attention, this will impact all structures, tables... abap objects using this data element).
If you have created a Z data element, then adapt its description accordingly.
Rgds
Christophe
PS: please reward points for helpfull answers

How to change the Display Pattern for Decimal Fields dynamically

hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
Prabhu

Hi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.

The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
Thanks, Sara

It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

How to use the DISPLAY RECORD Setup Command in an etext file?

Hi All,
How to use the DISPLAY RECORD Setup Command in an etext file?
I want to display a <NEW RECORD> conditionally. The condition will be based on the data coming through from the xml file.
Please help me with an example. The BI User guide also doesnt show any examples.
Your help is appreciated.
Rgds,
Kiran Panditi

Hi,
You can use vb coding in BEx Analyser to calculate your unit price. For this you have to first display the attributes of your object "XYZ". Then you can use VB cosing to calculate the value for the unit price field.
One more thing cna you clarify whether is it display attribute or variable ?
Regards,
Balajee

How to find the Display Template associated with a JSP ?

Hi All,
We have a requirement to alter the text on few buttons and headers for a Published Site. I have modified the Seeded JSP and saved as xxseeded.jsp and deployed in $OA_HTML. Now i want to add this custom JSP to the Display Template but i don't know how to find the Display Template Associated with the Seeded JSP. So, i need to know the Programmatic access name for the Display Template which uses this Seeded JSP as Source file. Is there any where i can check?
Thank you

Hi,
Use the below queries
Use the below query to get the Template name for the associated JSP file.
SELECT I.ACCESS_NAME, A.FILE_NAME FROM JTF.JTF_AMV_ATTACHMENTS A, APPS.JTF_AMV_ITEMS_VL I, IBE.IBE_DSP_LGL_PHYS_MAP M, IBE.IBE_MSITES_TL S WHERE A.ATTACHMENT_ID = M.ATTACHMENT_ID AND I.ITEM_ID = M.ITEM_ID AND M.MSITE_ID = S.MSITE_ID and a.FILE_NAME like 'Jsp file name here'
Same query can be little modified to get the File name from the Template name.
SELECT I.ACCESS_NAME, A.FILE_NAME FROM JTF.JTF_AMV_ATTACHMENTS A, APPS.JTF_AMV_ITEMS_VL I, IBE.IBE_DSP_LGL_PHYS_MAP M, IBE.IBE_MSITES_TL S
WHERE A.ATTACHMENT_ID = M.ATTACHMENT_ID AND I.ITEM_ID = M.ITEM_ID AND M.MSITE_ID = S.MSITE_ID and I.ACCESS_NAME like ‘template name here’
Thanks
Pradeep
Edited by: Pradeep Kalyan on Feb 9, 2012 9:40 PM

How much does the display move ?

This is a stupid question but how much can the display be moved ? All the pictures that I see it appears that the display is at an angle. Can the display angled down ( like if I put it on a cabinet ) ?

I can't find the actual numbers, but the display tilts I think about 10 or 15 degrees back from vertical, and a little less than that forward from vertical. At least mine is that way... the new ones may be a little different. I got mine last May.

How to recover the display of MacBook Pro

how to recover the display of MacBook Pro

Recover the display?
Not sure what you mean. More details please.

How to change the default text title of Detached table/treetable

Hi,
Is anybody know How to change the default text title of Detached table/treetable.
I have already read the post on "http://vtkrishn.com/2010/07/28/how-to-change-the-default-text-title-of-detached-tabletreetable/"
as per this post It will change the title throughout the application.
I wanted to change only for one particular table.
Thanks,
Charu
Edited by: Charu on Sep 13, 2012 4:14 AM

Hi,
please don't double post and instead continue with your original threat. In the previous post you got the correct answer to use skinning. You did not like the solution as it doesn't allow per-instance titles. I agree with this and a logical consequence is to file an enhancement request instead of re-posting the question. I'll file the ER, so no need to follow up for you anymore
Frank

How to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser

how to disable the selection of "Title and logo URL of a SharePoint 2013 site" from browser or How can we able to set our custom default log to the sp2013 site using code.So that users are not allowed to change from browser again.
Thanks & Regards, Krishna

Hi Krishna,
For your issue, you need to deploy a farm solution using HideCustomAction to hide site settings link. For example to hide “Title, description, and logo” link you can use below code:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<HideCustomAction
GroupId="Customization"
HideActionId = "ProjectSettings"
Location = "Microsoft.SharePoint.SiteSettings">
</HideCustomAction>
</Elements>
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/92f002b7-0e9c-424e-836a-de40c4e5d81f/hide-option-from-site-settings-page-in-sharepoint-2010?forum=sharepointdevelopmentprevious
http://blog.milanchauhan.com/2013/06/add-custom-section-in-site-settings.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to remove the underline from Title of a report.

How to remove the underline from Title of a report.
plz tell.

You have to go inside the title view :-)
Regards,
Stefan

SSRS 2008 - How to chnage the display axis title?

Similar Messages

Maybe you are looking for