SSRS 2008 R2 not processing subscriptions

Hi,
I have a RS 2008 R2 SP3 Service in SharePoint Integrated Mode.
Since 5 days my Subscrictions were not sent anymore. I did no changes to these mashines. There were some data driven subscriptions in pending state. I delete these entries via SharePoint.
When I look at Report server Execution Logs, there is no error, that i can associate to subscriptions. New Subscription are created and deleted in the Log, but they will never been processed.
I have done a Reboot to the RS Box but, that was not the solution.
Any Idea?

Did you check for any error messages in event/application log?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Similar Messages

Report created in SSRS 2008 is not able to upload in 2008 report server

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. I'm getting the error given below while uploading the .rdl file to report server.
The report definition is not valid. Details: The report definition has an invalid target namespace 'http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition' which cannot be upgraded.
Then I've checked the code of the solution and it is created in 2008. It is given below:
" Microsoft Visual Studio Solution File, Format Version 10.00 # Visual Studio 2008 ........."
Also, I've checked the code of .rdl file but that made me confused. It shows that the file is created in 2010.
<?xml version="1.0" encoding="utf-8"?>
<Report xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns:cl="http://schemas.microsoft.com/sqlserver/reporting/2010/01/componentdefinition" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Visual studio 2010 is also installed in my system. Also, I have noticed that even if we try to open a report then by default it is showing data tools option.I have tried multiple times to create report in 2008. But, still the same result. Also, I could find
that ,the report will be in 2008 till the creation of data source. The report will be converted to 2010 after creating data set. I have been creating shared dataset and I was getting the above issue.Then I have tried by not creating a shared dataset and
directly creating dataset in the report data and it has been created as 2008 report. I was able to upload this report to report server 2008R2.
Can any of you help me to find why the report is created in 2010 while creating shared dataset?

I have created a report in SSRS 2008 version. Our reporting server is 2008 R2. .
xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition">
Hello Julie,
You mix up Version of Visual Studio, Reporting Services and Report Definition; all those products have Independent Version numbers and are not related to each other.
Important are the Versions of used SSRS and BIDS, the plugin for Visual Studio. By the Version of Report Definiton you have create a Report with BIDS 2008R2 or SSDT = SQL Server Data Tools; see
http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition/
Are you sure you have SSRS 2008 R2 (in post subject you wrote SSRS
2008)? If it's SSRS 2008 then you really can't deploy the Report to SSRS, you would have to use BIDS 2008 to create the report. Check the Version of SSRS or use "Report Builder 2.0", you can start it directly from "Report Manager"
URL.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Ssrs 2008 r2 date parameter not working all the time

In an SSRS 2008 r2 report, I am not getting some records selected when I run the report in the ssrs 2008 r2 report.
However when I run the sql in ssis manager, the records are selected. Thus I am trying to determine why some of the records are not selected whe running the ssrs report.
In the table called 'transactionfile', the fields that I am trying to determine where there is a problem is the following:
SchoolNumber (varchar(50),null), and
TransactionPaymentDate (varchar(50),null).
Examples of data are SchoolNumber = '121' and TransactionPaymentDate = '04162014'
In the SSRS report, the parameter value for @SchoolNumber is text and the parameter value for @EndDate and @StartDate is date/time.
The following is the query I am having a problem with:
SELECT s.SchoolNumber,
      CONVERT(smalldatetime,substring(TransactionPaymentDate,5,4) + '-' + substring      (TransactionPaymentDate,1,2)+ '-' +
substring(TransactionPaymentDate,3,2)) as        TransactionPaymentDate
from [eF].[dbo].[transactionfile] f
       INNER JOIN
    [eF].[dbo].schools] s
    on rtrim(ltrim(s.SchoolNumber)) =rtrim(ltrim(f.SchoolNumber))
where rtrim(ltrim(s.SchoolNumber)) = rtrim(ltrim(@SchoolNumber))
      AND
      Cast(Right(TransactionPaymentDate,4)+Left(TransactionPaymentDate,4) as Date)
        >= @StartDate
     AND
   Cast(Right(TransactionPaymentDate,4)+Left(TransactionPaymentDate,4) as Date) <= @EndDate
Thus could you suggerst what could be wrong when selecting some records by date?

First check whether transaction payment date has 8 digit or not. In yes then try the below query,
SELECT s.SchoolNumber,
CONVERT(smalldatetime,substring(TransactionPaymentDate,5,4) + '-' + substring(TransactionPaymentDate,1,2)+ '-' +
substring(TransactionPaymentDate,3,2)) as TransactionPaymentDate
from [eF].[dbo].[transactionfile] f
INNER JOIN [eF].[dbo].schools] s
on rtrim(ltrim(s.SchoolNumber)) =rtrim(ltrim(f.SchoolNumber))
where rtrim(ltrim(s.SchoolNumber)) = rtrim(ltrim(@SchoolNumber))
AND
cast(substring(TransactionPaymentDate,5,4) + '/' +
substring(TransactionPaymentDate,1,2)+ '/' +
substring(TransactionPaymentDate,3,2) as date) between @StartDate AND @EndDate
Regards, RSingh

SSRS 2008 Work order Report , when added item descriotion , somehow costgroup id is not working , donot know why, ( need help)

SSRS 2008 Production orders created report, when I added item description some how cost group id is not working ,
my costgroup id did not break into labor , only Mat Cost showed in the total,
my query is as below, did I link the wrong field,   I want to show Labor total also
can some one suggest what I did wrong .
any advise will be great
SELECT        PRODTABLE.PRODID, PRODCALCTRANS.COSTGROUPID, PRODTABLE.QTYCALC, PRODTABLE.PRODSTATUS, PRODCALCTRANS.COSTAMOUNT,
                         PRODCALCTRANS.COSTMARKUP, PRODCALCTRANS.REALCOSTAMOUNT, PRODCALCTRANS.CALCTYPE, PRODTABLE.DATAAREAID, PRODCALCTRANS.KEY3,
                         PRODCALCTRANS.CONSUMPVARIABLE, PRODCALCTRANS.REALCONSUMP, PRODTABLE.ITEMID, PRODTABLE.SCHEDDATE, PRODTABLE.FINISHEDDATE,
                         PRODCALCTRANS.KEY1, PRODCALCTRANS.TRANSDATE, PRODCALCTRANS.QTY, PRODCALCTRANS.KEY2, PRODCALCTRANS.COLLECTREFLEVEL,
                         PRODCALCTRANS.LINENUM, INVENTTABLE.ITEMNAME, INVENTTABLE.ITEMID AS Expr1, PRODTABLE.INVENTTRANSID
FROM            PRODTABLE INNER JOIN
                         PRODCALCTRANS ON PRODTABLE.PRODID = PRODCALCTRANS.PRODID AND PRODTABLE.DATAAREAID = PRODCALCTRANS.DATAAREAID INNER
JOIN
                         INVENTTABLE ON PRODCALCTRANS.DATAAREAID = INVENTTABLE.DATAAREAID AND PRODCALCTRANS.KEY1 = INVENTTABLE.ITEMID
WHERE        (PRODTABLE.PRODSTATUS = 7) AND (PRODTABLE.DATAAREAID = N'AR1') AND (PRODTABLE.ITEMID = @itemid) AND
                         (PRODTABLE.FINISHEDDATE >= @Paramfromdate) AND (PRODTABLE.FINISHEDDATE <= @Paramtodate) AND (PRODCALCTRANS.COLLECTREFLEVEL
= 1) AND
                         (PRODCALCTRANS.CALCTYPE >= 0)

Hi Bitia,
As per my understanding, after you add Item field to the report, it does not calculate total of matl group, right? If that is the case, please refer to the following steps to troubleshoot the problem:
Modify the dataset used to retrieve data, delete the fields will not be used in the report.
Run the query in SQL Server Management Studio (SSMS) to make sure that there is data for matl cost group.
Make sure that row group and totals are correctly added.
In addition, do you want to add Finished date to page header? If that is the case, we can use ReportItem to achieve the goal. Please refer to the following steps:
In design surface, right-click the report and click Insert, then click Page Header.
Drag Text Box from Toolbox to page header.
Right-click inside of Text Box, then click Expression.
In the expression text box, type the code like below:
=ReportItems!FinishedDate.Value
If the problem remain unresolved, please provide the screenshot of the report in design view, the following screenshot is for your reference:
Reference:
ReportItems Collection References
Adding Grouping and Totals
Thanks,
Wendy Fu

SSRS 2008 R2/SSRS 2012 Tab Delimited setup is not working correctly in Report Designer

I have changed a RSReportDesigner.config to add a tab delimited option for report export, but it is not working correctly in vs2008/vs2010 report designer. I get a duplicate of CSV (comma delimited) in the export dropdown list.
I have tested SSRS 2008 R2/SSRS 2012 on Windows 7 64 bit professional.
It is working correctly in the report manager.
<Extension Name="TAB" Type="Microsoft.ReportingServices.Rendering.DataRenderer.CsvReport,Microsoft.ReportingServices.DataRendering">
       <OverrideNames>
           <Name Language="en-US">TAB delimited</Name>
       </OverrideNames>
       <Configuration>
           <DeviceInfo>
               <FieldDelimiter xml:space="preserve">	</FieldDelimiter>
               <Encoding>ASCII</Encoding>
               <UseFormattedValues>False</UseFormattedValues>
               <NoHeader>False</NoHeader>
               <FileExtension>TXT</FileExtension>
           </DeviceInfo>
       </Configuration>
      </Extension>

Hi Dave0323,
According to your description, you want to export your report into TXT file and change the delimiter to be a Tab. Right?
In Reporting Services, when exporting to a CSV file, we can change the default field delimiter to any character that we want, including TAB, by changing the device information settings in the configuration file. For example, to use TAB,
update the FieldDelimiter setting to <FieldDelimiter xml:space="preserve">[TAB]</FieldDelimiter>. And we can change the FileExtension to be TXT if we want to export it into a TXT file. So in this scenario, we just need to modify the configuration
file like below:
The result looks like below:
Reference:
CSV Device Information Settings
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

SSRS 2008 Gauge ToolTips - expression does not work?

Hi,
I'm attempting to use various SSRS 2008 gauges in a report. When I attempt to use an expression in a tooltip such as '=Sum(Fields!ID.Value)' , the tooltip does not show up.
However if I replace that expression with a static value such as '1' it pops up.
It seems that an expression should work? Any reason that it would not?
Thanks

Hi,
I could reproduce the scenario you posted.
It is caused that string type is required for the
ToolTip property of the Gauge Pointer. So, please change the expression to
=CStr(Sum(Fields!ID.Value)).
If you have any question, please feel free to ask.
Thanks,
Tony Chain
Tony Chain [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Not being asked for credentials in SSRS 2008 R2 for Firefox and Safari

I have an instance of SSRS 2008 that is currently working on all browsers (the URL is something like reports.foo/reports).
I spun up a new instance of SSRS and placed it on the url report01.foo/reports. This new instance is connected to a different domain (I am spining up a Active Directory Domain and trying to build out our infrastructure, so the logins are different).
I am able to access the new URL (report01.foo/reports) from IE and Chrome. It is asking for the username/password and able to get on just fine.
However, when I try to go to the new URL (report01.foo/reports) using Safari and Firefox, it never asks for credentials and shows a blank page. This does not happen for the old URL (reports.foo/reports), only the new URL.
Any ideas?

Hi Ben,
Per my understanding that you have configured windows authentication and which by default will not prompt for credential. So I assumed you have changed the User Authentication setting in the security setting to pop up for credential, for example like below(IE),
If so, your issue about the pop up credetial not pop up in Firefox and Safari can be caused by the related security setting, If you give Anonymous User rights, you may got the blank page:
Details information about similar issue in threads below for your reference:
how to change reporting service site seurity setting?
SSRS in firefox not asking for credentials
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support

Ssrs 2008 r2 error-Forward pointing dependencies are not valid

In an existing SSRS 2008 r2, report, I am attempting to add a parameter called 'Customer_Category'. I am getting the following error message:
The report paramter 'CustomerNumber' has a DefaultValue or a ValidVaue that depends on the report parameter 'Customer_Category'. Forward pointing dependencies are not valid.
I am trying to determine how to fix this error. The 'CustomerNumber' is a parameter value that is obtained by reading from a dataset. In this dataset there are existing other parameters called 'Customer_Type' and 'Customer_Preference'. Both of these parameters
obtain there values from selections that the user makes when the SSRS report is executing. There are no default values.
I am trying to have the 'Customer_Category' be the same way where there are no default values and the user must select the parameter value when the report is executing. There should only be one value that the user can select from.
The new parameter called 'Customer_Category' is the last parameter in the list of parameters. Does the order of parameters make a difference? If so, how can I move the 'Customer_Category' parameter in front of the customer_number parameter?
Here is the sql that is used from obtaining a list of customers from the dataset for customer_number:
SELECT   Distinct CustomerNumber
FROM   BridgeUserCustomer
WHERE
         Type = @Customer_Type
AND Preference = @Customer_Preference and Category = @Customer_Category
GROUP BY CustomerNumber
Would you tell me what is wrong and what I can do to solve the problem?

Create independent datasets for each parameter and try once.
Regards, RSingh

SSRS 2008 R2 Report parameters have default values and report not to auto run

Hi, I am using SSRS 2008 R2 one of my requirements for a Report is all the parameters have default value and I do not want this report to auto run when users open this report. I can create a dummy hidden parameter to break the auto run for this
report. But I am looking for solutions other than that.
Thanks in advance..........
Ione

Hi lone,
According to your description, you have a report with parameters. Now you want you report not to run automatically with your parameters default values. Right?
In Reporting Service, if you have parameters with default values in your report, your report will always auto run with these default values. We can say these default values are used for report running initially. So for your requirement, if you really need
to see your default value before the report running, the best workaround is set one more parameter to break the auto run like you have done. If you just want your report not to auto run, your can achieve it by removing those default values.
Reference:
Report Parameters (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou (Pactera)

SSRS 2008 R2 Services not restarting automatically after reboot

SSRS 2008 R2 Reporting instance not restarting automatically after patches install. Is there a way to resolve the issue
Windows 2008 R2 Server
16 GB RAM

Hi,
Follow this article to resolve the issue:
Reporting Services service doesn't start after the installation of MS12-070 security patch
http://blogs.msdn.com/b/mariae/archive/2012/11/12/reporting-services-service-doesn-t-start-after-the-installation-of-ms12-070-security-patch.aspx
Workaround 1:
Modify the registry to increase the default time-out value for the service control manager. To increase this value to 60 seconds, follow these steps:
1. Click Start, click Run, type regedit,and then click OK.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control.
3. In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must créate it. To do this, follow these steps:
a.On the Edit menu, point to New, and then click DWORD Value.
b.Type ServicesPipeTimeout, and then press ENTER.
c.Right-click ServicesPipeTimeout, and then click Modify.
d.Click Decimal, type 60000, and then click OK.
This value represents the time in milliseconds before
Restart the computer for the changes to take effect. Check that SSRS services can be started now.
You cannot start SQL Server Reporting Services after you apply the update that is discussed in KB 2677070
http://support.microsoft.com/kb/2745448/en-us
Thanks.
Tracy Cai
TechNet Community Support

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS 2008 R2 Calendar Control not working and report not refreshing on pressing enter in Chrome.

SSRS reports are always best viewed in IE and the report result what you see in IE always will not be same and consistent in thirdy party browswers.
So consider using IE as workaround.
Also please refer:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/2188de10-cff9-4e24-b14f-da5121f1c4a4/ssrs-calender-control-not-visible-in-chorme-on-server?forum=sqlreportingservices
Workaround here:
http://www.rajbandi.net/Fixing-SSRS-Report-Viewer-control-date-picker-in-Google-chrome/
-Vaibhav Chaudhari

Ssrs 2008 and Kerberos both work separately; but not together

Sorry that this question is very similar to some others that have been asked on this forum. Unfortunately, none of the solutions I've been able to find here or elsewhere have solved my problem.
I'm trying to create some reports on data in a SharePoint site. SharePoint is version 2010 and my SQL Server Reporting Services (SSRS) is running off of SQL Server 2008 (NOT 2008 R2). Both these systems have been in use by my organization for some time and
sadly upgrading them is not practical in the immediate future.
I know that I have Kerberos working properly on the Reporting Server because I created a test report that draws data off of another SQL Server -- not a SharePoint site -- and I can demonstrate a successful double-hop by running that report from a client
machine such as my development PC. (authenticates client -> ssrs server -> data server with no problems)
Since SSRS 2008 and SharePoint 2010 aren't directly compatible (from what I've been able to find) I've set up SharePoint as an XML data source within my report. I know that the data source is working and authenticating on it's own, because
if I access the report server web service directly from the machine that's hosting SSRS, I can run my SharePoint XML data source report properly.
However, when I try to run the SharePoint XML data source from a client machine (thus requiring a double-hop) I receive the following error:
The remote server returned an error: (401) Unauthorized. (rsXmlDataProviderError)
All of my SharePoint web applications are set up to use Kerberos authentication, all of my SharePoint and SSRS service accounts are set up for delegation, and I've checked my SPN's numerous times to ensure that there are no duplicates and that all involved
servers and ports have been accounted for. My SSRS config file has authentication set to "Negotiate."
I'm obviously missing something, but I've reached the point where reading troubleshooting guides and set up instructions is just leaving me repeating things I've already tried. If anyone has any advice that could point me in the right direction on this problem,
I would greatly appreciate it!

Hi,
Have you checked the following similar article if you used the "Credentials stored securely in the report server" option? Please let us know your results.
http://stackoverflow.com/questions/15033100/error-while-passing-credentials-from-ssrs-to-sharepoint-data-source
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ab4ce91f-f1db-4567-a40a-7a11d02cbc05/ssrs-and-sharepoint-list-the-remote-server-returned-an-error-401-unauthorized?forum=sqlreportingservices
http://blogs.technet.com/b/rob/archive/2011/11/23/enabling-kerberos-authentication-for-reporting-services.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Restored our SSRS 2008 R2 from one server to another; Dates are in UK format and not US

We have restored our SSRS 2008 R2 from one server to another. The original server was in US locale/culture. The new server was in UK locale/culture, when the restore happened. However it should have been in US locale/culture. We have made this change and
new reports work OK.
However existing reports (i.e. saved by a user) are still trying to use the US dates in a UK format and as a result throwing a date cant be below 1753 error.
Has anyone seen this issue before or have any idea what we need to do to fix it?
Thanks
Kimberlad

Hi Kimberlad
Have you checked any changes in the Collation?
Please verify Reporting Server Databases and Server Collation is there any mismatch with your Source Server.
and also please post complete Error message..
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful ::

SSRS 2008 R2 - Column Headers of a tablix visible while scrolling - Then the column headers not visible on 2nd page onwards for PDF EXPORT. it's vice versa. Hence it is possible to provide both at same time ?

Hi,
I am using SSRS 2008 R2.
I have two TABLIX in a report. One is TABLIX with row/clumn grouping. 2nd one is flat view.
Here each tablix is dispaly it's data on single page for each.
My Requirement on First TABLIX is:
1. I have to make column headers visible on scrolling down
2. Export to PDF - column headers must be visible on all the pdf pages for same tablix data.
But ... either one is achieved at my end.
so ... any suggestions please to achieve both at same time.
thank you in advance.
best regards,
venkat.

Hi G.V.Naidu,
According to your description, the first tablix is matrix to use display data.
In SSRS, if we want to fix matrix header visible while scrolling and repeat header columns on each page, we can select the corresponding option to enable this function. Please refer to the steps below:
1. Right click tablix, and select Tablix Properties.
2. Select “Keep header visible while scrolling” and “Repeat header rows on each page” to enable these function.
If we are use table to display data, please refer to the article about Repeat Header / Keep Header Visible in Tables.
http://blogs.msdn.com/b/robertbruckner/archive/2008/10/13/repeat-header-and-visible-fixed-header-table.aspx
If there are any misunderstanding, please feel free to let me know.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

SSRS parameters are not valid in subscription, but are valid when run report on-demand

What is the cause?
Somebody has also that problem? Can it be the report or the SSRS server itself?
The SSRS is also not always consequent. So share me your experience.
Thanks!

Sorry did understand what the issue is. Have you set a default value for parameters?
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

SSRS 2008 R2 not processing subscriptions

Similar Messages

Maybe you are looking for