SSRS 2008 - report layout not updating after uploading new version

So I changed the layout from portrait to landscape on a report, uploaded it again (marking it to be overwritten), but when doing a print preview or actually printing the report to the printer or pdf, the layout has not changed.  Is something being cached?
 I even deleted the report and uploaded again, still the same thing.
suggestions?
[edit]
I looked oln the 'Execution' tab of the report in ReportManager, and the radio button for "always run this report with the most recent data" was selected.

Disregard...  duh, I was loading them from a previous folder that had older reports in it.  Nothing like stupid user error to waste an hour.
Note:
Make sure you know where your loading your RDL files from 

Similar Messages

  • Firefox will not update after installing new version

    I have repeatedly updated Firefox (both by updating and by uninstalling completely and re-installing a fresh copy of the latest version) and when I go to HELP > ABOUT FIREFOX it shows I have version 6.0.2
    BUT
    SEVERAL sites (including Mozilla.com) give me pop-up notices saying I am using an outdated version of Firefox and need to upgrade. Firefox on this PC even looks and acts different than it does, for example on my other Windows 7 PC (which also has v 6.0.2)
    HOW can I get Firefox to actually fully update itself and not only report that it's the latest version (I see that in the config it's reporting v 3.0.11) but to act like the latest version?
    Like I said, I have tried uninstalling it completely and installing a fresh copy downloaded from Mozilla.com.

    Your User Agent used to post with is Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 FBSMTWB
    See https://support.mozilla.com/en-US/kb/new?title=Web+sites+or+add-ons+incorrectly+report+incompatible+browser
    Check the '''general.useragent''' prefs on the '''about:config''' page.
    You can open the '''about:config''' page via the Location (address) bar, just like you open a website.
    Filter: '''general.useragent'''
    If any '''general.useragent''' prefs are bold (user set) then right-click that pref and choose '''Reset'''.
    It may likely be due to the FBSMTWB on end of your useragent that the Fast Browser Search toolbar extension you have now or had and it added on to UA.

  • Itunes will not update to a newer version.

    Itunes will not update to a newer version. The error received sates an older version could not be removed.

    The error is specifically an older version of Itunes could not be removed.
    Many thanks, alex. We'll first try the iTunes variation of my standard instructions, then.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • Why can i not update to the new version of iPhoto and Garageband through the appstore?

    When trying to update, I keep getting the pop-up:
    "We could not complete your request
    There was an error in the App Store. Please try again later. (null)".
    How can I update to the new version?
    Im running on the OS X Lion 10.7.4 system for Macbook Pro I have the Version 9.2 of iPhoto and 6.0.4 of Garageband. If that's of any assistance.

    sig wrote:
    Because you don't. You update using Software Update or by going to the Apple web site.
    I think iLife is being updated from MAS now, thus the need for a AppleID to update it.
    One person had iLife and tried to update with a differnent AppleID and it rejected it, seems they bought a open box machine and iLife was installed using another AppleID for display purposes.
    When one reinstalls Lion, and has to install iLife, they have to go to MAS to do it.
    Restoring iLife applications after Internet Restore of OS X Lion
    If you reinstall Lion on a new Mac that shipped with OS X Lion installed, on an erased or replaced hard drive, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
    After installation, start from Lion.
    Double-click the App Store icon in the dock.
    Enter your Apple ID and password.
    Click Purchases.
    If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
    You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to compete installation of your applications.

  • Flash Player not working after downloading new version

    I downloaded Flash Player 10 and it does not work.I am using Windows XP and Internet Explorer. I have tried the trouble shooting. I have made sure its enabled under Active X and it does not work at all now. I have tried to download Flash Player 9 and now that will not download. I regularly use site that require Flash and I am shut down until I can figure out what is wrong. Please help.

    I have the same issue after I was prompted yesterday to upgrade my Flash player. With the new version, 2/3 of Flash pages do not work. But 1/3 do work !
    Example of page that does not work with new version of Flash :
    http://www.youtube.com/  (the whole site)
    http://www.adobe.com/fr/products/flashplayer/  (Adobe's official Flash page !)
    Example of page that does work with new version of Flash :
    http://www.voleursdechevaux.be/page_flash.html
    On first glance, I would say that Flash loaded through JavaScript fails. Only Flash embedded through HTML works. But I am not competent enough to discover why.
    Here is my current configuration (the version test at http://kb2.adobe.com/cps/155/tn_15507.html works well) :
    Player Version : WIN 10.0.22.87
    Debug Player : no
    Operating System : Vista
    Browser : Internet Explorer 8
    Locale : French

  • I cannot update to New version of iPhoto.  Still have older version despite uninstalling application and redownloading it?  any suggestions.  My current version is the 2012 version, but it is not updating to the new version

    I updated to OS X Mavericks.  I updated all of the new iLife applications.  iPhoto is not updating to new version.  I have iPhoto '11. 
    The icon on the dashboard has the new logo, however when I open the application it hasn't updated.  I tried deleting the application and redownloading it.  Still stuck with old version

    I have exactly the same problem as carson.
    iPhoto tells me that I have Version 9.5, and the info-page tells me "iPhoto 11, Version 9.5 (902.7)", and the logo is the new one.
    However, the programme is exactly the same as the old version - not just similar, exactly the same! The screenshots on the apple-website show a dark grey, almost black interface, for example (like the new iMovie). However, my version still shows the old light grey.
    I deleted the iphoto-app entirely (and was horrified to lose all my photos), but that also didn't work out.

  • JSP is not updated after redeploying new war file

    Hi
    I have a simple code change in JSP in a war file. When I redeploy the war file, I do not see modified JSP. Very strange.
    I am using Weblogic 8.1 and copying new war file under Admin/upload folder.
    Thank you
    RM

    Here are the steps:
    1. Modify JSP
    2. Run ant to create new war file
    3. Copy war file to Weblogic's Admin/upload/web_module_name folder
    Redeploy Application from console or restarting admin and appserver does not seem to unjar modified war file into Admin/upload and Stage folders. Can someone tell me how to force weblogic to take this new war file to deploy into Stage area?

  • Itunes and Iphoto not responding after uploading new software

    Hi
    Afew days ago I did the Apple Software Update and since then I haven't been able to get onto my Itunes or Iphoto, both of which I use quite often. Itunes just doesn't load at all and Iphoto starts to open the page but then doesn't respond at all. I am just wondering why this is happening and whether it's happened to anyone else at all? Ideally I'd like to get rid of this new update but don't know how to go about it. I'm a bit of a computer dunce so if you could offer any solution in a straightforward way I would be so grateful. Thanks!

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to iTunes or iPhoto for Mac OS. You should post related questions in the iTunes and iPhoto forums

  • SSRS 2012: Report Header PrintOnFirstPage-problem after report migration from SSRS 2008

    Hi ,
    I developed my report using VS 2008 IDE and the report header property "PrintOnFirstPage" is set to False.
    The content of the header are some textboxes and lines that should show only on page number > 1.
    This works fine in VS 2008 IDE in preview mode as well as with reports rendered by SSRS 2008 report server.
    Recently I migrate&convert the same report to SSRS 2012 I noticed a different rendering behaviour of my report.
    So in VS 2010 preview mode, the page headers content (textboxe etc.)  is not visible on first page but the headers space did not colapse as it does in VS 2008 IDE preview mode.
    I checked all the report properties but unable to find a solution to my problem.
    I was able to reprduce the same behaviour by creating a new report using VS2010 IDE.
    Any ideas are greatly appreciated
    Thanks
    Bodo

    Hi BodoHH,
    I have tested on my local enviorment and can't reproduce the issue, the issue can be caused by many factors, it can be caused by the properties setting and can also caused by the visual studio, Detais information below for your reference:
    As you mentioned that you have check all the report properties, please also check the tablix,Page Header,report body properties to see if the size are the same with that in the SSRS2008.
    Please open this rdl report in the report builder to see if the print layout is correct, if it works fine, the issue can be caused by the visual studio.
    Please also try to upload the rdl report to report manager to check the layout.
    Please also provide the snaphot of the layout in VS2010 to let us better analysis about the issue.
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

  • Alter nate color applied in SSRS report is not updating correctly when you export to excel

    alternate color applied in SSRS report  is not updating correctly when you export to excel. Please let me know how can I resolve this issue
    Smash126

    Expression I am using report is
    =IIf(RowNumber(
    Nothing)
    Mod2 = 0,
    "Silver",
    Nothing)
    Smash126

  • Strange issue with a huge SSRS 2008 report (supposed to return 3 million records)

    Hi,
    NOTE: The strange part (as mentioned in title) will come in the end.
    I am running a SSRS 2008 report which fetches 3 million records from a remote server. After around 1 hour the report processing stops and I see an error icon on the lft bottom of the browser window. When I click on that to see the error details it shows
    some PageRequestManagerSQLErrorException with an unknown error message with code 12029 (sometimes 12002).
    When I see the reportserver logs there is an error message logged in it which says "Microsoft.ReportingServices.Library.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the
    database is required for all requests and processing. ---> Microsoft.ReportingServices.Library.ReportServerDatabaseUnavailableException: The report server cannot open a connection to the report server database. A connection to the database is required for
    all requests and processing. ---> System.InvalidOperationException: Timeout expired.  The timeout period elapsed prior to obtaining a connection from the pool.  This may have occurred because all pooled connections were in use and max pool size
    was reached."
    The <DatabaseQueryTimeOut> value in the report server configuration file is already having a value set to 7200 seconds(2 hours).
    NOW, the strange part is, when I open the ExecutionLog2 table in ReportServer database, there is an entry for the same report with the status as "success" !!!
    My head is spinning over this issue, somebody please rescue.
    Regards.

    Not sure if this will help but you might give it a try :
    1. Open the Registry Editor.
    2. Navigate to the registry path below.
    HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Tcpip\Parameters\
    3. Create a DWORD value MaxUserPort.
    Value name
    MaxUserPort
    Value data (in Decimal)
    10000
    4. Restart the server.
    5. Check and confirm that the registry key ‘MaxUserPort’ is added.
    Do the same process as above for TCPTimedWaitDelay and reduce the value to 60.  The above steps are to increase the maxuserports and reduce the time_wait in order to free up resources on the server.

  • SSRS-2008 reports problem in DMP 4400 standalone(tvzilla)

    Hi guys,
    Does anyone knows how I can to render SSRS-2008 reports in DMP 4400 standalone and its browser(tvzilla = Firefox 2.0.0.18) ?
    My frimework version on DMP is 5.4.1(lastest)
    I google for it and found something like an answer, but it seems to be mostly for Safari and Chrome...
    http://stackoverflow.com/questions/5968082/ssrs-2008-r2-ssrs-2012-reports-are-blank-in-safari-and-chrome
    Thank you in advance !
    Regards,
    Hristo.

    Hoang,
    In SSRS 2005, white spaces are automatically ignored. But in 2008 this behavior gets changed and by default whitespaces are not ignored.  But, There is Report property
    ConsumeContainerWhitespace which is set to False by default. We can remove blank space at end by setting
    ConsumeContainerWhitespace to true.
    The logic to prevent the unnecessary pagebreak is
    - ReportBody width should be less then Pagesize(width) – Left Margin – Right Margin
    - ReportBody height should be less then Pagesize(Height) – Top Margin – Bottom Margin – Header height – Footer height
    Thanks, Sandip Please "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.

  • Recent files list is not updating after 10.1.13

    Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer.   If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update.  The recent files list updates only if I open the file from the same drive listed under Network.

    Hi Bert ,
    You might want to report for a possible bug.Please refer to the following link for the same.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
    Regards
    Sukrit Dhingra

  • [svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

    Revision: 5489
    Author: [email protected]
    Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
    Log Message:
    i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
    Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
    QE Notes: None
    Doc Notes: None
    Bugs: SDK-20148
    Reviewer: Deepa
    tests: checkintests, mustella
    Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-20148
    http://bugs.adobe.com/jira/browse/SDK-20148
    Modified Paths:
    flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
    flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

    FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Maybe you are looking for