SSRS 2008r2 ESRI Maps - Wo to Hide Spacial Data

Hi
I've got a ESRI Map with a lot of Towns (See Picture Below)
I've got some analytical data for some of these bullets / towns.
The mapping happens successful and I get some colored bullets, but unfortunately the remaining "null" value bullets stay in the picture, too.
So finally I would like to hide all the remaining
"no matching" bullets from the spacial data input, and show only the matched, colored bullets that are filled with the analytical values.
Now I can't find how to achieve this.... When I set the filter, this is only for the analytical data, and not for the spacial data... should I maybe try to find another ESRI?
Thanks for your help!

Hi Lukas,
I was wondering if we could set color properties of the point to transparent or something. In this way, we should see only the points with data.
And if you are thinking of importing data from Shapefile, you can use Shape2SQL which is free and easy to use
http://sharpgis.net/page/Shape2SQL.aspx
Cheers,
Jason
P.S. : Please click the 'Mark as Answer' button if a post solves your problem! :)

Similar Messages

SSRS 2008 R2 Map doesn't render (won't display when you preview it)

I'm trying to create a map where it displays the count of people in my DB for each state. There are 126,000 records in the dataset. I've looked at a dozen videos and gone through step by step instructions to make sure I'm not missing something.
The map will never render when I preview it. It stays gray and no data displays. I can't for the life of me figure out what is wrong!! Can anyone point me in the right direction? I'm using the Map Gallery and doing a Color
Analytic map. I'm trying to display count(state) - but have also tried counting the id of the person. It's driving me nuts!

Hi Cfiller,
According to your description, you create a Color Analytic map using Map Gallery. When previewing the report, the map stays gray and no data displays.
In Reporting Services, a Color Analytic map must include the spatial data and the analytical data. In your scenario, since you design a Color Analytic map using Map Gallery, the spatial data is already embedded in reports located in the map gallery, then
you should add analytical data to the map. As you mentioned the analytical data for count of people comes from the database, you must specify match fields to relate the spatial data and the analytical data when designing the map. If there is no match fields
in the map, it’s expected that no data will display when previewing. So please check if you specify the match fields correctly.
Reference:
Maps (Report Builder and SSRS)
SSRS R2 Map Control Item Does Not Render in Preview
or when Deployed to Report Server
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Integrate ESRI maps with Webi

Hi,
I know we can integrate ESRI with dashboard but not directly with Webi.
Any idea how we could achieve this using a work around?
Thanks,
Arun

Hello Arun,
Although the Esri Maps plugin has no direct integration to webi, a work around through BI Workspaces is mentioned on the Esri Maps forum. http://forums.arcgis.com/threads/101718-Esri-Maps-for-SAP-Business-Objects-1.0-released!
If you have more questions on this, post your questions on that forum and I am sure the Esri team will be happy to assist you.
Hope this helps.
Shirley

J2me and Esri Map Objects

Hello all j2me developers:
I want to show the map of the city i live on my phone as a city guide, For this, I think using Esri map objects java edition. But I don't have enough information about this subject.If is there someone has information about this, I ask some help.
thanx everyone
Message was edited by:
ahmets43
Message was edited by:
ahmets43

good luck !!!
http://www.esri.com/software/mojava/about/sys-reqs.html

How to hide the data in particular table in oracle 10g

How to hide the data in particular table in oracle 10g
i want steps

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

Is it possible to hide the data in a formatted cell until the data from the relevant cells has been entered?

I have a balance sheet and I'd like to be able to hide the data in the balance column until the 'In' or 'Out' for that day has been entered
Any ideas greatfully received!

Hi Quinn,
I am surprized that apple makes me go to a custom rule to chose a white font color.
To get
Or use the colour window: View > Show Colors (shift command c).
Click on a colour to apply it to text of selected cells.
Drag a colour to the selected cells to apply it as the Fill:
Some of the features that we thought were lost are just Hidden in Numbers 3! (I can't wait for a decent User Guide).
Regards
Ian.

Error in mapping generation when using a data rule

I hope someone can point me in the right direction on this one. I've searched all over but can't find a similar problem anywhere.
This is OWB Client 10.2.0.1.31 and repository 10.2.0.1.0 in a 10g SE database . I have a table on which I have defined a data rule, which is deployed in the database along with its corresponding error table. The rule I have used is the built-in IS_DATE and it is applied to a VARCHAR2 field that will store a date in a specific format. I have defined the table as an operator in a mapping, and set the IS_DATE data rule action to MOVE TO ERROR. When I try to deploy the mapping I get the follwoing errors in the log:
Warning ORA-06550: line 244, column 4:
PL/SQL: ORA-00907: missing right parenthesis
Warning ORA-06550: line 221, column 3:
PL/SQL: SQL Statement ignored
Warning ORA-06550: line 3112, column 132:
PLS-00103: Encountered the symbol "DD" when expecting one of the following:
. ( ) , * @ % & | = - + < / > at in is mod remainder not
range rem => .. <an exponent (**)> <> or != or ~= >= <= <>
and or like LIKE2_ LIKE4_ LIKEC_ between || multiset member
SUBMULTISET_
The symbol "." was substituted for "DD" to continue.
When I look at the generated code, there are lines like this one:
not (wb_to_date("table"."column", Month dd, RRRR, Mon dd, RRRR, MM-DD-RRRR, MM/DD/RRRR, YYYY-MM-DD, YYYY/MM/DD) is not null
Why is OWB not putting single quotes around the data formats from the built-in data rule? Is there something fundamental I'm missing in my warehouse model?

Hi
This is bug 5195315, which looks to be fixed in a 10.2 patch. If you can pick up the latest 10.2 patch there is like 3 years of fixes worth picking up.
Cheers
David

Listview Report: how to hide "no data found" message

Good evening everybody,
I use the "jquery mobile theme 50" and the "listview report" of it. The report always shows "no data found"-entry if the source query doesn't return any row.
Is there a way to suppress this entry in Apex? I can hide "no data found"-entry in html using CSS, but I don't want to have it in the html at all.
Has someone an idea?
Thanks a lot!
Jewgenij

Thank you very much for the answer!
Unfortunately it works only for desktop themes but doesn't for jquery mobile Theme 50 :-)
The help text for the listview's (jquery mobile Theme 50) property "No Data Found Message" is
Defines the text message that displays when the query does not return any rows. If no value is specified the text of the system message APEX.REGION.NO_DATA_FOUND_MESSAGE is used.
BR
JeMo

Disk Utility - Partition map needs repair because a data partition needs loader space.

I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
And in Terminal:
My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
Problems were found with the partition map which might prevent booting
Error: Partition map needs repair because a data partition needs loader space.
I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
** /dev/rdisk0s2 (NO WRITE)
Can't open /dev/rdisk0s2: Permission denied
That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!

Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
I am hoping to fix it using an external Yosemite installation media: see this guide -
http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
And as a last resort to reinstall.
I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
Otherwise you can file it safely under software design calamity.

I need help to hide system data in service desk message

We want to our service desk message has so view:
Description AS2_SMS 09.06.2010 10:40:09
test sen
test sen
But it include very many technical info and view so:
Description AS2_SMS 09.06.2010 10:40:09
test sen
test sen
System Data ... 09.06.2010 10:40:10
SY-DBSYS................ ORACLE ...
SY-HOST................. ...
SY-OPSYS................ SunOS ..
SY-SYSID................ ...
SY-MANDT................ 200
SY-UNAME................ ...
SY-DATUM................ 20100609
SY-UZEIT................ 123949
SY-ZONLO................ CET
SY-CALLD................
SY-CPROG................ SAPLSMTR_NAVIGATION
SY-DYNNR................ 0100
SY-REPID................ SAPLSMTR_NAVIGATION
SY-TCODE................
SY-MSG.................. 000
SLIC_SYSID.............. ...
SAP version............. 701
operating system........ SunOS
machine type............ i86pc
node name............... ...
SAP system id........... ...
database system......... ...
database name........... ...
database host........... ...
database owner.......... SAPSR3
rsyn....................
IP address.............. ...
kernel release.......... 701
database library........ OCI_102 (10.2.0.2.0)
kernel compiled......... ...
kernel patch level...... ...
supported SAP vers...... 700, 701
supported database...... ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.
valid OP system......... SunOS ...
OP system release....... 5.10
ABAP load version....... 1565
CUA load version........ 32
kernel kind............. opt
relinfo................. valid
hot package level....... 5
Компонент ПО/верс./подд. EA-APPL 600 0016
Компонент ПО/верс./подд. EA-DFPS 600 0016
Компонент ПО/верс./подд. EA-FINSERV 604 0004
Компонент ПО/верс./подд. EA-GLTRADE 600 0016
Компонент ПО/верс./подд. EA-HR 600 0045
How to hide System Data part? We use auth CRM_TXT_ID and set TEXTID = SU01 (without SUSD) but system data are included in message.
Edited by: Andrey Garshin on Jun 9, 2010 11:19 PM
Edited by: Andrey Garshin on Jun 9, 2010 11:54 PM

what is term - "scheme"? I don't meet that.
COMV_TEXT_PD is clear for all select.
but:
COMV_TEXT_AS - CRM_ORDERH :
01 Business Partner Text
02 Final Note
03 Header Memo for Predecessor
ASH_PCKI Packing Instructions - Header
IPM00001 IPM BP Text Supplier
ISA_AG01 ISA: Customer Request
OPSM0001 StandardText Sales Methodology
SUSH0001 Header Text and Response Text
not SUSD.
may be another COMV_TEXT*-? Where is it customize?
I find Text Determination Procedure (se73) - CRM_ORDERH-SUSD. But it for print header only, imho..

Problem in mapping from import manager to Data manager

hi friend's....I got a problem while mapping the data from import manager to Data manager .The problem is the data in import manager (i.e source hierarchy) will map to single filed in data manager ( i.e target hierarchy)..
Help me it will be great full to me
Regards
Yugandhar

Hi Ana,
If you have a hierarchy in this format:
N1            N2                 N3
A              A1                 A11
A              A2                 A21
A              A3                 A31
B              B1                 B11
Then u have to follow these steps for import.
1. Select source file and destination hierarchy table at top of import manager.
2. Go to Partitions tab (Second tab) Just above the tabs, if u click on the plus sign against your source file, you will see N1, N2 and N3. Cick on N1 and in partition tab, add N2 to right side by double clicking on N2.
3. Now add N3 to right side by double clicking on it.
4. Go to field mapping (Third tab). There you will see a field N1(Partition). Map this field to yourhierarchy field on destination side.
5. In value mapping (Below the field mapping), Expand your source hierarchy. Select all (ctrl + A). Click on "Add" button. Select "Add Branch as child" option.
6. Go to Matching tab (Fourth tab). only one field will be there. take ity on the right side. and select the import action as "Create".
7. Go to last tab. Click on import button.
Your hierarchy has been imported. You can check it in data manager (in hierarchy mode).
Hope this solves your problem.
Regards,
Dheeraj.

SQL SSRS 2008 DateTime Calendar Control and Oracle 10g Data Source

Hello. I am creating reports in SSRS 2008 using the calendar control for a date range. Let's say we select a start date of 3/3/2012. This parameter is sent into my SQL statement in the WHERE clause which is executed against an Oracle 10g database. All syntax has to be in SQL that Oracle understands, so no CONVERT or CAST.
The format of the date is throwing an error "ORA-01843: not a valid month" when I try to use the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= TO_DATE('3/03/2012', 'MM/DD/YYYY')
I get ORA-01722: invalid number when I try the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= >= TO_CHAR('3/03/2012', 'MM/DD/YYYY')
I cannot find a way to format the date parameter in SQL Server SSRS before it gets to the SQL to be executed in Oracle.
Please help.
Thanks,
Sunny

920616 wrote:
sb92075: I am showing you how Oracle renders the date if I do a simple select from the table from which I am trying to pull data. You are right, it sure doesn't prove anything other than how the date looks right out of the Oracle database, but hopefully, it will give a clue as to how I need my SSRS date parameter to work.
Hans Forbrich:
I get ORA-01722: invalid number when I try the following:
SELECT *
FROM TABLE
WHERE STARTDATE >= TO_CHAR('3/03/2012', 'MM/DD/YYYY')
Solomon:
It works. The problem is getting the parameter '3/3/2012' into a usable format for Oracle.
Let's assume an application is sending in '3/3/2012' which will be used in an Oracle query (no PL/SQL allowed, nor can I create functions, stored procedures, etc - only straight up SQL). How can I prepare the parameter to successfully do the compare on the Oracle Date field?
12:50:23 SQL> select TO_CHAR('03/03/2012', 'MM/DD/YYYY') from dual;
select TO_CHAR('03/03/2012', 'MM/DD/YYYY') from dual
ERROR at line 1:
ORA-01722: invalid number
12:51:00 SQL> ed
Wrote file afiedt.buf
1* select TO_DATE('03/03/2012', 'MM/DD/YYYY') from dual
12:51:20 SQL> /
TO_DATE('03/03/2012
2012-03-03 00:00:00

SD- conditions to be mapped to COPA value field data in BI

Hi Experts,
I have a req where in I have to map condition level Sales order data to some COPA value fields. Currently for one Sale order item there are multiple conditions that means multiple line items. But when I try to find the COPA value field for the same same (Sales order, Sales order item ) key I get only one line item.
This has to be done for BI integration, but needs to be done at the source system level.
So my questions are,
1) How can we get the condition level data from COPA? Is it possible to fetch the data at that granularity?
2) Is it possible to integrate SD & COPA data on condition level i.e. at Sales order, sales order item & condition level.

Hi,
In KEA0, Data structure tab click on pencil button (change view).
Then click on -> change
Now you will be able to select new value fields
Rememeber, after changing click on save, activate and then back button. system will ask for regeneration, click ok.
Regards
Raghu

How to hide the data in any object(keyfiguer)

hi expects,
What is the procedure to hide the data under an object. In my case i supposed to hide the data which is under Tax column, I don't want to be viewed by others. pl. help me in this.
thanks
vijay

If its on Report u can always hide the column - Keyfigure or Selection - Display - Hide......y do u want to have it on the report if it is to be hided in the first place?

Mapping webservice result to a Data Type

Hi,
I receive an array of String objects as a result of a webservice call. These String Objects are XML documents (but as String Object...). How can I take each element of the array and extract all tags values to be mapped to a pre-defined Data Type? Have I to implement a parser in an UDF? How can I do the same mapping for each array cell automatically?
Thanks!

Use a simple XSLT to extract the xml document from a particular string.
Suppose the response XML is like:
<OutputMessage>
<string></string>
</OutputMessage>
Your xslt would be something like:
<xsl:template match="/OutputMessage/string">
<xsl:value-of select="." disable-output-escaping="yes"/>
</xsl:template>
If you have more than 1 string, create a root tag and extract all of them inside that tag.
Regards,
Henrique.

SSRS 2008r2 ESRI Maps - Wo to Hide Spacial Data

Similar Messages

Maybe you are looking for