Ssrs 2008 r2 keep objects in fixed locations when report is executing

In an exisitng SSRS 2008 r2 report there are currently 5 tablixes. Right now in one of the tablixes, I am adding rectangles and textboxes to the one tablix. As I am adding these items to the SSRS 2008 r2 report, new items that I am adding to the report
do not stay where I placed them originally. In addition, some of the other tablixes are moving around (floating).
Thus may questions are the following:
1. In one particular tablix, is there a way to anchor the rectangles and texboxes (keep them from floating)? If so, would you tell me how to keep fixed point locations?
2. For all the tablixes on the report, is there a way to keep each tablix from flaoting (staying anchored to a fixed location? If so, would you tell me how to keep the various tablixes from floating?

Hi wendy,
Just as you said, the location of report items would be changed depends on the data in other items and page size. There are no such property that can directly make an item stayed at a fixed location. While, if the issue is caused by the page size, we can
change it to an appropriate page size. If the issue is caused by other item data, we can try to use a rectangle to contain those items. Because rectangle is s object container, it can keep objects together on a page and control how object move and push each
other. For more details, please see the following document:
http://technet.microsoft.com/library/Cc966445#XSLTsection132121120120
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Similar Messages

Authorization Object is not working when report is modified.

Hi BW Guru's
We have Company Code as Authorization Object .and we have 3 company Codes (xxxx,yyyy,zzzz).where the users under Company code xxxx are not supposed to view company code yyyy,zzzz data etc.
I modified an existing Report and transported to production.But the Authorization Object is not working for that report.The Report is defaultly displaying all the company codes data(xxxx,yyyy) for all the users.But for the other reports its(company code ) is working fine.
What could be the problem?Is theproblem in transporting the objects.But i transported all the objects inluding auhorization object.
Please send me the solution as it is very much urgent.
The solution will be def. awarded with full points.
Regards
Sanjay

hi Sanjay,
please don't post the same question again, check and response back from your previous thread
Re: Authorization Object is not working when report is Modified.
hope this helps.
would be nice if you reward for helpful answers to all of your previous postings, e.g
docs related to RRI

Ssrs 2008 r2 writingmode=rotate270 font is bold on report server

In a ssrs 2008 r2 report, I am using writingmode=rotate270 to change the direction of header columns for detailed data on the SSRS report. The font in visual studio is 'light'. However when the report is deployed to the report server, the font weight is
bold.
Thus can you tell me if there is a workaround to make the font not bold when it is executed on the report server? If so, can you tell me how to solve the font problem so the font is not bold when writingmode=rotate270 when executed on the report server?

Hi Wendy,
I am able to reproduce the issue in both SQL Server 2008 R2 RTM Reporting Services and the latest version of SQL Server 2008 R2 Reporting Services (SQL Server 2008 R2 SP2 CU10, Build number 10.50.4297). In addition, based on my test, it is fixed in SQL Server
2012 SP1 Reporting Services.
To work around this issue, you can place images in the column header cells and make the rotation of the text in the images. Besides, I would suggest you submitting a wish at
https://connect.microsoft.com/sql.
Connect site is a connection point between you and Microsoft, and ultimately the larger community. Your feedback enables Microsoft to make software and services the best that they can be, and you can learn about and contribute to exciting projects.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Keeping object in same location after transition/increase opacity

Here is what I am trying to do: A box with text on it appears, nearly filling the screen. I click and it flips around and to some different text. When I am finished, I click again and it shrinks and at the same time moves to the upper left hand corner. I click again and the next box appears just like the first one, it flips around, it shrinks down and moves right next to the first shrunken box. I keep doing this until I have 3 rows of 3 boxes.
I have completed the first slide, so that the first box flips and then shrinks and moves to the upper left hand corner. I'm now trying to create a new slide on which the second box will appear. The slide needs to start with that first shrunken box in the corner at the exact same place and the exact size it finished with at the end of the previous slide. Is there an easy way to do this? I'm having a devil of a time getting the sizing and location just right.

You could take a screen shot (Command-Shift-3) of the final position and size of the object, then overlay that image on the next slide to assist with positioning (or just use that image as the slide background).

SSRS 2008 R2 - Column Headers of a tablix visible while scrolling - Then the column headers not visible on 2nd page onwards for PDF EXPORT. it's vice versa. Hence it is possible to provide both at same time ?

Hi,
I am using SSRS 2008 R2.
I have two TABLIX in a report. One is TABLIX with row/clumn grouping. 2nd one is flat view.
Here each tablix is dispaly it's data on single page for each.
My Requirement on First TABLIX is:
1. I have to make column headers visible on scrolling down
2. Export to PDF - column headers must be visible on all the pdf pages for same tablix data.
But ... either one is achieved at my end.
so ... any suggestions please to achieve both at same time.
thank you in advance.
best regards,
venkat.

Hi G.V.Naidu,
According to your description, the first tablix is matrix to use display data.
In SSRS, if we want to fix matrix header visible while scrolling and repeat header columns on each page, we can select the corresponding option to enable this function. Please refer to the steps below:
1. Right click tablix, and select Tablix Properties.
2. Select “Keep header visible while scrolling” and “Repeat header rows on each page” to enable these function.
If we are use table to display data, please refer to the article about Repeat Header / Keep Header Visible in Tables.
http://blogs.msdn.com/b/robertbruckner/archive/2008/10/13/repeat-header-and-visible-fixed-header-table.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and service packs.

SSRS 2008 R2 is extremely slow. The query runs in less than a second in the dataset designer but if you try to view the report it takes over 10 minutes. I have read this is a bug in SSRS 2008 R2. We installed the most recent patches and
service packs. Nothing we've done so far has fixed it and I see that I'm not the only person with this problem. However I don't see any answers either.

Hi Kim Sharp,
According to your description that when you view the report it is extremely slow in SSRS 2008 R2 but it is very fast when execute the query in dataset designer, right?
I have tested on my local environment and can‘t reproduce the issue. Obviously, it is the performance issue, rendering performance can be affected by a combination of factors that include hardware, number of concurrent users accessing reports, the amount
of data in a report, design of the report, and output format. If you have parameters in your report which contains many values in the list, the bad performance as you mentioned is an known issue on 2008 R2 and already have the hotfix:
http://support.microsoft.com/kb/2276203
Any issue after applying the update, I recommend you that submit a feedback at https://connect.microsoft.com/SQLServer/
If you don’t have, you can do some action to improve the performance when designing the report. Because how you create and update reports affects how fast the report renders.
Actually, the Report Server ExecutionLog2 view contains reports performance data. You could make use of below query to see where the report processing time is being spent:
After you determine whether the delay time is in data retrieval, report processing, or report rendering:
use ReportServer
SELECT TOP 10 ReportPath,parameters,
TimeDataRetrieval + TimeProcessing + TimeRendering as [total time],
TimeDataRetrieval, TimeProcessing, TimeRendering,
ByteCount, [RowCount],Source, AdditionalInfo
FROM ExecutionLog2
ORDER BY Timestart DESC
Use below methods to help troubleshoot issues according to the above query result :
Troubleshooting Reports: Report Performance
Besides this, you could also follow these articles for more information about this issue:
Report Server Catalog Best Practices
Performance, Snapshots, Caching (Reporting Services)
Similar thread for your reference:
SSRS slow
Any problem, please feel free to ask
Regards
Vicky Liu

Controlling execution of subreport on main Report in ssrs 2008 R2

Controlling execution of subreport on main Report in ssrs
Hi,
Am using more than 100 subreports in my main report using ssrs 2008 R2.
And given conditional Visibility in sub reports based on the Parameter selection in main Report . But the performance is very very slow in main report.
While selecting single sub report executes in seconds. The same report in main report executes in hours.
According to my view,
All the Sub reports executes and finally conditional visibility is working. Can we Control executing sub reports?
Regards, Gayathri devi P.S. : Please click the 'Mark as Answer' button if a post solves your problem! :)

Hi,
I think the time to render 100 report sure will be long time and the main report want to render those reports.
So first why you do not separate those report on many reports for different purpose.
second if this is a dashboard report you may use many matrix in the same report and the parameters passed by default or based on expression.
I really hope if you make your report as dashboard report, many matrix many parameters render it once. As I remember I think SSRS will try to execute your
DataSets in parallel which will reduce your waiting time.
I hope this is helpful.
Elmozamil Elamir
MyBlog
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
http://elmozamil.blogspot.com

Report created in SSRS 2008 is not able to upload in 2008 report server

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. I'm getting the error given below while uploading the .rdl file to report server.
The report definition is not valid. Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' which cannot be upgraded.
Then I've checked the code of the solution and it is created in 2008. It is given below:
" Microsoft Visual Studio Solution File, Format Version 10.00 # Visual Studio 2008 ........."
Also, I've checked the code of .rdl file but that made me confused. It shows that the file is created in 2010.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Visual studio 2010 is also installed in my system. Also, I have noticed that even if we try to open a report then by default it is showing data tools option.I have tried multiple times to create report in 2008. But, still the same result. Also, I could find
that ,the report will be in 2008 till the creation of data source. The report will be converted to 2010 after creating data set. I have been creating shared dataset and I was getting the above issue.Then I have tried by not creating a shared dataset and
directly creating dataset in the report data and it has been created as 2008 report. I was able to upload this report to report server 2008R2.
Can any of you help me to find why the report is created in 2010 while creating shared dataset?

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. .
xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Hello Julie,
You mix up Version of Visual Studio, Reporting Services and Report Definition; all those products have Independent Version numbers and are not related to each other.
Important are the Versions of used SSRS and BIDS, the plugin for Visual Studio. By the Version of Report Definiton you have create a Report with BIDS 2008R2 or SSDT = SQL Server Data Tools; see
http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition/
Are you sure you have SSRS 2008 R2 (in post subject you wrote SSRS
2008)? If it's SSRS 2008 then you really can't deploy the Report to SSRS, you would have to use BIDS 2008 to create the report. Check the Version of SSRS or use "Report Builder 2.0", you can start it directly from "Report Manager"
URL.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SSRS 2008 R2 Report parameters have default values and report not to auto run

Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
report. But I am looking for solutions other than that.
Thanks in advance..........
Ione

Hi lone,
According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

SSRS 2008 Created Commssion Report, now getting error message when I run this ( need Help)

in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciated

Hi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT        VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
                         CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
                         VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
                         VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
                         CUSTINVOICETRANS.INVOICEDATE
FROM            SALESTABLE INNER JOIN
                         CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
                         CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
                         CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
                         VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
                         CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
                         LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
                         VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
                         VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
                         VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE        (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
                         AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2)

[svn] 2763: add toplevel.abc location when running asc tests

Revision: 2763
Author: [email protected]
Date: 2008-08-06 12:53:29 -0700 (Wed, 06 Aug 2008)
Log Message:
add toplevel.abc location when running asc tests
Modified Paths:
flex/sdk/trunk/build.xml

Revision: 2763
Author: [email protected]
Date: 2008-08-06 12:53:29 -0700 (Wed, 06 Aug 2008)
Log Message:
add toplevel.abc location when running asc tests
Modified Paths:
flex/sdk/trunk/build.xml

How to remove a camera mount object from a fixed location persistent through the entire video

Hi there,
by design a part of my camera mount appears at a fixed location through the entire length of my video. While the scene in the background is usually rotating from left to right or right to left the camera mount is always at the same location of the visual field. How can I remove it using Adobe After Effects CC (2014)? I have seen others doing that but the process appears to be very labour intensive. See for instance:
Watermark Removal - YouTube
After Effects Tutorial - Object Removal - YouTube
Is there a built-in feature in After Effects, which can allow for a single-click removal after say the shape of the camera mount is outlined in a given frame? Can the "void" generated after the removal be automatically filled in with the background image?
I have searched the FAQ but could not find an answer, so I please point me to the right location if this question has been already asked and answered.
Thank you!
Val

The water is going to be very problematic. Mocha Pro is a viable option but there are others using basically the same technique of time shifting the background image. You can do this entirely by hand if you stabilize the shot draw a mask around the offending object, adjust the timing of a copy of the stabilized shot so the background fills the hole, and then removing the stabilization. You can also just use Mocha AE for this kind of time shifting background replacement.
The camera mount coming out of the backpack on the boat will present a lot of problems because the camera is attached to the mount. Tracking the mount won't work, but tracking and stabilizing the boat may. The distortion caused by the extreme wide angle lens is also gong to cause problems when cloning the background because the distortion is not linear and as the scene changes areas of the scene that could be used to fill the hole from the removed camera mount would not necessarily fit. As long as the camera is moving in relation to the boat you may be able to remove most of the mount, but it's going to require some hand painting where the pole is close to the body and attached to the backpack because the background is always hidden by the mount.
The shot on the roof is much easier to handle. As the camera swings around the scene the background will change so a simple mask and time shift should take care of most of the replacement. I would just use Tracking and time shift to fill the hole and scale as necessary.
As another option you can use a program called SunthEyes to create a clean plate from shots like these. If you have the budget that may be a good option. No matter what the option is, the water is going to cause you more problems than anything else because water ripples are random.

Urgent !!! Error SSRS 2008 :The connection cannot be used while an XmlReader object is open."!!!

Hi,
I am trying to create report by writing MDx query. Just one hour back the report was working fine then i have done some changes it started throwing some error like
"An error occured during local report processing
An error has occured during report processing
Query execution failed for dataset'pDate'
The connection cannot be used while an XmlReader object is open."
The report is working withsome date combinations but when ever i am trying to display data with similar dates combinations like startdate: 01-01-2008 and Enddate:01-01-2008 then it is throwing error like this...
Could you please give any idea how to solve this...
Thanks...
maruthisp

While passing the Pdate parameters values to main report query, the parameter values was not proper for the main query. So I checked and modified the main report query to handle all the parameter values when I select from drop down selection.
Maruthi...

How to keep objects centered and fixed when window resized

Hi,
Newbie here with a question about centering. What I'm trying to do is center the content of a website and keep the content fixed in size, but what is happening is when I move the right side of the window toward the left side of the window (i.e. contract the window to a smaller size), the items that are centered, keep moving. For example, if I have a menu bar, I want the menu bar area to be fixed, and stay centered when a window is resized. I've attached images of what I'm talking about to hopefully make this more understandable.
Below is the link I used for information regarding centering:
https://forums.adobe.com/thread/454036
Thank you for your assistance

May I suggest a bit more modern list style menu like the one way down the bottom of this page:
http://www.peattiecapital.com/2014.php
Here is the HTML code (classes on the a tag are optional)
<ul>
   <li><a class="nl2014" href="2014.php">2014</a></li>
   <li><a class="nl2013" href="2013.php">2013</a></li>
   <li><a class="nl2012" href="2012.php">2012</a></li>
   <li><a class="nl2011" href="2011.php">2011</a></li>
   <li><a class="nl2010" href="2010.php">2010</a></li>
   <li><a class="nl2009" href="2009.php">2009</a></li>
   </ul>
The CSS is here:
http://www.peattiecapital.com/archive.css

Ssrs 2008 r2 rectangle causes first page to be blank

In an SSRS 2008 r2 report I have 6 matrixes that I placed into 1 rectangle so that all the individual items do not float.
The problem is that the first page of the ssrs 2008 r2 report is blank when the report is executing.
I have set the report properties to: landscape, custom paper size, width 14" and height = 11". The report properties are width 14 inches and the height is 11 inches. The body properties keep changing to 26.75719 inches and width = 13.54667 inches.
When I set the border of the rectangle to solid, I can see the rectangle when the SSRS report is executing. The rectangle appears before any of the matrixes are displayed. However when I look at the rectangle in design mode, the rectangle is around all
6 of the matrixes.
Thus could you tell me why the rectangle is displayed in a different location when the report is executing and not around all the matrixes at that point?
If there is no property that can be set, then should I have more than one rectangle? To place the objects into separate rectangles, I want to mention that that there is a header matrix and a summary rectangle that need to be shared. Matrix #2 and Matrix #3
are for students in grades 01 to 08. Matrix #4 and #5 are for students in grades 09 to 12.
Can you tell me what I can do so that I do not have a blank first page when the SSRS 2008 R2 report is executing?

Hi wendy,
If we want to use a rectangle as a container for other items, we should drag them into the rectangle. When we move the rectangle, the items that are contained within the rectangle move along with it. An item within the rectangle shows the name
of the rectangle in its Parent property.
For more information about using a rectangle as a container, please see:
Add a Rectangle or Container (Report Builder and SSRS)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Ssrs 2008 r2 keep objects in fixed locations when report is executing

Similar Messages

Maybe you are looking for